xref: /freebsd/usr.sbin/acpi/acpiconf/acpiconf.c (revision f56f82e0)
1 /*-
2  * Copyright (c) 1999 Mitsuru IWASAKI <iwasaki@FreeBSD.org>
3  * All rights reserved.
4  *
5  * Redistribution and use in source and binary forms, with or without
6  * modification, are permitted provided that the following conditions
7  * are met:
8  * 1. Redistributions of source code must retain the above copyright
9  *    notice, this list of conditions and the following disclaimer.
10  * 2. Redistributions in binary form must reproduce the above copyright
11  *    notice, this list of conditions and the following disclaimer in the
12  *    documentation and/or other materials provided with the distribution.
13  *
14  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
15  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
16  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
17  * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
18  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
19  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
20  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
21  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
22  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
23  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
24  * SUCH DAMAGE.
25  *
26  *	$Id: acpiconf.c,v 1.5 2000/08/08 14:12:19 iwasaki Exp $
27  *	$FreeBSD$
28  */
29 
30 #include <sys/param.h>
31 
32 #include <err.h>
33 #include <fcntl.h>
34 #include <stdio.h>
35 #include <sys/ioctl.h>
36 #include <sysexits.h>
37 #include <unistd.h>
38 
39 #include <dev/acpica/acpiio.h>
40 
41 #include <contrib/dev/acpica/include/acpi.h>
42 
43 #define ACPIDEV		"/dev/acpi"
44 
45 static int	acpifd;
46 
47 static void
48 acpi_init(void)
49 {
50 	acpifd = open(ACPIDEV, O_RDWR);
51 	if (acpifd == -1)
52 		acpifd = open(ACPIDEV, O_RDONLY);
53 	if (acpifd == -1)
54 		err(EX_OSFILE, ACPIDEV);
55 }
56 
57 /* Prepare to sleep and then wait for the signal that sleeping can occur. */
58 static void
59 acpi_sleep(int sleep_type)
60 {
61 	int ret;
62 
63 	/* Notify OS that we want to sleep.  devd(8) gets this notify. */
64 	ret = ioctl(acpifd, ACPIIO_REQSLPSTATE, &sleep_type);
65 	if (ret != 0)
66 		err(EX_IOERR, "request sleep type (%d) failed", sleep_type);
67 }
68 
69 /* Ack or abort a pending suspend request. */
70 static void
71 acpi_sleep_ack(int err_val)
72 {
73 	int ret;
74 
75 	ret = ioctl(acpifd, ACPIIO_ACKSLPSTATE, &err_val);
76 	if (ret != 0)
77 		err(EX_IOERR, "ack sleep type failed");
78 }
79 
80 /* should be a acpi define, but doesn't appear to be */
81 #define UNKNOWN_CAP 0xffffffff
82 #define UNKNOWN_VOLTAGE 0xffffffff
83 
84 static int
85 acpi_battinfo(int num)
86 {
87 	union acpi_battery_ioctl_arg battio;
88 	const char *pwr_units;
89 	int hours, min, amp;
90 	uint32_t volt;
91 
92 	if (num < 0 || num > 64)
93 		err(EX_USAGE, "invalid battery %d", num);
94 
95 	/* Print battery design information. */
96 	battio.unit = num;
97 	if (ioctl(acpifd, ACPIIO_BATT_GET_BIF, &battio) == -1)
98 		err(EX_IOERR, "get battery info (%d) failed", num);
99 	amp = battio.bif.units;
100 	pwr_units = amp ? "mA" : "mW";
101 	if (battio.bif.dcap == UNKNOWN_CAP)
102 		printf("Design capacity:\tunknown\n");
103 	else
104 		printf("Design capacity:\t%d %sh\n", battio.bif.dcap,
105 		    pwr_units);
106 	if (battio.bif.lfcap == UNKNOWN_CAP)
107 		printf("Last full capacity:\tunknown\n");
108 	else
109 		printf("Last full capacity:\t%d %sh\n", battio.bif.lfcap,
110 		    pwr_units);
111 	printf("Technology:\t\t%s\n", battio.bif.btech == 0 ?
