1 /*- 2 * SPDX-License-Identifier: BSD-3-Clause 3 * 4 * Copyright (c) 1982, 1986, 1993 5 * The Regents of the University of California. All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. 12 * 2. Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in the 14 * documentation and/or other materials provided with the distribution. 15 * 3. Neither the name of the University nor the names of its contributors 16 * may be used to endorse or promote products derived from this software 17 * without specific prior written permission. 18 * 19 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND 20 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 21 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 22 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE 23 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 24 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 25 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 26 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 27 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 28 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 29 * SUCH DAMAGE. 30 */ 31 32 #ifndef _SYS_TIME_H_ 33 #define _SYS_TIME_H_ 34 35 #include <sys/_timeval.h> 36 #include <sys/types.h> 37 #include <sys/timespec.h> 38 #include <sys/_clock_id.h> 39 40 struct timezone { 41 int tz_minuteswest; /* minutes west of Greenwich */ 42 int tz_dsttime; /* type of dst correction */ 43 }; 44 #define DST_NONE 0 /* not on dst */ 45 #define DST_USA 1 /* USA style dst */ 46 #define DST_AUST 2 /* Australian style dst */ 47 #define DST_WET 3 /* Western European dst */ 48 #define DST_MET 4 /* Middle European dst */ 49 #define DST_EET 5 /* Eastern European dst */ 50 #define DST_CAN 6 /* Canada */ 51 52 #if __BSD_VISIBLE 53 struct bintime { 54 time_t sec; 55 uint64_t frac; 56 }; 57 58 static __inline void 59 bintime_addx(struct bintime *_bt, uint64_t _x) 60 { 61 uint64_t _u; 62 63 _u = _bt->frac; 64 _bt->frac += _x; 65 if (_u > _bt->frac) 66 _bt->sec++; 67 } 68 69 static __inline void 70 bintime_add(struct bintime *_bt, const struct bintime *_bt2) 71 { 72 uint64_t _u; 73 74 _u = _bt->frac; 75 _bt->frac += _bt2->frac; 76 if (_u > _bt->frac) 77 _bt->sec++; 78 _bt->sec += _bt2->sec; 79 } 80 81 static __inline void 82 bintime_sub(struct bintime *_bt, const struct bintime *_bt2) 83 { 84 uint64_t _u; 85 86 _u = _bt->frac; 87 _bt->frac -= _bt2->frac; 88 if (_u < _bt->frac) 89 _bt->sec--; 90 _bt->sec -= _bt2->sec; 91 } 92 93 static __inline void 94 bintime_mul(struct bintime *_bt, u_int _x) 95 { 96 uint64_t _p1, _p2; 97 98 _p1 = (_bt->frac & 0xffffffffull) * _x; 99 _p2 = (_bt->frac >> 32) * _x + (_p1 >> 32); 100 _bt->sec *= _x; 101 _bt->sec += (_p2 >> 32); 102 _bt->frac = (_p2 << 32) | (_p1 & 0xffffffffull); 103 } 104 105 static __inline void 106 bintime_shift(struct bintime *_bt, int _exp) 107 { 108 109 if (_exp > 0) { 110 _bt->sec <<= _exp; 111 _bt->sec |= _bt->frac >> (64 - _exp); 112 _bt->frac <<= _exp; 113 } else if (_exp < 0) { 114 _bt->frac >>= -_exp; 115 _bt->frac |= (uint64_t)_bt->sec << (64 + _exp); 116 _bt->sec >>= -_exp; 117 } 118 } 119 120 #define bintime_clear(a) ((a)->sec = (a)->frac = 0) 121 #define bintime_isset(a) ((a)->sec || (a)->frac) 122 #define bintime_cmp(a, b, cmp) \ 123 (((a)->sec == (b)->sec) ? \ 124 ((a)->frac cmp (b)->frac) : \ 125 ((a)->sec cmp (b)->sec)) 126 127 #define SBT_1S ((sbintime_t)1 << 32) 128 #define SBT_1M (SBT_1S * 60) 129 #define SBT_1MS (SBT_1S / 1000) 130 #define SBT_1US (SBT_1S / 1000000) 131 #define SBT_1NS (SBT_1S / 1000000000) /* beware rounding, see nstosbt() */ 132 #define SBT_MAX 0x7fffffffffffffffLL 133 134 static __inline int 135 sbintime_getsec(sbintime_t _sbt) 136 { 137 138 return (_sbt >> 32); 139 } 140 141 static __inline sbintime_t 142 bttosbt(const struct bintime _bt) 143 { 144 145 return (((sbintime_t)_bt.sec << 32) + (_bt.frac >> 32)); 146 } 147 148 static __inline struct bintime 149 sbttobt(sbintime_t _sbt) 150 { 151 struct bintime _bt; 152 153 _bt.sec = _sbt >> 32; 154 _bt.frac = _sbt << 32; 155 return (_bt); 156 } 157 158 /* 159 * Scaling functions for signed and unsigned 64-bit time using any 160 * 32-bit fraction: 161 */ 162 163 static __inline int64_t 164 __stime64_scale32_ceil(int64_t x, int32_t factor, int32_t divisor) 165 { 166 const int64_t rem = x % divisor; 167 168 return (x / divisor * factor + (rem * factor + divisor - 1) / divisor); 169 } 170 171 static __inline int64_t 172 __stime64_scale32_floor(int64_t x, int32_t factor, int32_t divisor) 173 { 174 const int64_t rem = x % divisor; 175 176 return (x / divisor * factor + (rem * factor) / divisor); 177 } 178 179 static __inline uint64_t 180 __utime64_scale32_ceil(uint64_t x, uint32_t factor, uint32_t divisor) 181 { 182 const uint64_t rem = x % divisor; 183 184 return (x / divisor * factor + (rem * factor + divisor - 1) / divisor); 185 } 186 187 static __inline uint64_t 188 __utime64_scale32_floor(uint64_t x, uint32_t factor, uint32_t divisor) 189 { 190 const uint64_t rem = x % divisor; 191 192 return (x / divisor * factor + (rem * factor) / divisor); 193 } 194 195 /* 196 * This function finds the common divisor between the two arguments, 197 * in powers of two. Use a macro, so the compiler will output a 198 * warning if the value overflows! 199 * 200 * Detailed description: 201 * 202 * Create a variable with 1's at the positions of the leading 0's 203 * starting at the least significant bit, producing 0 if none (e.g., 204 * 01011000 -> 0000 0111). Then these two variables are bitwise AND'ed 205 * together, to produce the greatest common power of two minus one. In 206 * the end add one to flip the value to the actual power of two (e.g., 207 * 0000 0111 + 1 -> 0000 1000). 208 */ 209 #define __common_powers_of_two(a, b) \ 210 ((~(a) & ((a) - 1) & ~(b) & ((b) - 1)) + 1) 211 212 /* 213 * Scaling functions for signed and unsigned 64-bit time assuming 214 * reducable 64-bit fractions to 32-bit fractions: 215 */ 216 217 static __inline int64_t 218 __stime64_scale64_ceil(int64_t x, int64_t factor, int64_t divisor) 219 { 220 const int64_t gcd = __common_powers_of_two(factor, divisor); 221 222 return (__stime64_scale32_ceil(x, factor / gcd, divisor / gcd)); 223 } 224 225 static __inline int64_t 226 __stime64_scale64_floor(int64_t x, int64_t