xref: /freebsd/sys/powerpc/powermac/vcoregpio.c (revision 148a8da8)
1 /*-
2  * SPDX-License-Identifier: BSD-2-Clause-FreeBSD
3  *
4  * Copyright (c) 2009 Nathan Whitehorn
5  * All rights reserved.
6  *
7  * Redistribution and use in source and binary forms, with or without
8  * modification, are permitted provided that the following conditions
9  * are met:
10  * 1. Redistributions of source code must retain the above copyright
11  *    notice, this list of conditions and the following disclaimer.
12  * 2. Redistributions in binary form must reproduce the above copyright
13  *    notice, this list of conditions and the following disclaimer in the
14  *    documentation and/or other materials provided with the distribution.
15  *
16  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
17  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
18  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
19  * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
20  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
21  * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
22  * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
23  * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
24  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
25  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
26  * SUCH DAMAGE.
27  *
28  */
29 
30 #include <sys/cdefs.h>
31 __FBSDID("$FreeBSD$");
32 
33 #include <sys/param.h>
34 #include <sys/systm.h>
35 #include <sys/module.h>
36 #include <sys/bus.h>
37 #include <sys/conf.h>
38 #include <sys/cpu.h>
39 #include <sys/kernel.h>
40 #include <sys/sysctl.h>
41 
42 #include <dev/ofw/ofw_bus.h>
43 #include <dev/ofw/openfirm.h>
44 
45 #include <powerpc/powermac/macgpiovar.h>
46 
47 static int	vcoregpio_probe(device_t);
48 static int	vcoregpio_attach(device_t);
49 static void	vcoregpio_pre_change(device_t, const struct cf_level *level);
50 static void	vcoregpio_post_change(device_t, const struct cf_level *level);
51 
52 static device_method_t  vcoregpio_methods[] = {
53 	/* Device interface */
54 	DEVMETHOD(device_probe,		vcoregpio_probe),
55 	DEVMETHOD(device_attach,	vcoregpio_attach),
56 	{ 0, 0 },
57 };
58 
59 static driver_t vcoregpio_driver = {
60 	"vcoregpio",
61 	vcoregpio_methods,
62 	0
63 };
64 
65 static devclass_t vcoregpio_devclass;
66 
67 DRIVER_MODULE(vcoregpio, macgpio, vcoregpio_driver, vcoregpio_devclass, 0, 0);
68 
69 static int
70 vcoregpio_probe(device_t dev)
71 {
72 	const char *name = ofw_bus_get_name(dev);
73 
74 	if (strcmp(name, "cpu-vcore-select") != 0)
75 		return (ENXIO);
76 
77 	device_set_desc(dev, "CPU Core Voltage Control");
78 	return (0);
79 }
80 
81 static int
82 vcoregpio_attach(device_t dev)
83 {
84 	EVENTHANDLER_REGISTER(cpufreq_pre_change, vcoregpio_pre_change, dev,
85 	    EVENTHANDLER_PRI_ANY);
86 	EVENTHANDLER_REGISTER(cpufreq_post_change, vcoregpio_post_change, dev,
87 	    EVENTHANDLER_PRI_ANY);
88 
89 	return (0);
90 }
91 
92 static void
93 vcoregpio_pre_change(device_t dev, const struct cf_level *level)
94 {
95 	if (level->rel_set[0].freq == 10000 /* max */) {
96 		/*
97 		 * Make sure the CPU voltage is raised before we raise
98 		 * the clock.
99 		 */
100 		macgpio_write(dev, GPIO_DDR_OUTPUT | 1);
101 		DELAY(1000);
102 	}
103 }
104 
105 static void
106 vcoregpio_post_change(device_t dev, const struct cf_level *level)
107 {
108 	if (level->rel_set[0].freq < 10000 /* max */) {
109 		DELAY(1000);
110 		/* We are safe to reduce CPU voltage now */
111 		macgpio_write(dev, GPIO_DDR_OUTPUT | 0);
112 	}
113 }
114 
115