xref: /freebsd/sys/powerpc/powermac/vcoregpio.c (revision 3157ba21)
1 /*-
2  * Copyright (c) 2009 Nathan Whitehorn
3  * All rights reserved.
4  *
5  * Redistribution and use in source and binary forms, with or without
6  * modification, are permitted provided that the following conditions
7  * are met:
8  * 1. Redistributions of source code must retain the above copyright
9  *    notice, this list of conditions and the following disclaimer.
10  * 2. Redistributions in binary form must reproduce the above copyright
11  *    notice, this list of conditions and the following disclaimer in the
12  *    documentation and/or other materials provided with the distribution.
13  *
14  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
15  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
16  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
17  * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
18  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
19  * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
20  * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
21  * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
22  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
23  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
24  * SUCH DAMAGE.
25  *
26  */
27 
28 #include <sys/cdefs.h>
29 __FBSDID("$FreeBSD$");
30 
31 #include <sys/param.h>
32 #include <sys/systm.h>
33 #include <sys/module.h>
34 #include <sys/bus.h>
35 #include <sys/conf.h>
36 #include <sys/cpu.h>
37 #include <sys/kernel.h>
38 #include <sys/sysctl.h>
39 
40 #include <dev/ofw/ofw_bus.h>
41 #include <dev/ofw/openfirm.h>
42 
43 #include <powerpc/powermac/macgpiovar.h>
44 
45 static int	vcoregpio_probe(device_t);
46 static int	vcoregpio_attach(device_t);
47 static void	vcoregpio_pre_change(device_t, const struct cf_level *level);
48 static void	vcoregpio_post_change(device_t, const struct cf_level *level);
49 
50 static device_method_t  vcoregpio_methods[] = {
51 	/* Device interface */
52 	DEVMETHOD(device_probe,		vcoregpio_probe),
53 	DEVMETHOD(device_attach,	vcoregpio_attach),
54 	{ 0, 0 },
55 };
56 
57 static driver_t vcoregpio_driver = {
58 	"vcoregpio",
59 	vcoregpio_methods,
60 	0
61 };
62 
63 static devclass_t vcoregpio_devclass;
64 
65 DRIVER_MODULE(vcoregpio, macgpio, vcoregpio_driver, vcoregpio_devclass, 0, 0);
66 
67 static int
68 vcoregpio_probe(device_t dev)
69 {
70 	const char *name = ofw_bus_get_name(dev);
71 
72 	if (strcmp(name, "cpu-vcore-select") != 0)
73 		return (ENXIO);
74 
75 	device_set_desc(dev, "CPU Core Voltage Control");
76 	return (0);
77 }
78 
79 static int
80 vcoregpio_attach(device_t dev)
81 {
82 	EVENTHANDLER_REGISTER(cpufreq_pre_change, vcoregpio_pre_change, dev,
83 	    EVENTHANDLER_PRI_ANY);
84 	EVENTHANDLER_REGISTER(cpufreq_post_change, vcoregpio_post_change, dev,
85 	    EVENTHANDLER_PRI_ANY);
86 
87 	return (0);
88 }
89 
90 static void
91 vcoregpio_pre_change(device_t dev, const struct cf_level *level)
92 {
93 	if (level->rel_set[0].freq == 10000 /* max */) {
94 		/*
95 		 * Make sure the CPU voltage is raised before we raise
96 		 * the clock.
97 		 */
98 		macgpio_write(dev, GPIO_DDR_OUTPUT | 1);
99 		DELAY(1000);
100 	}
101 }
102 
103 static void
104 vcoregpio_post_change(device_t dev, const struct cf_level *level)
105 {
106 	if (level->rel_set[0].freq < 10000 /* max */) {
107 		DELAY(1000);
108 		/* We are safe to reduce CPU voltage now */
109 		macgpio_write(dev, GPIO_DDR_OUTPUT | 0);
110 	}
111 }
112 
113