factor, int64_t divisor) 227 { 228 const int64_t gcd = __common_powers_of_two(factor, divisor); 229 230 return (__stime64_scale32_floor(x, factor / gcd, divisor / gcd)); 231 } 232 233 static __inline uint64_t 234 __utime64_scale64_ceil(uint64_t x, uint64_t factor, uint64_t divisor) 235 { 236 const uint64_t gcd = __common_powers_of_two(factor, divisor); 237 238 return (__utime64_scale32_ceil(x, factor / gcd, divisor / gcd)); 239 } 240 241 static __inline uint64_t 242 __utime64_scale64_floor(uint64_t x, uint64_t factor, uint64_t divisor) 243 { 244 const uint64_t gcd = __common_powers_of_two(factor, divisor); 245 246 return (__utime64_scale32_floor(x, factor / gcd, divisor / gcd)); 247 } 248 249 /* 250 * Decimal<->sbt conversions. Multiplying or dividing by SBT_1NS 251 * results in large roundoff errors which sbttons() and nstosbt() 252 * avoid. Millisecond and microsecond functions are also provided for 253 * completeness. 254 * 255 * When converting from sbt to another unit, the result is always 256 * rounded down. When converting back to sbt the result is always 257 * rounded up. This gives the property that sbttoX(Xtosbt(y)) == y . 258 * 259 * The conversion functions can also handle negative values. 260 */ 261 #define SBT_DECLARE_CONVERSION_PAIR(name, units_per_second) \ 262 static __inline int64_t \ 263 sbtto##name(sbintime_t sbt) \ 264 { \ 265 return (__stime64_scale64_floor(sbt, units_per_second, SBT_1S)); \ 266 } \ 267 static __inline sbintime_t \ 268 name##tosbt(int64_t name) \ 269 { \ 270 return (__stime64_scale64_ceil(name, SBT_1S, units_per_second)); \ 271 } 272 273 SBT_DECLARE_CONVERSION_PAIR(ns, 1000000000) 274 SBT_DECLARE_CONVERSION_PAIR(us, 1000000) 275 SBT_DECLARE_CONVERSION_PAIR(ms, 1000) 276 277 /*- 278 * Background information: 279 * 280 * When converting between timestamps on parallel timescales of differing 281 * resolutions it is historical and scientific practice to round down rather 282 * than doing 4/5 rounding. 283 * 284 * The date changes at midnight, not at noon. 285 * 286 * Even at 15:59:59.999999999 it's not four'o'clock. 287 * 288 * time_second ticks after N.999999999 not after N.4999999999 289 */ 290 291 static __inline void 292 bintime2timespec(const struct bintime *_bt, struct timespec *_ts) 293 { 294 295 _ts->tv_sec = _bt->sec; 296 _ts->tv_nsec = __utime64_scale64_floor( 297 _bt->frac, 1000000000, 1ULL << 32) >> 32; 298 } 299 300 static __inline uint64_t 301 bintime2ns(const struct bintime *_bt) 302 { 303 uint64_t ret; 304 305 ret = (uint64_t)(_bt->sec) * (uint64_t)1000000000; 306 ret += __utime64_scale64_floor( 307 _bt->frac, 1000000000, 1ULL << 32) >> 32; 308 return (ret); 309 } 310 311 static __inline void 312 timespec2bintime(const struct timespec *_ts, struct bintime *_bt) 313 { 314 315 _bt->sec = _ts->tv_sec; 316 _bt->frac = __utime64_scale64_floor( 317 (uint64_t)_ts->tv_nsec << 32, 1ULL << 32, 1000000000); 318 } 319 320 static __inline void 321 bintime2timeval(const struct bintime *_bt, struct timeval *_tv) 322 { 323 324 _tv->tv_sec = _bt->sec; 325 _tv->tv_usec = __utime64_scale64_floor( 326 _bt->frac, 1000000, 1ULL << 32) >> 32; 327 } 328 329 static __inline void 330 timeval2bintime(const struct timeval *_tv, struct bintime *_bt) 331 { 332 333 _bt->sec = _tv->tv_sec; 334 _bt->frac = __utime64_scale64_floor( 335 (uint64_t)_tv->tv_usec << 32, 1ULL << 32, 1000000); 336 } 337 338 static __inline struct timespec 339 sbttots(sbintime_t _sbt) 340 { 341 struct timespec _ts; 342 343 _ts.tv_sec = _sbt >> 32; 344 _ts.tv_nsec = sbttons((uint32_t)_sbt); 345 return (_ts); 346 } 347 348 static __inline sbintime_t 349 tstosbt(struct timespec _ts) 350 { 351 352 return (((sbintime_t)_ts.tv_sec << 32) + nstosbt(_ts.tv_nsec)); 353 } 354 355 static __inline struct timeval 356 sbttotv(sbintime_t _sbt) 357 { 358 struct timeval _tv; 359 360 _tv.tv_sec = _sbt >> 32; 361 _tv.tv_usec = sbttous((uint32_t)_sbt); 362 return (_tv); 363 } 364 365 static __inline sbintime_t 366 tvtosbt(struct timeval _tv) 367 { 368 369 return (((sbintime_t)_tv.tv_sec << 32) + ustosbt(_tv.tv_usec)); 370 } 371 #endif /* __BSD_VISIBLE */ 372 373 #ifdef _KERNEL 374 /* 375 * Simple macros to convert ticks to milliseconds 376 * or microseconds and vice-versa. The answer 377 * will always be at least 1. Note the return 378 * value is a uint32_t however we step up the 379 * operations to 64 bit to avoid any overflow/underflow 380 * problems. 381 */ 382 #define TICKS_2_MSEC(t) max(1, (uint32_t)(hz == 1000) ? \ 383 (t) : (((uint64_t)(t) * (uint64_t)1000)/(uint64_t)hz)) 384 #define TICKS_2_USEC(t) max(1, (uint32_t)(hz == 1000) ? \ 385 ((t) * 1000) : (((uint64_t)(t) * (uint64_t)1000000)/(uint64_t)hz)) 386 #define MSEC_2_TICKS(m) max(1, (uint32_t)((hz == 1000) ? \ 387 (m) : ((uint64_t)(m) * (uint64_t)hz)/(uint64_t)1000)) 388 #define USEC_2_TICKS(u) max(1, (uint32_t)((hz == 1000) ? \ 389 ((u) / 1000) : ((uint64_t)(u) * (uint64_t)hz)/(uint64_t)1000000)) 390 391 #endif 392 /* Operations on timespecs */ 393 #define timespecclear(tvp) ((tvp)->tv_sec = (tvp)->tv_nsec = 0) 394 #define timespecisset(tvp) ((tvp)->tv_sec || (tvp)->tv_nsec) 395 #define timespeccmp(tvp, uvp, cmp) \ 396 (((tvp)->tv_sec == (uvp)->tv_sec) ? \ 397 ((tvp)->tv_nsec cmp (uvp)->tv_nsec) : \ 398 ((tvp)->tv_sec cmp (uvp)->tv_sec)) 399 400 #define timespecadd(tsp, usp, vsp) \ 401 do { \ 402 (vsp)->tv_sec = (tsp)->tv_sec + (usp)->tv_sec; \ 403 (vsp)->tv_nsec = (tsp)->tv_nsec + (usp)->tv_nsec; \ 404 if ((vsp)->tv_nsec >= 1000000000L) { \ 405 (vsp)->tv_sec++; \ 406 (vsp)->tv_nsec -= 1000000000L; \ 407 } \ 408 } while (0) 409 #define timespecsub(tsp, usp, vsp) \ 410 do { \ 411 (vsp)->tv_sec = (tsp)->tv_sec - (usp)->tv_sec; \ 412 (vsp)->tv_nsec = (tsp)->tv_nsec - (usp)->tv_nsec; \ 413 if ((vsp)->tv_nsec < 0) { \ 414 (vsp)->tv_sec--; \ 415 (vsp)->tv_nsec += 1000000000L; \ 416 } \ 417 } while (0) 418 #define timespecvalid_interval(tsp) ((tsp)->tv_sec >= 0 && \ 419 (tsp)->tv_nsec >= 0 && (tsp)->tv_nsec < 1000000000L) 420 421 #ifdef _KERNEL 422 423 /* Operations on timevals. */ 424 425 #define timevalclear(tvp) ((tvp)->tv_sec = (tvp)->tv_usec = 0) 426 #define timevalisset(tvp) ((tvp)->tv_sec || (tvp)->tv_usec) 427 #define timevalcmp(tvp, uvp, cmp) \ 428 (((tvp)->tv_sec == (uvp)->tv_sec) ? \ 429 ((tvp)->tv_usec cmp (uvp)->tv_usec) : \ 430 ((tvp)->tv_sec cmp (uvp)->tv_sec)) 431 432 /* timevaladd and timevalsub are not inlined */ 433 434 #endif /* _KERNEL */ 435 436 #ifndef _KERNEL /* NetBSD/OpenBSD compatible interfaces */ 437 438 #define timerclear(tvp) ((tvp)->tv_sec = (tvp)->tv_usec = 0) 439 #define timerisset(tvp) ((tvp)->tv_sec || (tvp)->tv_usec) 440 #define timercmp(tvp, uvp, cmp) \ 441 (((tvp)->tv_sec == (uvp)->tv_sec) ? \ 442 ((tvp)->tv_usec cmp (uvp)->tv_usec) : \ 443 ((tvp)->tv_sec cmp (uvp)->tv_sec)) 444 #define timeradd(tvp, uvp, vvp) \ 445 do { \ 446 (vvp)->tv_sec = (tvp)->tv_sec + (uvp)->tv_sec; \ 447 (vvp)->tv_usec = (tvp)->tv_usec + (uvp)->tv_usec; \ 448 if ((vvp)->tv_usec >= 1000000) { \ 449 (vvp)->tv_sec++; \ 450 (vvp)->tv_usec -= 1000000; \ 451 } \ 452 } while (0) 453 #define timersub(tvp, uvp, vvp) \ 454 do { \ 455 (vvp)->tv_sec = (tvp)->tv_sec - (uvp)->tv_sec; \ 456 (vvp)->tv_usec = (tvp)->tv_usec - (uvp)->tv_usec; \ 457 if ((vvp)->tv_usec < 0) { \ 458 (vvp)->tv_sec--; \ 459 (vvp)->tv_usec += 1000000; \ 460 } \ 461 } while (0) 462 #endif 463 464 /* 465 * Names of the interval timers, and structure 466 * defining a timer setting. 467 */ 468 #define ITIMER_REAL 0 469 #define ITIMER_VIRTUAL 1 470 #define ITIMER_PROF 2 471 472 struct itimerval { 473 struct timeval it_interval; /* timer interval */ 474 struct timeval it_value; /* current value */ 475 }; 476 477 /* 478 * Getkerninfo clock information structure 479 */ 480 struct clockinfo { 481 int hz; /* clock frequency */ 482 int tick; /* micro-seconds per hz tick */ 483 int spare; 484 int stathz; /* statistics clock frequency */ 485 int profhz; /* profiling clock frequency */ 486 }; 487 488 #if __BSD_VISIBLE 489 #define CPUCLOCK_WHICH_PID 0 490 #define CPUCLOCK_WHICH_TID 1 491 #endif 492 493 #if defined(_KERNEL) || defined(_STANDALONE) 494 495 /* 496 * Kernel to clock driver interface. 497 */ 498 void inittodr(time_t base); 499 void resettodr(void); 500 501 extern volatile time_t time_second; 502 extern volatile time_t time_uptime; 503 extern struct bintime tc_tick_bt; 504 extern sbintime_t tc_tick_sbt; 505 extern time_t tick_seconds_max; 506 extern struct bintime tick_bt; 507 extern sbintime_t tick_sbt; 508 extern int tc_precexp; 509 extern int tc_timepercentage; 510 extern struct bintime bt_timethreshold; 511 extern struct bintime bt_tickthreshold; 512 extern sbintime_t sbt_timethreshold; 513 extern sbintime_t sbt_tickthreshold; 514 515 extern volatile int rtc_generation; 516 517 /* 518 * Functions for looking at our clock: [get]{bin,nano,micro}[up]time() 519 * 520 * Functions without the "get" prefix returns the best timestamp 521 * we can produce in the given format. 522 * 523 * "bin" == struct bintime == seconds + 64 bit fraction of seconds. 524 * "nano" == struct timespec == seconds + nanoseconds. 525 * "micro" == struct timeval == seconds + microseconds. 526 * 527 * Functions containing "up" returns time relative to boot and 528 * should be used for calculating time intervals. 529 * 530 * Functions without "up" returns UTC time. 531 * 532 * Functions with the "get" prefix returns a less precise result 533 * much faster than the functions without "get" prefix and should 534 * be used where a precision of 1/hz seconds is acceptable or where 535 * performance is priority. (NB: "precision", _not_ "resolution" !) 