xref: /illumos-gate/usr/src/uts/common/io/usb/usba/usbai.c (revision 19397407)
1 /*
2  * CDDL HEADER START
3  *
4  * The contents of this file are subject to the terms of the
5  * Common Development and Distribution License (the "License").
6  * You may not use this file except in compliance with the License.
7  *
8  * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9  * or http://www.opensolaris.org/os/licensing.
10  * See the License for the specific language governing permissions
11  * and limitations under the License.
12  *
13  * When distributing Covered Code, include this CDDL HEADER in each
14  * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15  * If applicable, add the following below this CDDL HEADER, with the
16  * fields enclosed by brackets "[]" replaced with your own identifying
17  * information: Portions Copyright [yyyy] [name of copyright owner]
18  *
19  * CDDL HEADER END
20  *
21  * Copyright 2008 Sun Microsystems, Inc.  All rights reserved.
22  * Use is subject to license terms.
23  */
24 
25 
26 /*
27  * USBA: Solaris USB Architecture support
28  *
29  * all functions exposed to client drivers  have prefix usb_ while all USBA
30  * internal functions or functions exposed to HCD or hubd only have prefix
31  * usba_
32  *
33  * this file contains initializations, logging/tracing support and PM
34  * support
35  */
36 #define	USBA_FRAMEWORK
37 #include <sys/varargs.h>
38 #include <sys/strsun.h>
39 #include <sys/usb/usba/usba_impl.h>
40 #include <sys/usb/usba/hcdi_impl.h>
41 #include <sys/usb/usba/usba10.h>
42 
43 /*
44  * print buffer protected by mutex for debug stuff. the mutex also
45  * ensures serializing debug messages
46  */
47 static kmutex_t	usba_print_mutex;
48 static char usba_print_buf[USBA_PRINT_BUF_LEN];
49 kmutex_t usbai_mutex;
50 
51 /*
52  * debug stuff
53  */
54 usb_log_handle_t	usbai_log_handle;
55 uint_t			usbai_errlevel = USB_LOG_L4;
56 uint_t			usbai_errmask = (uint_t)-1;
57 
58 #define	USBA_DEBUG_SIZE_EXTRA_ALLOC	8
59 #ifdef	DEBUG
60 #define	USBA_DEBUG_BUF_SIZE \
61 			(0x40000 -  USBA_DEBUG_SIZE_EXTRA_ALLOC)
62 #else
63 #define	USBA_DEBUG_BUF_SIZE \
64 			(0x4000 -  USBA_DEBUG_SIZE_EXTRA_ALLOC)
65 #endif	/* DEBUG */
66 
67 #define	USBA_POWER_STR_SIZE		40
68 
69 int	usba_suppress_dprintf;		/* Suppress debug printing */
70 int	usba_clear_debug_buf_flag;	/* clear debug buf */
71 int	usba_buffer_dprintf = 1;	/* Use a debug print buffer */
72 int	usba_timestamp_dprintf = 0;	/* get time stamps in trace */
73 int	usba_debug_buf_size = USBA_DEBUG_BUF_SIZE;	/* Size of debug buf */
74 int	usba_debug_chatty;		/* L1 msg on console */
75 
76 static char *usba_debug_buf = NULL;	/* The debug buf */
77 static char *usba_buf_sptr, *usba_buf_eptr;
78 static hrtime_t usba_last_timestamp;	/* last time stamp in trace */
79 
80 /*
81  * Set to 1 to enable PM.
82  */
83 int usb_force_enable_pm = 0;
84 
85 
86 /* USBA framework initializations */
87 void
88 usba_usbai_initialization()
89 {
90 	usbai_log_handle = usb_alloc_log_hdl(NULL, "usbai", &usbai_errlevel,
91 	    &usbai_errmask, NULL, 0);
92 
93 	USB_DPRINTF_L4(DPRINT_MASK_USBAI, usbai_log_handle,
94 	    "usba_usbai_initialization");
95 
96 	mutex_init(&usba_print_mutex, NULL, MUTEX_DRIVER, NULL);
97 	mutex_init(&usbai_mutex, NULL, MUTEX_DRIVER, NULL);
98 }
99 
100 
101 /* USBA framework destroys */
102 void
103 usba_usbai_destroy()
104 {
105 	USB_DPRINTF_L4(DPRINT_MASK_USBAI, usbai_log_handle,
106 	    "usba_usbai_destroy");
107 
108 	mutex_destroy(&usba_print_mutex);
109 	mutex_destroy(&usbai_mutex);
110 	if (usba_debug_buf) {
111 		kmem_free(usba_debug_buf,
112 		    usba_debug_buf_size + USBA_DEBUG_SIZE_EXTRA_ALLOC);
113 	}
114 
115 	usb_free_log_hdl(usbai_log_handle);
116 }
117 
118 
119 /*
120  * debug, log, and console message handling
121  */
122 usb_log_handle_t
123 usb_alloc_log_hdl(dev_info_t *dip, char *name,
124 	uint_t *errlevel, uint_t *mask, uint_t *instance_filter,
125 	usb_flags_t flags)
126 {
127 	usba_log_handle_impl_t	*hdl;
128 
129 	USBA_CHECK_CONTEXT();
130 	hdl = kmem_zalloc(sizeof (*hdl), KM_SLEEP);
131 
132 	hdl->lh_dip = dip;
133 	if (dip && (name == NULL)) {
134 		hdl->lh_name = (char *)ddi_driver_name(dip);
135 	} else {
136 		hdl->lh_name = name;
137 	}
138 	hdl->lh_errlevel = errlevel;
139 	hdl->lh_mask = mask;
140 	hdl->lh_instance_filter = instance_filter;
141 	hdl->lh_flags = flags;
142 
143 #ifdef __lock_lint
144 	(void) usb_alloc_log_handle(dip, name, errlevel, mask,
145 	    instance_filter, 0, flags);
146 	usb_free_log_handle(NULL);
147 #endif
148 
149 	return ((usb_log_handle_t)hdl);
150 }
151 
152 
153 /*ARGSUSED*/
154 usb_log_handle_t
155 usb_alloc_log_handle(dev_info_t *dip, char *name,
156 	uint_t *errlevel, uint_t *mask, uint_t *instance_filter,
157 	uint_t reserved, usb_flags_t flags)
158 {
159 	return (usb_alloc_log_hdl(dip, name, errlevel, mask,
160 	    instance_filter, flags));
