xref: /freebsd/usr.bin/tip/libacu/t3000.c (revision aa0a1e58)
1 /*	$OpenBSD: t3000.c,v 1.14 2006/03/17 19:17:13 moritz Exp $	*/
2 /*	$NetBSD: t3000.c,v 1.5 1997/02/11 09:24:18 mrg Exp $	*/
3 
4 /*
5  * Copyright (c) 1992, 1993
6  *	The Regents of the University of California.  All rights reserved.
7  *
8  * Redistribution and use in source and binary forms, with or without
9  * modification, are permitted provided that the following conditions
10  * are met:
11  * 1. Redistributions of source code must retain the above copyright
12  *    notice, this list of conditions and the following disclaimer.
13  * 2. Redistributions in binary form must reproduce the above copyright
14  *    notice, this list of conditions and the following disclaimer in the
15  *    documentation and/or other materials provided with the distribution.
16  * 3. Neither the name of the University nor the names of its contributors
17  *    may be used to endorse or promote products derived from this software
18  *    without specific prior written permission.
19  *
20  * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
21  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
22  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
23  * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
24  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
25  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
26  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
27  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
28  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
29  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
30  * SUCH DAMAGE.
31  */
32 
33 #include <sys/cdefs.h>
34 __FBSDID("$FreeBSD$");
35 
36 #ifndef lint
37 #if 0
38 static char sccsid[] = "@(#)t3000.c	8.1 (Berkeley) 6/6/93";
39 static const char rcsid[] = "$OpenBSD: t3000.c,v 1.14 2006/03/17 19:17:13 moritz Exp $";
40 #endif
41 #endif /* not lint */
42 
43 /*
44  * Routines for calling up on a Telebit T3000 modem.
45  * Derived from Courier driver.
46  */
47 #include "tip.h"
48 
49 #include <sys/ioctl.h>
50 #include <stdio.h>
51 
52 #define	MAXRETRY	5
53 
54 static	int dialtimeout = 0;
55 static	int connected = 0;
56 static	jmp_buf timeoutbuf;
57 
58 static void	sigALRM(int);
59 static int	t3000_swallow(char *);
60 static int	t3000_connect(void);
61 static int	t3000_sync(void);
62 static void	t3000_write(int, char *, int);
63 static void	t3000_nap(void);
64 #ifdef DEBUG
65 static void	t3000_verbose_read(void);
66 #endif
67 
68 int
69 t3000_dialer(char *num, char *acu)
70 {
71 	char *cp;
72 	struct termios cntrl;
73 #ifdef ACULOG
74 	char line[80];
75 #endif
76 
77 	if (boolean(value(VERBOSE)))
78 		printf("Using \"%s\"\n", acu);
79 
80 	tcgetattr(FD, &cntrl);
81 	cntrl.c_cflag |= HUPCL;
82 	tcsetattr(FD, TCSANOW, &cntrl);
83 	/*
84 	 * Get in synch.
