xref: /freebsd/sys/sys/priv.h (revision e28a4053)
1 /*-
2  * Copyright (c) 2006 nCircle Network Security, Inc.
3  * All rights reserved.
4  *
5  * This software was developed by Robert N. M. Watson for the TrustedBSD
6  * Project under contract to nCircle Network Security, Inc.
7  *
8  * Redistribution and use in source and binary forms, with or without
9  * modification, are permitted provided that the following conditions
10  * are met:
11  * 1. Redistributions of source code must retain the above copyright
12  *    notice, this list of conditions and the following disclaimer.
13  * 2. Redistributions in binary form must reproduce the above copyright
14  *    notice, this list of conditions and the following disclaimer in the
15  *    documentation and/or other materials provided with the distribution.
16  *
17  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
18  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
19  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
20  * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR, NCIRCLE NETWORK SECURITY,
21  * INC., OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
22  * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
23  * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
24  * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
25  * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
26  * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
27  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
28  *
29  * $FreeBSD$
30  */
31 
32 /*
33  * Privilege checking interface for BSD kernel.
34  */
35 #ifndef _SYS_PRIV_H_
36 #define	_SYS_PRIV_H_
37 
38 /*
39  * Privilege list, sorted loosely by kernel subsystem.
40  *
41  * Think carefully before adding or reusing one of these privileges -- are
42  * there existing instances referring to the same privilege?  Third party
43  * vendors may request the assignment of privileges to be used in loadable
44  * modules.  Particular numeric privilege assignments are part of the
45  * loadable kernel module ABI, and should not be changed across minor
46  * releases.
47  *
48  * When adding a new privilege, remember to determine if it's appropriate for
49  * use in jail, and update the privilege switch in kern_jail.c as necessary.
50  */
51 
52 /*
53  * Track beginning of privilege list.
54  */
55 #define	_PRIV_LOWEST	1
56 
57 /*
58  * The remaining privileges typically correspond to one or a small
59  * number of specific privilege checks, and have (relatively) precise
60  * meanings.  They are loosely sorted into a set of base system
61  * privileges, such as the ability to reboot, and then loosely by
62  * subsystem, indicated by a subsystem name.
63  */
64 #define	_PRIV_ROOT		1	/* Removed. */
65 #define	PRIV_ACCT		2	/* Manage process accounting. */
66 #define	PRIV_MAXFILES		3	/* Exceed system open files limit. */
67 #define	PRIV_MAXPROC		4	/* Exceed system processes limit. */
68 #define	PRIV_KTRACE		5	/* Set/clear KTRFAC_ROOT on ktrace. */
69 #define	PRIV_SETDUMPER		6	/* Configure dump device. */
70 #define	PRIV_REBOOT		8	/* Can reboot system. */
71 #define	PRIV_SWAPON		9	/* Can swapon(). */
72 #define	PRIV_SWAPOFF		10	/* Can swapoff(). */
73 #define	PRIV_MSGBUF		11	/* Can read kernel message buffer. */
74 #define	PRIV_IO			12	/* Can perform low-level I/O. */
75 #define	PRIV_KEYBOARD		13	/* Reprogram keyboard. */
76 #define	PRIV_DRIVER		14	/* Low-level driver privilege. */
77 #define	PRIV_ADJTIME		15	/* Set time adjustment. */
78 #define	PRIV_NTP_ADJTIME	16	/* Set NTP time adjustment. */
79 #define	PRIV_CLOCK_SETTIME	17	/* Can call clock_settime. */
80 #define	PRIV_SETTIMEOFDAY	18	/* Can call settimeofday. */
81 #define	_PRIV_SETHOSTID		19	/* Removed. */
82 #define	_PRIV_SETDOMAINNAME	20	/* Removed. */
83 
84 /*
85  * Audit subsystem privileges.
86  */
87 #define	PRIV_AUDIT_CONTROL	40	/* Can configure audit. */
88 #define	PRIV_AUDIT_FAILSTOP	41	/* Can run during audit fail stop. */
89 #define	PRIV_AUDIT_GETAUDIT	42	/* Can get proc audit properties. */
90 #define	PRIV_AUDIT_SETAUDIT	43	/* Can set proc audit properties. */
91 #define	PRIV_AUDIT_SUBMIT	44	/* Can submit an audit record. */
92 
93 /*
94  * Credential management privileges.
