1#!/bin/ksh -p 2# 3# CDDL HEADER START 4# 5# The contents of this file are subject to the terms of the 6# Common Development and Distribution License (the "License"). 7# You may not use this file except in compliance with the License. 8# 9# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 10# or http://www.opensolaris.org/os/licensing. 11# See the License for the specific language governing permissions 12# and limitations under the License. 13# 14# When distributing Covered Code, include this CDDL HEADER in each 15# file and include the License file at usr/src/OPENSOLARIS.LICENSE. 16# If applicable, add the following below this CDDL HEADER, with the 17# fields enclosed by brackets "[]" replaced with your own identifying 18# information: Portions Copyright [yyyy] [name of copyright owner] 19# 20# CDDL HEADER END 21# 22# Copyright 2009 Sun Microsystems, Inc. All rights reserved. 23# Use is subject to license terms. 24# 25 26. /usr/lib/brand/solaris10/common.ksh 27 28m_usage=$(gettext "solaris10 brand usage:\n\tinstall -u | -p [-v | -s] -a archive | -d directory.\n\tThe -a archive option specifies an archive name which can be a flar,\n\ttar, pax or cpio archive.\n\tThe -d directory option specifies an existing directory.\n\tThe -u option unconfigures the zone, -p preserves the configuration.") 29 30no_install=$(gettext "Could not create install directory '%s'") 31 32product_vers=$(gettext " Product: %s") 33install_vers=$(gettext " Installer: %s") 34install_zone=$(gettext " Zone: %s") 35install_path=$(gettext " Path: %s") 36installing=$(gettext " Installing: This may take several minutes...") 37no_installing=$(gettext " Installing: Using pre-existing data in zonepath") 38install_prog=$(gettext " Installing: %s") 39 40install_fail=$(gettext " Result: *** Installation FAILED ***") 41install_log=$(gettext " Log File: %s") 42 43install_good=$(gettext " Result: Installation completed successfully.") 44 45unpack_done=$(gettext " Unpack result: %d") 46 47sanity_ok=$(gettext " Sanity Check: Passed. Looks like a Solaris 10 system.") 48sanity_fail=$(gettext " Sanity Check: FAILED (see log for details).") 49 50 51p2ving=$(gettext "Postprocessing: This may take a while...") 52p2v_prog=$(gettext " Postprocess: ") 53p2v_done=$(gettext " Result: Postprocessing complete.") 54p2v_fail=$(gettext " Result: Postprocessing failed.") 55 56root_full=$(gettext "Zonepath root %s exists and contains data; remove or move aside prior to install.") 57 58media_missing=\ 59$(gettext "you must specify an installation source using '-a', '-d' or '-r'.\n%s") 60 61cfgchoice_missing=\ 62$(gettext "you must specify -u (sys-unconfig) or -p (preserve identity).\n%s") 63 64mount_failed=$(gettext "ERROR: zonecfg(1M) 'fs' mount failed") 65 66not_flar=$(gettext "Input is not a flash archive") 67bad_flar=$(gettext "Flash archive is a corrupt") 68unknown_archiver=$(gettext "Archiver %s is not supported") 69 70# Clean up on interrupt 71trap_cleanup() 72{ 73 msg=$(gettext "Installation cancelled due to interrupt.") 74 log "$msg" 75 76 # umount any mounted file systems 77 umnt_fs 78 79 trap_exit 80} 81 82# If the install failed then clean up the ZFS datasets we created. 83trap_exit() 84{ 85 if (( $EXIT_CODE != $ZONE_SUBPROC_OK )); then 86 /usr/lib/brand/solaris10/uninstall $ZONENAME $ZONEPATH -F 87 fi 88 89 exit $EXIT_CODE 90} 91 92# 93# The main body of the script starts here. 94# 95# This script should never be called directly by a user but rather should 96# only be called by zoneadm to install a s10 system image into a zone. 97# 98 99# 100# Exit code to return if install is interrupted or exit code is otherwise 101# unspecified. 