1 /*
2  * CDDL HEADER START
3  *
4  * The contents of this file are subject to the terms of the
5  * Common Development and Distribution License (the "License").
6  * You may not use this file except in compliance with the License.
7  *
8  * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9  * or http://www.opensolaris.org/os/licensing.
10  * See the License for the specific language governing permissions
11  * and limitations under the License.
12  *
13  * When distributing Covered Code, include this CDDL HEADER in each
14  * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15  * If applicable, add the following below this CDDL HEADER, with the
16  * fields enclosed by brackets "[]" replaced with your own identifying
17  * information: Portions Copyright [yyyy] [name of copyright owner]
18  *
19  * CDDL HEADER END
20  */
21 /*
22  * Copyright 2008 Sun Microsystems, Inc.  All rights reserved.
23  * Use is subject to license terms.
24  */
25 
26 #ifndef _NPI_RX_RD64_H
27 #define	_NPI_RX_RD64_H
28 
29 #pragma ident	"%Z%%M%	%I%	%E% SMI"
30 
31 #ifdef	__cplusplus
32 extern "C" {
33 #endif
34 
35 #include <npi.h>
36 
37 /*
38  * RXDMA_REG_READ64
39  *
40  *	Read a 64-bit value from a DMC register.
41  *
42  * This is the old, rather convoluted,  macro:
43  *
44  * #define RXDMA_REG_READ64(handle, reg, channel, data_p) {	\
45  *	NXGE_REG_RD64(handle, (NXGE_RXDMA_OFFSET(reg, \
46  *	handle.is_vraddr, channel)), (data_p))
47  *
48  * There are 4 versions of NXGE_REG_RD64:
49  * -------------------------------------------------------------
50  * #if defined(REG_TRACE)
51  * #define	NXGE_REG_RD64(handle, offset, val_p) {	\
52  * 	*(val_p) = NXGE_NPI_PIO_READ64(handle, offset);			\
53  * 	npi_rtrace_update(handle, B_FALSE, &npi_rtracebuf, (uint32_t)offset, \
54  * 			(uint64_t)(*(val_p)));				\
55  * }
56  * #elif defined(REG_SHOW)
57  * #define	NXGE_REG_RD64(handle, offset, val_p) {\
58  * 	*(val_p) = NXGE_NPI_PIO_READ64(handle, offset);\
59  * 	rt_show_reg(0xbadbad, B_FALSE, (uint32_t)offset, (uint64_t)(*(val_p)));\
60  * }
61  * #elif defined(AXIS_DEBUG) && !defined(LEGION)
62  * #define	NXGE_REG_RD64(handle, offset, val_p) {\
63  * 	int	n;				\
64  * 	for (n = 0; n < AXIS_WAIT_LOOP; n++) {	\
65  * 		*(val_p) = 0;		\
66  * 		*(val_p) = NXGE_NPI_PIO_READ64(handle, offset);\
67  * 		if (*(val_p) != (~0)) { \
68  * 			break; \
69  * 		}	\
70  * 		drv_usecwait(AXIS_WAIT_PER_LOOP); \
71  * 		if (n < 20) { \
72  * 			cmn_err(CE_WARN, "NXGE_REG_RD64: loop %d " \
73  * 			"REG 0x%x(0x%llx)", \
74  * 			n, offset, *val_p);\
75  * 		}	\
76  * 	} \
77  * 	if (n >= AXIS_WAIT_LOOP) {	\
78  * 		cmn_err(CE_WARN, "(FATAL)NXGE_REG_RD64 on offset 0x%x " \
79  * 			"with -1!!!", offset); \
80  * 	}	\
81  * }
82  * #else
83  * #define	NXGE_REG_RD64(handle, offset, val_p) {\
84  * 	*(val_p) = NXGE_NPI_PIO_READ64(handle, offset);\
85  * }
86  * #endif
87  *
88  * There are 2 versions of NXGE_NPI_PIO_READ64:
89  * -------------------------------------------------------------
90  * #if defined(__i386)