85 	 */
86 	if (!t3000_sync()) {
87 badsynch:
88 		printf("can't synchronize with t3000\n");
89 #ifdef ACULOG
90 		logent(value(HOST), num, "t3000", "can't synch up");
91 #endif
92 		return (0);
93 	}
94 	t3000_write(FD, "AT E0\r", 6);	/* turn off echoing */
95 	sleep(1);
96 #ifdef DEBUG
97 	if (boolean(value(VERBOSE)))
98 		t3000_verbose_read();
99 #endif
100 	tcflush(FD, TCIOFLUSH);
101 	t3000_write(FD, "AT E0 H0 Q0 X4 V1\r", 18);
102 	if (!t3000_swallow("\r\nOK\r\n"))
103 		goto badsynch;
104 	fflush(stdout);
105 	t3000_write(FD, "AT D", 4);
106 	for (cp = num; *cp; cp++)
107 		if (*cp == '=')
108 			*cp = ',';
109 	t3000_write(FD, num, strlen(num));
110 	t3000_write(FD, "\r", 1);
111 	connected = t3000_connect();
112 #ifdef ACULOG
113 	if (dialtimeout) {
114 		(void)snprintf(line, sizeof line, "%ld second dial timeout",
115 			number(value(DIALTIMEOUT)));
116 		logent(value(HOST), num, "t3000", line);
117 	}
118 #endif
119 	if (dialtimeout)
120 		t3000_disconnect();
121 	return (connected);
122 }
123 
124 void
125 t3000_disconnect(void)
126 {
127 	 /* first hang up the modem*/
128 	ioctl(FD, TIOCCDTR, 0);
129 	sleep(1);
130 	ioctl(FD, TIOCSDTR, 0);
131 	t3000_sync();				/* reset */
132 	close(FD);
133 }
134 
135 void
136 t3000_abort(void)
137 {
138 	t3000_write(FD, "\r", 1);	/* send anything to abort the call */
139 	t3000_disconnect();
140 }
141 
142 /*ARGSUSED*/
143 static void
144 sigALRM(int signo)
145 {
146 	printf("\07timeout waiting for reply\n");
147 	dialtimeout = 1;
148 	longjmp(timeoutbuf, 1);
149 }
150 
151 static int
152 t3000_swallow(char *match)
153 {
154 	sig_t f;
155 	char c;
156 
157 	f = signal(SIGALRM, sigALRM);
158 	dialtimeout = 0;
159 	do {
160 		if (*match =='\0') {
161 			signal(SIGALRM, f);
162 			return (1);
163 		}
164 		if (setjmp(timeoutbuf)) {
165 			signal(SIGALRM, f);
166 			return (0);
167 		}
168 		alarm(number(value(DIALTIMEOUT)));
169 		read(FD, &c, 1);
170 		alarm(0);
171 		c &= 0177;
172 #ifdef DEBUG
173 		if (boolean(value(VERBOSE)))
174 			putchar(c);
175 #endif
176 	} while (c == *match++);
177 #ifdef DEBUG
178 	if (boolean(value(VERBOSE)))
179 		fflush(stdout);
180 #endif
181 	signal(SIGALRM, SIG_DFL);
182 	return (0);
183 }
184 
185 #ifndef B19200		/* XXX */
186 #define	B19200	EXTA
187 #define	B38400	EXTB
188 #endif
189 
190 struct tbaud_msg {
191 	char *msg;
192 	int baud;
193 	int baud2;
194 } tbaud_msg[] = {
195 	{ "",		B300,	0 },
196 	{ " 1200",	B1200,	0 },
197 	{ " 2400",	B2400,	0 },
198 	{ " 4800",	B4800,	0 },
199 	{ " 9600",	B9600,	0 },
200 	{ " 14400",	B19200,	B9600 },
201 	{ " 19200",	B19200,	B9600 },
202 	{ " 38400",	B38400,	B9600 },
203 	{ " 57600",	B38400,	B9600 },
204 	{ " 7512",	B9600,	0 },
205 	{ " 1275",	B2400,	0 },
206 	{ " 7200",	B9600,	0 },
207 	{ " 12000",	B19200,	B9600 },
208 	{ 0,		0,	0 },
209 };
210 
211 static int
212 t3000_connect(void)
213 {
214 	char c;
215 	int nc, nl, n;
216 	char dialer_buf[64];
217 	struct tbaud_msg *bm;
218 	sig_t f;
219 
220 	if (t3000_swallow("\r\n") == 0)
221 		return (0);
222 	f = signal(SIGALRM, sigALRM);
223 again:
224 	nc = 0; nl = sizeof(dialer_buf)-1;
225 	bzero(dialer_buf, sizeof(dialer_buf));
226 	dialtimeout = 0;
227 	for (nc = 0, nl = sizeof(dialer_buf)-1 ; nl > 0 ; nc++, nl--) {
