1 /*- 2 * Copyright (c) 2007 The DragonFly Project. All rights reserved. 3 * 4 * This code is derived from software contributed to The DragonFly Project 5 * by Matthew Dillon <dillon@backplane.com> 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 11 * 1. Redistributions of source code must retain the above copyright 12 * notice, this list of conditions and the following disclaimer. 13 * 2. Redistributions in binary form must reproduce the above copyright 14 * notice, this list of conditions and the following disclaimer in 15 * the documentation and/or other materials provided with the 16 * distribution. 17 * 3. Neither the name of The DragonFly Project nor the names of its 18 * contributors may be used to endorse or promote products derived 19 * from this software without specific, prior written permission. 20 * 21 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 22 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 23 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS 24 * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE 25 * COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, 26 * INCIDENTAL, SPECIAL, EXEMPLARY OR CONSEQUENTIAL DAMAGES (INCLUDING, 27 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 28 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED 29 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, 30 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT 31 * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 32 * SUCH DAMAGE. 33 * 34 * $DragonFly: src/sys/vfs/hammer/hammer_disk.h,v 1.55 2008/11/13 02:18:43 dillon Exp $ 35 * $FreeBSD$ 36 */ 37 38 #ifndef VFS_HAMMER_DISK_H_ 39 #define VFS_HAMMER_DISK_H_ 40 41 #include <sys/endian.h> 42 43 #ifndef _SYS_UUID_H_ 44 #include <sys/uuid.h> 45 #endif 46 47 /* 48 * The structures below represent the on-disk format for a HAMMER 49 * filesystem. Note that all fields for on-disk structures are naturally 50 * aligned. HAMMER uses little endian for fields in on-disk structures. 51 * HAMMER doesn't support big endian arch, but is planned. 52 * 53 * Most of HAMMER revolves around the concept of an object identifier. An 54 * obj_id is a 64 bit quantity which uniquely identifies a filesystem object 55 * FOR THE ENTIRE LIFE OF THE FILESYSTEM. This uniqueness allows backups 56 * and mirrors to retain varying amounts of filesystem history by removing 57 * any possibility of conflict through identifier reuse. 58 * 59 * A HAMMER filesystem may span multiple volumes. 60 * 61 * A HAMMER filesystem uses a 16K filesystem buffer size. All filesystem 62 * I/O is done in multiples of 16K. 63 * 64 * 64K X-bufs are used for blocks >= a file's 1MB mark. 65 * 66 * Per-volume storage limit: 52 bits 4096 TB 67 * Per-Zone storage limit: 60 bits 1 MTB 68 * Per-filesystem storage limit: 60 bits 1 MTB 69 */ 70 #define HAMMER_BUFSIZE 16384 71 #define HAMMER_XBUFSIZE 65536 72 #define HAMMER_HBUFSIZE (HAMMER_BUFSIZE / 2) 73 #define HAMMER_XDEMARC (1024 * 1024) 74 #define HAMMER_BUFMASK (HAMMER_BUFSIZE - 1) 75 #define HAMMER_XBUFMASK (HAMMER_XBUFSIZE - 1) 76 77 #define HAMMER_BUFSIZE64 ((uint64_t)HAMMER_BUFSIZE) 78 #define HAMMER_BUFMASK64 ((uint64_t)HAMMER_BUFMASK) 79 80 #define HAMMER_XBUFSIZE64 ((uint64_t)HAMMER_XBUFSIZE) 81 #define HAMMER_XBUFMASK64 ((uint64_t)HAMMER_XBUFMASK) 82 83 #define HAMMER_OFF_ZONE_MASK 0xF000000000000000ULL /* zone portion */ 84 #define HAMMER_OFF_VOL_MASK 0x0FF0000000000000ULL /* volume portion */ 85 #define HAMMER_OFF_SHORT_MASK 0x000FFFFFFFFFFFFFULL /* offset portion */ 86 #define HAMMER_OFF_LONG_MASK 0x0FFFFFFFFFFFFFFFULL /* offset portion */ 87 88 #define HAMMER_OFF_BAD ((hammer_off_t)-1) 89 90 #define HAMMER_BUFSIZE_DOALIGN(offset) \ 91 (((offset) + HAMMER_BUFMASK) & ~HAMMER_BUFMASK) 92 #define HAMMER_BUFSIZE64_DOALIGN(offset) \ 93 (((offset) + HAMMER_BUFMASK64) & ~HAMMER_BUFMASK64) 94 95 #define HAMMER_XBUFSIZE_DOALIGN(offset) \ 96 (((offset) + HAMMER_XBUFMASK) & ~HAMMER_XBUFMASK) 97 #define HAMMER_XBUFSIZE64_DOALIGN(offset) \ 98 (((offset) + HAMMER_XBUFMASK64) & ~HAMMER_XBUFMASK64) 99 100 /* 101 * The current limit of volumes that can make up a HAMMER FS 102 */ 103 #define HAMMER_MAX_VOLUMES 256 104 105 /* 106 * Reserved space for (future) header junk after the volume header. 107 */ 108 #define HAMMER_MIN_VOL_JUNK (HAMMER_BUFSIZE * 16) /* 256 KB */ 109 #define HAMMER_MAX_VOL_JUNK HAMMER_MIN_VOL_JUNK 110 #define HAMMER_VOL_JUNK_SIZE HAMMER_MIN_VOL_JUNK 111 112 /* 113 * Hammer transaction ids are 64 bit unsigned integers and are usually 114 * synchronized with the time of day in nanoseconds. 115 * 116 * Hammer offsets are used for FIFO indexing and embed a cycle counter 117 * and volume number in addition to the offset. Most offsets are required 118 * to be 16 KB aligned. 119 */ 120 typedef uint64_t hammer_tid_t; 121 typedef uint64_t hammer_off_t; 122 typedef uint32_t hammer_crc_t; 123 typedef uuid_t hammer_uuid_t; 124 125 #define HAMMER_MIN_TID 0ULL /* unsigned */ 126 #define HAMMER_MAX_TID 0xFFFFFFFFFFFFFFFFULL /* unsigned */ 127 #define HAMMER_MIN_KEY -0x8000000000000000LL /* signed */ 128 #define HAMMER_MAX_KEY 0x7FFFFFFFFFFFFFFFLL /* signed */ 129 #define HAMMER_MIN_OBJID HAMMER_MIN_KEY /* signed */ 130 #define HAMMER_MAX_OBJID HAMMER_MAX_KEY /* signed */ 131 #define HAMMER_MIN_RECTYPE 0x0U /* unsigned */ 132 #define HAMMER_MAX_RECTYPE 0xFFFFU /* unsigned */ 133 #define HAMMER_MIN_OFFSET 0ULL /* unsigned */ 134 #define HAMMER_MAX_OFFSET 0xFFFFFFFFFFFFFFFFULL /* unsigned */ 135 136 /* 137 * hammer_off_t has several different encodings. Note that not all zones 138 * encode a vol_no. Zone bits are not a part of filesystem capacity as 139 * the zone bits aren't directly or indirectly mapped to physical volumes. 140 * 141 * In other words, HAMMER's logical filesystem offset consists of 64 bits, 142 * but the filesystem is considered 60 bits filesystem, not 64 bits. 143 * The maximum filesystem capacity is 1EB, not 16EB. 144 * 145 * zone 0: available, a big-block that contains the offset is unused 146 * zone 1 (z,v,o): raw volume relative (offset 0 is the volume header) 147 * zone 2 (z,v,o): raw buffer relative (offset 0 is the first buffer) 148 * zone 3 (z,o): undo/redo fifo - fixed zone-2 offset array in volume header 149 * zone 4 (z,v,o): freemap - only real blockmap 150 * zone 8 (z,v,o): B-Tree - actually zone-2 address 151 * zone 9 (z,v,o): meta - actually zone-2 address 152 * zone 10 (z,v,o): large-data - actually zone-2 address 153 * zone 11 (z,v,o): small-data - actually zone-2 address 154 * zone 15: unavailable, usually the offset is beyond volume size 155 * 156 * layer1/layer2 direct map: 157 * Maximum HAMMER filesystem capacity from volume aspect 158 * 2^8(max volumes) * 2^52(max volume size) = 2^60 = 1EB (long offset) 159 * <-------------------------------------------------------------> 160 * 8bits 52bits (short offset) 161 * <------><-----------------------------------------------------> 162 * zzzzvvvvvvvvoooo oooooooooooooooo oooooooooooooooo oooooooooooooooo 163 * ----111111111111 1111112222222222 222222222ooooooo oooooooooooooooo 164 * <-----------------><------------------><----------------------> 165 * 18bits 19bits 23bits 166 * <-------------------------------------------------------------> 167 * 2^18(layer1) * 2^19(layer2) * 2^23(big-block) = 2^60 = 1EB 168 * Maximum HAMMER filesystem capacity from blockmap aspect 169 * 170 * volume#0 layout 171 * +-------------------------> offset 0 of a device/partition 172 * | volume header (1928 bytes) 173 * | the rest of header junk space (HAMMER_BUFSIZE aligned) 174 * +-------------------------> vol_bot_beg 175 * | boot area (HAMMER_BUFSIZE aligned) 176 * +-------------------------> vol_mem_beg 177 * | memory log (HAMMER_BUFSIZE aligned) 178 * +-------------------------> vol_buf_beg (physical offset of zone-2) 179 * | zone-4 big-block for layer1 180 * +-------------------------> vol_buf_beg + HAMMER_BIGBLOCK_SIZE 181 * | zone-4 big-blocks for layer2 182 * | ... (1 big-block per 4TB space) 183 * +-------------------------> vol_buf_beg + HAMMER_BIGBLOCK_SIZE * ... 184 * | zone-3 big-blocks for UNDO/REDO FIFO 185 * | ... (max 128 big-blocks) 186 * +-------------------------> vol_buf_beg + HAMMER_BIGBLOCK_SIZE * ... 187 * | zone-8 big-block for root B-Tree node/etc 188 * +-------------------------> vol_buf_beg + HAMMER_BIGBLOCK_SIZE * ... 189 * | zone-9 big-block for root inode/PFS/etc 190 * +-------------------------> vol_buf_beg + HAMMER_BIGBLOCK_SIZE * ... 191 * | zone-X big-blocks 192 * | ... (big-blocks for new zones after newfs_hammer) 193 * | ... 194 * | ... 195 * | ... 196 * | ... 197 * +-------------------------> vol_buf_end (HAMMER_BUFSIZE aligned) 198 * +-------------------------> end of a device/partition 199 * 200 * volume#N layout (0<N<256) 201 * +-------------------------> offset 0 of a device/partition 202 * | volume header (1928 bytes) 203 * | the rest of header junk space (HAMMER_BUFSIZE aligned) 204 * +-------------------------> vol_bot_beg 205 * | boot area (HAMMER_BUFSIZE aligned) 206 * +-------------------------> vol_mem_beg 207 * | memory log (HAMMER_BUFSIZE aligned) 208 * +-------------------------> vol_buf_beg (physical offset of zone-2) 209 * | zone-4 big-blocks for layer2 210 * | ... (1 big-block per 4TB space) 211 * +-------------------------> vol_buf_beg + HAMMER_BIGBLOCK_SIZE * ... 212 * | zone-X big-blocks 213 * | ... (unused until volume#(N-1) runs out of space) 214 * | ... 215 * | ... 216 * | ... 217 * | ... 218 * +-------------------------> vol_buf_end (HAMMER_BUFSIZE aligned) 219 * +-------------------------> end of a device/partition 220 */ 221 222 #define HAMMER_ZONE_RAW_VOLUME 0x1000000000000000ULL 223 #define HAMMER_ZONE_RAW_BUFFER 0x2000000000000000ULL 224 #define HAMMER_ZONE_UNDO 0x3000000000000000ULL 225 #define HAMMER_ZONE_FREEMAP 0x4000000000000000ULL 226 #define HAMMER_ZONE_RESERVED05 0x5000000000000000ULL /* not used */ 227 #define HAMMER_ZONE_RESERVED06 0x6000000000000000ULL /* not used */ 228 #define HAMMER_ZONE_RESERVED07 0x7000000000000000ULL /* not used */ 229 #define HAMMER_ZONE_BTREE 0x8000000000000000ULL 230 #define HAMMER_ZONE_META 0x9000000000000000ULL 231 #define HAMMER_ZONE_LARGE_DATA 0xA000000000000000ULL 232 #define HAMMER_ZONE_SMALL_DATA 0xB000000000000000ULL 233 #define HAMMER_ZONE_RESERVED0C 0xC000000000000000ULL /* not used */ 234 #define HAMMER_ZONE_RESERVED0D 0xD000000000000000ULL /* not used */ 235 #define HAMMER_ZONE_RESERVED0E 0xE000000000000000ULL /* not used */ 236 #define HAMMER_ZONE_UNAVAIL 0xF000000000000000ULL 237 238 #define HAMMER_ZONE_RAW_VOLUME_INDEX 1 239 #define HAMMER_ZONE_RAW_BUFFER_INDEX 2 240 #define HAMMER_ZONE_UNDO_INDEX 3 241 #define HAMMER_ZONE_FREEMAP_INDEX 4 242 #define HAMMER_ZONE_BTREE_INDEX 8 243 #define HAMMER_ZONE_META_INDEX 9 244 #define HAMMER_ZONE_LARGE_DATA_INDEX 10 245 #define HAMMER_ZONE_SMALL_DATA_INDEX 11 246 #define HAMMER_ZONE_UNAVAIL_INDEX 15 247 248 #define HAMMER_MAX_ZONES 16 249 250 #define HAMMER_ZONE(offset) ((offset) & HAMMER_OFF_ZONE_MASK) 251 252 #define hammer_is_zone_raw_volume(offset) \ 253 (HAMMER_ZONE(offset) == HAMMER_ZONE_RAW_VOLUME) 254 #define hammer_is_zone_raw_buffer(offset) \ 255 (HAMMER_ZONE(offset) == HAMMER_ZONE_RAW_BUFFER) 256 #define hammer_is_zone_undo(offset) \ 257 (HAMMER_ZONE(offset) == HAMMER_ZONE_UNDO) 258 #define hammer_is_zone_freemap(offset) \ 259 (HAMMER_ZONE(offset) == HAMMER_ZONE_FREEMAP) 260 #define hammer_is_zone_btree(offset) \ 261 (HAMMER_ZONE(offset) == HAMMER_ZONE_BTREE) 262 #define hammer_is_zone_meta(offset) \ 263 (HAMMER_ZONE(offset) == HAMMER_ZONE_META) 264 #define hammer_is_zone_large_data(offset) \ 265 (HAMMER_ZONE(offset) == HAMMER_ZONE_LARGE_DATA) 266 #define hammer_is_zone_small_data(offset) \ 267 (HAMMER_ZONE(offset) == HAMMER_ZONE_SMALL_DATA) 268 #define hammer_is_zone_unavail(offset) \ 269 (HAMMER_ZONE(offset) == HAMMER_ZONE_UNAVAIL) 270 #define hammer_is_zone_data(offset) \ 271 (hammer_is_zone_large_data(offset) || hammer_is_zone_small_data(offset)) 272 273 #define hammer_is_index_record(zone) \ 274 ((zone) >= HAMMER_ZONE_BTREE_INDEX && \ 275 (zone) < HAMMER_MAX_ZONES) 276 277 #define hammer_is_zone_record(offset) \ 278 hammer_is_index_record(HAMMER_ZONE_DECODE(offset)) 279 280 #define hammer_is_index_direct_xlated(zone) \ 281 (((zone) == HAMMER_ZONE_RAW_BUFFER_INDEX) || \ 282 ((zone) == HAMMER_ZONE_FREEMAP_INDEX) || \ 283 hammer_is_index_record(zone)) 284 285 #define hammer_is_zone_direct_xlated(offset) \ 286 hammer_is_index_direct_xlated(HAMMER_ZONE_DECODE(offset)) 287 288 #define HAMMER_ZONE_ENCODE(zone, ham_off) \ 289 (((hammer_off_t)(zone) << 60) | (ham_off)) 290 #define HAMMER_ZONE_DECODE(ham_off) \ 291 ((int)(((hammer_off_t)(ham_off) >> 60))) 292 293 #define HAMMER_VOL_ENCODE(vol_no) \ 294 ((hammer_off_t)((vol_no) & 255) << 52) 295 #define HAMMER_VOL_DECODE(ham_off) \ 296 ((int)(((hammer_off_t)(ham_off) >> 52) & 255)) 297 298 #define HAMMER_OFF_SHORT_ENCODE(offset) \ 299 ((hammer_off_t)(offset) & HAMMER_OFF_SHORT_MASK) 300 #define HAMMER_OFF_LONG_ENCODE(offset) \ 301 ((hammer_off_t)(offset) & HAMMER_OFF_LONG_MASK) 302 303 #define HAMMER_ENCODE(zone, vol_no, offset) \ 304 (((hammer_off_t)(zone) << 60) | \ 305 HAMMER_VOL_ENCODE(vol_no) | \ 306 HAMMER_OFF_SHORT_ENCODE(offset)) 307 #define HAMMER_ENCODE_RAW_VOLUME(vol_no, offset) \ 308 HAMMER_ENCODE(HAMMER_ZONE_RAW_VOLUME_INDEX, vol_no, offset) 309 #define HAMMER_ENCODE_RAW_BUFFER(vol_no, offset) \ 310 HAMMER_ENCODE(HAMMER_ZONE_RAW_BUFFER_INDEX, vol_no, offset) 311 #define HAMMER_ENCODE_UNDO(offset) \ 312 HAMMER_ENCODE(HAMMER_ZONE_UNDO_INDEX, HAMMER_ROOT_VOLNO, offset) 313 #define HAMMER_ENCODE_FREEMAP(vol_no, offset) \ 314 HAMMER_ENCODE(HAMMER_ZONE_FREEMAP_INDEX, vol_no, offset) 315 316 /* 317 * Translate a zone address to zone-X address. 318 */ 319 #define hammer_xlate_to_zoneX(zone, offset) \ 320 HAMMER_ZONE_ENCODE((zone), (offset) & ~HAMMER_OFF_ZONE_MASK) 321 #define hammer_xlate_to_zone2(offset) \ 322 hammer_xlate_to_zoneX(HAMMER_ZONE_RAW_BUFFER_INDEX, (offset)) 323 324 #define hammer_data_zone(data_len) \ 325 (((data_len) >= HAMMER_BUFSIZE) ? \ 326 HAMMER_ZONE_LARGE_DATA : \ 327 HAMMER_ZONE_SMALL_DATA) 328 #define hammer_data_zone_index(data_len) \ 329 (((data_len) >= HAMMER_BUFSIZE) ? \ 330 HAMMER_ZONE_LARGE_DATA_INDEX : \ 331 HAMMER_ZONE_SMALL_DATA_INDEX) 332 333 /* 334 * Big-Block backing store 335 * 336 * A blockmap is a two-level map which translates a blockmap-backed zone 337 * offset into a raw zone 2 offset. The layer 1 handles 18 bits and the 338 * layer 2 handles 19 bits. The 8M big-block size is 23 bits so two 339 * layers gives us 18+19+23 = 60 bits of address space. 340 * 341 * When using hinting for a blockmap lookup, the hint is lost when the 342 * scan leaves the HINTBLOCK, which is typically several BIGBLOCK's. 343 * HINTBLOCK is a heuristic. 344 */ 345 #define HAMMER_HINTBLOCK_SIZE (HAMMER_BIGBLOCK_SIZE * 4) 346 #define HAMMER_HINTBLOCK_MASK64 ((uint64_t)HAMMER_HINTBLOCK_SIZE - 1) 347 #define HAMMER_BIGBLOCK_SIZE (8192 * 1024) 348 #define HAMMER_BIGBLOCK_SIZE64 ((uint64_t)HAMMER_BIGBLOCK_SIZE) 349 #define HAMMER_BIGBLOCK_MASK (HAMMER_BIGBLOCK_SIZE - 1) 350 #define HAMMER_BIGBLOCK_MASK64 ((uint64_t)HAMMER_BIGBLOCK_SIZE - 1) 351 #define HAMMER_BIGBLOCK_BITS 23 352 #if 0 353 #define HAMMER_BIGBLOCK_OVERFILL (6144 * 1024) 354 #endif 355 #if (1 << HAMMER_BIGBLOCK_BITS) != HAMMER_BIGBLOCK_SIZE 356 #error "HAMMER_BIGBLOCK_BITS BROKEN" 357 #endif 358 359 #define HAMMER_BUFFERS_PER_BIGBLOCK \ 360 (HAMMER_BIGBLOCK_SIZE / HAMMER_BUFSIZE) 361 #define HAMMER_BUFFERS_PER_BIGBLOCK_MASK \ 362 (HAMMER_BUFFERS_PER_BIGBLOCK - 1) 363 #define HAMMER_BUFFERS_PER_BIGBLOCK_MASK64 \ 364 ((hammer_off_t)HAMMER_BUFFERS_PER_BIGBLOCK_MASK) 365 366 #define HAMMER_BIGBLOCK_DOALIGN(offset) \ 367 (((offset) + HAMMER_BIGBLOCK_MASK64) & ~HAMMER_BIGBLOCK_MASK64) 368 369 /* 370 * Maximum number of mirrors operating in master mode (multi-master 371 * clustering and mirroring). Note that HAMMER1 does not support 372 * multi-master clustering as of 2015. 373 */ 374 #define HAMMER_MAX_MASTERS 16 375 376 /* 377 * The blockmap is somewhat of a degenerate structure. HAMMER only actually 378 * uses it in its original incarnation to implement the freemap. 379 * 380 * zone:1 raw volume (no blockmap) 381 * zone:2 raw buffer (no blockmap) 382 * zone:3 undomap (direct layer2 array in volume header) 383 * zone:4 freemap (the only real blockmap) 384 * zone:8-15 zone id used to classify big-block only, address is actually 385 * a zone-2 address. 386 */ 387 typedef struct hammer_blockmap { 388 hammer_off_t phys_offset; /* zone-2 offset only used by zone-4 */ 389 hammer_off_t first_offset; /* zone-X offset only used by zone-3 */ 390 hammer_off_t next_offset; /* zone-X offset for allocation */ 391 hammer_off_t alloc_offset; /* zone-X offset only used by zone-3 */ 392 uint32_t reserved01; 393 hammer_crc_t entry_crc; 394 } *hammer_blockmap_t; 395 396 #define HAMMER_BLOCKMAP_CRCSIZE \ 397 offsetof(struct hammer_blockmap, entry_crc) 398 399 /* 400 * The blockmap is a 2-layer entity made up of big-blocks. The first layer 401 * contains 262144 32-byte entries (18 bits), the second layer contains 402 * 524288 16-byte entries (19 bits), representing 8MB (23 bit) blockmaps. 