1 /*- 2 * Copyright (c) 2015-2016 Nathan Whitehorn 3 * Copyright (c) 2017-2018 Semihalf 4 * All rights reserved. 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions 8 * are met: 9 * 1. Redistributions of source code must retain the above copyright 10 * notice, this list of conditions and the following disclaimer. 11 * 2. Redistributions in binary form must reproduce the above copyright 12 * notice, this list of conditions and the following disclaimer in the 13 * documentation and/or other materials provided with the distribution. 14 * 15 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 16 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 17 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 18 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 19 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 20 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 21 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 22 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 23 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 24 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 25 * SUCH DAMAGE. 26 */ 27 28 #include <sys/cdefs.h> 29 __FBSDID("$FreeBSD$"); 30 #include <sys/param.h> 31 #include <sys/systm.h> 32 #include <sys/module.h> 33 #include <sys/bus.h> 34 #include <sys/conf.h> 35 #include <sys/kernel.h> 36 #include <sys/pciio.h> 37 #include <sys/endian.h> 38 #include <sys/rman.h> 39 #include <sys/vmem.h> 40 41 #include <dev/ofw/openfirm.h> 42 #include <dev/ofw/ofw_pci.h> 43 #include <dev/ofw/ofw_bus.h> 44 #include <dev/ofw/ofw_bus_subr.h> 45 #include <dev/ofw/ofwpci.h> 46 47 #include <dev/pci/pcivar.h> 48 #include <dev/pci/pcireg.h> 49 50 #include <machine/bus.h> 51 #include <machine/intr_machdep.h> 52 #include <machine/md_var.h> 53 54 #include <vm/vm.h> 55 #include <vm/pmap.h> 56 57 #include "pcib_if.h" 58 #include "pic_if.h" 59 #include "iommu_if.h" 60 #include "opal.h" 61 62 #define OPAL_PCI_TCE_MAX_ENTRIES (1024*1024UL) 63 #define OPAL_PCI_TCE_DEFAULT_SEG_SIZE (16*1024*1024UL) 64 #define OPAL_PCI_TCE_R (1UL << 0) 65 #define OPAL_PCI_TCE_W (1UL << 1) 66 #define PHB3_TCE_KILL_INVAL_ALL (1UL << 63) 67 68 /* 69 * Device interface. 70 */ 71 static int opalpci_probe(device_t); 72 static int opalpci_attach(device_t); 73 74 /* 75 * pcib interface. 76 */ 77 static uint32_t opalpci_read_config(device_t, u_int, u_int, u_int, 78 u_int, int); 79 static void opalpci_write_config(device_t, u_int, u_int, u_int, 80 u_int, u_int32_t, int); 81 static int opalpci_alloc_msi(device_t dev, device_t child, 82 int count, int maxcount, int *irqs); 83 static int opalpci_release_msi(device_t dev, device_t child, 84 int count, int *irqs); 85 static int opalpci_alloc_msix(device_t dev, device_t child, 86 int *irq); 87 static int opalpci_release_msix(device_t dev, device_t child, 88 int irq); 89 static int opalpci_map_msi(device_t dev, device_t child, 90 int irq, uint64_t *addr, uint32_t *data); 91 static int opalpci_route_interrupt(device_t bus, device_t dev, int pin); 92 93 /* 94 * MSI PIC interface. 