161 }
162 
163 void
164 usb_free_log_handle(usb_log_handle_t handle)
165 {
166 	if (handle) {
167 		kmem_free(handle, sizeof (usba_log_handle_impl_t));
168 	}
169 }
170 
171 void
172 usb_free_log_hdl(usb_log_handle_t handle)
173 {
174 	if (handle) {
175 		kmem_free(handle, sizeof (usba_log_handle_impl_t));
176 	}
177 }
178 
179 
180 static void
181 usba_clear_dprint_buf()
182 {
183 	if (usba_debug_buf) {
184 		usba_buf_sptr = usba_debug_buf;
185 		usba_buf_eptr = usba_debug_buf + usba_debug_buf_size;
186 		bzero(usba_debug_buf, usba_debug_buf_size +
187 		    USBA_DEBUG_SIZE_EXTRA_ALLOC);
188 	}
189 }
190 
191 
192 #ifdef DEBUG
193 char *
194 usba_dbuf_tail(uint_t lines)
195 {
196 	int	count;
197 	char	*r = NULL;
198 
199 	mutex_enter(&usba_print_mutex);
200 	if (usba_debug_buf) {
201 		count = 0;
202 		r = usba_buf_sptr;
203 		while ((count < lines) && (r > usba_debug_buf)) {
204 			if (*r == '\n') {
205 				count++;
206 			}
207 			r--;
208 		}
209 	}
210 	mutex_exit(&usba_print_mutex);
211 
212 	return (r);
213 }
214 #endif	/* DEBUG */
215 
216 
217 static void usb_vprintf(dev_info_t *, int, char *, char *, va_list)
218 	__KVPRINTFLIKE(4);
219 
220 static void
221 usb_vprintf(dev_info_t *dip, int level, char *label, char *fmt, va_list ap)
222 {
223 	size_t len;
224 	int instance;
225 	char driver_name[USBA_DRVNAME_LEN];
226 	char *msg_ptr;
227 
228 	if (usba_suppress_dprintf) {
229 
230 		return;
231 	}
232 
233 	*driver_name = '\0';
234 	mutex_enter(&usba_print_mutex);
235 
236 	/*
237 	 * Check if we have a valid buf size?
238 	 * Suppress logging to usb_buffer if so.
239 	 */
240 	if (usba_debug_buf_size <= 0) {
241 
242 		usba_buffer_dprintf = 0;
243 	}
244 
245 	/*
246 	 * if there is label and dip, use <driver name><instance>:
247 	 * otherwise just use the label
248 	 */
249 	if (dip) {
250 		instance = ddi_get_instance(dip);
251 		(void) snprintf(driver_name, USBA_DRVNAME_LEN,
252 		    "%s%d", ddi_driver_name(dip), instance);
253 	}
254 
255 	if (label == (char *)NULL) {
256 		len = snprintf(usba_print_buf, USBA_PRINT_BUF_LEN, "\t");
257 	} else if (usba_timestamp_dprintf) {
258 		hrtime_t t = gethrtime();
259 		hrtime_t elapsed = (t - usba_last_timestamp)/1000;
260 		usba_last_timestamp = t;
261 
262 		if (dip) {
263 
264 			len = snprintf(usba_print_buf, USBA_PRINT_BUF_LEN,
265 			    "+%lld->%p: %s%d: ", elapsed,
266 			    (void *)curthread, label, instance);
267 		} else {
268 			len = snprintf(usba_print_buf, USBA_PRINT_BUF_LEN,
269 			    "+%lld->%p: %s: ", elapsed,
270 			    (void *)curthread, label);
271 		}
272 	} else {
273 		if (dip) {
274 			len = snprintf(usba_print_buf, USBA_PRINT_BUF_LEN,
275 			    "%s%d:\t", label, instance);
276 		} else {
277 			len = snprintf(usba_print_buf, USBA_PRINT_BUF_LEN,
278 			    "%s:\t", label);
279 		}
280 	}
281 
282 
283 	msg_ptr = usba_print_buf + len;
284 	(void) vsnprintf(msg_ptr, USBA_PRINT_BUF_LEN - len - 2, fmt, ap);
285 
286 	len = min(strlen(usba_print_buf), USBA_PRINT_BUF_LEN - 2);
287 	usba_print_buf[len++] = '\n';
288 	usba_print_buf[len] = '\0';
289 
290 	/*
291 	 * stuff the message in the debug buf
292 	 */
293 	if (usba_buffer_dprintf) {
294 		if (usba_debug_buf == NULL) {
295 			usba_debug_buf = kmem_alloc(
296 			    usba_debug_buf_size + USBA_DEBUG_SIZE_EXTRA_ALLOC,
297 			    KM_SLEEP);
298 			usba_clear_dprint_buf();
299 		} else if (usba_clear_debug_buf_flag) {
300 			usba_clear_dprint_buf();
301 			usba_clear_debug_buf_flag = 0;
302 		}
303 
304 		/*
305 		 * overwrite >>>> that might be over the end of the
306 		 * the buffer
307 		 */
308 		*(usba_debug_buf + usba_debug_buf_size) = '\0';
309 
310 		if ((usba_buf_sptr + len) > usba_buf_eptr) {
311 			size_t left = _PTRDIFF(usba_buf_eptr, usba_buf_sptr);
312 
313 			bcopy(usba_print_buf, usba_buf_sptr, left);
314 			bcopy((caddr_t)usba_print_buf + left,
315 			    usba_debug_buf, len - left);
316 			usba_buf_sptr = usba_debug_buf + len - left;
317 		} else {
318 			bcopy(usba_print_buf, usba_buf_sptr, len);
319 			usba_buf_sptr += len;
320 		}
321 		/* add marker */
322 		(void) sprintf(usba_buf_sptr, ">>>>");
323 	}
324 
325 	/*
326 	 * L4-L2 message may go to the log buf if not logged in usba_debug_buf
327 	 * L1 messages will go to the log buf in non-debug kernels and
328 	 * to console and log buf in debug kernels if usba_debug_chatty
329 	 * has been set
330 	 * L0 messages are warnings and will go to console and log buf and
331 	 * include the pathname, if available
332 	 */
333 
334 	switch (level) {
335 	case USB_LOG_L4:
336 	case USB_LOG_L3:
337 	case USB_LOG_L2:
338 		if (!usba_buffer_dprintf) {
339 			cmn_err(CE_CONT, "^%s", usba_print_buf);
340 		}
341 		break;
342 	case USB_LOG_L1:
343 		if (dip) {
344 			char *pathname = kmem_alloc(MAXPATHLEN, KM_NOSLEEP);
345 			if (pathname) {
346 				cmn_err(CE_CONT,
347 				    usba_debug_chatty ?