228 		if (setjmp(timeoutbuf))
229 			break;
230 		alarm(number(value(DIALTIMEOUT)));
231 		n = read(FD, &c, 1);
232 		alarm(0);
233 		if (n <= 0)
234 			break;
235 		c &= 0x7f;
236 		if (c == '\r') {
237 			if (t3000_swallow("\n") == 0)
238 				break;
239 			if (!dialer_buf[0])
240 				goto again;
241 			if (strcmp(dialer_buf, "RINGING") == 0 &&
242 			    boolean(value(VERBOSE))) {
243 #ifdef DEBUG
244 				printf("%s\r\n", dialer_buf);
245 #endif
246 				goto again;
247 			}
248 			if (strncmp(dialer_buf, "CONNECT",
249 				    sizeof("CONNECT")-1) != 0)
250 				break;
251 			for (bm = tbaud_msg ; bm->msg ; bm++)
252 				if (strcmp(bm->msg,
253 				    dialer_buf+sizeof("CONNECT")-1) == 0) {
254 					struct termios	cntrl;
255 
256 					tcgetattr(FD, &cntrl);
257 					cfsetospeed(&cntrl, bm->baud);
258 					cfsetispeed(&cntrl, bm->baud);
259 					tcsetattr(FD, TCSAFLUSH, &cntrl);
260 					signal(SIGALRM, f);
261 #ifdef DEBUG
262 					if (boolean(value(VERBOSE)))
263 						printf("%s\r\n", dialer_buf);
264 #endif
265 					return (1);
266 				}
267 			break;
268 		}
269 		dialer_buf[nc] = c;
270 #ifdef notdef
271 		if (boolean(value(VERBOSE)))
272 			putchar(c);
273 #endif
274 	}
275 	printf("%s\r\n", dialer_buf);
276 	signal(SIGALRM, f);
277 	return (0);
278 }
279 
280 /*
281  * This convoluted piece of code attempts to get
282  * the t3000 in sync.
283  */
284 static int
285 t3000_sync(void)
286 {
287 	int already = 0;
288 	int len;
289 	char buf[40];
290 
291 	while (already++ < MAXRETRY) {
292 		tcflush(FD, TCIOFLUSH);
293 		t3000_write(FD, "\rAT Z\r", 6);	/* reset modem */
294 		bzero(buf, sizeof(buf));
295 		sleep(2);
296 		ioctl(FD, FIONREAD, &len);
297 #if 1
298 if (len == 0) len = 1;
299 #endif
300 		if (len) {
301 			len = read(FD, buf, sizeof(buf));
302 #ifdef DEBUG
303 			buf[len] = '\0';
304 			printf("t3000_sync: (\"%s\")\n\r", buf);
305 #endif
306 			if (strchr(buf, '0') ||
307 		   	   (strchr(buf, 'O') && strchr(buf, 'K')))
308 				return(1);
309 		}
310 		/*
311 		 * If not strapped for DTR control,
312 		 * try to get command mode.
313 		 */
314 		sleep(1);
315 		t3000_write(FD, "+++", 3);
316 		sleep(1);
317 		/*
318 		 * Toggle DTR to force anyone off that might have left
319 		 * the modem connected.
320 		 */
321 		ioctl(FD, TIOCCDTR, 0);
322 		sleep(1);
323 		ioctl(FD, TIOCSDTR, 0);
324 	}
325 	t3000_write(FD, "\rAT Z\r", 6);
326 	return (0);
327 }
328 
329 static void
330 t3000_write(int fd, char *cp, int n)
331 {
332 #ifdef notdef
333 	if (boolean(value(VERBOSE)))
334 		write(1, cp, n);
335 #endif
336 	tcdrain(fd);
337 	t3000_nap();
338 	for ( ; n-- ; cp++) {
339 		write(fd, cp, 1);
340 		tcdrain(fd);
341 		t3000_nap();
342 	}
343 }
344 
345 #ifdef DEBUG
346 static void
347 t3000_verbose_read(void)
348 {
349 	int n = 0;
350 	char buf[BUFSIZ];
351 
352 	if (ioctl(FD, FIONREAD, &n) < 0)
353 		return;
354 	if (n <= 0)
355 		return;
356 	if (read(FD, buf, n) != n)
357 		return;
358 	write(1, buf, n);
359 }
360 #endif
361 
362 /* Give the t3000 50 milliseconds between characters */
363 static void
364 t3000_nap(void)
365 {
366 	struct timespec ts;
367 
368 	ts.tv_sec = 0;
369 	ts.tv_nsec = 50 * 1000000;
370 
371 	nanosleep(&ts, NULL);
372 }
373