403 * 18+19+23 = 60 bits. The top four bits are the zone id. 404 * 405 * Currently only the freemap utilizes both layers in all their glory. 406 * All primary data/meta-data zones actually encode a zone-2 address 407 * requiring no real blockmap translation. 408 * 409 * The freemap uses the upper 8 bits of layer-1 to identify the volume, 410 * thus any space allocated via the freemap can be directly translated 411 * to a zone:2 (or zone:8-15) address. 412 * 413 * zone-X blockmap offset: [zone:4][layer1:18][layer2:19][big-block:23] 414 */ 415 416 /* 417 * 32 bytes layer1 entry for 8MB big-block. 418 * A big-block can hold 2^23 / 2^5 = 2^18 layer1 entries, 419 * which equals bits assigned for layer1 in zone-2 address. 420 */ 421 typedef struct hammer_blockmap_layer1 { 422 hammer_off_t blocks_free; /* big-blocks free */ 423 hammer_off_t phys_offset; /* UNAVAIL or zone-2 */ 424 hammer_off_t reserved01; 425 hammer_crc_t layer2_crc; /* xor'd crc's of HAMMER_BLOCKSIZE */ 426 /* (not yet used) */ 427 hammer_crc_t layer1_crc; /* MUST BE LAST FIELD OF STRUCTURE*/ 428 } *hammer_blockmap_layer1_t; 429 430 #define HAMMER_LAYER1_CRCSIZE \ 431 offsetof(struct hammer_blockmap_layer1, layer1_crc) 432 433 /* 434 * 16 bytes layer2 entry for 8MB big-blocks. 435 * A big-block can hold 2^23 / 2^4 = 2^19 layer2 entries, 436 * which equals bits assigned for layer2 in zone-2 address. 437 * 438 * NOTE: bytes_free is signed and can legally go negative if/when data 439 * de-dup occurs. This field will never go higher than 440 * HAMMER_BIGBLOCK_SIZE. If exactly HAMMER_BIGBLOCK_SIZE 441 * the big-block is completely free. 442 */ 443 typedef struct hammer_blockmap_layer2 { 444 uint8_t zone; /* typed allocation zone */ 445 uint8_t reserved01; 446 uint16_t reserved02; 447 uint32_t append_off; /* allocatable space index */ 448 int32_t bytes_free; /* bytes free within this big-block */ 449 hammer_crc_t entry_crc; 450 } *hammer_blockmap_layer2_t; 451 452 #define HAMMER_LAYER2_CRCSIZE \ 453 offsetof(struct hammer_blockmap_layer2, entry_crc) 454 455 #define HAMMER_BLOCKMAP_UNAVAIL ((hammer_off_t)-1LL) 456 457 #define HAMMER_BLOCKMAP_RADIX1 /* 2^18 = 262144 */ \ 458 ((int)(HAMMER_BIGBLOCK_SIZE / sizeof(struct hammer_blockmap_layer1))) 459 #define HAMMER_BLOCKMAP_RADIX2 /* 2^19 = 524288 */ \ 460 ((int)(HAMMER_BIGBLOCK_SIZE / sizeof(struct hammer_blockmap_layer2))) 461 462 #define HAMMER_BLOCKMAP_LAYER1 /* 2^(18+19+23) = 1EB */ \ 463 (HAMMER_BLOCKMAP_RADIX1 * HAMMER_BLOCKMAP_LAYER2) 464 #define HAMMER_BLOCKMAP_LAYER2 /* 2^(19+23) = 4TB */ \ 465 (HAMMER_BLOCKMAP_RADIX2 * HAMMER_BIGBLOCK_SIZE64) 466 467 #define HAMMER_BLOCKMAP_LAYER1_MASK (HAMMER_BLOCKMAP_LAYER1 - 1) 468 #define HAMMER_BLOCKMAP_LAYER2_MASK (HAMMER_BLOCKMAP_LAYER2 - 1) 469 470 #define HAMMER_BLOCKMAP_LAYER2_DOALIGN(offset) \ 471 (((offset) + HAMMER_BLOCKMAP_LAYER2_MASK) & \ 472 ~HAMMER_BLOCKMAP_LAYER2_MASK) 473 474 /* 475 * Index within layer1 or layer2 big-block for the entry representing 476 * a zone-2 physical offset. 477 */ 478 #define HAMMER_BLOCKMAP_LAYER1_INDEX(zone2_offset) \ 479 ((int)(((zone2_offset) & HAMMER_BLOCKMAP_LAYER1_MASK) / \ 480 HAMMER_BLOCKMAP_LAYER2)) 481 482 #define HAMMER_BLOCKMAP_LAYER2_INDEX(zone2_offset) \ 483 ((int)(((zone2_offset) & HAMMER_BLOCKMAP_LAYER2_MASK) / \ 484 HAMMER_BIGBLOCK_SIZE64)) 485 486 /* 487 * Byte offset within layer1 or layer2 big-block for the entry representing 488 * a zone-2 physical offset. Multiply the index by sizeof(blockmap_layer). 489 */ 490 #define HAMMER_BLOCKMAP_LAYER1_OFFSET(zone2_offset) \ 491 (HAMMER_BLOCKMAP_LAYER1_INDEX(zone2_offset) * \ 492 sizeof(struct hammer_blockmap_layer1)) 493 494 #define HAMMER_BLOCKMAP_LAYER2_OFFSET(zone2_offset) \ 495 (HAMMER_BLOCKMAP_LAYER2_INDEX(zone2_offset) * \ 496 sizeof(struct hammer_blockmap_layer2)) 497 498 /* 499 * Move on to offset 0 of the next layer1 or layer2. 500 */ 501 #define HAMMER_ZONE_LAYER1_NEXT_OFFSET(offset) \ 502 (((offset) + HAMMER_BLOCKMAP_LAYER2) & ~HAMMER_BLOCKMAP_LAYER2_MASK) 503 504 #define HAMMER_ZONE_LAYER2_NEXT_OFFSET(offset) \ 505 (((offset) + HAMMER_BIGBLOCK_SIZE) & ~HAMMER_BIGBLOCK_MASK64) 506 507 /* 508 * HAMMER UNDO parameters. The UNDO fifo is mapped directly in the volume 509 * header with an array of zone-2 offsets. A maximum of (128x8MB) = 1GB, 510 * and minimum of (64x8MB) = 512MB may be reserved. The size of the undo 511 * fifo is usually set a newfs time. 512 */ 513 #define HAMMER_MIN_UNDO_BIGBLOCKS 64 514 #define HAMMER_MAX_UNDO_BIGBLOCKS 128 515 516 /* 517 * All on-disk HAMMER structures which make up elements of the UNDO FIFO 518 * contain a hammer_fifo_head and hammer_fifo_tail structure. This structure 519 * contains all the information required to validate the fifo element 520 * and to scan the fifo in either direction. The head is typically embedded 521 * in higher level hammer on-disk structures while the tail is typically 522 * out-of-band. hdr_size is the size of the whole mess, including the tail. 523 * 524 * All undo structures are guaranteed to not cross a 16K filesystem 525 * buffer boundary. Most undo structures are fairly small. Data spaces 526 * are not immediately reused by HAMMER so file data is not usually recorded 527 * as part of an UNDO. 528 * 529 * PAD elements are allowed to take up only 8 bytes of space as a special 530 * case, containing only hdr_signature, hdr_type, and hdr_size fields, 531 * and with the tail overloaded onto the head structure for 8 bytes total. 