536 */ 537 538 void binuptime(struct bintime *bt); 539 void nanouptime(struct timespec *tsp); 540 void microuptime(struct timeval *tvp); 541 542 static __inline sbintime_t 543 sbinuptime(void) 544 { 545 struct bintime _bt; 546 547 binuptime(&_bt); 548 return (bttosbt(_bt)); 549 } 550 551 void bintime(struct bintime *bt); 552 void nanotime(struct timespec *tsp); 553 void microtime(struct timeval *tvp); 554 555 void getbinuptime(struct bintime *bt); 556 void getnanouptime(struct timespec *tsp); 557 void getmicrouptime(struct timeval *tvp); 558 559 static __inline sbintime_t 560 getsbinuptime(void) 561 { 562 struct bintime _bt; 563 564 getbinuptime(&_bt); 565 return (bttosbt(_bt)); 566 } 567 568 void getbintime(struct bintime *bt); 569 void getnanotime(struct timespec *tsp); 570 void getmicrotime(struct timeval *tvp); 571 572 void getboottime(struct timeval *boottime); 573 void getboottimebin(struct bintime *boottimebin); 574 575 /* Other functions */ 576 int itimerdecr(struct itimerval *itp, int usec); 577 int itimerfix(struct timeval *tv); 578 int eventratecheck(struct timeval *, int *, int); 579 #define ppsratecheck(t, c, m) eventratecheck(t, c, m) 580 int ratecheck(struct timeval *, const struct timeval *); 581 void timevaladd(struct timeval *t1, const struct timeval *t2); 582 void timevalsub(struct timeval *t1, const struct timeval *t2); 583 int tvtohz(struct timeval *tv); 584 585 /* 586 * The following HZ limits allow the tvtohz() function 587 * to only use integer computations. 588 */ 589 #define HZ_MAXIMUM (INT_MAX / (1000000 >> 6)) /* 137kHz */ 590 #define HZ_MINIMUM 8 /* hz */ 591 592 #define TC_DEFAULTPERC 5 593 594 #define BT2FREQ(bt) \ 595 (((uint64_t)0x8000000000000000 + ((bt)->frac >> 2)) / \ 596 ((bt)->frac >> 1)) 597 598 #define SBT2FREQ(sbt) ((SBT_1S + ((sbt) >> 1)) / (sbt)) 599 600 #define FREQ2BT(freq, bt) \ 601 { \ 602 (bt)->sec = 0; \ 603 (bt)->frac = ((uint64_t)0x8000000000000000 / (freq)) << 1; \ 604 } 605 606 #define TIMESEL(sbt, sbt2) \ 607 (((sbt2) >= sbt_timethreshold) ? \ 608 ((*(sbt) = getsbinuptime()), 1) : ((*(sbt) = sbinuptime()), 0)) 609 610 #else /* !_KERNEL && !_STANDALONE */ 611 #include <time.h> 612 613 #include <sys/cdefs.h> 614 #include <sys/select.h> 615 616 __BEGIN_DECLS 617 int setitimer(int, const struct itimerval *, struct itimerval *); 618 int utimes(const char *, const struct timeval *); 619 620 #if __BSD_VISIBLE 621 int adjtime(const struct timeval *, struct timeval *); 622 int clock_getcpuclockid2(id_t, int, clockid_t *); 623 int futimes(int, const struct timeval *); 624 int futimesat(int, const char *, const struct timeval [2]); 625 int lutimes(const char *, const struct timeval *); 626 int settimeofday(const struct timeval *, const struct timezone *); 627 #endif 628 629 #if __XSI_VISIBLE 630 int getitimer(int, struct itimerval *); 631 int gettimeofday(struct timeval *, struct timezone *); 632 #endif 633 634 __END_DECLS 635 636 #endif /* !_KERNEL */ 637 638 #endif /* !_SYS_TIME_H_ */ 639