1# $FreeBSD$ 2 3#- 4# Copyright (c) 2014 M. Warner Losh <imp@FreeBSD.org> 5# Copyright (c) 2010 iXsystems, Inc. 6# 7# Redistribution and use in source and binary forms, with or without 8# modification, are permitted provided that the following conditions 9# are met: 10# 1. Redistributions of source code must retain the above copyright 11# notice, this list of conditions and the following disclaimer. 12# 2. Redistributions in binary form must reproduce the above copyright 13# notice, this list of conditions and the following disclaimer in the 14# documentation and/or other materials provided with the distribution. 15# 16# THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 17# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 18# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 19# ARE DISCLAIMED. IN NO EVENT SHALL iXsystems, Inc OR CONTRIBUTORS BE LIABLE 20# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 21# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 22# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 23# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 24# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 25# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 26# SUCH DAMAGE. 27# 28# 29# This file is heavily derived from both Sam Leffler's Avilia config, 30# as well as the BSDRP project's config file. Neither of these have 31# an explicit copyright/license statement, but are implicitly BSDL. This 32# example has been taken from the FreeNAS project (an early version) and 33# simplified to meet the needs of the example. 34# 35 36# NB: You want the other file 37 38NANO_PMAKE="make -j $(sysctl -n hw.ncpu)" 39 40NANO_CFG_BASE=$(pwd) 41NANO_CFG_BASE=${NANO_CFG_BASE%/dhcpd} 42NANO_SRC=$(pwd) 43NANO_SRC=${NANO_SRC%/tools/tools/nanobsd/dhcpd} 44NANO_OBJ=${NANO_SRC}/../nanobsd-builds/dhcpd/obj 45# Where cust_pkg() finds packages to install 46#XXX: Is this the right place? 47NANO_PORTS=$(realpath ${NANO_SRC}/../ports) 48#NANO_PORTS=/usr/ports 49NANO_PACKAGE_DIR=${NANO_SRC}/${NANO_TOOLS}/Pkg 50NANO_DATADIR=${NANO_OBJ}/_.data 51NANO_DATASIZE=40960 52NANO_INIT_IMG2=0 53unset MAKEOBJDIRPREFIX 54 55# this to go into nanobsd.sh 56NANO_PORTS=${NANO_PORTS:-/usr/ports} 57 58customize_cmd cust_allow_ssh_root 59 60add_etc_make_conf() 61{ 62 touch ${NANO_WORLDDIR}/etc/make.conf 63} 64customize_cmd add_etc_make_conf 65 66clean_usr_local() 67{ 68 LOCAL_DIR=${NANO_WORLDDIR}/usr/local 69 pprint 2 "Clean and create world directory (${LOCAL_DIR})" 70 if rm -rf ${LOCAL_DIR}/ > /dev/null 2>&1 ; then 71 true 72 else 73 chflags -R noschg ${LOCAL_DIR}/ 74 rm -rf ${LOCAL_DIR}/ 75 fi 76 for f in bin etc lib libdata libexec sbin share; do 77 mkdir -p ${LOCAL_DIR}/$f 78 done 79} 80customize_cmd clean_usr_local 81 82cust_install_machine_files() 83{ 84 echo "cd ${NANO_CFG_BASE}/Files" 85 cd ${NANO_CFG_BASE}/Files 86 find . -print | grep -Ev '/(CVS|\.git|\.hg|\.svn)' | cpio -dumpv ${NANO_WORLDDIR} 87} 88customize_cmd cust_install_files 89customize_cmd cust_install_machine_files 90 91buildenv() 92{ 93 cd ${NANO_SRC} 94 env __MAKE_CONF=${NANO_MAKE_CONF_BUILD} DESTDIR=${NANO_WORLDDIR} make buildenv 95} 96 97NANO_MAKEFS="makefs -B big \ 98 -o bsize=4096,fsize=512,density=8192,optimization=space" 99export NANO_MAKEFS 100 101# NB: leave c++ enabled so devd can be built 102CONF_BUILD=" 103WITHOUT_ACPI=true 104WITHOUT_ATM=true 105WITHOUT_AUDIT=true 106WITHOUT_BLUETOOTH=true 107WITHOUT_CALENDAR=true 108WITHOUT_DICT=true 109WITHOUT_EXAMPLES=true 110WITHOUT_GAMES=true 111WITHOUT_HTML=true 112WITHOUT_IPFILTER=true 113WITHOUT_LLVM_COV=true 114WITHOUT_LOCALES=true 115WITHOUT_LPR=true 116WITHOUT_MAN=true 117WITHOUT_NETCAT=true 118WITHOUT_NIS=true 119WITHOUT_NLS=true 120WITHOUT_NS_CACHING=true 121WITHOUT_PROFILE=true 122WITHOUT_SENDMAIL=true 123WITHOUT_SHAREDOCS=true 124WITHOUT_SYSCONS=true 125WITHOUT_LIB32=true 126" 127CONF_INSTALL="$CONF_BUILD 128INSTALL_NODEBUG=t 129NOPORTDOCS=t 130NO_INSTALL_MANPAGES=t 131" 132# The following would help... 133# WITHOUT_TOOLCHAIN=true can't build ports 134# WITHOUT_INSTALLLIB=true libgcc.a 135PKG_ONLY_MAKE_CONF=" 136WITHOUT_TOOLCHAIN=true 