532 * 533 * Every undo record has a sequence number. This number is unrelated to 534 * transaction ids and instead collects the undo transactions associated 535 * with a single atomic operation. A larger transactional operation, such 536 * as a remove(), may consist of several smaller atomic operations 537 * representing raw meta-data operations. 538 * 539 * HAMMER VERSION 4 CHANGES 540 * 541 * In HAMMER version 4 the undo structure alignment is reduced from 16384 542 * to 512 bytes in order to ensure that each 512 byte sector begins with 543 * a header. The hdr_seq field in the header is a 32 bit sequence number 544 * which allows the recovery code to detect missing sectors 545 * without relying on the 32-bit crc and to definitively identify the current 546 * undo sequence space without having to rely on information from the volume 547 * header. In addition, new REDO entries in the undo space are used to 548 * record write, write/extend, and transaction id updates. 549 * 550 * The grand result is: 551 * 552 * (1) The volume header no longer needs to be synchronized for most 553 * flush and fsync operations. 554 * 555 * (2) Most fsync operations need only lay down REDO records 556 * 557 * (3) Data overwrite for nohistory operations covered by REDO records 558 * can be supported (instead of rolling a new block allocation), 559 * by rolling UNDO for the prior contents of the data. 560 * 561 * HAMMER VERSION 5 CHANGES 562 * 563 * Hammer version 5 contains a minor adjustment making layer2's bytes_free 564 * field signed, allowing dedup to push it into the negative domain. 565 */ 566 #define HAMMER_HEAD_ALIGN 8 567 #define HAMMER_HEAD_ALIGN_MASK (HAMMER_HEAD_ALIGN - 1) 568 #define HAMMER_HEAD_DOALIGN(bytes) \ 569 (((bytes) + HAMMER_HEAD_ALIGN_MASK) & ~HAMMER_HEAD_ALIGN_MASK) 570 571 #define HAMMER_UNDO_ALIGN 512 572 #define HAMMER_UNDO_ALIGN64 ((uint64_t)512) 573 #define HAMMER_UNDO_MASK (HAMMER_UNDO_ALIGN - 1) 574 #define HAMMER_UNDO_MASK64 (HAMMER_UNDO_ALIGN64 - 1) 575 #define HAMMER_UNDO_DOALIGN(offset) \ 576 (((offset) + HAMMER_UNDO_MASK) & ~HAMMER_UNDO_MASK64) 577 578 typedef struct hammer_fifo_head { 579 uint16_t hdr_signature; 580 uint16_t hdr_type; 581 uint32_t hdr_size; /* Aligned size of the whole mess */ 582 uint32_t hdr_seq; /* Sequence number */ 583 hammer_crc_t hdr_crc; /* XOR crc up to field w/ crc after field */ 584 } *hammer_fifo_head_t; 585 586 #define HAMMER_FIFO_HEAD_CRCOFF offsetof(struct hammer_fifo_head, hdr_crc) 587 588 typedef struct hammer_fifo_tail { 589 uint16_t tail_signature; 590 uint16_t tail_type; 591 uint32_t tail_size; /* aligned size of the whole mess */ 592 } *hammer_fifo_tail_t; 593 594 /* 595 * Fifo header types. 596 * 597 * NOTE: 0x8000U part of HAMMER_HEAD_TYPE_PAD can be removed if the HAMMER 598 * version ever gets bumped again. It exists only to keep compatibility with 599 * older versions. 600 */ 601 #define HAMMER_HEAD_TYPE_PAD (0x0040U | 0x8000U) 602 #define HAMMER_HEAD_TYPE_DUMMY 0x0041U /* dummy entry w/seqno */ 603 #define HAMMER_HEAD_TYPE_UNDO 0x0043U /* random UNDO information */ 604 #define HAMMER_HEAD_TYPE_REDO 0x0044U /* data REDO / fast fsync */ 605 606 #define HAMMER_HEAD_SIGNATURE 0xC84EU 607 #define HAMMER_TAIL_SIGNATURE 0xC74FU 608 609 /* 610 * Misc FIFO structures. 611 * 612 * UNDO - Raw meta-data media updates. 613 */ 614 typedef struct hammer_fifo_undo { 615 struct hammer_fifo_head head; 616 hammer_off_t undo_offset; /* zone-1,2 offset */ 617 int32_t undo_data_bytes; 618 int32_t undo_reserved01; 619 /* followed by data */ 620 } *hammer_fifo_undo_t; 621 622 /* 623 * REDO (HAMMER version 4+) - Logical file writes/truncates. 624 * 625 * REDOs contain information which will be duplicated in a later meta-data 626 * update, allowing fast write()+fsync() operations. REDOs can be ignored 627 * without harming filesystem integrity but must be processed if fsync() 628 * semantics are desired. 629 * 630 * Unlike UNDOs which are processed backwards within the recovery span, 631 * REDOs must be processed forwards starting further back (starting outside 632 * the recovery span). 633 * 634 * WRITE - Write logical file (with payload). Executed both 635 * out-of-span and in-span. Out-of-span WRITEs may be 636 * filtered out by TERMs. 637 * 638 * TRUNC - Truncate logical file (no payload). Executed both 639 * out-of-span and in-span. Out-of-span WRITEs may be 640 * filtered out by TERMs. 641 * 642 * TERM_* - Indicates meta-data was committed (if out-of-span) or 643 * will be rolled-back (in-span). Any out-of-span TERMs 644 * matching earlier WRITEs remove those WRITEs from 645 * consideration as they might conflict with a later data 646 * commit (which is not being rolled-back). 647 * 648 * SYNC - The earliest in-span SYNC (the last one when scanning 649 * backwards) tells the recovery code how far out-of-span 650 * it must go to run REDOs. 651 * 652 * NOTE: WRITEs do not always have matching TERMs even under 653 * perfect conditions because truncations might remove the 654 * buffers from consideration. I/O problems can also remove 655 * buffers from consideration. 