xref: /freebsd/usr.bin/tip/tip/remote (revision bdcbfde3)

# remote -- remote host description file
# see tip(1), remote(5)
#
# at	ACU type
# br	bit rate (defaults to 9600)
# cu	call unit (default is dv)
# du	make a call flag (dial up)
# dv	device to use for the tty
# el	EOL marks (default is NULL)
# fs	frame size (default is BUFSIZ) -- used in buffering writes on
#	receive operations
# ie	input EOF marks (default is NULL)
# oe	output EOF string (default is NULL)
# pa	The parity type to use: even, odd, none, zero, one (default even)
# pn	phone numbers (@ =>'s search phones file; possibly taken from
#	PHONES environment variable)
# tc	to continue a capability

# Example systems
unixshell|Unix Access:\
	:pn=\@:tc=unix57600:
dosbbs|DOS-based BBS:\
	:pn=\@:tc=dos57600:

# UNIX system definitions
unix57600|57600 Baud dial-out to a UNIX system:\
	:el=^U^C^R^O^D^S^Q:ie=%$:oe=^D:tc=dial57600:
unix33600|33600 Baud dial-out to a UNIX system:\
	:el=^U^C^R^O^D^S^Q:ie=%$:oe=^D:tc=dial33600:

# DOS system definitions
dos57600|57600 Baud dial-out to a DOS system:\
	:el=^U^C^R^O^D^S^Q:ie=%$:oe=^Z:pa=none:tc=dial57600:

# 33.6k and 56k modems run the com port at 115200 bps to allow for the
# compression performed in the modem.  Note that some serial hardware
# does not support speeds above 38400 bps and that speeds above that have
# never been formally standardized.  Modern architectures with 16550 or
# better UARTs typically have no issues with the higher speeds.
dial57600|57600 Baud Hayes attributes:\
	br#115200:tc=dial:
dial33600|33600 Baud Hayes attributes:\
	br#115200:tc=dial:
# 14.4k and 28.8k modems ran the port at 4x.  Some rare 19.2 baud modems
# did too, but those aren't included in this example.
dial28800|28800 Baud Hayes attributes:\
	br#115200:tc=dial:
dial14400|14400 Baud Hayes attributes:\
	br#57600:tc=dial:
dial|Generic dialing parameters:\
	:dv=/dev/cuau0:cu=/dev/cuau0:at=hayes:du:pa=none:

# Hardwired line
cuau0c|cua0c:dv=/dev/cuau0:br#9600:pa=none:

# Finger friendly shortcuts
uart0|com1:dv=/dev/cuau0:br#9600:pa=none:
uart1|com2:dv=/dev/cuau1:br#9600:pa=none:
uart2|com3:dv=/dev/cuau2:br#9600:pa=none:
uart3|com4:dv=/dev/cuau3:br#9600:pa=none:
uart4|com5:dv=/dev/cuau4:br#9600:pa=none:
uart5|com6:dv=/dev/cuau5:br#9600:pa=none:
uart6|com7:dv=/dev/cuau6:br#9600:pa=none:
uart7|com8:dv=/dev/cuau7:br#9600:pa=none:
ucom1:dv=/dev/cuaU0:br#9600:pa=none:
ucom2:dv=/dev/cuaU1:br#9600:pa=none:
ucom3:dv=/dev/cuaU2:br#9600:pa=none:
ucom4:dv=/dev/cuaU3:br#9600:pa=none:
ucom5:dv=/dev/cuaU4:br#9600:pa=none:
ucom6:dv=/dev/cuaU5:br#9600:pa=none:
ucom7:dv=/dev/cuaU6:br#9600:pa=none:
ucom8:dv=/dev/cuaU7:br#9600:pa=none: