1 2 /* 3 * Copyright (c) 2010-2011 Adrian Chadd, Xenion Pty Ltd. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * 2. Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * 14 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 15 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 16 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 17 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 18 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 19 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 20 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 21 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 22 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 23 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 24 * SUCH DAMAGE. 25 * 26 * $FreeBSD$ 27 */ 28 29 #include <stdio.h> 30 #include <stdlib.h> 31 #include <unistd.h> 32 #include <string.h> 33 #include <sys/types.h> 34 #include <err.h> 35 36 typedef enum { 37 AH_FALSE = 0, /* NB: lots of code assumes false is zero */ 38 AH_TRUE = 1, 39 } HAL_BOOL; 40 41 typedef enum { 42 HAL_OK = 0, /* No error */ 43 } HAL_STATUS; 44 45 struct ath_hal; 46 47 #include "ah_eeprom_v4k.h" 48 49 void 50 eeprom_v4k_base_print(uint16_t *buf) 51 { 52 HAL_EEPROM_v4k *eep = (HAL_EEPROM_v4k *) buf; 53 BASE_EEP4K_HEADER *eh = &eep->ee_base.baseEepHeader; 54 55 printf("| Version: 0x%.4x | Length: 0x%.4x | Checksum: 0x%.4x ", 56 eh->version, eh->length, eh->checksum); 57 printf("| CapFlags: 0x%.2x | eepMisc: 0x%.2x | RegDomain: 0x%.4x 0x%.4x | \n", 58 eh->opCapFlags, eh->eepMisc, eh->regDmn[0], eh->regDmn[1]); 59 printf("| MAC: %.2x:%.2x:%.2x:%.2x:%.2x:%.2x ", 60 eh->macAddr[0], eh->macAddr[1], eh->macAddr[2], 61 eh->macAddr[3], eh->macAddr[4], eh->macAddr[5]); 62 printf("| RxMask: 0x%.2x | TxMask: 0x%.2x | RfSilent: 0x%.4x | btOptions: 0x%.4x |\n", 63 eh->rxMask, eh->txMask, eh->rfSilent, eh->blueToothOptions); 64 printf("| DeviceCap: 0x%.4x | binBuildNumber: %.8x | deviceType: 0x%.2x | txGainType 0x%.2x |\n", 65 eh->deviceCap, eh->binBuildNumber, eh->deviceType, eh->txGainType); 66 } 67 68 void 69 eeprom_v4k_custdata_print(uint16_t *buf) 70 { 71 HAL_EEPROM_v4k *eep = (HAL_EEPROM_v4k *) buf; 72 uint8_t *custdata = (uint8_t *) &eep->ee_base.custData; 73 int i; 74 75 printf("\n| Custdata: |\n"); 76 for (i = 0; i < 20; i++) { 77 printf("%s0x%.2x %s", 78 i % 16 == 0 ? "| " : "", 79 custdata[i], 80 i % 16 == 15 ? "|\n" : ""); 81 } 82 printf("\n"); 83 } 84 85 void 86 eeprom_v4k_modal_print(uint16_t *buf) 87 { 88 HAL_EEPROM_v4k *eep = (HAL_EEPROM_v4k *) buf; 89 MODAL_EEP4K_HEADER *mh = &eep->ee_base.modalHeader; 90 int i; 91 92 printf("| antCtrlCommon: 0x%.4x |\n", mh->antCtrlCommon); 93 printf("| switchSettling: 0x%.2x |\n", mh->switchSettling); 94 printf("| adcDesiredSize: %d |\n| pgaDesiredSize: %.2f dBm |\n", 95 mh->adcDesiredSize, (float) mh->pgaDesiredSize / 2.0); 96 97 printf("| antCtrlChain: 0:0x%.4x |\n", mh->antCtrlChain[0]); 98 printf("| antennaGainCh: 0:0x%.2x |\n", mh->antennaGainCh[0]); 99 printf("| txRxAttenCh: 0:0x%.2x |\n", mh->txRxAttenCh[0]); 100 printf("| rxTxMarginCh: 0:0x%.2x |\n", mh->rxTxMarginCh[0]); 101 printf("| noiseFloorThresCh: 0:0x%.2x |\n", mh->noiseFloorThreshCh[0]); 102 