348 				    "%s (%s): %s" : "?%s (%s): %s",
349 				    ddi_pathname(dip, pathname),
350 				    driver_name, msg_ptr);
351 				kmem_free(pathname, MAXPATHLEN);
352 			} else {
353 				cmn_err(CE_CONT,
354 				    usba_debug_chatty ?
355 				    "%s" : "?%s", usba_print_buf);
356 			}
357 		} else {
358 			cmn_err(CE_CONT,
359 			    usba_debug_chatty ? "%s" : "?%s",
360 			    usba_print_buf);
361 		}
362 		break;
363 	case USB_LOG_L0:
364 		/* Strip the "\n" added earlier */
365 		if (usba_print_buf[len - 1] == '\n') {
366 			usba_print_buf[len - 1] = '\0';
367 		}
368 		if (msg_ptr[len - 1] == '\n') {
369 			msg_ptr[len - 1] = '\0';
370 		}
371 		if (dip) {
372 			char *pathname = kmem_alloc(MAXPATHLEN, KM_NOSLEEP);
373 			if (pathname) {
374 				cmn_err(CE_WARN, "%s (%s): %s",
375 				    ddi_pathname(dip, pathname),
376 				    driver_name, msg_ptr);
377 				kmem_free(pathname, MAXPATHLEN);
378 			} else {
379 				cmn_err(CE_WARN, usba_print_buf);
380 			}
381 		} else {
382 			cmn_err(CE_WARN, usba_print_buf);
383 		}
384 		break;
385 	}
386 
387 	mutex_exit(&usba_print_mutex);
388 }
389 
390 int
391 usba_vlog(usb_log_handle_t, uint_t, uint_t, char *, va_list)
392 	__KVPRINTFLIKE(4);
393 
394 /* When usba10_calls.c goes away, this function can be made static again. */
395 int
396 usba_vlog(usb_log_handle_t handle, uint_t level, uint_t mask,
397     char *fmt, va_list ap)
398 {
399 	usba_log_handle_impl_t *hdl = (usba_log_handle_impl_t *)handle;
400 	char *label;
401 	uint_t hdl_errlevel, hdl_mask, hdl_instance_filter;
402 
403 	/* if there is no handle, use usba as label */
404 	if (hdl == NULL) {
405 		usb_vprintf(NULL, level, "usba", fmt, ap);
406 
407 		return (USB_SUCCESS);
408 	}
409 
410 	/* look up the filters and set defaults */
411 	if (hdl->lh_errlevel) {
412 		hdl_errlevel = *(hdl->lh_errlevel);
413 	} else {
414 		hdl_errlevel = 0;
415 	}
416 
417 	if (hdl->lh_mask) {
418 		hdl_mask = *(hdl->lh_mask);
419 	} else {
420 		hdl_mask = (uint_t)-1;
421 	}
422 
423 	if (hdl->lh_instance_filter) {
424 		hdl_instance_filter = *(hdl->lh_instance_filter);
425 	} else {
426 		hdl_instance_filter = (uint_t)-1;
427 	}
428 
429 	/* if threshold is lower or mask doesn't match, we are done */
430 	if ((level > hdl_errlevel) || ((mask & hdl_mask) == 0)) {
431 
432 		return (USB_FAILURE);
433 	}
434 
435 	/*
436 	 * if we have a dip, and it is not a warning, check
437 	 * the instance number
438 	 */
439 	if (hdl->lh_dip && (level > USB_LOG_L0)) {
440 		if ((hdl_instance_filter != (uint_t)-1) &&
441 		    (ddi_get_instance(hdl->lh_dip) != hdl_instance_filter)) {
442 
443 			return (USB_FAILURE);
444 		}
445 	}
446 
447 	label = hdl->lh_name;
448 
449 	usb_vprintf(hdl->lh_dip, level, label, fmt, ap);
450 
451 	return (USB_SUCCESS);
452 }
453 
454 
455 void
456 usb_dprintf4(uint_t mask, usb_log_handle_t handle, char *fmt, ...)
457 {
458 	va_list ap;
459 
460 	va_start(ap, fmt);
461 	(void) usba_vlog(handle, USB_LOG_L4, mask, fmt, ap);
462 	va_end(ap);
463 }
464 
465 
466 void
467 usb_dprintf3(uint_t mask, usb_log_handle_t handle, char *fmt, ...)
468 {
469 	va_list ap;
470 
471 	va_start(ap, fmt);
472 	(void) usba_vlog(handle, USB_LOG_L3, mask, fmt, ap);
473 	va_end(ap);
474 }
475 
476 
477 void
478 usb_dprintf2(uint_t mask, usb_log_handle_t handle, char *fmt, ...)
479 {
480 	va_list ap;
481 
482 	va_start(ap, fmt);
483 	(void) usba_vlog(handle, USB_LOG_L2, mask, fmt, ap);
484 	va_end(ap);
485 }
486 
487 
488 void
489 usb_dprintf1(uint_t mask, usb_log_handle_t handle, char *fmt, ...)
490 {
491 	va_list ap;
492 
493 	va_start(ap, fmt);
494 	(void) usba_vlog(handle, USB_LOG_L1, mask, fmt, ap);
495 	va_end(ap);
496 }
497 
498 
499 void
500 usb_dprintf0(uint_t mask, usb_log_handle_t handle, char *fmt, ...)
501 {
502 	va_list ap;
503 
504 	va_start(ap, fmt);
505 	(void) usba_vlog(handle, USB_LOG_L0, mask, fmt, ap);
506 	va_end(ap);
507 }
508 
509 
510 int
511 usb_log(usb_log_handle_t handle, uint_t level, uint_t mask, char *fmt, ...)
512 {
513 	va_list	ap;
514 	int rval;
515 
516 	va_start(ap, fmt);
517 	rval = usba_vlog(handle, level, mask, fmt, ap);
518 	va_end(ap);
519 
520 	return (rval);
521 }
522 
523 
524 /*
525  * Provide a default configuration power descriptor
526  */
527 usba_cfg_pwr_descr_t	default_cfg_power = {
528 	18,	/* bLength */
529 	USBA_DESCR_TYPE_CFG_PWR_1_1, /* bDescriptorType */
530 	0,	/* SelfPowerConsumedD0_l */
531 	0,	/* SelfPowerConsumedD0_h */
532 	0,	/* bPowerSummaryId */
533 	0,	/* bBusPowerSavingD1 */
534 	0,	/* bSelfPowerSavingD1 */
535 	0,	/* bBusPowerSavingD2 */
536 	0,	/* bSelfPowerSavingD2 */
537 	100,	/* bBusPowerSavingD3 */
538 	100,	/* bSelfPowerSavingD3 */
539 	0,	/* TransitionTimeFromD1 */
540 	0,	/* TransitionTimeFromD2 */
541 	10,	/* TransitionTimeFromD3 1 Second */
542 };
543 
544 
545 /*
546  * Provide a default interface power descriptor
547  */
548 usba_if_pwr_descr_t default_if_power = {
549 	15,	/* bLength */
550 	USBA_DESCR_TYPE_IF_PWR_1_1, /* bDescriptorType */
551 	8,	/* bmCapabilitiesFlags */
552 	0,	/* bBusPowerSavingD1 */
553 	0,	/* bSelfPowerSavingD1 */
554 	0,	/* bBusPowerSavingD2 */
555 	0,	/* bSelfPowerSavingD2 */
556 	100,	/* bBusPowerSavingD3 */
557 	100,	/* bSelfPowerSavingD3 */
558 	0,	/* TransitionTimeFromD1 */
559 	0,	/* TransitionTimeFromD2 */
560 	10,	/* TransitionTimeFromD3 1 Second */
561 };
562 
563 
564 static void
565 usba_async_req_raise_power(void *arg)
566 {
567 	usba_pm_req_t *pmrq = (usba_pm_req_t *)arg;
568 	int rval;
569 
570 	/*
571 	 * To eliminate race condition between the call to power entry
572 	 * point and our call to raise power level, we first mark the
573 	 * component busy and later idle
574 	 */
575 	(void) pm_busy_component(pmrq->dip, pmrq->comp);
576 	rval = pm_raise_power(pmrq->dip, pmrq->comp, pmrq->level);
577 	(void) pm_idle_component(pmrq->dip, pmrq->comp);
578 	pmrq->cb(pmrq->arg, rval);
579 
580 	/* We are done with pmrq. Free it now */
581 	kmem_free(pmrq, sizeof (usba_pm_req_t));
582 }
583 
584 
585 /* usb function to perform async pm_request_power_change */
586 int
587 usb_req_raise_power(dev_info_t *dip, int comp, int level,
588 	void (*callback)(void *, int), void *arg, usb_flags_t flags)
589 {
590 	usba_pm_req_t *pmrq;
591 
592 	if (flags & USB_FLAGS_SLEEP) {
593 
594 		return (pm_raise_power(dip, comp, level));
595 	}
596 
597 	if ((pmrq = kmem_alloc(sizeof (usba_pm_req_t), KM_NOSLEEP)) ==
598 	    NULL) {
599 
600 		return (USB_FAILURE);
601 	}
602 
603 	pmrq->dip = dip;
604 	pmrq->comp = comp;
605 	pmrq->level = level;
606 	pmrq->cb = callback;
607 	pmrq->arg = arg;
608 	pmrq->flags = flags;
609 
610 	if (usb_async_req(dip, usba_async_req_raise_power,
611 	    (void *)pmrq, USB_FLAGS_NOSLEEP | USB_FLAGS_NOQUEUE) !=
612 	    USB_SUCCESS) {
613 		kmem_free(pmrq, sizeof (usba_pm_req_t));
614 
615 		return (USB_FAILURE);
616 	}
617 
618 	return (USB_SUCCESS);
619 }
620 
621 
622 static void
623 usba_async_req_lower_power(void *arg)
624 {
625 	usba_pm_req_t *pmrq = (usba_pm_req_t *)arg;
626 	int rval;
627 
628 	/*
629 	 * To eliminate race condition between the call to power entry
630 	 * point and our call to lower power level, we call idle component
631 	 * to push ahead the PM timestamp
632 	 */
633 	(void) pm_idle_component(pmrq->dip, pmrq->comp);
634 	rval = pm_lower_power(pmrq->dip, pmrq->comp, pmrq->level);
635 	pmrq->cb(pmrq->arg, rval);
636 }
637 
638 
639 /* usb function to perform async pm_request_power_change */
640 int
641 usb_req_lower_power(dev_info_t *dip, int comp, int level,