95  */
96 #define	PRIV_CRED_SETUID	50	/* setuid. */
97 #define	PRIV_CRED_SETEUID	51	/* seteuid to !ruid and !svuid. */
98 #define	PRIV_CRED_SETGID	52	/* setgid. */
99 #define	PRIV_CRED_SETEGID	53	/* setgid to !rgid and !svgid. */
100 #define	PRIV_CRED_SETGROUPS	54	/* Set process additional groups. */
101 #define	PRIV_CRED_SETREUID	55	/* setreuid. */
102 #define	PRIV_CRED_SETREGID	56	/* setregid. */
103 #define	PRIV_CRED_SETRESUID	57	/* setresuid. */
104 #define	PRIV_CRED_SETRESGID	58	/* setresgid. */
105 #define	PRIV_SEEOTHERGIDS	59	/* Exempt bsd.seeothergids. */
106 #define	PRIV_SEEOTHERUIDS	60	/* Exempt bsd.seeotheruids. */
107 
108 /*
109  * Debugging privileges.
110  */
111 #define	PRIV_DEBUG_DIFFCRED	80	/* Exempt debugging other users. */
112 #define	PRIV_DEBUG_SUGID	81	/* Exempt debugging setuid proc. */
113 #define	PRIV_DEBUG_UNPRIV	82	/* Exempt unprivileged debug limit. */
114 
115 /*
116  * Dtrace privileges.
117  */
118 #define	PRIV_DTRACE_KERNEL	90	/* Allow use of DTrace on the kernel. */
119 #define	PRIV_DTRACE_PROC	91	/* Allow attaching DTrace to process. */
120 #define	PRIV_DTRACE_USER	92	/* Process may submit DTrace events. */
121 
122 /*
123  * Firmware privilegs.
124  */
125 #define	PRIV_FIRMWARE_LOAD	100	/* Can load firmware. */
126 
127 /*
128  * Jail privileges.
129  */
130 #define	PRIV_JAIL_ATTACH	110	/* Attach to a jail. */
131 #define	PRIV_JAIL_SET		111	/* Set jail parameters. */
132 #define	PRIV_JAIL_REMOVE	112	/* Remove a jail. */
133 
134 /*
135  * Kernel environment priveleges.
136  */
137 #define	PRIV_KENV_SET		120	/* Set kernel env. variables. */
138 #define	PRIV_KENV_UNSET		121	/* Unset kernel env. variables. */
139 
140 /*
141  * Loadable kernel module privileges.
142  */
143 #define	PRIV_KLD_LOAD		130	/* Load a kernel module. */
144 #define	PRIV_KLD_UNLOAD		131	/* Unload a kernel module. */
145 
146 /*
147  * Privileges associated with the MAC Framework and specific MAC policy
148  * modules.
149  */
150 #define	PRIV_MAC_PARTITION	140	/* Privilege in mac_partition policy. */
151 #define	PRIV_MAC_PRIVS		141	/* Privilege in the mac_privs policy. */
152 
153 /*
154  * Process-related privileges.
155  */
156 #define	PRIV_PROC_LIMIT		160	/* Exceed user process limit. */
157 #define	PRIV_PROC_SETLOGIN	161	/* Can call setlogin. */
158 #define	PRIV_PROC_SETRLIMIT	162	/* Can raise resources limits. */
159 
160 /* System V IPC privileges.
161  */
162 #define	PRIV_IPC_READ		170	/* Can override IPC read perm. */
163 #define	PRIV_IPC_WRITE		171	/* Can override IPC write perm. */
164 #define	PRIV_IPC_ADMIN		172	/* Can override IPC owner-only perm. */
165 #define	PRIV_IPC_MSGSIZE	173	/* Exempt IPC message queue limit. */
166 
167 /*
168  * POSIX message queue privileges.
169  */
170 #define	PRIV_MQ_ADMIN		180	/* Can override msgq owner-only perm. */
171 
172 /*
173  * Performance monitoring counter privileges.
174  */
175 #define	PRIV_PMC_MANAGE		190	/* Can administer PMC. */
176 #define	PRIV_PMC_SYSTEM		191	/* Can allocate a system-wide PMC. */
177 
178 /*
179  * Scheduling privileges.