137WITHOUT_INSTALLLIB=true 138" 139 140NANO_PACKAGE_ONLY=1 141 142# install a package from a pre-built binary 143do_add_pkg () 144{ 145 # Need to create ${NANO_OBJ}/ports in this add_pkg_${port} function 146 set -x 147 mkdir -p ${NANO_OBJ}/ports/distfiles 148 mkdir -p ${NANO_OBJ}/ports/packages 149 mkdir -p ${NANO_WORLDDIR}/usr/ports/packages 150 mkdir -p ${NANO_WORLDDIR}/usr/ports/distfiles 151 mount -t nullfs -o noatime ${NANO_OBJ}/ports/packages \ 152 ${NANO_WORLDDIR}/usr/ports/packages 153 mount -t nullfs -o noatime ${NANO_OBJ}/ports/distfiles \ 154 ${NANO_WORLDDIR}/usr/ports/distfiles 155 CR env ASSUME_ALWAYS_YES=YES SIGNATURE_TYPE=none /usr/sbin/pkg add /usr/ports/packages/All/$1.txz 156 umount ${NANO_WORLDDIR}/usr/ports/distfiles 157 umount ${NANO_WORLDDIR}/usr/ports/packages 158 rmdir ${NANO_WORLDDIR}/usr/ports/packages 159 rmdir ${NANO_WORLDDIR}/usr/ports/distfiles 160 rmdir ${NANO_WORLDDIR}/usr/ports 161 set +x 162} 163 164# Build a port (with the side effect of creating a package) 165do_add_port () 166{ 167 local port_path 168 port_path=$1 169 shift 170 set -x 171 # Need to create ${NANO_OBJ}/ports in this add_port_${port} function 172 mkdir -p ${NANO_OBJ}/ports/distfiles 173 mkdir -p ${NANO_OBJ}/ports/packages 174 mkdir -p ${NANO_PORTS}/packages 175 mkdir -p ${NANO_PORTS}/distfiles 176 mkdir -p ${NANO_WORLDDIR}/usr/src 177 mkdir -p ${NANO_WORLDDIR}/usr/ports 178 mount -t nullfs -o noatime ${NANO_SRC} ${NANO_WORLDDIR}/usr/src 179 mount -t nullfs -o noatime ${NANO_PORTS} ${NANO_WORLDDIR}/usr/ports 180 mount -t nullfs -o noatime ${NANO_OBJ}/ports/packages \ 181 ${NANO_WORLDDIR}/usr/ports/packages 182 mount -t nullfs -o noatime ${NANO_OBJ}/ports/distfiles \ 183 ${NANO_WORLDDIR}/usr/ports/distfiles 184 mkdir -p ${NANO_WORLDDIR}/dev 185 mount -t devfs devfs ${NANO_WORLDDIR}/dev 186 mkdir -p ${NANO_WORLDDIR}/usr/workdir 187 cp /etc/resolv.conf ${NANO_WORLDDIR}/etc/resolv.conf 188 # OK, a little inefficient, but likely not enough to worry about. 189 CR ldconfig /lib /usr/lib /usr/local/lib 190 CR ldconfig -R 191 CR ldconfig -r 192# Improvement: Don't know why package-recursive don't works here 193 CR "env UNAME_p=${NANO_ARCH} TARGET=${NANO_ARCH} \ 194 TARGET_ARCH=${NANO_ARCH} PORTSDIR=${NANO_PORTS} make \ 195 __MAKE_CONF=${NANO_MAKE_CONF_BUILD} \ 196 WRKDIRPREFIX=/usr/workdir -C /usr/ports/$port_path \ 197 package-recursive BATCH=yes $* clean FORCE_PKG_REGISTER=t" 198 rm ${NANO_WORLDDIR}/etc/resolv.conf 199 rm -rf ${NANO_WORLDDIR}/usr/obj 200 rm -rf ${NANO_WORLDDIR}/usr/workdir 201 umount ${NANO_WORLDDIR}/dev 202 umount ${NANO_WORLDDIR}/usr/ports/packages 203 umount ${NANO_WORLDDIR}/usr/ports/distfiles 204 umount ${NANO_WORLDDIR}/usr/ports 205 umount ${NANO_WORLDDIR}/usr/src 206 set +x 207} 208 209# Need to check if this function works with cross-compiling architecture!!!! 210# Recursive complex fonction: Generate one function for each ports 211add_port () { 212 local port_path=$1 213 local port=`echo $1 | sed -e 's/\//_/'` 214 shift 215 # Check if package already exist 216 # Need to: 217 # 1. check ARCH of this package! 218 # 2. Add a trap 219 cd ${NANO_PORTS}/${port_path} 220 PKG_NAME=`env PORTSDIR=${NANO_PORTS} make __MAKE_CONF=${NANO_MAKE_CONF_BUILD} package-name` 221 if [ -f ${NANO_OBJ}/ports/packages/All/${PKG_NAME}.txz ]; then 222 # Pkg file found: Generate add_pkg_NAME function 223 eval " 224 add_pkg_${port} () { 225 do_add_pkg ${PKG_NAME} 226 } 227 customize_cmd add_pkg_${port} 228 " 229 else 230 # No pkg file: Generate add_port_NAME function 231 eval " 232 add_port_${port} () { 233 do_add_port ${port_path} $* 234 } 235 customize_cmd add_port_${port} 236 " 237 NANO_PACKAGE_ONLY=0 238 fi 239} 240 241die() 242{ 243 echo "$*" 244 exit 1 245} 246 247# Automatically include the packaging port here so it is always first so it 248# builds the port and adds the package so we can add other packages. 249add_port ports-mgmt/pkg 250 251rp=$(realpath ${NANO_OBJ}/) 252__a=`mount | grep ${rp} | awk '{print length($3), $3;}' | sort -rn | awk '{$1=""; print;}'` 253if [ -n "$__a" ]; then 254 echo "unmounting $__a" 255 umount $__a 256fi 257 258NANO_BOOTLOADER="boot/boot0" 259