656 * 657 * TRUNCSs do not always have matching TERMs because several 658 * truncations may be aggregated together into a single TERM. 659 */ 660 typedef struct hammer_fifo_redo { 661 struct hammer_fifo_head head; 662 int64_t redo_objid; /* file being written */ 663 hammer_off_t redo_offset; /* logical offset in file */ 664 int32_t redo_data_bytes; 665 uint32_t redo_flags; 666 uint32_t redo_localization; 667 uint32_t redo_reserved01; 668 uint64_t redo_reserved02; 669 /* followed by data */ 670 } *hammer_fifo_redo_t; 671 672 #define HAMMER_REDO_WRITE 0x00000001 673 #define HAMMER_REDO_TRUNC 0x00000002 674 #define HAMMER_REDO_TERM_WRITE 0x00000004 675 #define HAMMER_REDO_TERM_TRUNC 0x00000008 676 #define HAMMER_REDO_SYNC 0x00000010 677 678 typedef union hammer_fifo_any { 679 struct hammer_fifo_head head; 680 struct hammer_fifo_undo undo; 681 struct hammer_fifo_redo redo; 682 } *hammer_fifo_any_t; 683 684 /* 685 * Volume header types 686 */ 687 #define HAMMER_FSBUF_VOLUME 0xC8414D4DC5523031ULL /* HAMMER01 */ 688 #define HAMMER_FSBUF_VOLUME_REV 0x313052C54D4D41C8ULL /* (reverse endian) */ 689 690 /* 691 * HAMMER Volume header 692 * 693 * A HAMMER filesystem can be built from 1-256 block devices, each block 694 * device contains a volume header followed by however many buffers fit 695 * into the volume. 696 * 697 * One of the volumes making up a HAMMER filesystem is the root volume. 698 * The root volume is always volume #0 which is the first block device path 699 * specified by newfs_hammer(8). All HAMMER volumes have a volume header, 700 * however the root volume may be the only volume that has valid values for 701 * some fields in the header. 702 * 703 * Special field notes: 704 * 705 * vol_bot_beg - offset of boot area (mem_beg - bot_beg bytes) 706 * vol_mem_beg - offset of memory log (buf_beg - mem_beg bytes) 707 * vol_buf_beg - offset of the first buffer in volume 708 * vol_buf_end - offset of volume EOF (on buffer boundary) 709 * 710 * The memory log area allows a kernel to cache new records and data 711 * in memory without allocating space in the actual filesystem to hold 712 * the records and data. In the event that a filesystem becomes full, 713 * any records remaining in memory can be flushed to the memory log 714 * area. This allows the kernel to immediately return success. 715 * 716 * The buffer offset is a physical offset of zone-2 offset. The lower 717 * 52 bits of the zone-2 offset is added to the buffer offset of each 718 * volume to generate an actual I/O offset within the block device. 719 * 720 * NOTE: boot area and memory log are currently not used. 721 */ 722 723 /* 724 * Filesystem type string 725 */ 726 #define HAMMER_FSTYPE_STRING "DragonFly HAMMER" 727 728 /* 729 * These macros are only used by userspace when userspace commands either 730 * initialize or add a new HAMMER volume. 731 */ 732 #define HAMMER_BOOT_MINBYTES (32*1024) 733 #define HAMMER_BOOT_NOMBYTES (64LL*1024*1024) 734 #define HAMMER_BOOT_MAXBYTES (256LL*1024*1024) 735 736 #define HAMMER_MEM_MINBYTES (256*1024) 737 #define HAMMER_MEM_NOMBYTES (1LL*1024*1024*1024) 738 #define HAMMER_MEM_MAXBYTES (64LL*1024*1024*1024) 739 740 typedef struct hammer_volume_ondisk { 741 uint64_t vol_signature; /* HAMMER_FSBUF_VOLUME for a valid header */ 742 743 /* 744 * These are relative to block device offset, not zone offsets. 745 */ 746 int64_t vol_bot_beg; /* offset of boot area */ 747 int64_t vol_mem_beg; /* offset of memory log */ 748 int64_t vol_buf_beg; /* offset of the first buffer in volume */ 749 int64_t vol_buf_end; /* offset of volume EOF (on buffer boundary) */ 750 int64_t vol_reserved01; 751 752 hammer_uuid_t vol_fsid; /* identify filesystem */ 753 hammer_uuid_t vol_fstype; /* identify filesystem type */ 754 char vol_label[64]; /* filesystem label */ 755 756 int32_t vol_no; /* volume number within filesystem */ 757 int32_t vol_count; /* number of volumes making up filesystem */ 758 759 uint32_t vol_version; /* version control information */ 760 hammer_crc_t vol_crc; /* header crc */ 761 uint32_t vol_flags; /* volume flags */ 762 uint32_t vol_rootvol; /* the root volume number (must be 0) */ 763 764 uint32_t vol_reserved[8]; 765 766 /* 767 * These fields are initialized and space is reserved in every 768 * volume making up a HAMMER filesystem, but only the root volume 769 * contains valid data. Note that vol0_stat_bigblocks does not 770 * include big-blocks for freemap and undomap initially allocated 771 * by newfs_hammer(8). 772 */ 773 int64_t vol0_stat_bigblocks; /* total big-blocks when fs is empty */ 774 int64_t vol0_stat_freebigblocks;/* number of free big-blocks */ 775 int64_t vol0_reserved01; 776 int64_t vol0_stat_inodes; /* for statfs only */ 777 int64_t vol0_reserved02; 778 hammer_off_t vol0_btree_root; /* B-Tree root offset in zone-8 */ 779 hammer_tid_t vol0_next_tid; /* highest partially synchronized TID */ 780 hammer_off_t vol0_reserved03; 781 782 /* 783 * Blockmaps for zones. Not all zones use a blockmap. Note that 784 * the entire root blockmap is cached in the hammer_mount structure. 785 */ 786 struct hammer_blockmap vol0_blockmap[HAMMER_MAX_ZONES]; 787 788 /* 789 * Array of zone-2 addresses for undo FIFO. 790 */ 791 hammer_off_t vol0_undo_array[HAMMER_MAX_UNDO_BIGBLOCKS]; 792 } *hammer_volume_ondisk_t; 793 794 #define HAMMER_ROOT_VOLNO 0 795 796 #define HAMMER_VOLF_NEEDFLUSH 0x0004 /* volume needs flush */ 797 798 #define HAMMER_VOL_CRCSIZE1 \ 799 offsetof(struct hammer_volume_ondisk, vol_crc) 800 #define HAMMER_VOL_CRCSIZE2 \ 801 (sizeof(struct hammer_volume_ondisk) - HAMMER_VOL_CRCSIZE1 - \ 802 sizeof(hammer_crc_t)) 803 804 #define HAMMER_VOL_VERSION_MIN 1 /* minimum supported version */ 805 #define HAMMER_VOL_VERSION_DEFAULT 7 /* newfs default version */ 806 #define HAMMER_VOL_VERSION_WIP 8 /* version >= this is WIP */ 807 #define HAMMER_VOL_VERSION_MAX 7 /* maximum supported version */ 808 809 #define HAMMER_VOL_VERSION_ONE 1 810 #define HAMMER_VOL_VERSION_TWO 2 /* new dirent layout (2.3+) */ 811 #define HAMMER_VOL_VERSION_THREE 3 /* new snapshot