printf("| xlnaGainCh: 0:0x%.2x |\n", mh->xlnaGainCh[0]); 103 printf("| iqCalICh: 0:0x%.2x |\n", mh->iqCalICh[0]); 104 printf("| iqCalQCh: 0:0x%.2x |\n", mh->iqCalQCh[0]); 105 printf("| bswAtten: 0:0x%.2x |\n", mh->bswAtten[0]); 106 printf("| bswMargin: 0:0x%.2x |\n", mh->bswMargin[0]); 107 printf("| xatten2Db: 0:0x%.2x |\n", mh->xatten2Db[0]); 108 printf("| xatten2Margin: 0:0x%.2x |\n", mh->xatten2Margin[0]); 109 110 printf("| txEndToXpaOff: 0x%.2x | txEndToRxOn: 0x%.2x | txFrameToXpaOn: 0x%.2x |\n", 111 mh->txEndToXpaOff, mh->txEndToRxOn, mh->txFrameToXpaOn); 112 printf("| thres62: 0x%.2x\n", mh->thresh62); 113 printf("| xpdGain: 0x%.2x | xpd: 0x%.2x |\n", mh->xpdGain, mh->xpd); 114 115 printf("| pdGainOverlap: 0x%.2x xpaBiasLvl: 0x%.2x |\n", mh->pdGainOverlap, mh->xpaBiasLvl); 116 printf("| txFrameToDataStart: 0x%.2x | txFrameToPaOn: 0x%.2x |\n", mh->txFrameToDataStart, mh->txFrameToPaOn); 117 printf("| ht40PowerIncForPdadc: 0x%.2x |\n", mh->ht40PowerIncForPdadc); 118 printf("| swSettleHt40: 0x%.2x |\n", mh->swSettleHt40); 119 120 printf("| ob_0: 0x%.2x | ob_1: 0x%.2x | ob_2: 0x%.2x | ob_3: 0x%.2x |\n", 121 mh->ob_0, mh->ob_1, mh->ob_2, mh->ob_3); 122 printf("| db_1_0: 0x%.2x | db_1_1: 0x%.2x | db_1_2: 0x%.2x | db_1_3: 0x%.2x db_1_4: 0x%.2x|\n", 123 mh->db1_0, mh->db1_1, mh->db1_2, mh->db1_3, mh->db1_4); 124 printf("| db_1_0: 0x%.2x | db_1_1: 0x%.2x | db_1_2: 0x%.2x | db_1_3: 0x%.2x db_1_4: 0x%.2x|\n", 125 mh->db2_0, mh->db2_1, mh->db2_2, mh->db2_3, mh->db2_4); 126 127 printf("| antdiv_ctl1: 0x%.2x antdiv_ctl2: 0x%.2x |\n", mh->antdiv_ctl1, mh->antdiv_ctl2); 128 129 printf("| Modal Version: %.2x |\n", mh->version); 130 131 printf("| futureModal: 0x%.2x 0x%.2x 0x%.2x 0x%.2x |\n", 132 mh->futureModal[0], 133 mh->futureModal[1], 134 mh->futureModal[2], 135 mh->futureModal[3] 136 ); 137 138 /* and now, spur channels */ 139 for (i = 0; i < AR5416_EEPROM_MODAL_SPURS; i++) { 140 printf("| Spur %d: spurChan: 0x%.4x spurRangeLow: 0x%.2x spurRangeHigh: 0x%.2x |\n", 141 i, mh->spurChans[i].spurChan, 142 (int) mh->spurChans[i].spurRangeLow, 143 (int) mh->spurChans[i].spurRangeHigh); 144 } 145 } 146 147 static void 148 eeprom_v4k_print_caldata_perfreq(CAL_DATA_PER_FREQ_4K *f) 149 { 150 int i, j; 151 152 for (i = 0; i < AR5416_4K_NUM_PD_GAINS; i++) { 153 printf(" Gain %d: pwr dBm/vpd: ", i); 154 for (j = 0; j < AR5416_PD_GAIN_ICEPTS; j++) { 155 /* These are stored in 0.25dBm increments */ 156 /* XXX is this assumption correct for ar9285? */ 157 /* XXX shouldn't we care about the power table offset, if there is one? */ 158 printf("%d:(%.2f/%d) ", j, (float) f->pwrPdg[i][j] / 4.00, 159 f->vpdPdg[i][j]); 160 } 161 printf("\n"); 162 } 163 } 164 165 void 166 eeprom_v4k_calfreqpiers_print(uint16_t *buf) 167 { 168 HAL_EEPROM_v4k *eep = (HAL_EEPROM_v4k *) buf; 169 int i, n; 170 171 /* 2ghz cal piers */ 172 printf("calFreqPier2G: "); 173 for (i = 0; i < AR5416_4K_NUM_2G_CAL_PIERS; i++) { 174 printf(" 0x%.2x ", eep->ee_base.calFreqPier2G[i]); 175 } 176 printf("|\n"); 177 178 for (i = 0; i < AR5416_4K_NUM_2G_CAL_PIERS; i++) { 179 if (eep->ee_base.calFreqPier2G[i] == 0xff) 180 continue; 181 printf("2Ghz Cal Pier %d\n", i); 182 for (n = 0; n < AR5416_4K_MAX_CHAINS; n++) { 