642 	void (*callback)(void *, int), void *arg, usb_flags_t flags)
643 {
644 	usba_pm_req_t *pmrq;
645 
646 	if (flags & USB_FLAGS_SLEEP) {
647 
648 		return (pm_lower_power(dip, comp, level));
649 	}
650 
651 	if ((pmrq = kmem_alloc(sizeof (usba_pm_req_t), KM_NOSLEEP)) ==
652 	    NULL) {
653 
654 		return (USB_FAILURE);
655 	}
656 
657 	pmrq->dip = dip;
658 	pmrq->comp = comp;
659 	pmrq->level = level;
660 	pmrq->cb = callback;
661 	pmrq->arg = arg;
662 	pmrq->flags = flags;
663 
664 	if (usb_async_req(dip, usba_async_req_lower_power,
665 	    (void *)pmrq, USB_FLAGS_NOSLEEP | USB_FLAGS_NOQUEUE) !=
666 	    USB_SUCCESS) {
667 		kmem_free(pmrq, sizeof (usba_pm_req_t));
668 
669 		return (USB_FAILURE);
670 	}
671 
672 	return (USB_SUCCESS);
673 }
674 
675 
676 /* function to see if pm is enabled for this device */
677 /*ARGSUSED*/
678 int
679 usb_is_pm_enabled(dev_info_t *dip)
680 {
681 	usba_device_t  *usba_device = usba_get_usba_device(dip);
682 
683 	switch (usb_force_enable_pm) {
684 	case -1:
685 		/* no PM at all */
686 
687 		return (USB_FAILURE);
688 	case 1:
689 		/* PM on all platforms, regardless of hcd */
690 
691 		return (USB_SUCCESS);
692 	case 0:
693 	default:
694 
695 		break;
696 
697 	}
698 
699 	if (usba_device) {
700 		dev_info_t *root_hub_dip;
701 		usba_hcdi_t *hcdi;
702 		int rval;
703 
704 		root_hub_dip = usba_device->usb_root_hub_dip;
705 		if (root_hub_dip == NULL) {
706 
707 			return (USB_FAILURE);
708 		}
709 
710 		hcdi = usba_hcdi_get_hcdi(root_hub_dip);
711 		if (hcdi && hcdi->hcdi_ops->usba_hcdi_pm_support) {
712 			rval = hcdi->hcdi_ops->
713 			    usba_hcdi_pm_support(root_hub_dip);
714 			if (rval != USB_SUCCESS) {
715 				USB_DPRINTF_L2(DPRINT_MASK_USBA,
716 				    usbai_log_handle,
717 				    "%s%d: no PM enabled for this device",
718 				    ddi_driver_name(dip),
719 				    ddi_get_instance(dip));
720 			}
721 
722 			return (rval);
723 		}
724 	}
725 
726 	return (USB_FAILURE);
727 }
728 
729 
730 /*
731  * usba_handle_device_remote_wakeup:
732  *	internal function to enable/disable remote wakeup in the device
733  *	or interface
734  */
735 static int
736 usba_handle_device_remote_wakeup(dev_info_t *dip, int cmd)
737 {
738 	int		rval;
739 	uint8_t 	bmRequest = USB_DEV_REQ_HOST_TO_DEV;
740 	uchar_t		bRequest;
741 	uint16_t	wIndex = 0;
742 	usb_cr_t	completion_reason = 0;
743 	usb_cb_flags_t	cb_flags;
744 	usb_pipe_handle_t ph;
745 
746 	USB_DPRINTF_L4(DPRINT_MASK_USBA, usbai_log_handle,
747 	    "usba_handle_device_remote_wakeup: dip = 0x%p", (void *)dip);
748 
749 	USBA_CHECK_CONTEXT();
750 
751 	/* get the default pipe */
752 	ph = usba_get_dflt_pipe_handle(dip);
753 
754 	/* do we own the device? */
755 	if (usb_owns_device(dip)) {
756 		bmRequest |= USB_DEV_REQ_RCPT_DEV;
757 	} else {
758 		bmRequest |= USB_DEV_REQ_RCPT_IF;
759 		wIndex = usba_get_ifno(dip);
760 	}
761 	bRequest = ((cmd == USB_REMOTE_WAKEUP_ENABLE) ? USB_REQ_SET_FEATURE :
762 	    USB_REQ_CLEAR_FEATURE);
763 
764 	if ((rval = usb_pipe_sync_ctrl_xfer(dip, ph,
765 	    bmRequest,			/* bmRequest */
766 	    bRequest,			/* bRequest */
767 	    USB_DEV_REMOTE_WAKEUP,	/* wValue */
768 	    wIndex,			/* wIndex */
769 	    0,				/* wLength */
770 	    NULL, 0,
771 	    &completion_reason,
772 	    &cb_flags, USB_FLAGS_SLEEP)) != USB_SUCCESS) {
773 		USB_DPRINTF_L2(DPRINT_MASK_USBAI, usbai_log_handle,
774 		    "Set/ClearFeature (RemoteWakep) failed: "
775 		    "rval = %d, cmd = %d, cr = 0x%x cb = 0x%x",
776 		    rval, cmd, completion_reason, cb_flags);
777 	}
778 
779 	return (rval);
780 }
781 
782 
783 void
784 usb_enable_parent_notification(dev_info_t *dip)
785 {
786 	USBA_CHECK_CONTEXT();
787 	(void) ndi_prop_create_boolean(DDI_DEV_T_NONE, dip,
788 	    "pm-want-child-notification?");
789 }
790 
791 
792 /*
793  * usb_handle_remote_wakeup:
794  *	check if device supports remote wakeup and, if so, enable/disable
795  *	remote wake up in the device depending upon the command
796  */
797 int
798 usb_handle_remote_wakeup(dev_info_t *dip, int cmd)
799 {