112 	    "primary (non-rechargeable)" : "secondary (rechargeable)");
113 	if (battio.bif.dvol == UNKNOWN_CAP)
114 		printf("Design voltage:\t\tunknown\n");
115 	else
116 		printf("Design voltage:\t\t%d mV\n", battio.bif.dvol);
117 	printf("Capacity (warn):\t%d %sh\n", battio.bif.wcap, pwr_units);
118 	printf("Capacity (low):\t\t%d %sh\n", battio.bif.lcap, pwr_units);
119 	printf("Low/warn granularity:\t%d %sh\n", battio.bif.gra1, pwr_units);
120 	printf("Warn/full granularity:\t%d %sh\n", battio.bif.gra2, pwr_units);
121 	printf("Model number:\t\t%s\n", battio.bif.model);
122 	printf("Serial number:\t\t%s\n", battio.bif.serial);
123 	printf("Type:\t\t\t%s\n", battio.bif.type);
124 	printf("OEM info:\t\t%s\n", battio.bif.oeminfo);
125 
126 	/* Fetch battery voltage information. */
127 	volt = UNKNOWN_VOLTAGE;
128 	battio.unit = num;
129 	if (ioctl(acpifd, ACPIIO_BATT_GET_BST, &battio) == -1)
130 		err(EX_IOERR, "get battery status (%d) failed", num);
131 	if (battio.bst.state != ACPI_BATT_STAT_NOT_PRESENT)
132 		volt = battio.bst.volt;
133 
134 	/* Print current battery state information. */
135 	battio.unit = num;
136 	if (ioctl(acpifd, ACPIIO_BATT_GET_BATTINFO, &battio) == -1)
137 		err(EX_IOERR, "get battery user info (%d) failed", num);
138 	if (battio.battinfo.state != ACPI_BATT_STAT_NOT_PRESENT) {
139 		const char *state;
140 		switch (battio.battinfo.state & ACPI_BATT_STAT_BST_MASK) {
141 		case 0:
142 			state = "high";
143 			break;
144 		case ACPI_BATT_STAT_DISCHARG:
145 			state = "discharging";
146 			break;
147 		case ACPI_BATT_STAT_CHARGING:
148 			state = "charging";
149 			break;
150 		case ACPI_BATT_STAT_CRITICAL:
151 			state = "critical";
152 			break;
153 		case ACPI_BATT_STAT_DISCHARG | ACPI_BATT_STAT_CRITICAL:
154 			state = "critical discharging";
155 			break;
156 		case ACPI_BATT_STAT_CHARGING | ACPI_BATT_STAT_CRITICAL:
157 			state = "critical charging";
158 			break;
159 		default:
160 			state = "invalid";
161 		}
162 		printf("State:\t\t\t%s\n", state);
163 		if (battio.battinfo.cap == -1)
164 			printf("Remaining capacity:\tunknown\n");
165 		else
166 			printf("Remaining capacity:\t%d%%\n",
167 			    battio.battinfo.cap);
168 		if (battio.battinfo.min == -1)
169 			printf("Remaining time:\t\tunknown\n");
170 		else {
171 			hours = battio.battinfo.min / 60;
172 			min = battio.battinfo.min % 60;
173 			printf("Remaining time:\t\t%d:%02d\n", hours, min);
174 		}
175 		if (battio.battinfo.rate == -1)
176 			printf("Present rate:\t\tunknown\n");
177 		else if (amp && volt != UNKNOWN_VOLTAGE) {
178 			printf("Present rate:\t\t%d mA (%d mW)\n",
179 			    battio.battinfo.rate,
180 			    battio.battinfo.rate * volt / 1000);
181 		} else
182 			printf("Present rate:\t\t%d %s\n",
183 			    battio.battinfo.rate, pwr_units);
184 	} else
185 		printf("State:\t\t\tnot present\n");
186 
187 	/* Print battery voltage information. */
188 	if (volt == UNKNOWN_VOLTAGE)
189 		printf("Present voltage:\tunknown\n");
190 	else
191 		printf("Present voltage:\t%d mV\n", volt);
192 
193 	return (0);
194 }
195 
196 static void
197 usage(const char* prog)
198 {
199 	printf("usage: %s [-h] [-i batt] [-k ack] [-s 1-4]\n", prog);
200 	exit(0);
201 }
202 
203 int
204 main(int argc, char *argv[])
205 {
206 	char	*prog;
207 	int	c, sleep_type;
208 
209 	prog = argv[0];
210 	if (argc < 2)
211 		usage(prog);
212 		/* NOTREACHED */
213 
214 	sleep_type = -1;
215 	acpi_init();
216 	while ((c = getopt(argc, argv, "hi:k:s:")) != -1) {
217 		switch (c) {
218 		case 'i':
219 			acpi_battinfo(atoi(optarg));
220 			break;
221 		case 'k':
222 			acpi_sleep_ack(atoi(optarg));
223 			break;
224 		case 's':
225 			if (optarg[0] == 'S')
226 				sleep_type = optarg[1] - '0';
227 			else
228 				sleep_type = optarg[0] - '0';
229 			if (sleep_type < 1 || sleep_type > 4)
230 				errx(EX_USAGE, "invalid sleep type (%d)",
231 				     sleep_type);
232 			break;
233 		case 'h':
234 		default:
235 			usage(prog);
236 			/* NOTREACHED */
237 		}
238 	}
239 	argc -= optind;
240 	argv += optind;
241 
242 	if (sleep_type != -1)
243 		acpi_sleep(sleep_type);
244 
245 	close(acpifd);
246 	exit (0);
247 }
248