xref: /illumos-gate/usr/src/cmd/gss/gssd/gssd.c (revision 7b209c2c)
1 /*
2  * CDDL HEADER START
3  *
4  * The contents of this file are subject to the terms of the
5  * Common Development and Distribution License (the "License").
6  * You may not use this file except in compliance with the License.
7  *
8  * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9  * or http://www.opensolaris.org/os/licensing.
10  * See the License for the specific language governing permissions
11  * and limitations under the License.
12  *
13  * When distributing Covered Code, include this CDDL HEADER in each
14  * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15  * If applicable, add the following below this CDDL HEADER, with the
16  * fields enclosed by brackets "[]" replaced with your own identifying
17  * information: Portions Copyright [yyyy] [name of copyright owner]
18  *
19  * CDDL HEADER END
20  */
21 /*
22  * Copyright 2007 Sun Microsystems, Inc.  All rights reserved.
23  * Use is subject to license terms.
24  */
25 
26 #pragma ident	"%Z%%M%	%I%	%E% SMI"
27 
28 /*
29  * Usermode daemon which assists the kernel when handling gssapi calls.
30  * It is gssd that actually implements all gssapi calls.
31  * Some calls, such as gss_sign, are implemented in the kernel on a per
32  * mechanism basis.
33  */
34 
35 #include <stdio.h>
36 #include <rpc/rpc.h>
37 #include <rpc/rpc_com.h>
38 #include <sys/syslog.h>
39 #include <sys/termios.h>
40 #include <unistd.h>
41 #include <sys/utsname.h>
42 #include <sys/systeminfo.h>
43 #include <stdlib.h>
44 #include <stropts.h>
45 #include <fcntl.h>
46 #include <strings.h>
47 #include <signal.h>
48 #include <syslog.h>
49 #include "gssd.h"
50 
51 int gssd_debug = 0;		/* enable debugging printfs */
52 extern void gsscred_set_options(void);
53 
54 void gssprog_1();
55 void gssd_setup(char *);
56 static void usage(void);
57 static void daemonize_start();
58 static void daemonize_ready(unsigned char status);
59 extern int  svc_create_local_service();
60 
61 /* following declarations needed in rpcgen-generated code */
62 int _rpcpmstart = 0;		/* Started by a port monitor ? */
63 int _rpcfdtype;			/* Whether Stream or Datagram ? */
64 int _rpcsvcdirty;		/* Still serving ? */
65 
66 
67 static void
68 /* LINTED */
69 catch_hup(int sig_num)
70 {
71 	sigset_t mask_set;  /* used to set a signal masking set. */
72 	sigset_t old_set;   /* used to store the old mask set.   */
73 
74 	/* re-set the signal handler again to catch_hup, for next time */
75 	(void) signal(SIGHUP, catch_hup);
76 	/* mask any further signals while we're inside the handler. */
77 	(void) sigfillset(&mask_set);
78 	(void) sigprocmask(SIG_SETMASK, &mask_set, &old_set);
79 
80 	gsscred_set_options();
81 
82 	/* let admin know the sighup was caught and conf file re-read */
83 	syslog(LOG_INFO,
84 	    "catch_hup: read gsscred.conf opts");
85 	if (gssd_debug)
86 		(void) fprintf(stderr,
87 			"catch_hup: read gsscred.conf opts");
88 
89 	(void) sigprocmask(SIG_SETMASK, &old_set, NULL);
90 }
91 
92 
93 int
94 main(argc, argv)
95 int argc;
96 char **argv;
97 {
98 	register SVCXPRT *transp;
99 	int maxrecsz = RPC_MAXDATASIZE;
100 	extern int optind;
101 	int c;
102 	char mname[FMNAMESZ + 1];
103 
104 	/* set locale and domain for internationalization */
105 	setlocale(LC_ALL, "");
106 	textdomain(TEXT_DOMAIN);
107 
108 
109 	/*
110 	 * Take special note that "getuid()" is called here.  This call is used
111 	 * rather than app_krb5_user_uid(), to ensure gssd(1M) is running as
112 	 * root.
113 	 */
114 #ifdef DEBUG
115 	(void) setuid(0);		/* DEBUG: set ruid to root */
116 #endif /* DEBUG */
117 	if (getuid()) {
118 		(void) fprintf(stderr,
119 			gettext("[%s] must be run as root\n"), argv[0]);
120 #ifdef DEBUG
121 		(void) fprintf(stderr, gettext(" warning only\n"));
122 #else /* DEBUG */
123 		exit(1);
124 #endif /* DEBUG */
125 	}
126 
127 	gssd_setup(argv[0]);
128 
129 	while ((c = getopt(argc, argv, "d")) != -1)
130 		switch (c) {
131 		    case 'd':
132 			/* turn on debugging */
133 			gssd_debug = 1;
134 			break;
135 		    default:
136 			usage();
137 		}
138 
139 	if (optind != argc) {
140 		usage();
141 	}
142 
143 	gsscred_set_options();
144 	(void) signal(SIGHUP, catch_hup);
145 
146 	/*
147 	 * Started by inetd if name of module just below stream
148 	 * head is either a sockmod or timod.
