1 /*- 2 * SPDX-License-Identifier: BSD-2-Clause 3 * 4 * Copyright (c) 2006 Sam Leffler, Errno Consulting 5 * All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer, 12 * without modification. 13 * 2. Redistributions in binary form must reproduce at minimum a disclaimer 14 * similar to the "NO WARRANTY" disclaimer below ("Disclaimer") and any 15 * redistribution must be conditioned upon including a substantially 16 * similar Disclaimer requirement for further binary redistribution. 17 * 18 * NO WARRANTY 19 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 20 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 21 * LIMITED TO, THE IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTIBILITY 22 * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL 23 * THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, 24 * OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 25 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 26 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER 27 * IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 28 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF 29 * THE POSSIBILITY OF SUCH DAMAGES. 30 * 31 * $FreeBSD$ 32 */ 33 34 /* 35 * Atheros AR5523 USB Station Firmware downloader. 36 * 37 * uathload -d ugen-device [firmware-file] 38 * 39 * Intended to be called from devd on device discovery. 40 */ 41 #include <sys/types.h> 42 #include <sys/stat.h> 43 #include <sys/endian.h> 44 #include <sys/mman.h> 45 46 #include <sys/ioctl.h> 47 #include <dev/usb/usb.h> 48 #include <dev/usb/usb_ioctl.h> 49 50 #include <err.h> 51 #include <fcntl.h> 52 #include <libgen.h> 53 #include <paths.h> 54 #include <stdio.h> 55 #include <stdlib.h> 56 #include <string.h> 57 #include <strings.h> 58 #include <unistd.h> 59 60 /* all fields are big endian */ 61 struct uath_fwmsg { 62 uint32_t flags; 63 #define UATH_WRITE_BLOCK (1 << 4) 64 65 uint32_t len; 66 #define UATH_MAX_FWBLOCK_SIZE 2048 67 68 uint32_t total; 69 uint32_t remain; 70 uint32_t rxtotal; 71 uint32_t pad[123]; 72 } __packed; 73 74 #define UATH_DATA_TIMEOUT 10000 75 #define UATH_CMD_TIMEOUT 1000 76 77 #define VERBOSE(_fmt, ...) do { \ 78 if (verbose) { \ 79 printf(_fmt, __VA_ARGS__); \ 80 fflush(stdout); \ 81 } \ 82 } while (0) 83 84 extern uint8_t _binary_ar5523_bin_start; 85 extern uint8_t _binary_ar5523_bin_end; 86 87 static int 88 getdevname(const char *udevname, char *msgdev, char *datadev) 89 { 90 char *bn, *bnbuf, *dn, *dnbuf; 91 92 dnbuf = strdup(udevname); 93 if (dnbuf == NULL) 94 return (-1); 95 dn = dirname(dnbuf); 96 bnbuf = strdup(udevname); 97 if (bnbuf == NULL) { 98 free(dnbuf); 99 return (-1); 100 } 101 bn = basename(bnbuf); 102 if (strncmp(bn, "ugen", 4) != 0) { 103 free(dnbuf); 104 free(bnbuf); 105 return (-1); 106 } 107 bn += 4; 108 109 /* NB: pipes are hardcoded */ 110 snprintf(msgdev, 256, "%s/usb/%s.1", dn, bn); 111 snprintf(datadev, 256, "%s/usb/%s.2", dn, bn); 112 free(dnbuf); 113 free(bnbuf); 114 return (0); 115 } 116 117 static void 118 usage(void) 119 { 120 errx(-1, "usage: uathload [-v] -d devname [firmware]"); 121 } 122 123 int 124 main(int argc, char *argv[]) 125 { 126 const char *fwname, *udevname; 127 char msgdev[256], datadev[256]; 128 struct uath_fwmsg txmsg, rxmsg; 129 char *txdata; 130 struct stat sb; 131 int msg, data, fw, timeout, b, c; 132 int bufsize = 512, verbose = 0; 133 ssize_t len; 134 135 udevname = NULL; 136 while ((c = getopt(argc, argv, "d:v")) != -1) { 137 switch (c) { 138 case 'd': 139 udevname = optarg; 140 break; 141 case 'v': 142 verbose = 1; 143 break; 144 default: 145 usage(); 146 /*NOTREACHED*/ 147 } 148 } 149 argc -= optind; 150 argv += optind; 151 152 if (udevname == NULL) 153 errx(-1, "No device name; use -d to specify the ugen device"); 154 if (argc > 1) 155 usage(); 156 157 if (argc == 1) 158 fwname = argv[0]; 159 else 160 fwname = _PATH_FIRMWARE "/ar5523.bin"; 161 fw = open(fwname, O_RDONLY, 0); 162 if (fw < 0) 163 err(-1, "open(%s)", fwname); 164 if (fstat(fw, &sb) < 0) 165 err(-1, "fstat(%s)", fwname); 166 txdata = mmap(NULL, sb.st_size, PROT_READ, MAP_PRIVATE, fw, 0); 167 if (txdata == MAP_FAILED) 168 err(-1, "mmap(%s)", fwname); 169 len = sb.st_size; 170 /* XXX verify device is an AR5005 part */ 171 if (getdevname(udevname, msgdev, datadev)) 172 err(-1, "getdevname error"); 173 174 msg = open(msgdev, O_RDWR, 0); 175 if (msg < 0) 176 err(-1, "open(%s)", msgdev); 177 timeout = UATH_DATA_TIMEOUT; 178 if (ioctl(msg, USB_SET_RX_TIMEOUT, &timeout) < 0) 179 err(-1, "%s: USB_SET_RX_TIMEOUT(%u)", msgdev, UATH_DATA_TIMEOUT); 180 if (ioctl(msg, USB_SET_RX_BUFFER_SIZE, &bufsize) < 0) 181 err(-1, "%s: USB_SET_RX_BUFFER_SIZE(%u)", msgdev, bufsize); 182 183 data = open(datadev, O_WRONLY, 0); 184 if (data < 0) 185 err(-1, "open(%s)", datadev); 186 timeout = UATH_DATA_TIMEOUT; 187 if (ioctl(data, USB_SET_TX_TIMEOUT, &timeout) < 0) 188 err(-1, "%s: USB_SET_TX_TIMEOUT(%u)", datadev, 189 UATH_DATA_TIMEOUT); 190 191 VERBOSE("Load firmware %s to %s\n", fwname, udevname); 192 193 bzero(&txmsg, sizeof (struct uath_fwmsg)); 194 txmsg.flags = htobe32(UATH_WRITE_BLOCK); 195 txmsg.total = htobe32(len); 196 197 b = 0; 198 while (len > 0) { 199 int mlen; 200 201 mlen = len; 202 if (mlen > UATH_MAX_FWBLOCK_SIZE) 203 mlen = UATH_MAX_FWBLOCK_SIZE; 204 txmsg.remain = htobe32(len - mlen); 205 txmsg.len = htobe32(mlen); 206 207 /* send firmware block meta-data */ 208 VERBOSE("send block %2u: %zd bytes remaining", b, len - mlen); 209 if (write(msg, &txmsg, sizeof(txmsg)) != sizeof(txmsg)) { 210 VERBOSE("%s", "\n"); 211 err(-1, "error sending msg (%s)", msgdev); 212 break; 213 } 214 215 /* send firmware block data */ 216 VERBOSE("%s", "\n : data..."); 217 if (write(data, txdata, mlen) != mlen) { 218 VERBOSE("%s", "\n"); 219 err(-1, "error sending data (%s)", datadev); 220 break; 221 } 222 223 /* wait for ack from firmware */ 224 VERBOSE("%s", "\n : wait for ack..."); 225 bzero(&rxmsg, sizeof(rxmsg)); 226 if (read(msg, &rxmsg, sizeof(rxmsg)) != sizeof(rxmsg)) { 227 VERBOSE("%s", "\n"); 228 err(-1, "error reading msg (%s)", msgdev); 229 break; 230 } 231 232 VERBOSE("flags=0x%x total=%d\n", 233 be32toh(rxmsg.flags), be32toh(rxmsg.rxtotal)); 234 len -= mlen; 235 txdata += mlen; 236 b++; 237 } 238 sleep(1); 239 close(fw); 240 close(msg); 241 close(data); 242 return 0; 243 } 244