800 	usb_cfg_descr_t	cfg_descr;
801 	uchar_t 	*usb_cfg;	/* buf for config descriptor */
802 	size_t		cfg_length;
803 	int		rval;
804 
805 	USBA_CHECK_CONTEXT();
806 
807 	/* Obtain the raw configuration descriptor */
808 	usb_cfg = usb_get_raw_cfg_data(dip, &cfg_length);
809 
810 	/* get configuration descriptor, must succeed */
811 	rval = usb_parse_cfg_descr(usb_cfg, cfg_length,
812 	    &cfg_descr, USB_CFG_DESCR_SIZE);
813 	ASSERT(rval == USB_CFG_DESCR_SIZE);
814 
815 	/*
816 	 * If the device supports remote wakeup, and PM is enabled,
817 	 * we enable remote wakeup in the device
818 	 */
819 	if ((usb_is_pm_enabled(dip) == USB_SUCCESS) &&
820 	    (cfg_descr.bmAttributes & USB_CFG_ATTR_REMOTE_WAKEUP)) {
821 
822 		rval = usba_handle_device_remote_wakeup(dip, cmd);
823 	} else {
824 		rval = USB_FAILURE;
825 	}
826 
827 	return (rval);
828 }
829 
830 
831 /*
832  * usb_create_pm_components:
833  *	map descriptor into  pm properties
834  */
835 int
836 usb_create_pm_components(dev_info_t *dip, uint_t *pwr_states)
837 {
838 	uchar_t 		*usb_cfg;	/* buf for config descriptor */
839 	usb_cfg_descr_t		cfg_descr;
840 	size_t			cfg_length;
841 	usba_cfg_pwr_descr_t	confpwr_descr;
842 	usba_if_pwr_descr_t	ifpwr_descr;
843 	uint8_t 		cfg_attrib;
844 	int			i, lvl, rval;
845 	int			n_prop = 0;
846 	uint8_t 		*ptr;
847 	char			*drvname;
848 	char			str[USBA_POWER_STR_SIZE];
849 	char			*pm_comp[USBA_N_PMCOMP];
850 
851 	USBA_CHECK_CONTEXT();
852 
853 	if (usb_is_pm_enabled(dip) != USB_SUCCESS) {
854 
855 		return (USB_FAILURE);
856 	}
857 
858 	/* Obtain the raw configuration descriptor */
859 	usb_cfg = usb_get_raw_cfg_data(dip, &cfg_length);
860 
861 	/* get configuration descriptor, must succceed */
862 	rval = usb_parse_cfg_descr(usb_cfg, cfg_length,
863 	    &cfg_descr, USB_CFG_DESCR_SIZE);
864 	ASSERT(rval == USB_CFG_DESCR_SIZE);
865 
866 	cfg_attrib = cfg_descr.bmAttributes;
867 	*pwr_states = 0;
868 
869 	/*
870 	 * Now start creating the pm-components strings
871 	 */
872 	drvname = (char *)ddi_driver_name(dip);
873 	(void) snprintf(str, USBA_POWER_STR_SIZE, "NAME= %s%d Power",
874 	    drvname, ddi_get_instance(dip));
875 
876 	pm_comp[n_prop] = kmem_zalloc(strlen(str) + 1, KM_SLEEP);
877 	(void) strcpy(pm_comp[n_prop++], str);
878 
879 	/*
880 	 * if the device is bus powered we look at the bBusPowerSavingDx
881 	 * fields else we look at bSelfPowerSavingDx fields.
882 	 * OS and USB power states are numerically reversed,
883 	 *
884 	 * Here is the mapping :-
885 	 *	OS State	USB State
886 	 *	0		D3	(minimal or no power)
887 	 *	1		D2
888 	 *	2		D1
889 	 *	3		D0	(Full power)
890 	 *
891 	 * if we own the whole device, we look at the config pwr descr
892 	 * else at the interface pwr descr.
893 	 */
894 	if (usb_owns_device(dip)) {
895 		/* Parse the configuration power descriptor */
896 		rval = usba_parse_cfg_pwr_descr(usb_cfg, cfg_length,
897 		    &confpwr_descr, USBA_CFG_PWR_DESCR_SIZE);
898 
899 		if (rval != USBA_CFG_PWR_DESCR_SIZE) {
900 			USB_DPRINTF_L2(DPRINT_MASK_USBAI, usbai_log_handle,
901 			    "usb_create_pm_components: "
902 			    "usb_parse_cfg_pwr_descr returns length of %d, "
903 			    "expecting %d", rval, USBA_CFG_PWR_DESCR_SIZE);
904 
905 			return (USB_FAILURE);
906 		}
907 
908 		if (cfg_attrib & USB_CFG_ATTR_SELFPWR) {
909 			ptr = &confpwr_descr.bSelfPowerSavingD3;
910 		} else {
911 			ptr = &confpwr_descr.bBusPowerSavingD3;
912 		}
913 	} else {
914 		/* Parse the interface power descriptor */
915 		rval = usba_parse_if_pwr_descr(usb_cfg,
916 		    cfg_length,
917 		    usba_get_ifno(dip),	/* interface index */
918 		    0,			/* XXXX alt interface index */
919 		    &ifpwr_descr,
920 		    USBA_IF_PWR_DESCR_SIZE);
921 
922 		if (rval != USBA_IF_PWR_DESCR_SIZE) {
923 			USB_DPRINTF_L2(DPRINT_MASK_USBAI, usbai_log_handle,
924 			    "usb_create_pm_components: "
925 			    "usb_parse_if_pwr_descr "
926 			    "returns length of %d, "
927 			    "expecting %d", rval, USBA_CFG_PWR_DESCR_SIZE);
928 
929 			return (USB_FAILURE);