183 printf(" Chain %d:\n", n); 184 eeprom_v4k_print_caldata_perfreq(&eep->ee_base.calPierData2G[n][i]); 185 } 186 } 187 188 printf("\n"); 189 } 190 191 /* XXX these should just reference the v14 print routines */ 192 static void 193 eeprom_v14_target_legacy_print(CAL_TARGET_POWER_LEG *l) 194 { 195 int i; 196 if (l->bChannel == 0xff) 197 return; 198 printf(" bChannel: %d;", l->bChannel); 199 for (i = 0; i < 4; i++) { 200 printf(" %.2f", (float) l->tPow2x[i] / 2.0); 201 } 202 printf(" (dBm)\n"); 203 } 204 205 static void 206 eeprom_v14_target_ht_print(CAL_TARGET_POWER_HT *l) 207 { 208 int i; 209 if (l->bChannel == 0xff) 210 return; 211 printf(" bChannel: %d;", l->bChannel); 212 for (i = 0; i < 8; i++) { 213 printf(" %.2f", (float) l->tPow2x[i] / 2.0); 214 } 215 printf(" (dBm)\n"); 216 } 217 218 void 219 eeprom_v4k_print_targets(uint16_t *buf) 220 { 221 HAL_EEPROM_v4k *eep = (HAL_EEPROM_v4k *) buf; 222 int i; 223 224 /* 2ghz rates */ 225 printf("2Ghz CCK:\n"); 226 for (i = 0; i < AR5416_4K_NUM_2G_CCK_TARGET_POWERS; i++) { 227 eeprom_v14_target_legacy_print(&eep->ee_base.calTargetPowerCck[i]); 228 } 229 printf("2Ghz 11g:\n"); 230 for (i = 0; i < AR5416_4K_NUM_2G_20_TARGET_POWERS; i++) { 231 eeprom_v14_target_legacy_print(&eep->ee_base.calTargetPower2G[i]); 232 } 233 printf("2Ghz HT20:\n"); 234 for (i = 0; i < AR5416_4K_NUM_2G_20_TARGET_POWERS; i++) { 235 eeprom_v14_target_ht_print(&eep->ee_base.calTargetPower2GHT20[i]); 236 } 237 printf("2Ghz HT40:\n"); 238 for (i = 0; i < AR5416_4K_NUM_2G_40_TARGET_POWERS; i++) { 239 eeprom_v14_target_ht_print(&eep->ee_base.calTargetPower2GHT40[i]); 240 } 241 242 } 243 244 static void 245 eeprom_v4k_ctl_edge_print(CAL_CTL_DATA_4K *ctl) 246 { 247 int i, j; 248 uint8_t pow, flag; 249 250 for (i = 0; i < AR5416_4K_MAX_CHAINS; i++) { 251 printf(" chain %d: ", i); 252 for (j = 0; j < AR5416_4K_NUM_BAND_EDGES; j++) { 253 pow = ctl->ctlEdges[i][j].tPowerFlag & 0x3f; 254 flag = (ctl->ctlEdges[i][j].tPowerFlag & 0xc0) >> 6; 255 printf(" %d:pow=%d,flag=%.2x", j, pow, flag); 256 } 257 printf("\n"); 258 } 259 } 260 261 void 262 eeprom_v4k_ctl_print(uint16_t *buf) 263 { 264 HAL_EEPROM_v4k *eep = (HAL_EEPROM_v4k *) buf; 265 int i; 266 267 for (i = 0; i < AR5416_4K_NUM_CTLS; i++) { 268 if (eep->ee_base.ctlIndex[i] == 0) 269 continue; 270 printf("| ctlIndex: offset %d, value %d\n", i, eep->ee_base.ctlIndex[i]); 271 eeprom_v4k_ctl_edge_print(&eep->ee_base.ctlData[i]); 272 } 273 } 274 275 void 276 eeprom_v4k_print_edges(uint16_t *buf) 277 { 278 HAL_EEPROM_v4k *eep = (HAL_EEPROM_v4k *) buf; 279 int i; 280 281 printf("| eeNumCtls: %d\n", eep->ee_numCtls); 282 for (i = 0; i < NUM_EDGES*eep->ee_numCtls; i++) { 283 /* XXX is flag 8 or 32 bits? */ 284 printf("| edge %2d/%2d: rdEdge: %5d EdgePower: %.2f dBm Flag: 0x%.8x\n", 285 i / NUM_EDGES, i % NUM_EDGES, 286 eep->ee_rdEdgesPower[i].rdEdge, 287 (float) eep->ee_rdEdgesPower[i].twice_rdEdgePower / 2.0, 288 eep->ee_rdEdgesPower[i].flag); 289 290 if (i % NUM_EDGES == (NUM_EDGES -1)) 291 printf("|\n"); 292 } 293 } 294 295 void 296 eeprom_v4k_print_other(uint16_t *buf) 297 { 298 HAL_EEPROM_v4k *eep = (HAL_EEPROM_v4k *) buf; 299 printf("| ee_antennaGainMax: %.2x\n", eep->ee_antennaGainMax); 300 } 301