91  * #define	NXGE_NPI_PIO_READ64(npi_handle, offset)		\
92  * 	(ddi_get64(NPI_REGH(npi_handle),		\
93  * 	(uint64_t *)(NPI_REGP(npi_handle) + (uint32_t)offset)))
94  * #else
95  * #define	NXGE_NPI_PIO_READ64(npi_handle, offset)		\
96  * 	(ddi_get64(NPI_REGH(npi_handle),		\
97  * 	(uint64_t *)(NPI_REGP(npi_handle) + offset)))
98  * #endif
99  *
100  * -------------------------------------------------------------
101  * #define	NPI_REGH(npi_handle)		(npi_handle.regh)
102  * #define	NPI_REGP(npi_handle)		(npi_handle.regp)
103  *
104  * Now let's tackle NXGE_RXDMA_OFFSET
105  * -------------------------------------------------------------
106  * #define	NXGE_RXDMA_OFFSET(x, v, channel) (x + \
107  * 		(!v ? DMC_OFFSET(channel) : \
108  *			RDMC_PIOVADDR_OFFSET(channel)))
109  *
110  * -------------------------------------------------------------
111  * #define	DMC_OFFSET(channel)	(DMA_CSR_SIZE * channel)
112  *
113  * #define	TDMC_PIOVADDR_OFFSET(channel)	(2 * DMA_CSR_SIZE * channel)
114  * -------------------------------------------------------------
115  * #define	RDMC_PIOVADDR_OFFSET(channel) \
116  *			(TDMC_OFFSET(channel) + DMA_CSR_SIZE)
117  * -------------------------------------------------------------
118  * #define	DMA_CSR_SIZE		512
119  *
120  * #define TDMC_OFFSET(channel)	(TX_RNG_CFIG + DMA_CSR_SIZE * channel)
121  * #define TX_RNG_CFIG		(DMC + 0x40000)
122  * -------------------------------------------------------------
123  * This definition is clearly wrong!  I think this was intended:
124  *
125  * #define	RDMC_PIOVADDR_OFFSET(channel) \
126  *			(TDMC_PIOVADDR__OFFSET(channel) + DMA_CSR_SIZE)
127  * -------------------------------------------------------------
128  *
129  * Finally, we have the full macro:
130  * -------------------------------------------------------------
131  * #define RXDMA_REG_READ64(handle, reg, channel, data_p) {	\
132  *	NXGE_REG_RD64(handle, (NXGE_RXDMA_OFFSET(reg, \
133  *	handle.is_vraddr, channel)), (data_p))
134  *
135  * *data_p = ddi_get64(handle.regh, (uint64_t*)(handle.regp +
136  *		((0x600000+0x00000) +
137  *		(!handle.is_vraddr ?
138  *			(512 * channel) :
139  *			0x600000 + 0x40000 + (512 * channel) + 512)));
140  */
141 
142 static void RXDMA_REG_READ64(npi_handle_t, uint64_t, int, uint64_t *);
143 #pragma inline(RXDMA_REG_READ64)
144 
145 /*
146  * RXDMA_REG_READ64
147  *
148  *	Read a 64-bit value from a DMC register.
149  *
150  * Arguments:
151  * 	handle	The NPI handle to use.
152  * 	offset	The offset into the DMA CSR (the register).
153  * 	channel	The channel, which is used as a multiplicand.
154  * 	value	Where to put the 64-bit value to be read.
155  *
156  * Notes:
157  *	If handle.regp is a virtual address (the address of a VR),
158  *	we have to subtract the value DMC right off the bat.  DMC
159  *	is defined as 0x600000, which works in a non-virtual address
160  *	space, but not in a VR.  In a VR, a DMA CSR's space begins
161  *	at zero (0).  So, since every call to RXMDA_REG_READ64 uses
162  *	a register macro which adds in DMC, we have to subtract it.