930 		}
931 
932 		if (cfg_attrib & USB_CFG_ATTR_SELFPWR) {
933 			ptr =  &ifpwr_descr.bSelfPowerSavingD3;
934 		} else {
935 			ptr =  &ifpwr_descr.bBusPowerSavingD3;
936 		}
937 	}
938 
939 	/* walk thru levels and create prop level=name strings */
940 	for (lvl = USB_DEV_OS_PWR_0; lvl <= USB_DEV_OS_PWR_3; lvl++) {
941 		if (*ptr || (lvl == USB_DEV_OS_PWR_3)) {
942 			(void) snprintf(str, USBA_POWER_STR_SIZE,
943 			    "%d=USB D%d State",
944 			    lvl, USB_DEV_OS_PWR2USB_PWR(lvl));
945 			pm_comp[n_prop] = kmem_zalloc(strlen(str) + 1,
946 			    KM_SLEEP);
947 			(void) strcpy(pm_comp[n_prop++], str);
948 
949 			*pwr_states |= USB_DEV_PWRMASK(lvl);
950 		}
951 
952 		ptr -= 2; /* skip to the next power state */
953 	}
954 
955 	USB_DPRINTF_L3(DPRINT_MASK_USBAI, usbai_log_handle,
956 	    "usb_create_pm_components: pwr_states: %x", *pwr_states);
957 
958 	/* now create the actual components */
959 	rval = ddi_prop_update_string_array(DDI_DEV_T_NONE, dip,
960 	    "pm-components", pm_comp, n_prop);
961 	if (rval == DDI_PROP_SUCCESS) {
962 		rval = USB_SUCCESS;
963 	} else {
964 		rval = USB_FAILURE;
965 	}
966 
967 	/* display & delete properties */
968 	USB_DPRINTF_L3(DPRINT_MASK_USBAI, usbai_log_handle,
969 	    "usb_create_pm_components: The properties are:");
970 	for (i = 0; i < n_prop; i++) {
971 		USB_DPRINTF_L3(DPRINT_MASK_USBAI, usbai_log_handle,
972 		    "\t%s", pm_comp[i]);
973 		kmem_free(pm_comp[i], strlen(pm_comp[i]) + 1);
974 	}
975 
976 	return (rval);
977 }
978 
979 
980 /*
981  * Generic Functions to set the power level of any usb device
982  *
983  * Since OS and USB power states are numerically reverse,
984  * Here is the mapping :-
985  *	OS State	USB State
986  *	0		D3	(minimal or no power)
987  *	1		D2
988  *	2		D1
989  *	3		D0	(Full power)
990  */
991 
992 /* set device power level to 0 (full power) */
993 /*ARGSUSED*/
994 int
995 usb_set_device_pwrlvl0(dev_info_t *dip)
996 {
997 	USB_DPRINTF_L4(DPRINT_MASK_USBAI, usbai_log_handle,
998 	    "usb_set_device_pwrlvl0 : Not Yet Implemented");
999 
1000 	return (USB_SUCCESS);
1001 }
1002 
1003 
1004 /* set device power level to 1	*/
1005 /*ARGSUSED*/
1006 int
1007 usb_set_device_pwrlvl1(dev_info_t *dip)
1008 {
1009 	USB_DPRINTF_L4(DPRINT_MASK_USBAI, usbai_log_handle,
1010 	    "usb_set_device_pwrlvl1 : Not Yet Implemented");
1011 
1012 	return (USB_SUCCESS);
1013 }
1014 
1015 
1016 /* set device power level to 2	*/
1017 /*ARGSUSED*/
1018 int
1019 usb_set_device_pwrlvl2(dev_info_t *dip)
1020 {
1021 	USB_DPRINTF_L4(DPRINT_MASK_USBAI, usbai_log_handle,
1022 	    "usb_set_device_pwrlvl2 : Not Yet Implemented");
1023 
1024 	return (USB_SUCCESS);
1025 }
1026 
1027 
1028 /* set device power level to 3	*/
1029 /*ARGSUSED*/
1030 int
1031 usb_set_device_pwrlvl3(dev_info_t *dip)
1032 {
1033 	USB_DPRINTF_L4(DPRINT_MASK_USBAI, usbai_log_handle,
1034 	    "usb_set_device_pwrlvl3 : Not Yet Implemented");
1035 
1036 	return (USB_SUCCESS);
1037 }
1038 
1039 
1040 /*
1041  * USB event management
1042  */
1043 typedef void (*peh_t)(dev_info_t *, ddi_eventcookie_t, void *, void *);
1044 
1045 
1046 /*
1047  * usb_register_hotplug_cbs:
1048  *	Register to get callbacks for hotplug events
1049  */
1050 /*ARGSUSED*/
1051 int
1052 usb_register_hotplug_cbs(dev_info_t *dip,
1053     int (*disconnect_event_handler)(dev_info_t *),
1054     int (*reconnect_event_handler)(dev_info_t *))
1055 {
1056 	usba_device_t		*usba_device;
1057 	usba_evdata_t		*evdata;
1058 
1059 	if ((dip == NULL) || (disconnect_event_handler == NULL) ||
1060 	    (reconnect_event_handler == NULL)) {
1061 		USB_DPRINTF_L2(DPRINT_MASK_USBAI, usbai_log_handle,
1062 		    "usb_register_hotplug_cbs: Bad argument(s)");
1063 
1064 		return (USB_FAILURE);
1065 	}
1066 
1067 	USB_DPRINTF_L4(DPRINT_MASK_USBAI, usbai_log_handle,
1068 	    "usb_register_hotplug_cbs: entry");
1069 
1070 	/*
1071 	 * The event list searches by ddi_get_eventcookie calls below, go
1072 	 * through hubd and so do not apply to host controllers.