95 */ 96 static void opalpic_pic_enable(device_t dev, u_int irq, u_int vector, void **); 97 static void opalpic_pic_eoi(device_t dev, u_int irq, void *); 98 99 /* Bus interface */ 100 static bus_dma_tag_t opalpci_get_dma_tag(device_t dev, device_t child); 101 102 /* 103 * Commands 104 */ 105 #define OPAL_M32_WINDOW_TYPE 1 106 #define OPAL_M64_WINDOW_TYPE 2 107 #define OPAL_IO_WINDOW_TYPE 3 108 109 #define OPAL_RESET_PHB_COMPLETE 1 110 #define OPAL_RESET_PCI_IODA_TABLE 6 111 112 #define OPAL_DISABLE_M64 0 113 #define OPAL_ENABLE_M64_SPLIT 1 114 #define OPAL_ENABLE_M64_NON_SPLIT 2 115 116 #define OPAL_EEH_ACTION_CLEAR_FREEZE_MMIO 1 117 #define OPAL_EEH_ACTION_CLEAR_FREEZE_DMA 2 118 #define OPAL_EEH_ACTION_CLEAR_FREEZE_ALL 3 119 120 /* 121 * Constants 122 */ 123 #define OPAL_PCI_DEFAULT_PE 1 124 125 #define OPAL_PCI_BUS_SPACE_LOWADDR_32BIT 0x7FFFFFFFUL 126 127 /* 128 * Driver methods. 129 */ 130 static device_method_t opalpci_methods[] = { 131 /* Device interface */ 132 DEVMETHOD(device_probe, opalpci_probe), 133 DEVMETHOD(device_attach, opalpci_attach), 134 135 /* pcib interface */ 136 DEVMETHOD(pcib_read_config, opalpci_read_config), 137 DEVMETHOD(pcib_write_config, opalpci_write_config), 138 139 DEVMETHOD(pcib_alloc_msi, opalpci_alloc_msi), 140 DEVMETHOD(pcib_release_msi, opalpci_release_msi), 141 DEVMETHOD(pcib_alloc_msix, opalpci_alloc_msix), 142 DEVMETHOD(pcib_release_msix, opalpci_release_msix), 143 DEVMETHOD(pcib_map_msi, opalpci_map_msi), 144 DEVMETHOD(pcib_route_interrupt, opalpci_route_interrupt), 145 146 /* PIC interface for MSIs */ 147 DEVMETHOD(pic_enable, opalpic_pic_enable), 148 DEVMETHOD(pic_eoi, opalpic_pic_eoi), 149 150 /* Bus interface */ 151 DEVMETHOD(bus_get_dma_tag, opalpci_get_dma_tag), 152 153 DEVMETHOD_END 154 }; 155 156 struct opalpci_softc { 157 struct ofw_pci_softc ofw_sc; 158 uint64_t phb_id; 159 vmem_t *msi_vmem; 160 int msi_base; /* Base XIVE number */ 161 int base_msi_irq; /* Base IRQ assigned by FreeBSD to this PIC */ 162 uint64_t *tce; /* TCE table for 1:1 mapping */ 163 struct resource *r_reg; 164 }; 165 166 static devclass_t opalpci_devclass; 167 DEFINE_CLASS_1(pcib, opalpci_driver, opalpci_methods, 168 sizeof(struct opalpci_softc), ofw_pci_driver); 169 EARLY_DRIVER_MODULE(opalpci, ofwbus, opalpci_driver, opalpci_devclass, 0, 0, 170 BUS_PASS_BUS); 171 172 static int 173 opalpci_probe(device_t dev) 174 { 175 const char *type; 176 177 if (opal_check() != 0) 178 return (ENXIO); 179 180 type = ofw_bus_get_type(dev); 181 182 if (type == NULL || (strcmp(type, "pci") != 0 && 183 strcmp(type, "pciex") != 0)) 184 return (ENXIO); 185 186 if (!OF_hasprop(ofw_bus_get_node(dev), "ibm,opal-phbid")) 187 return (ENXIO); 188 189 device_set_desc(dev, "OPAL Host-PCI bridge"); 190 return (BUS_PROBE_GENERIC); 191 } 192 