layout (2.5+) */ 812 #define HAMMER_VOL_VERSION_FOUR 4 /* new undo/flush (2.5+) */ 813 #define HAMMER_VOL_VERSION_FIVE 5 /* dedup (2.9+) */ 814 #define HAMMER_VOL_VERSION_SIX 6 /* DIRHASH_ALG1 */ 815 #define HAMMER_VOL_VERSION_SEVEN 7 /* use the faster iscsi_crc */ 816 817 /* 818 * Translate a zone-2 address to physical address 819 */ 820 #define hammer_xlate_to_phys(volume, zone2_offset) \ 821 ((volume)->vol_buf_beg + HAMMER_OFF_SHORT_ENCODE(zone2_offset)) 822 823 /* 824 * Translate a zone-3 address to zone-2 address 825 */ 826 #define HAMMER_UNDO_INDEX(zone3_offset) \ 827 (HAMMER_OFF_SHORT_ENCODE(zone3_offset) / HAMMER_BIGBLOCK_SIZE) 828 829 #define hammer_xlate_to_undo(volume, zone3_offset) \ 830 ((volume)->vol0_undo_array[HAMMER_UNDO_INDEX(zone3_offset)] + \ 831 (zone3_offset & HAMMER_BIGBLOCK_MASK64)) 832 833 /* 834 * Effective per-volume filesystem capacity including big-blocks for layer1/2 835 */ 836 #define HAMMER_VOL_BUF_SIZE(volume) \ 837 ((volume)->vol_buf_end - (volume)->vol_buf_beg) 838 839 /* 840 * Record types are fairly straightforward. The B-Tree includes the record 841 * type in its index sort. 842 */ 843 #define HAMMER_RECTYPE_UNKNOWN 0x0000 844 #define HAMMER_RECTYPE_INODE 0x0001 /* inode in obj_id space */ 845 #define HAMMER_RECTYPE_DATA 0x0010 846 #define HAMMER_RECTYPE_DIRENTRY 0x0011 847 #define HAMMER_RECTYPE_DB 0x0012 848 #define HAMMER_RECTYPE_EXT 0x0013 /* ext attributes */ 849 #define HAMMER_RECTYPE_FIX 0x0014 /* fixed attribute */ 850 #define HAMMER_RECTYPE_PFS 0x0015 /* PFS management */ 851 #define HAMMER_RECTYPE_SNAPSHOT 0x0016 /* Snapshot management */ 852 #define HAMMER_RECTYPE_CONFIG 0x0017 /* hammer cleanup config */ 853 #define HAMMER_RECTYPE_MAX 0xFFFF 854 855 #define HAMMER_RECTYPE_ENTRY_START (HAMMER_RECTYPE_INODE + 1) 856 #define HAMMER_RECTYPE_CLEAN_START HAMMER_RECTYPE_EXT 857 858 #define HAMMER_FIXKEY_SYMLINK 1 859 860 #define HAMMER_OBJTYPE_UNKNOWN 0 /* never exists on-disk as unknown */ 861 #define HAMMER_OBJTYPE_DIRECTORY 1 862 #define HAMMER_OBJTYPE_REGFILE 2 863 #define HAMMER_OBJTYPE_DBFILE 3 864 #define HAMMER_OBJTYPE_FIFO 4 865 #define HAMMER_OBJTYPE_CDEV 5 866 #define HAMMER_OBJTYPE_BDEV 6 867 #define HAMMER_OBJTYPE_SOFTLINK 7 868 #define HAMMER_OBJTYPE_PSEUDOFS 8 /* pseudo filesystem obj */ 869 #define HAMMER_OBJTYPE_SOCKET 9 870 871 /* 872 * HAMMER inode attribute data 873 * 874 * The data reference for a HAMMER inode points to this structure. Any 875 * modifications to the contents of this structure will result in a 876 * replacement operation. 877 * 878 * parent_obj_id is only valid for directories (which cannot be hard-linked), 879 * and specifies the parent directory obj_id. This field will also be set 880 * for non-directory inodes as a recovery aid, but can wind up holding 881 * stale information. However, since object id's are not reused, the worse 882 * that happens is that the recovery code is unable to use it. 883 * A parent_obj_id of 0 means it's a root inode of root or non-root PFS. 884 * 885 * NOTE: Future note on directory hardlinks. We can implement a record type 886 * which allows us to point to multiple parent directories. 887 */ 888 typedef struct hammer_inode_data { 889 uint16_t version; /* inode data version */ 890 uint16_t mode; /* basic unix permissions */ 891 uint32_t uflags; /* chflags */ 892 uint32_t rmajor; /* used by device nodes */ 893 uint32_t rminor; /* used by device nodes */ 894 uint64_t ctime; 895 int64_t parent_obj_id; /* parent directory obj_id */ 896 hammer_uuid_t uid; 897 hammer_uuid_t gid; 898 899 uint8_t obj_type; 900 uint8_t cap_flags; /* capability support flags (extension) */ 901 uint16_t reserved01; 902 uint32_t reserved02; 903 uint64_t nlinks; /* hard links */ 904 uint64_t size; /* filesystem object size */ 905 union { 906 char symlink[24]; /* HAMMER_INODE_BASESYMLEN */ 907 } ext; 908 uint64_t mtime; /* mtime must be second-to-last */ 909 uint64_t atime; /* atime must be last */ 910 } *hammer_inode_data_t; 911 912 /* 913 * Neither mtime nor atime updates are CRCd by the B-Tree element. 914 * mtime updates have UNDO, atime updates do not. 915 */ 916 #define HAMMER_INODE_CRCSIZE \ 917 offsetof(struct hammer_inode_data, mtime) 918 919 #define HAMMER_INODE_DATA_VERSION 1 920 #define HAMMER_OBJID_ROOT 1 /* root inodes # */ 921 #define HAMMER_INODE_BASESYMLEN 24 /* see ext.symlink */ 922 923 /* 924 * Capability & implementation flags. 925 * 926 * HAMMER_INODE_CAP_DIR_LOCAL_INO - Use inode B-Tree localization 927 * for directory entries. Also see HAMMER_DIR_INODE_LOCALIZATION(). 928 */ 929 #define HAMMER_INODE_CAP_DIRHASH_MASK 0x03 /* directory: hash algorithm */ 930 #define HAMMER_INODE_CAP_DIRHASH_ALG0 0x00 931 #define HAMMER_INODE_CAP_DIRHASH_ALG1 0x01 932 #define HAMMER_INODE_CAP_DIRHASH_ALG2 0x02 933 #define HAMMER_INODE_CAP_DIRHASH_ALG3 0x03 934 #define HAMMER_INODE_CAP_DIR_LOCAL_INO 0x04 /* use inode localization */ 935 936 #define HAMMER_DATA_DOALIGN(offset) \ 937 (((offset) + 15) & ~15) 938 #define HAMMER_DATA_DOALIGN_WITH(type, offset) \ 939 (((type)(offset) + 15) & (~(type)15)) 940 941 /* 942 * A HAMMER directory entry associates a HAMMER filesystem object with a 943 * namespace. It is hooked into a pseudo-filesystem (with its own inode 944 * numbering space) in the filesystem by setting the high 16 bits of the 945 * localization field. The low 16 bits must be 0 and are reserved for 946 * future use. 947 * 948 * Directory entries are indexed with a 128 bit namekey rather then an 949 * offset. A portion of the namekey is an iterator/randomizer to deal 950 * with collisions. 