180  */
181 #define	PRIV_SCHED_DIFFCRED	200	/* Exempt scheduling other users. */
182 #define	PRIV_SCHED_SETPRIORITY	201	/* Can set lower nice value for proc. */
183 #define	PRIV_SCHED_RTPRIO	202	/* Can set real time scheduling. */
184 #define	PRIV_SCHED_SETPOLICY	203	/* Can set scheduler policy. */
185 #define	PRIV_SCHED_SET		204	/* Can set thread scheduler. */
186 #define	PRIV_SCHED_SETPARAM	205	/* Can set thread scheduler params. */
187 #define	PRIV_SCHED_CPUSET	206	/* Can manipulate cpusets. */
188 #define	PRIV_SCHED_CPUSET_INTR	207	/* Can adjust IRQ to CPU binding. */
189 
190 /*
191  * POSIX semaphore privileges.
192  */
193 #define	PRIV_SEM_WRITE		220	/* Can override sem write perm. */
194 
195 /*
196  * Signal privileges.
197  */
198 #define	PRIV_SIGNAL_DIFFCRED	230	/* Exempt signalling other users. */
199 #define	PRIV_SIGNAL_SUGID	231	/* Non-conserv signal setuid proc. */
200 
201 /*
202  * Sysctl privileges.
203  */
204 #define	PRIV_SYSCTL_DEBUG	240	/* Can invoke sysctl.debug. */
205 #define	PRIV_SYSCTL_WRITE	241	/* Can write sysctls. */
206 #define	PRIV_SYSCTL_WRITEJAIL	242	/* Can write sysctls, jail permitted. */
207 
208 /*
209  * TTY privileges.
210  */
211 #define	PRIV_TTY_CONSOLE	250	/* Set console to tty. */
212 #define	PRIV_TTY_DRAINWAIT	251	/* Set tty drain wait time. */
213 #define	PRIV_TTY_DTRWAIT	252	/* Set DTR wait on tty. */
214 #define	PRIV_TTY_EXCLUSIVE	253	/* Override tty exclusive flag. */
215 #define	_PRIV_TTY_PRISON	254	/* Removed. */
216 #define	PRIV_TTY_STI		255	/* Simulate input on another tty. */
217 #define	PRIV_TTY_SETA		256	/* Set tty termios structure. */
218 
219 /*
220  * UFS-specific privileges.
221  */
222 #define	PRIV_UFS_EXTATTRCTL	270	/* Can configure EAs on UFS1. */
223 #define	PRIV_UFS_QUOTAOFF	271	/* quotaoff(). */
224 #define	PRIV_UFS_QUOTAON	272	/* quotaon(). */
225 #define	PRIV_UFS_SETUSE		273	/* setuse(). */
226 
227 /*
228  * ZFS-specific privileges.
229  */
230 #define	PRIV_ZFS_POOL_CONFIG	280	/* Can configure ZFS pools. */
231 #define	PRIV_ZFS_INJECT		281	/* Can inject faults in the ZFS fault
232 					   injection framework. */
233 #define	PRIV_ZFS_JAIL		282	/* Can attach/detach ZFS file systems
234 					   to/from jails. */
235 
236 /*
237  * NFS-specific privileges.
238  */
239 #define	PRIV_NFS_DAEMON		290	/* Can become the NFS daemon. */
240 #define	PRIV_NFS_LOCKD		291	/* Can become NFS lock daemon. */
241 
242 /*
243  * VFS privileges.
244  */
245 #define	PRIV_VFS_READ		310	/* Override vnode DAC read perm. */
246 #define	PRIV_VFS_WRITE		311	/* Override vnode DAC write perm. */
247 #define	PRIV_VFS_ADMIN		312	/* Override vnode DAC admin perm. */
248 #define	PRIV_VFS_EXEC		313	/* Override vnode DAC exec perm. */
249 #define	PRIV_VFS_LOOKUP		314	/* Override vnode DAC lookup perm. */
250 #define	PRIV_VFS_BLOCKRESERVE	315	/* Can use free block reserve. */
251 #define	PRIV_VFS_CHFLAGS_DEV	316	/* Can chflags() a device node. */
252 #define	PRIV_VFS_CHOWN		317	/* Can set user; group to non-member. */
253 #define	PRIV_VFS_CHROOT		318	/* chroot(). */
254 #define	PRIV_VFS_RETAINSUGID	319	/* Can retain sugid bits on change. */
255 #define	PRIV_VFS_EXCEEDQUOTA	320	/* Exempt from quota restrictions. */
256 #define	PRIV_VFS_EXTATTR_SYSTEM	321	/* Operate on system EA namespace. */
257 #define	PRIV_VFS_FCHROOT	322	/* fchroot(). */
258 #define	PRIV_VFS_FHOPEN		323	/* Can fhopen(). */
259 #define	PRIV_VFS_FHSTAT		324	/* Can fhstat(). */
260 #define	PRIV_VFS_FHSTATFS	325	/* Can fhstatfs(). */
261 #define	PRIV_VFS_GENERATION	326	/* stat() returns generation number. */
262 #define	PRIV_VFS_GETFH		327	/* Can retrieve file handles. */
263 #define	PRIV_VFS_GETQUOTA	328	/* getquota(). */
264 #define	PRIV_VFS_LINK		329	/* bsd.hardlink_check_uid */