193 static void 194 pci_phb3_tce_invalidate_entire(struct opalpci_softc *sc) 195 { 196 197 mb(); 198 bus_write_8(sc->r_reg, 0x210, PHB3_TCE_KILL_INVAL_ALL); 199 mb(); 200 } 201 202 /* Simple function to round to a power of 2 */ 203 static uint64_t 204 round_pow2(uint64_t val) 205 { 206 207 return (1 << (flsl(val + (val - 1)) - 1)); 208 } 209 210 /* 211 * Starting with skiboot 5.10 PCIe nodes have a new property, 212 * "ibm,supported-tce-sizes", to denote the TCE sizes available. This allows us 213 * to avoid hard-coding the maximum TCE size allowed, and instead provide a sane 214 * default (however, the "sane" default, which works for all targets, is 64k, 215 * limiting us to 64GB if we have 1M entries. 216 */ 217 static uint64_t 218 max_tce_size(device_t dev) 219 { 220 phandle_t node; 221 cell_t sizes[64]; /* Property is a list of bit-widths, up to 64-bits */ 222 int count; 223 224 node = ofw_bus_get_node(dev); 225 226 count = OF_getencprop(node, "ibm,supported-tce-sizes", 227 sizes, sizeof(sizes)); 228 if (count < (int) sizeof(cell_t)) 229 return OPAL_PCI_TCE_DEFAULT_SEG_SIZE; 230 231 count /= sizeof(cell_t); 232 233 return (1ULL << sizes[count - 1]); 234 } 235 236 static int 237 opalpci_attach(device_t dev) 238 { 239 struct opalpci_softc *sc; 240 cell_t id[2], m64ranges[2], m64window[6], npe; 241 phandle_t node; 242 int i, err; 243 uint64_t maxmem; 244 uint64_t entries; 245 uint64_t tce_size; 246 uint64_t tce_tbl_size; 247 int m64bar; 248 int rid; 249 250 sc = device_get_softc(dev); 251 node = ofw_bus_get_node(dev); 252 253 switch (OF_getproplen(node, "ibm,opal-phbid")) { 254 case 8: 255 OF_getencprop(node, "ibm,opal-phbid", id, 8); 256 sc->phb_id = ((uint64_t)id[0] << 32) | id[1]; 257 break; 258 case 4: 259 OF_getencprop(node, "ibm,opal-phbid", id, 4); 260 sc->phb_id = id[0]; 261 break; 262 default: 263 device_printf(dev, "PHB ID property had wrong length (%zd)\n", 264 OF_getproplen(node, "ibm,opal-phbid")); 265 return (ENXIO); 266 } 267 268 if (bootverbose) 269 device_printf(dev, "OPAL ID %#lx\n", sc->phb_id); 270 271 rid = 0; 272 sc->r_reg = bus_alloc_resource_any(dev, SYS_RES_MEMORY, 273 &rid, RF_ACTIVE | RF_SHAREABLE); 274 if (sc->r_reg == NULL) { 275 device_printf(dev, "Failed to allocate PHB[%jd] registers\n", 276 (uintmax_t)sc->phb_id); 277 return (ENXIO); 278 } 279 280 #if 0 281 /* 282 * Reset PCI IODA table 283 */ 284 err = opal_call(OPAL_PCI_RESET, sc->phb_id, OPAL_RESET_PCI_IODA_TABLE, 285 1); 286 if (err != 0) { 287 device_printf(dev, "IODA table reset failed: %d\n", err); 288 return (ENXIO); 289 } 290 err = opal_call(OPAL_PCI_RESET, sc->phb_id, OPAL_RESET_PHB_COMPLETE, 291 1); 292 if (err < 0) { 293 device_printf(dev, "PHB reset failed: %d\n", err); 294 return (ENXIO); 295 } 296 if (err > 0) { 297 while ((err = opal_call(OPAL_PCI_POLL, sc->phb_id)) > 0) { 298 DELAY(1000*(err + 1)); /* Returns expected delay in ms */ 299 } 300 } 301 if (err < 0) { 302 