1 /*- 2 *********************************************************************** 3 * * 4 * Copyright (c) David L. Mills 1993-2001 * 5 * Copyright (c) Poul-Henning Kamp 2000-2001 * 6 * * 7 * Permission to use, copy, modify, and distribute this software and * 8 * its documentation for any purpose and without fee is hereby * 9 * granted, provided that the above copyright notice appears in all * 10 * copies and that both the copyright notice and this permission * 11 * notice appear in supporting documentation, and that the name * 12 * University of Delaware not be used in advertising or publicity * 13 * pertaining to distribution of the software without specific, * 14 * written prior permission. The University of Delaware makes no * 15 * representations about the suitability this software for any * 16 * purpose. It is provided "as is" without express or implied * 17 * warranty. * 18 * * 19 *********************************************************************** 20 * 21 * $FreeBSD$ 22 * 23 * This header file defines the Network Time Protocol (NTP) interfaces 24 * for user and daemon application programs. 25 * 26 * This file was originally created 17 Sep 93 by David L. Mills, Professor 27 * of University of Delaware, building on work which had already been ongoing 28 * for a decade and a half at that point in time. 29 * 30 * In 2000 the APIs got a upgrade from microseconds to nanoseconds, 31 * a joint work between Poul-Henning Kamp and David L. Mills. 32 * 33 */ 34 35 #ifndef _SYS_TIMEX_H_ 36 #define _SYS_TIMEX_H_ 1 37 38 #define NTP_API 4 /* NTP API version */ 39 40 #ifdef __FreeBSD__ 41 #include <sys/_timespec.h> 42 #endif /* __FreeBSD__ */ 43 44 /* 45 * The following defines establish the performance envelope of the 46 * kernel discipline loop. Phase or frequency errors greater than 47 * NAXPHASE or MAXFREQ are clamped to these maxima. For update intervals 48 * less than MINSEC, the loop always operates in PLL mode; while, for 49 * update intervals greater than MAXSEC, the loop always operates in FLL 50 * mode. Between these two limits the operating mode is selected by the 51 * STA_FLL bit in the status word. 52 */ 53 54 #define MAXPHASE 500000000L /* max phase error (ns) */ 55 #define MAXFREQ 500000L /* max freq error (ns/s) */ 56 #define MINSEC 256 /* min FLL update interval (s) */ 57 #define MAXSEC 2048 /* max PLL update interval (s) */ 58 #define NANOSECOND 1000000000L /* nanoseconds in one second */ 59 #define SCALE_PPM (65536 / 1000) /* crude ns/s to scaled PPM */ 60 #define MAXTC 10 /* max time constant */ 61 62 /* 63 * Control mode codes (timex.modes) 64 */ 65 #define MOD_OFFSET 0x0001 /* set time offset */ 66 #define MOD_FREQUENCY 0x0002 /* set frequency offset */ 67 #define MOD_MAXERROR 0x0004 /* set maximum time error */ 68 #define MOD_ESTERROR 0x0008 /* set estimated time error */ 69 #define MOD_STATUS 0x0010 /* set clock status bits */ 70 #define MOD_TIMECONST 0x0020 /* set PLL time constant */ 71 #define MOD_PPSMAX 0x0040 /* set PPS maximum averaging time */ 72 #define MOD_TAI 0x0080 /* set TAI offset */ 73 #define MOD_MICRO 0x1000 /* select microsecond resolution */ 74 #define MOD_NANO 0x2000 /* select nanosecond resolution */ 75 #define MOD_CLKB 0x4000 /* select clock B */ 76 #define MOD_CLKA 0x8000 /* select clock A */ 77 78 /* 79 * Status codes (timex.status) 80 */ 81 #define STA_PLL 0x0001 /* enable PLL updates (rw) */ 82 #define STA_PPSFREQ 0x0002 /* enable PPS freq discipline (rw) */ 83 #define STA_PPSTIME 0x0004 /* enable