265 #define	PRIV_VFS_MKNOD_BAD	330	/* Can mknod() to mark bad inodes. */
266 #define	PRIV_VFS_MKNOD_DEV	331	/* Can mknod() to create dev nodes. */
267 #define	PRIV_VFS_MKNOD_WHT	332	/* Can mknod() to create whiteout. */
268 #define	PRIV_VFS_MOUNT		333	/* Can mount(). */
269 #define	PRIV_VFS_MOUNT_OWNER	334	/* Can manage other users' file systems. */
270 #define	PRIV_VFS_MOUNT_EXPORTED	335	/* Can set MNT_EXPORTED on mount. */
271 #define	PRIV_VFS_MOUNT_PERM	336	/* Override dev node perms at mount. */
272 #define	PRIV_VFS_MOUNT_SUIDDIR	337	/* Can set MNT_SUIDDIR on mount. */
273 #define	PRIV_VFS_MOUNT_NONUSER	338	/* Can perform a non-user mount. */
274 #define	PRIV_VFS_SETGID		339	/* Can setgid if not in group. */
275 #define	PRIV_VFS_SETQUOTA	340	/* setquota(). */
276 #define	PRIV_VFS_STICKYFILE	341	/* Can set sticky bit on file. */
277 #define	PRIV_VFS_SYSFLAGS	342	/* Can modify system flags. */
278 #define	PRIV_VFS_UNMOUNT	343	/* Can unmount(). */
279 #define	PRIV_VFS_STAT		344	/* Override vnode MAC stat perm. */
280 
281 /*
282  * Virtual memory privileges.
283  */
284 #define	PRIV_VM_MADV_PROTECT	360	/* Can set MADV_PROTECT. */
285 #define	PRIV_VM_MLOCK		361	/* Can mlock(), mlockall(). */
286 #define	PRIV_VM_MUNLOCK		362	/* Can munlock(), munlockall(). */
287 #define	PRIV_VM_SWAP_NOQUOTA	363	/*
288 					 * Can override the global
289 					 * swap reservation limits.
290 					 */
291 #define	PRIV_VM_SWAP_NORLIMIT	364	/*
292 					 * Can override the per-uid
293 					 * swap reservation limits.
294 					 */
295 
296 /*
297  * Device file system privileges.
298  */
299 #define	PRIV_DEVFS_RULE		370	/* Can manage devfs rules. */
300 #define	PRIV_DEVFS_SYMLINK	371	/* Can create symlinks in devfs. */
301 
302 /*
303  * Random number generator privileges.
304  */
305 #define	PRIV_RANDOM_RESEED	380	/* Closing /dev/random reseeds. */
306 
307 /*
308  * Network stack privileges.
309  */
310 #define	PRIV_NET_BRIDGE		390	/* Administer bridge. */
311 #define	PRIV_NET_GRE		391	/* Administer GRE. */
312 #define	_PRIV_NET_PPP		392	/* Removed. */
313 #define	_PRIV_NET_SLIP		393	/* Removed. */
314 #define	PRIV_NET_BPF		394	/* Monitor BPF. */
315 #define	PRIV_NET_RAW		395	/* Open raw socket. */
316 #define	PRIV_NET_ROUTE		396	/* Administer routing. */
317 #define	PRIV_NET_TAP		397	/* Can open tap device. */
318 #define	PRIV_NET_SETIFMTU	398	/* Set interface MTU. */
319 #define	PRIV_NET_SETIFFLAGS	399	/* Set interface flags. */
320 #define	PRIV_NET_SETIFCAP	400	/* Set interface capabilities. */
321 #define	PRIV_NET_SETIFNAME	401	/* Set interface name. */
322 #define	PRIV_NET_SETIFMETRIC	402	/* Set interface metrics. */
323 #define	PRIV_NET_SETIFPHYS	403	/* Set interface physical layer prop. */
324 #define	PRIV_NET_SETIFMAC	404	/* Set interface MAC label. */
325 #define	PRIV_NET_ADDMULTI	405	/* Add multicast addr. to ifnet. */
326 #define	PRIV_NET_DELMULTI	406	/* Delete multicast addr. from ifnet. */
327 #define	PRIV_NET_HWIOCTL	407	/* Issue hardware ioctl on ifnet. */
328 #define	PRIV_NET_SETLLADDR	408	/* Set interface link-level address. */
329 #define	PRIV_NET_ADDIFGROUP	409	/* Add new interface group. */
330 #define	PRIV_NET_DELIFGROUP	410	/* Delete interface group. */
331 #define	PRIV_NET_IFCREATE	411	/* Create cloned interface. */
332 #define	PRIV_NET_IFDESTROY	412	/* Destroy cloned interface. */
333 #define	PRIV_NET_ADDIFADDR	413	/* Add protocol addr to interface. */
334 #define	PRIV_NET_DELIFADDR	414	/* Delete protocol addr on interface. */
335 #define	PRIV_NET_LAGG		415	/* Administer lagg interface. */
336 #define	PRIV_NET_GIF		416	/* Administer gif interface. */
337 #define	PRIV_NET_SETIFVNET	417	/* Move interface to vnet. */
338 #define	PRIV_NET_SETIFDESCR	418	/* Set interface description. */
339 
340 /*
341  * 802.11-related privileges.