102# 103EXIT_CODE=$ZONE_SUBPROC_USAGE 104 105trap trap_cleanup INT 106trap trap_exit EXIT 107 108# If we weren't passed at least two arguments, exit now. 109(( $# < 2 )) && exit $ZONE_SUBPROC_USAGE 110 111ZONENAME="$1" 112ZONEPATH="$2" 113# XXX shared/common script currently uses lower case zonename & zonepath 114zonename="$ZONENAME" 115zonepath="$ZONEPATH" 116 117ZONEROOT="$ZONEPATH/root" 118logdir="$ZONEROOT/var/log" 119 120shift; shift # remove ZONENAME and ZONEPATH from arguments array 121 122unset inst_type 123unset msg 124unset silent_mode 125unset OPT_V 126 127# 128# It is worth noting here that we require the end user to pick one of 129# -u (sys-unconfig) or -p (preserve config). This is because we can't 130# really know in advance which option makes a better default. Forcing 131# the user to pick one or the other means that they will consider their 132# choice and hopefully not be surprised or disappointed with the result. 133# 134unset unconfig_zone 135unset preserve_zone 136unset SANITY_SKIP 137 138while getopts "a:d:Fpr:suv" opt 139do 140 case "$opt" in 141 a) 142 if [[ -n "$inst_type" ]]; then 143 fatal "$incompat_options" "$m_usage" 144 fi 145 inst_type="archive" 146 install_media="$OPTARG" 147 ;; 148 d) 149 if [[ -n "$inst_type" ]]; then 150 fatal "$incompat_options" "$m_usage" 151 fi 152 inst_type="directory" 153 install_media="$OPTARG" 154 ;; 155 F) SANITY_SKIP=1;; 156 p) preserve_zone="-p";; 157 r) 158 if [[ -n "$inst_type" ]]; then 159 fatal "$incompat_options" "$m_usage" 160 fi 161 inst_type="stdin" 162 install_media="$OPTARG" 163 ;; 164 s) silent_mode=1;; 165 u) unconfig_zone="-u";; 166 v) OPT_V="-v";; 167 *) printf "$m_usage\n" 168 exit $ZONE_SUBPROC_USAGE;; 169 esac 170done 171shift OPTIND-1 172 173# The install can't be both verbose AND silent... 174if [[ -n $silent_mode && -n $OPT_V ]]; then 175 fatal "$incompat_options" "$m_usage" 176fi 177 178if [[ -z $install_media ]]; then 179 fatal "$media_missing" "$m_usage" 180fi 181 182# The install can't both preserve and unconfigure 183if [[ -n $unconfig_zone && -n $preserve_zone ]]; then 184 fatal "$incompat_options" "$m_usage" 185fi 186 187# Must pick one or the other. 188if [[ -z $unconfig_zone && -z $preserve_zone ]]; then 189 fatal "$cfgchoice_missing" "$m_usage" 190fi 191 192LOGFILE=$(/usr/bin/mktemp -t -p /var/tmp $ZONENAME.install_log.XXXXXX) 193if [[ -z "$LOGFILE" ]]; then 194 fatal "$e_tmpfile" 195fi 196zone_logfile="${logdir}/$ZONENAME.install$$.log" 197exec 2>>"$LOGFILE" 198log "$install_log" "$LOGFILE" 199 200vlog "Starting pre-installation tasks." 201 202# 203# From here on out, an unspecified exit or interrupt should exit with 204# ZONE_SUBPROC_NOTCOMPLETE, meaning a user will need to do an uninstall before 205# attempting another install, as we've modified the directories we were going 206# to install to in some way. 207# 208EXIT_CODE=$ZONE_SUBPROC_NOTCOMPLETE 209 210create_active_ds 211 212vlog "Installation started for zone \"$ZONENAME\"" 213install_image "$inst_type" "$install_media" 214 215log "$p2ving" 216vlog "running: p2v $OPT_V $unconfig_zone $ZONENAME $ZONEPATH" 217 218# 219# Run p2v. 220# 221# Getting the output to the right places is a little tricky because what 222# we want is for p2v to output in the same way the installer does: verbose 223# messages to the log file always, and verbose messages printed to the 224# user if the user passes -v. This rules out simple redirection. And 225# we can't use tee or other tricks because they cause us to lose the 226# return value from the p2v script due to the way shell pipelines work. 227# 228# The simplest way to do this seems to be to hand off the management of 229# the log file to the p2v script. So we run p2v with -l to tell it where 230# to find the log file and then reopen the log (O_APPEND) when p2v is done. 231# 232/usr/lib/brand/solaris10/p2v -l "$LOGFILE" -m "$p2v_prog" \ 233 $OPT_V $unconfig_zone $ZONENAME $ZONEPATH 234p2v_result=$? 235exec 2>>$LOGFILE 236 237if (( $p2v_result == 0 )); then 238 vlog "$p2v_done" 239else 240 log "$p2v_fail" 241 log "" 242 log "$install_fail" 243 log "$install_log" "$LOGFILE" 244 exit $ZONE_SUBPROC_FATAL 245fi 246 247log "" 248log "$install_good" "$ZONENAME" 249 250safe_dir /var 251safe_dir /var/log 252safe_copy $LOGFILE $zone_logfile 253 254log "$install_log" "$zone_logfile" 255rm -f $LOGFILE 256 257# This needs to be set since the exit trap handler is going run. 258EXIT_CODE=$ZONE_SUBPROC_OK 259 260exit $ZONE_SUBPROC_OK 261