PPS time discipline (rw) */ 84 #define STA_FLL 0x0008 /* enable FLL mode (rw) */ 85 #define STA_INS 0x0010 /* insert leap (rw) */ 86 #define STA_DEL 0x0020 /* delete leap (rw) */ 87 #define STA_UNSYNC 0x0040 /* clock unsynchronized (rw) */ 88 #define STA_FREQHOLD 0x0080 /* hold frequency (rw) */ 89 #define STA_PPSSIGNAL 0x0100 /* PPS signal present (ro) */ 90 #define STA_PPSJITTER 0x0200 /* PPS signal jitter exceeded (ro) */ 91 #define STA_PPSWANDER 0x0400 /* PPS signal wander exceeded (ro) */ 92 #define STA_PPSERROR 0x0800 /* PPS signal calibration error (ro) */ 93 #define STA_CLOCKERR 0x1000 /* clock hardware fault (ro) */ 94 #define STA_NANO 0x2000 /* resolution (0 = us, 1 = ns) (ro) */ 95 #define STA_MODE 0x4000 /* mode (0 = PLL, 1 = FLL) (ro) */ 96 #define STA_CLK 0x8000 /* clock source (0 = A, 1 = B) (ro) */ 97 98 #define STA_RONLY (STA_PPSSIGNAL | STA_PPSJITTER | STA_PPSWANDER | \ 99 STA_PPSERROR | STA_CLOCKERR | STA_NANO | STA_MODE | STA_CLK) 100 101 /* 102 * Clock states (ntptimeval.time_state) 103 */ 104 #define TIME_OK 0 /* no leap second warning */ 105 #define TIME_INS 1 /* insert leap second warning */ 106 #define TIME_DEL 2 /* delete leap second warning */ 107 #define TIME_OOP 3 /* leap second in progress */ 108 #define TIME_WAIT 4 /* leap second has occurred */ 109 #define TIME_ERROR 5 /* error (see status word) */ 110 111 /* 112 * NTP user interface -- ntp_gettime(2) - used to read kernel clock values 113 */ 114 struct ntptimeval { 115 struct timespec time; /* current time (ns) (ro) */ 116 long maxerror; /* maximum error (us) (ro) */ 117 long esterror; /* estimated error (us) (ro) */ 118 long tai; /* TAI offset */ 119 int time_state; /* time status */ 120 }; 121 122 /* 123 * NTP daemon interface -- ntp_adjtime(2) -- used to discipline CPU clock 124 * oscillator and control/determine status. 125 * 126 * Note: The offset, precision and jitter members are in microseconds if 127 * STA_NANO is zero and nanoseconds if not. 128 */ 129 struct timex { 130 unsigned int modes; /* clock mode bits (wo) */ 131 long offset; /* time offset (ns/us) (rw) */ 132 long freq; /* frequency offset (scaled PPM) (rw) */ 133 long maxerror; /* maximum error (us) (rw) */ 134 long esterror; /* estimated error (us) (rw) */ 135 int status; /* clock status bits (rw) */ 136 long constant; /* poll interval (log2 s) (rw) */ 137 long precision; /* clock precision (ns/us) (ro) */ 138 long tolerance; /* clock frequency tolerance (scaled 139 * PPM) (ro) */ 140 /* 141 * The following read-only structure members are implemented 142 * only if the PPS signal discipline is configured in the 143 * kernel. They are included in all configurations to insure 144 * portability. 145 */ 146 long ppsfreq; /* PPS frequency (scaled PPM) (ro) */ 147 long jitter; /* PPS jitter (ns/us) (ro) */ 148 int shift; /* interval duration (s) (shift) (ro) */ 149 long stabil; /* PPS stability (scaled PPM) (ro) */ 150 long jitcnt; /* jitter limit exceeded (ro) */ 151 long calcnt; /* calibration intervals (ro) */ 152 long errcnt; /* calibration errors (ro) */ 153 long stbcnt; /* stability limit exceeded (ro) */ 154 }; 155 156 #ifdef __FreeBSD__ 157 158 #ifdef _KERNEL 159 void ntp_update_second(int64_t *adjustment, time_t *newsec); 160 #else /* !_KERNEL */ 161 #include <sys/cdefs.h> 162 163 __BEGIN_DECLS 164 int ntp_adjtime(struct timex *); 165 int ntp_gettime(struct ntptimeval *); 166 __END_DECLS 167 #endif /* _KERNEL */ 168 169 #endif /* __FreeBSD__ */ 170 171 #endif /* !_SYS_TIMEX_H_ */ 172