342  */
343 #define	PRIV_NET80211_GETKEY	440	/* Query 802.11 keys. */
344 #define	PRIV_NET80211_MANAGE	441	/* Administer 802.11. */
345 
346 /*
347  * AppleTalk privileges.
348  */
349 #define	PRIV_NETATALK_RESERVEDPORT	450	/* Bind low port number. */
350 
351 /*
352  * ATM privileges.
353  */
354 #define	PRIV_NETATM_CFG		460
355 #define	PRIV_NETATM_ADD		461
356 #define	PRIV_NETATM_DEL		462
357 #define	PRIV_NETATM_SET		463
358 
359 /*
360  * Bluetooth privileges.
361  */
362 #define	PRIV_NETBLUETOOTH_RAW	470	/* Open raw bluetooth socket. */
363 
364 /*
365  * Netgraph and netgraph module privileges.
366  */
367 #define	PRIV_NETGRAPH_CONTROL	480	/* Open netgraph control socket. */
368 #define	PRIV_NETGRAPH_TTY	481	/* Configure tty for netgraph. */
369 
370 /*
371  * IPv4 and IPv6 privileges.
372  */
373 #define	PRIV_NETINET_RESERVEDPORT	490	/* Bind low port number. */
374 #define	PRIV_NETINET_IPFW	491	/* Administer IPFW firewall. */
375 #define	PRIV_NETINET_DIVERT	492	/* Open IP divert socket. */
376 #define	PRIV_NETINET_PF		493	/* Administer pf firewall. */
377 #define	PRIV_NETINET_DUMMYNET	494	/* Administer DUMMYNET. */
378 #define	PRIV_NETINET_CARP	495	/* Administer CARP. */
379 #define	PRIV_NETINET_MROUTE	496	/* Administer multicast routing. */
380 #define	PRIV_NETINET_RAW	497	/* Open netinet raw socket. */
381 #define	PRIV_NETINET_GETCRED	498	/* Query netinet pcb credentials. */
382 #define	PRIV_NETINET_ADDRCTRL6	499	/* Administer IPv6 address scopes. */
383 #define	PRIV_NETINET_ND6	500	/* Administer IPv6 neighbor disc. */
384 #define	PRIV_NETINET_SCOPE6	501	/* Administer IPv6 address scopes. */
385 #define	PRIV_NETINET_ALIFETIME6	502	/* Administer IPv6 address lifetimes. */
386 #define	PRIV_NETINET_IPSEC	503	/* Administer IPSEC. */
387 #define	PRIV_NETINET_REUSEPORT	504	/* Allow [rapid] port/address reuse. */
388 #define	PRIV_NETINET_SETHDROPTS	505	/* Set certain IPv4/6 header options. */
389 #define	PRIV_NETINET_BINDANY	506	/* Allow bind to any address. */
390 
391 /*
392  * IPX/SPX privileges.
393  */
394 #define	PRIV_NETIPX_RESERVEDPORT	520	/* Bind low port number. */
395 #define	PRIV_NETIPX_RAW		521	/* Open netipx raw socket. */
396 
397 /*
398  * NCP privileges.
399  */
400 #define	PRIV_NETNCP		530	/* Use another user's connection. */
401 
402 /*
403  * SMB privileges.