163  *
164  *	The rest of it is pretty straighforward.  In a VR, a channel is
165  *	logical, not absolute; and every DMA CSR is 512 bytes big;
166  *	furthermore, a subpage of a VR is always ordered with the
167  *	transmit CSRs first, followed by the receive CSRs.  That is,
168  *	a 512 byte space of Tx CSRs, followed by a 512 byte space of
169  *	Rx CSRs.  Hence this calculation:
170  *
171  *	offset += ((channel << 1) + 1) << DMA_CSR_SLL;
172  *
173  *	Here's an example:
174  *
175  *	RXDMA_REG_READ64(handle, RX_DMA_CTL_STAT_REG, channel, value);
176  *	Let's say channel is 3
177  *	#define	RX_DMA_CTL_STAT_REG	(DMC + 0x00070)
178  *	offset = 0x600070
179  *	offset &= 0xff = 0x70
180  *	offset += ((3 << 1) + 1) << 9
181  *	3 << 1 = 6
182  *	6 + 1 = 7
183  *	7 << 9 = 0xe00
184  *	offset += 0xe00 = 0xe70
185  *
186  *	Therefore, our register's (virtual) PIO address is 0xe70.
187  *
188  *	cf. Table 10-6 on page 181 of the Neptune PRM, v 1.4:
189  *
190  *	E00 - FFF CSRs for bound logical receive DMA channel 3.
191  *
192  *	In a non-virtual environment, you simply multiply the absolute
193  *	channel number by 512 bytes, and get the correct offset to
194  *	the register you're looking for.  That is, the RX_DMA_CTL_STAT CSR,
195  *	is, as are all of these registers, in a table where each channel
196  *	is offset 512 bytes from the previous channel (count 16 step 512).
197  *
198  *	offset += (channel << DMA_CSR_SLL);	// channel<<9 = channel*512
199  *
200  *	Here's an example:
201  *
202  *	RXDMA_REG_READ64(handle, RX_DMA_CTL_STAT_REG, channel, value);
203  *	Let's say channel is 3
204  *	#define	RX_DMA_CTL_STAT_REG	(DMC + 0x00070)
205  *	offset = 0x600070
206  *	offset += (3 << 9)
207  *	3 << 9 = 0x600
208  *	offset += 0x600 = 0x600670
209  *
210  *	Therefore, our register's PIO address is 0x600670.
211  *
212  *	cf. Table 12-42 on page 234 of the Neptune PRM, v 1.4:
213  *	RX_DMA_CTL_STAT (DMC + [0x]00070) (count 16 step [0x]200)
214  *
215  * Context:
216  *	Guest domain
217  *
218  */
219 extern const char *nxge_rx2str(int);
220 
221 void
222 RXDMA_REG_READ64(
223 	npi_handle_t handle,
224 	uint64_t offset,
225 	int channel,
226 	uint64_t *value)
227 {
228 #if defined(NPI_REG_TRACE)
229 	const char *name = nxge_rx2str((int)offset);
230 #endif
231 	if (handle.is_vraddr) {
232 		offset &= DMA_CSR_MASK;
233 		offset += (((channel << 1) + 1) << DMA_CSR_SLL);
234 	} else {
235 		offset += (channel << DMA_CSR_SLL);
236 	}
237 
238 #if defined(__i386)
239 	*value = ddi_get64(handle.regh,
240 	    (uint64_t *)(handle.regp + (uint32_t)offset));
241 #else
242 	*value = ddi_get64(handle.regh, (uint64_t *)(handle.regp + offset));
243 #endif
244 
245 #if defined(NPI_REG_TRACE)
246 	npi_trace_update(handle, B_FALSE, &npi_rtracebuf,
247 	    name, (uint32_t)offset, *value);
248 #elif defined(REG_SHOW)
249 	/*
250 	 * Since we don't have a valid RTBUF index to show, send 0xBADBAD.
251 	 */
252 	rt_show_reg(0xbadbad, B_FALSE, (uint32_t)offset, *value);
253 #endif
254 }
255 
256 #ifdef	__cplusplus
257 }
258 #endif
259 
260 #endif	/* _NPI_RX_RD64_H */
261