951 * 952 * NOTE: leaf.base.obj_type from the related B-Tree leaf entry holds 953 * the filesystem object type of obj_id, e.g. a den_type equivalent. 954 * It is not stored in hammer_direntry_data. 955 * 956 * NOTE: name field / the filename data reference is NOT terminated with \0. 957 */ 958 typedef struct hammer_direntry_data { 959 int64_t obj_id; /* object being referenced */ 960 uint32_t localization; /* identify pseudo-filesystem */ 961 uint32_t reserved01; 962 char name[16]; /* name (extended) */ 963 } *hammer_direntry_data_t; 964 965 #define HAMMER_ENTRY_NAME_OFF offsetof(struct hammer_direntry_data, name[0]) 966 #define HAMMER_ENTRY_SIZE(nlen) offsetof(struct hammer_direntry_data, name[nlen]) 967 968 /* 969 * Symlink data which does not fit in the inode is stored in a separate 970 * FIX type record. 971 */ 972 typedef struct hammer_symlink_data { 973 char name[16]; /* name (extended) */ 974 } *hammer_symlink_data_t; 975 976 #define HAMMER_SYMLINK_NAME_OFF offsetof(struct hammer_symlink_data, name[0]) 977 978 /* 979 * The root inode for the primary filesystem and root inode for any 980 * pseudo-fs may be tagged with an optional data structure using 981 * HAMMER_RECTYPE_PFS and localization id. This structure allows 982 * the node to be used as a mirroring master or slave. 983 * 984 * When operating as a slave CD's into the node automatically become read-only 985 * and as-of sync_end_tid. 986 * 987 * When operating as a master the read PFSD info sets sync_end_tid to 988 * the most recently flushed TID. 989 * 990 * sync_low_tid is not yet used but will represent the highest pruning 991 * end-point, after which full history is available. 992 * 993 * We need to pack this structure making it equally sized on both 32-bit and 994 * 64-bit machines as it is part of struct hammer_ioc_mrecord_pfs which is 995 * send over the wire in hammer mirror operations. Only on 64-bit machines 996 * the size of this struct differ when packed or not. This leads us to the 997 * situation where old 64-bit systems (using the non-packed structure), 998 * which were never able to mirror to/from 32-bit systems, are now no longer 999 * able to mirror to/from newer 64-bit systems (using the packed structure). 1000 */ 1001 struct hammer_pseudofs_data { 1002 hammer_tid_t sync_low_tid; /* full history beyond this point */ 1003 hammer_tid_t sync_beg_tid; /* earliest tid w/ full history avail */ 1004 hammer_tid_t sync_end_tid; /* current synchronizatoin point */ 1005 uint64_t sync_beg_ts; /* real-time of last completed sync */ 1006 uint64_t sync_end_ts; /* initiation of current sync cycle */ 1007 hammer_uuid_t shared_uuid; /* shared uuid (match required) */ 1008 hammer_uuid_t unique_uuid; /* unique uuid of this master/slave */ 1009 int32_t reserved01; /* reserved for future master_id */ 1010 int32_t mirror_flags; /* misc flags */ 1011 char label[64]; /* filesystem space label */ 1012 char snapshots[64]; /* softlink dir for pruning */ 1013 int32_t reserved02; /* was prune_{time,freq} */ 1014 int32_t reserved03; /* was reblock_{time,freq} */ 1015 int32_t reserved04; /* was snapshot_freq */ 1016 int32_t prune_min; /* do not prune recent history */ 1017 int32_t prune_max; /* do not retain history beyond here */ 1018 int32_t reserved[16]; 1019 } __packed; 1020 1021 typedef struct hammer_pseudofs_data *hammer_pseudofs_data_t; 1022 1023 #define HAMMER_PFSD_SLAVE 0x00000001 1024 #define HAMMER_PFSD_DELETED 0x80000000 1025 1026 #define hammer_is_pfs_slave(pfsd) \ 1027 (((pfsd)->mirror_flags & HAMMER_PFSD_SLAVE) != 0) 1028 #define hammer_is_pfs_master(pfsd) \ 1029 (!hammer_is_pfs_slave(pfsd)) 1030 #define hammer_is_pfs_deleted(pfsd) \ 1031 (((pfsd)->mirror_flags & HAMMER_PFSD_DELETED) != 0) 1032 1033 #define HAMMER_MAX_PFS 65536 1034 #define HAMMER_MAX_PFSID (HAMMER_MAX_PFS - 1) 1035 #define HAMMER_ROOT_PFSID 0 1036 1037 /* 1038 * Snapshot meta-data { Objid = HAMMER_OBJID_ROOT, Key = tid, rectype = SNAPSHOT }. 1039 * 1040 * Snapshot records replace the old <fs>/snapshots/<softlink> methodology. Snapshot 1041 * records are mirrored but may be independently managed once they are laid down on 1042 * a slave. 1043 * 1044 * NOTE: The b-tree key is signed, the tid is not, so callers must still sort the 1045 * results. 1046 * 1047 * NOTE: Reserved fields must be zero (as usual) 1048 */ 1049 typedef struct hammer_snapshot_data { 1050 hammer_tid_t tid; /* the snapshot TID itself (== key) */ 1051 uint64_t ts; /* real-time when snapshot was made */ 1052 uint64_t reserved01; 1053 uint64_t reserved02; 1054 char label[64]; /* user-supplied description */ 1055 uint64_t reserved03[4]; 1056 } *hammer_snapshot_data_t; 1057 1058 /* 1059 * Config meta-data { ObjId = HAMMER_OBJID_ROOT, Key = 0, rectype = CONFIG }. 1060 * 1061 * Used to store the hammer cleanup config. This data is not mirrored. 1062 */ 1063 typedef struct hammer_config_data { 1064 char text[1024]; 1065 } *hammer_config_data_t; 1066 1067 /* 1068 * Rollup various structures embedded as record data 1069 */ 1070 typedef union hammer_data_ondisk { 1071 struct hammer_direntry_data entry; 1072 struct hammer_inode_data inode; 1073 struct hammer_symlink_data symlink; 1074 struct hammer_pseudofs_data pfsd; 1075 struct hammer_snapshot_data snap; 1076 struct hammer_config_data config; 1077 } *hammer_data_ondisk_t; 1078 1079 /* 1080 * Ondisk layout of B-Tree related structures 1081 */ 1082 #if 0 /* Not needed for fstype(8) */ 1083 #include "hammer_btree.h" 1084 #endif 1085 1086 #define HAMMER_DIR_INODE_LOCALIZATION(ino_data) \ 1087 (((ino_data)->cap_flags & HAMMER_INODE_CAP_DIR_LOCAL_INO) ? \ 1088 HAMMER_LOCALIZE_INODE : \ 1089 HAMMER_LOCALIZE_MISC) 1090 1091 #endif /* !VFS_HAMMER_DISK_H_ */ 1092