404  */
405 #define	PRIV_NETSMB		540	/* Use another user's connection. */
406 
407 /*
408  * VM86 privileges.
409  */
410 #define	PRIV_VM86_INTCALL	550	/* Allow invoking vm86 int handlers. */
411 
412 /*
413  * Set of reserved privilege values, which will be allocated to code as
414  * needed, in order to avoid renumbering later privileges due to insertion.
415  */
416 #define	_PRIV_RESERVED0		560
417 #define	_PRIV_RESERVED1		561
418 #define	_PRIV_RESERVED2		562
419 #define	_PRIV_RESERVED3		563
420 #define	_PRIV_RESERVED4		564
421 #define	_PRIV_RESERVED5		565
422 #define	_PRIV_RESERVED6		566
423 #define	_PRIV_RESERVED7		567
424 #define	_PRIV_RESERVED8		568
425 #define	_PRIV_RESERVED9		569
426 #define	_PRIV_RESERVED10	570
427 #define	_PRIV_RESERVED11	571
428 #define	_PRIV_RESERVED12	572
429 #define	_PRIV_RESERVED13	573
430 #define	_PRIV_RESERVED14	574
431 #define	_PRIV_RESERVED15	575
432 
433 /*
434  * Define a set of valid privilege numbers that can be used by loadable
435  * modules that don't yet have privilege reservations.  Ideally, these should
436  * not be used, since their meaning is opaque to any policies that are aware
437  * of specific privileges, such as jail, and as such may be arbitrarily
438  * denied.
439  */
440 #define	PRIV_MODULE0		600
441 #define	PRIV_MODULE1		601
442 #define	PRIV_MODULE2		602
443 #define	PRIV_MODULE3		603
444 #define	PRIV_MODULE4		604
445 #define	PRIV_MODULE5		605
446 #define	PRIV_MODULE6		606
447 #define	PRIV_MODULE7		607
448 #define	PRIV_MODULE8		608
449 #define	PRIV_MODULE9		609
450 #define	PRIV_MODULE10		610
451 #define	PRIV_MODULE11		611
452 #define	PRIV_MODULE12		612
453 #define	PRIV_MODULE13		613
454 #define	PRIV_MODULE14		614
455 #define	PRIV_MODULE15		615
456 
457 /*
458  * DDB(4) privileges.
459  */
460 #define	PRIV_DDB_CAPTURE	620	/* Allow reading of DDB capture log. */
461 
462 /*
463  * Arla/nnpfs privileges.
464  */
465 #define	PRIV_NNPFS_DEBUG	630	/* Perforn ARLA_VIOC_NNPFSDEBUG. */
466 
467 /*
468  * cpuctl(4) privileges.
469  */
470 #define PRIV_CPUCTL_WRMSR	640	/* Write model-specific register. */
471 #define PRIV_CPUCTL_UPDATE	641	/* Update cpu microcode. */
472 
473 /*
474  * Capi4BSD privileges.
475  */
476 #define	PRIV_C4B_RESET_CTLR	650	/* Load firmware, reset controller. */
477 #define	PRIV_C4B_TRACE		651	/* Unrestricted CAPI message tracing. */
478 
479 /*
480  * OpenAFS privileges.
481  */
482 #define	PRIV_AFS_ADMIN		660	/* Can change AFS client settings. */
483 #define	PRIV_AFS_DAEMON		661	/* Can become the AFS daemon. */
484 
485 /*
486  * Track end of privilege list.
487  */
488 #define	_PRIV_HIGHEST		662
489 
490 /*
491  * Validate that a named privilege is known by the privilege system.  Invalid
492  * privileges presented to the privilege system by a priv_check interface
493  * will result in a panic.  This is only approximate due to sparse allocation
494  * of the privilege space.
495  */
496 #define	PRIV_VALID(x)	((x) > _PRIV_LOWEST && (x) < _PRIV_HIGHEST)
497 
498 #ifdef _KERNEL
499 /*
500  * Privilege check interfaces, modeled after historic suser() interfaces, but
501  * with the addition of a specific privilege name.  No flags are currently
502  * defined for the API.  Historically, flags specified using the real uid
503  * instead of the effective uid, and whether or not the check should be
504  * allowed in jail.
505  */
506 struct thread;
507 struct ucred;
508 int	priv_check(struct thread *td, int priv);
509 int	priv_check_cred(struct ucred *cred, int priv, int flags);
510 #endif
511 
512 #endif /* !_SYS_PRIV_H_ */
513