device_printf(dev, "WARNING: PHB IODA reset poll failed: %d\n", err); 303 } 304 err = opal_call(OPAL_PCI_RESET, sc->phb_id, OPAL_RESET_PHB_COMPLETE, 305 0); 306 if (err < 0) { 307 device_printf(dev, "PHB reset failed: %d\n", err); 308 return (ENXIO); 309 } 310 if (err > 0) { 311 while ((err = opal_call(OPAL_PCI_POLL, sc->phb_id)) > 0) { 312 DELAY(1000*(err + 1)); /* Returns expected delay in ms */ 313 } 314 } 315 #endif 316 317 /* 318 * Map all devices on the bus to partitionable endpoint one until 319 * such time as we start wanting to do things like bhyve. 320 */ 321 err = opal_call(OPAL_PCI_SET_PE, sc->phb_id, OPAL_PCI_DEFAULT_PE, 322 0, OPAL_PCI_BUS_ANY, OPAL_IGNORE_RID_DEVICE_NUMBER, 323 OPAL_IGNORE_RID_FUNC_NUMBER, OPAL_MAP_PE); 324 if (err != 0) { 325 device_printf(dev, "PE mapping failed: %d\n", err); 326 return (ENXIO); 327 } 328 329 /* 330 * Turn on MMIO, mapped to PE 1 331 */ 332 if (OF_getencprop(node, "ibm,opal-num-pes", &npe, 4) != 4) 333 npe = 1; 334 for (i = 0; i < npe; i++) { 335 err = opal_call(OPAL_PCI_MAP_PE_MMIO_WINDOW, sc->phb_id, 336 OPAL_PCI_DEFAULT_PE, OPAL_M32_WINDOW_TYPE, 0, i); 337 if (err != 0) 338 device_printf(dev, "MMIO %d map failed: %d\n", i, err); 339 } 340 341 if (OF_getencprop(node, "ibm,opal-available-m64-ranges", 342 m64ranges, sizeof(m64ranges)) == sizeof(m64ranges)) 343 m64bar = m64ranges[0]; 344 else 345 m64bar = 0; 346 347 /* XXX: multiple M64 windows? */ 348 if (OF_getencprop(node, "ibm,opal-m64-window", 349 m64window, sizeof(m64window)) == sizeof(m64window)) { 350 opal_call(OPAL_PCI_PHB_MMIO_ENABLE, sc->phb_id, 351 OPAL_M64_WINDOW_TYPE, m64bar, 0); 352 opal_call(OPAL_PCI_SET_PHB_MEM_WINDOW, sc->phb_id, 353 OPAL_M64_WINDOW_TYPE, m64bar /* index */, 354 ((uint64_t)m64window[2] << 32) | m64window[3], 0, 355 ((uint64_t)m64window[4] << 32) | m64window[5]); 356 opal_call(OPAL_PCI_MAP_PE_MMIO_WINDOW, sc->phb_id, 357 OPAL_PCI_DEFAULT_PE, OPAL_M64_WINDOW_TYPE, 358 m64bar /* index */, 0); 359 opal_call(OPAL_PCI_PHB_MMIO_ENABLE, sc->phb_id, 360 OPAL_M64_WINDOW_TYPE, m64bar, OPAL_ENABLE_M64_NON_SPLIT); 361 } 362 363 /* 364 * Enable IOMMU for PE1 - map everything 1:1 using 365 * segments of max_tce_size size 366 */ 367 tce_size = max_tce_size(dev); 368 maxmem = roundup2(powerpc_ptob(Maxmem), tce_size); 369 entries = round_pow2(maxmem / tce_size); 370 tce_tbl_size = max(entries * sizeof(uint64_t), 4096); 371 if (entries > OPAL_PCI_TCE_MAX_ENTRIES) 372 panic("POWERNV supports only %jdGB of memory space\n", 373 (uintmax_t)((OPAL_PCI_TCE_MAX_ENTRIES * tce_size) >> 30)); 374 if (bootverbose) 375 device_printf(dev, "Mapping 0-%#jx for DMA\n", (uintmax_t)maxmem); 376 sc->tce = contigmalloc(tce_tbl_size, 377 M_DEVBUF, M_NOWAIT | M_ZERO, 0, 378 BUS_SPACE_MAXADDR, tce_tbl_size, 0); 379 if (sc->tce == NULL) 380 panic("Failed to allocate TCE memory for PHB %jd\n", 381 (uintmax_t)sc->phb_id); 382 383 for (i = 0; i < entries; i++) 384 sc->tce[i] = (i * tce_size) | OPAL_PCI_TCE_R | OPAL_PCI_TCE_W; 385 386 /* Map TCE for every PE. It seems necessary for Power8 */ 387 for (i = 0; i < npe; i++) { 388 err = opal_call(OPAL_PCI_MAP_PE_DMA_WINDOW, sc->phb_id, 389 i, (i << 1), 390 1, pmap_kextract((uint64_t)&sc->tce[0]), 391 tce_tbl_size, tce_size); 392 if (err != 0) { 393 device_printf(dev, "DMA IOMMU mapping failed: %d\n", err); 394 return (ENXIO); 395 } 396 397 err = opal_call(OPAL_PCI_MAP_PE_DMA_WINDOW_REAL, sc->phb_id, 398 i, (i << 1) + 1, 399 (1UL << 59), maxmem); 400 if (err != 0) { 401 device_printf(dev, "DMA 64b bypass mapping failed: %d\n", err); 402 return (ENXIO); 403 } 404 } 405 406 /* 407 * Invalidate all previous TCE entries. 408 * 409 * TODO: add support for other PHBs than PHB3 410 */ 411 pci_phb3_tce_invalidate_entire(sc); 412 413 /* 414 * Get MSI properties 415 */ 416 sc->msi_vmem = NULL; 417 if (OF_getproplen(node, "ibm,opal-msi-ranges") > 0) { 418 cell_t msi_ranges[2]; 419 OF_getencprop(node, "ibm,opal-msi-ranges", 420 msi_ranges, sizeof(msi_ranges)); 421 sc->msi_base = msi_ranges[0]; 422 423 sc->msi_vmem = vmem_create("OPAL MSI", msi_ranges[0], 424 msi_ranges[1], 1, 16, M_BESTFIT | M_WAITOK); 425 426 sc->base_msi_irq = powerpc_register_pic(dev, 427 OF_xref_from_node(node), 428 msi_ranges[0] + msi_ranges[1], 0, FALSE); 429 430 if (bootverbose) 431 device_printf(dev, "Supports %d MSIs starting at %d\n", 432 msi_ranges[1], msi_ranges[0]); 433 } 434 435 /* Create the parent DMA tag */ 436 /* 437 * Constrain it to POWER8 PHB (ioda2) for now. It seems to mess up on 438 * POWER9 systems. 439 */ 440 if (ofw_bus_is_compatible(dev, "ibm,ioda2-phb")) { 441 err = bus_dma_tag_create(bus_get_dma_tag(dev), /* parent */ 442 1, 0, /* alignment, bounds */ 443 OPAL_PCI_BUS_SPACE_LOWADDR_32BIT, /* lowaddr */ 444 BUS_SPACE_MAXADDR_32BIT, /* highaddr */ 445 NULL, NULL, /* filter, filterarg */ 446 BUS_SPACE_MAXSIZE, /* maxsize */ 447 BUS_SPACE_UNRESTRICTED, /* nsegments */ 448 BUS_SPACE_MAXSIZE, /* maxsegsize */ 449 0, /* flags */ 450 NULL, NULL, /* lockfunc, lockarg */ 451 &sc->ofw_sc.sc_dmat); 452 if (err != 0) { 453 device_printf(dev, "Failed to create DMA tag\n"); 454 return (err); 455 } 456 } 457 458 /* 459 * General OFW PCI attach 460 */ 461 err = ofw_pci_init(dev); 462 if (err != 0) 463 return (err); 464 465 /* 466 * Unfreeze non-config-space PCI operations. Let this fail silently 467 * if e.g. there is no current freeze. 468 */ 469 opal_call(OPAL_PCI_EEH_FREEZE_CLEAR, sc->phb_id, OPAL_PCI_DEFAULT_PE, 470 OPAL_EEH_ACTION_CLEAR_FREEZE_ALL); 471 472 /* 473 * OPAL stores 64-bit BARs in a special property rather than "ranges" 474 */ 475 if (OF_getencprop(node, "ibm,opal-m64-window", 476 m64window, sizeof(m64window)) == sizeof(m64window)) { 477 struct ofw_pci_range *rp; 478 479 sc->ofw_sc.sc_nrange++; 480 sc->ofw_sc.sc_range = realloc(sc->ofw_sc.sc_range, 481 sc->ofw_sc.sc_nrange * sizeof(sc->ofw_sc.sc_range[0]), 482 M_DEVBUF, M_WAITOK); 483 rp = &sc->ofw_sc.sc_range[sc->ofw_sc.sc_nrange-1]; 484 rp->pci_hi = OFW_PCI_PHYS_HI_SPACE_MEM64 | 485 OFW_PCI_PHYS_HI_PREFETCHABLE; 486 rp->pci = ((uint64_t)m64window[0] << 32) | m64window[1]; 487 rp->host = ((uint64_t)m64window[2] << 32) | m64window[3]; 488 rp->size = ((uint64_t)m64window[4] << 32) | m64window[5]; 489 rman_manage_region(&sc->ofw_sc.sc_mem_rman, rp->pci, 490 rp->pci + rp->size - 1); 491 } 492 493 return (ofw_pci_attach(dev)); 494 } 495 496 static uint32_t 497 opalpci_read_config(device_t dev, u_int bus, u_int slot, u_int func, u_int reg, 498 int width) 499 { 500 struct opalpci_softc *sc; 501 uint64_t config_addr; 502 uint8_t byte; 503 uint16_t half; 504 uint32_t word; 505 int error; 506 507 sc = device_get_softc(dev); 508 509 config_addr = (bus << 8) | ((slot & 0x1f) << 3) | (func & 0x7); 510 511 switch (width) { 512 case 1: 513 error = opal_call(OPAL_PCI_CONFIG_READ_BYTE, sc->phb_id, 514 config_addr, reg, vtophys(&byte)); 515 word = byte; 516 break; 517 case 2: 518 error = opal_call(OPAL_PCI_CONFIG_READ_HALF_WORD, sc->phb_id, 519 config_addr, reg, vtophys(&half)); 520 word = half; 521 break; 522 case 4: 523 error = opal_call(OPAL_PCI_CONFIG_READ_WORD, sc->phb_id, 524 config_addr, reg, vtophys(&word)); 525 break; 526 default: 527 error = OPAL_SUCCESS; 528 word = 0xffffffff; 529 } 530 531 /* 532 * Poking config state for non-existant devices can make 533 * the host bridge hang up. Clear any errors. 534 * 535 * XXX: Make this conditional on the existence of a freeze 536 */ 537 opal_call(OPAL_PCI_EEH_FREEZE_CLEAR, sc->phb_id, OPAL_PCI_DEFAULT_PE, 538 OPAL_EEH_ACTION_CLEAR_FREEZE_ALL); 539 540 if (error != OPAL_SUCCESS) 541 word = 0xffffffff; 542 543 return (word); 544 } 545 546 static void 547 opalpci_write_config(device_t dev, u_int bus, u_int slot, u_int func, 548 u_int reg, uint32_t val, int width) 549 { 550 struct opalpci_softc *sc; 551 uint64_t config_addr; 552 int error = OPAL_SUCCESS; 553 554 sc = device_get_softc(dev); 555 556 config_addr = (bus << 8) | ((slot & 0x1f) << 3) | (func & 0x7); 557 558 switch (width) { 559 case 1: 560 error = opal_call(OPAL_PCI_CONFIG_WRITE_BYTE, sc->phb_id, 561 config_addr, reg, val); 562 break; 563 case 2: 564 error = opal_call(OPAL_PCI_CONFIG_WRITE_HALF_WORD, sc->phb_id, 565 config_addr, reg, val); 566 break; 567 case 4: 568 error = opal_call(OPAL_PCI_CONFIG_WRITE_WORD, sc->phb_id, 569 config_addr, reg, val); 570 break; 571 } 572 573 if (error != OPAL_SUCCESS) { 574 /* 575 * Poking config state for non-existant devices can make 576 * the host bridge hang up. Clear any errors. 