149 	 */
150 	if (!ioctl(0, I_LOOK, mname) &&
151 		((strcmp(mname, "sockmod") == 0) ||
152 			(strcmp(mname, "timod") == 0))) {
153 
154 		char *netid;
155 		struct netconfig *nconf;
156 
157 		openlog("gssd", LOG_PID, LOG_DAEMON);
158 
159 		if ((netid = getenv("NLSPROVIDER")) ==  NULL) {
160 			netid = "ticotsord";
161 		}
162 
163 		if ((nconf = getnetconfigent(netid)) == NULL) {
164 			syslog(LOG_ERR, gettext("cannot get transport info"));
165 			exit(1);
166 		}
167 
168 		if (strcmp(mname, "sockmod") == 0) {
169 			if (ioctl(0, I_POP, 0) || ioctl(0, I_PUSH, "timod")) {
170 				syslog(LOG_ERR,
171 					gettext("could not get the "
172 						"right module"));
173 				exit(1);
174 			}
175 		}
176 		if (!rpc_control(RPC_SVC_CONNMAXREC_SET, &maxrecsz)) {
177 			syslog(LOG_ERR,
178 				gettext("unable to set RPC max record size"));
179 			exit(1);
180 		}
181 		/* XXX - is nconf even needed here? */
182 		if ((transp = svc_tli_create(0, nconf, NULL, 0, 0)) == NULL) {
183 			syslog(LOG_ERR, gettext("cannot create server handle"));
184 			exit(1);
185 		}
186 
187 		/*
188 		 * We use a NULL nconf because GSSPROG has already been
189 		 * registered with rpcbind.
190 		 */
191 		if (!svc_reg(transp, GSSPROG, GSSVERS, gssprog_1, NULL)) {
192 			syslog(LOG_ERR,
193 				gettext("unable to register "
194 					"(GSSPROG, GSSVERS)"));
195 			exit(1);
196 		}
197 
198 		if (nconf)
199 			freenetconfigent(nconf);
200 	} else {
201 		if (!gssd_debug)
202 			daemonize_start();
203 
204 		openlog("gssd", LOG_PID, LOG_DAEMON);
205 
206 		if (svc_create_local_service(gssprog_1, GSSPROG, GSSVERS,
207 		    "netpath", "gssd") == 0) {
208 			syslog(LOG_ERR, gettext("unable to create service"));
209 			exit(1);
210 		}
211 
212 		/* service created, now the daemon parent can exit */
213 		daemonize_ready(0);
214 	}
215 
216 
217 	if (gssd_debug) {
218 		fprintf(stderr,
219 		    gettext("gssd start: \n"));
220 	}
221 	svc_run();
222 	abort();
223 	/*NOTREACHED*/
224 #ifdef	lint
225 	return (1);
226 #endif
227 }
228 
229 static void
230 usage(void)
231 {
232 	(void) fprintf(stderr, gettext("usage: gssd [-dg]\n"));
233 	exit(1);
234 }
235 
236 
237 /*
238  * Fork, detach from tty, etc...
239  */
240 static int write_pipe_fd = -1;
241 static
242 void
243 daemonize_start()
244 {
245 	int pipe_fds[2];
246 	unsigned char status = 1;
247 
248 	closefrom(0);
249 
250 	/* Open stdin/out/err, chdir, get a pipe */
251 	if (open("/dev/null", O_RDONLY) < 0 ||
252 	    open("/dev/null", O_WRONLY) < 0 || dup(1) < 0 ||
253 	    chdir("/") < 0 || pipe(pipe_fds) < 0)
254 		exit(1);
255 
256 	/* For daemonize_ready() */
257 	write_pipe_fd = pipe_fds[1];
258 
259 	switch (fork()) {
260 	case -1:
261 		exit(1);
262 		/* NOTREACHED */
263 	case 0:
264 		break;
265 	default:
266 		/* Wait for child to be ready befor exiting */
267 		(void) close(pipe_fds[1]);
268 		(void) signal(SIGPIPE, SIG_DFL);
269 		(void) read(pipe_fds[0], &status, sizeof (status));
270 		exit(status);
271 	}
272 
273 	(void) close(pipe_fds[0]);
274 	(void) setsid();
275 }
276 
277 static
278 void
279 daemonize_ready(unsigned char status)
280 {
281 	if (write_pipe_fd == -1)
282 		return;
283 
284 	(void) write(write_pipe_fd, &status, sizeof (status));
285 	(void) close(write_pipe_fd);
286 	write_pipe_fd = -1;
287 }
288 
289 /*ARGSUSED*/
290 int
291 gssprog_1_freeresult(SVCXPRT *transport, xdrproc_t xdr_res, caddr_t res)
292 {
293 	xdr_free(xdr_res, res);
294 	return (1);
295 }
296