577 */ 578 opal_call(OPAL_PCI_EEH_FREEZE_CLEAR, sc->phb_id, 579 OPAL_PCI_DEFAULT_PE, OPAL_EEH_ACTION_CLEAR_FREEZE_ALL); 580 } 581 } 582 583 static int 584 opalpci_route_interrupt(device_t bus, device_t dev, int pin) 585 { 586 587 return (pin); 588 } 589 590 static int 591 opalpci_alloc_msi(device_t dev, device_t child, int count, int maxcount, 592 int *irqs) 593 { 594 struct opalpci_softc *sc; 595 vmem_addr_t start; 596 phandle_t xref; 597 int err, i; 598 599 sc = device_get_softc(dev); 600 if (sc->msi_vmem == NULL) 601 return (ENODEV); 602 603 err = vmem_xalloc(sc->msi_vmem, count, powerof2(count), 0, 0, 604 VMEM_ADDR_MIN, VMEM_ADDR_MAX, M_BESTFIT | M_WAITOK, &start); 605 606 if (err) 607 return (err); 608 609 xref = OF_xref_from_node(ofw_bus_get_node(dev)); 610 for (i = 0; i < count; i++) 611 irqs[i] = MAP_IRQ(xref, start + i); 612 613 return (0); 614 } 615 616 static int 617 opalpci_release_msi(device_t dev, device_t child, int count, int *irqs) 618 { 619 struct opalpci_softc *sc; 620 621 sc = device_get_softc(dev); 622 if (sc->msi_vmem == NULL) 623 return (ENODEV); 624 625 vmem_xfree(sc->msi_vmem, irqs[0] - sc->base_msi_irq, count); 626 return (0); 627 } 628 629 static int 630 opalpci_alloc_msix(device_t dev, device_t child, int *irq) 631 { 632 return (opalpci_alloc_msi(dev, child, 1, 1, irq)); 633 } 634 635 static int 636 opalpci_release_msix(device_t dev, device_t child, int irq) 637 { 638 return (opalpci_release_msi(dev, child, 1, &irq)); 639 } 640 641 static int 642 opalpci_map_msi(device_t dev, device_t child, int irq, uint64_t *addr, 643 uint32_t *data) 644 { 645 struct opalpci_softc *sc; 646 struct pci_devinfo *dinfo; 647 int err, xive; 648 649 sc = device_get_softc(dev); 650 if (sc->msi_vmem == NULL) 651 return (ENODEV); 652 653 xive = irq - sc->base_msi_irq - sc->msi_base; 654 opal_call(OPAL_PCI_SET_XIVE_PE, sc->phb_id, OPAL_PCI_DEFAULT_PE, xive); 655 656 dinfo = device_get_ivars(child); 657 if (dinfo->cfg.msi.msi_alloc > 0 && 658 (dinfo->cfg.msi.msi_ctrl & PCIM_MSICTRL_64BIT) == 0) { 659 uint32_t msi32; 660 err = opal_call(OPAL_GET_MSI_32, sc->phb_id, 661 OPAL_PCI_DEFAULT_PE, xive, 1, vtophys(&msi32), 662 vtophys(data)); 663 *addr = be32toh(msi32); 664 } else { 665 err = opal_call(OPAL_GET_MSI_64, sc->phb_id, 666 OPAL_PCI_DEFAULT_PE, xive, 1, vtophys(addr), vtophys(data)); 667 *addr = be64toh(*addr); 668 } 669 *data = be32toh(*data); 670 671 if (bootverbose && err != 0) 672 device_printf(child, "OPAL MSI mapping error: %d\n", err); 673 674 return ((err == 0) ? 0 : ENXIO); 675 } 676 677 static void 678 opalpic_pic_enable(device_t dev, u_int irq, u_int vector, void **priv) 679 { 680 struct opalpci_softc *sc = device_get_softc(dev); 681 682 PIC_ENABLE(root_pic, irq, vector, priv); 683 opal_call(OPAL_PCI_MSI_EOI, sc->phb_id, irq, priv); 684 } 685 686 static void opalpic_pic_eoi(device_t dev, u_int irq, void *priv) 687 { 688 struct opalpci_softc *sc; 689 690 sc = device_get_softc(dev); 691 opal_call(OPAL_PCI_MSI_EOI, sc->phb_id, irq); 692 693 PIC_EOI(root_pic, irq, priv); 694 } 695 696 static bus_dma_tag_t 697 opalpci_get_dma_tag(device_t dev, device_t child) 698 { 699 struct opalpci_softc *sc; 700 701 sc = device_get_softc(dev); 702 return (sc->ofw_sc.sc_dmat); 703 } 704