1073 	 */
1074 	ASSERT(!usba_is_root_hub(dip));
1075 
1076 	usba_device = usba_get_usba_device(dip);
1077 	evdata = usba_get_evdata(dip);
1078 
1079 	if (usba_device->rm_cookie == NULL) {
1080 		if (ddi_get_eventcookie(dip, DDI_DEVI_REMOVE_EVENT,
1081 		    &usba_device->rm_cookie) != DDI_SUCCESS) {
1082 			USB_DPRINTF_L2(DPRINT_MASK_USBAI, usbai_log_handle,
1083 			    "usb_register_hotplug_cbs: get rm cookie failed");
1084 
1085 			goto fail;
1086 		}
1087 	}
1088 	if (ddi_add_event_handler(dip, usba_device->rm_cookie,
1089 	    (peh_t)disconnect_event_handler,
1090 	    NULL, &evdata->ev_rm_cb_id) != DDI_SUCCESS) {
1091 		USB_DPRINTF_L2(DPRINT_MASK_USBAI, usbai_log_handle,
1092 		    "usb_register_hotplug_cbs: add disconnect handler failed");
1093 
1094 		goto fail;
1095 	}
1096 
1097 	if (usba_device->ins_cookie == NULL) {
1098 		if (ddi_get_eventcookie(dip, DDI_DEVI_INSERT_EVENT,
1099 		    &usba_device->ins_cookie) != DDI_SUCCESS) {
1100 			USB_DPRINTF_L2(DPRINT_MASK_USBAI, usbai_log_handle,
1101 			    "usb_register_hotplug_cbs: get ins cookie failed");
1102 
1103 			goto fail;
1104 		}
1105 	}
1106 	if (ddi_add_event_handler(dip, usba_device->ins_cookie,
1107 	    (peh_t)reconnect_event_handler,
1108 	    NULL, &evdata->ev_ins_cb_id) != DDI_SUCCESS) {
1109 		USB_DPRINTF_L2(DPRINT_MASK_USBAI, usbai_log_handle,
1110 		    "usb_register_hotplug_cbs: add reconnect handler failed");
1111 
1112 		goto fail;
1113 	}
1114 
1115 	mutex_enter(&usba_device->usb_mutex);
1116 	usba_device->usb_client_flags[usba_get_ifno(dip)] |=
1117 	    USBA_CLIENT_FLAG_EV_CBS;
1118 	usba_device->usb_client_ev_cb_list->dip = dip;
1119 	mutex_exit(&usba_device->usb_mutex);
1120 
1121 	return (USB_SUCCESS);
1122 
1123 fail:
1124 	usb_unregister_hotplug_cbs(dip);
1125 
1126 	return (USB_FAILURE);
1127 
1128 }
1129 
1130 
1131 /*
1132  * usb_unregister_hotplug_cbs:
1133  *	Unregister hotplug callbacks
1134  */
1135 /*ARGSUSED*/
1136 void
1137 usb_unregister_hotplug_cbs(dev_info_t *dip)
1138 {
1139 	usb_unregister_event_cbs(dip, NULL);
1140 }
1141 
1142 
1143 /*
1144  * usb_register_event_cbs:
1145  *	Register to get callbacks for USB events
1146  */
1147 /*ARGSUSED*/
1148 int
1149 usb_register_event_cbs(dev_info_t *dip, usb_event_t *usb_evdata,
1150 	usb_flags_t flags)
1151 {
1152 	usba_device_t		*usba_device;
1153 	usba_evdata_t		*evdata;
1154 
1155 	if ((dip == NULL) || (usb_evdata == NULL)) {
1156 
1157 		return (USB_FAILURE);
1158 	}
1159 
1160 	/*
1161 	 * The event list searches by ddi_get_eventcookie calls below, go
1162 	 * through hubd and so do not apply to host controllers.
1163 	 */
1164 	ASSERT(!usba_is_root_hub(dip));
1165 
1166 	usba_device = usba_get_usba_device(dip);
1167 	evdata = usba_get_evdata(dip);
1168 
1169 	if (usb_evdata->disconnect_event_handler != NULL) {
1170 		if (usba_device->rm_cookie == NULL) {
1171 			if (ddi_get_eventcookie(dip, DDI_DEVI_REMOVE_EVENT,
1172 			    &usba_device->rm_cookie) != DDI_SUCCESS) {
1173 
1174 				goto fail;
1175 			}
1176 		}
1177 		if (ddi_add_event_handler(dip, usba_device->rm_cookie,
1178 		    (peh_t)usb_evdata->disconnect_event_handler,
1179 		    NULL, &evdata->ev_rm_cb_id) != DDI_SUCCESS) {
1180 
1181 			goto fail;
1182 		}
1183 	}
1184 	if (usb_evdata->reconnect_event_handler != NULL) {
1185 		if (usba_device->ins_cookie == NULL) {
1186 			if (ddi_get_eventcookie(dip, DDI_DEVI_INSERT_EVENT,
1187 			    &usba_device->ins_cookie) != DDI_SUCCESS) {
1188 
1189 				goto fail;
1190 			}
1191 		}
1192 		if (ddi_add_event_handler(dip, usba_device->ins_cookie,
1193 		    (peh_t)usb_evdata->reconnect_event_handler,
1194 		    NULL, &evdata->ev_ins_cb_id) != DDI_SUCCESS) {
1195 
1196 			goto fail;
1197 		}
1198 	}
1199 	if (usb_evdata->post_resume_event_handler != NULL) {
1200 		if (usba_device->resume_cookie == NULL) {
1201 			if (ddi_get_eventcookie(dip, USBA_POST_RESUME_EVENT,
1202 			    &usba_device->resume_cookie) != DDI_SUCCESS) {
1203 
1204 				goto fail;
1205 			}
1206 		}
1207 		if (ddi_add_event_handler(dip, usba_device->resume_cookie,
1208 		    (peh_t)usb_evdata->post_resume_event_handler,
1209 		    NULL, &evdata->ev_resume_cb_id) != DDI_SUCCESS) {
1210 
1211 			goto fail;
1212 		}
1213 	}
1214 	if (usb_evdata->pre_suspend_event_handler != NULL) {
1215 		if (usba_device->suspend_cookie == NULL) {
1216 			if (ddi_get_eventcookie(dip, USBA_PRE_SUSPEND_EVENT,
1217 			    &usba_device->suspend_cookie) != DDI_SUCCESS) {
1218 
1219 				goto fail;
1220 			}
1221 		}
1222 		if (ddi_add_event_handler(dip, usba_device->suspend_cookie,
1223 		    (peh_t)usb_evdata->pre_suspend_event_handler,
1224 		    NULL, &evdata->ev_suspend_cb_id) != DDI_SUCCESS) {
1225 
1226 			goto fail;
1227 		}
1228 	}
1229 
1230 	mutex_enter(&usba_device->usb_mutex);
1231 	usba_device->usb_client_flags[usba_get_ifno(dip)] |=
1232 	    USBA_CLIENT_FLAG_EV_CBS;
1233 	usba_device->usb_client_ev_cb_list->dip = dip;
1234 	usba_device->usb_client_ev_cb_list->ev_data = usb_evdata;
1235 	mutex_exit(&usba_device->usb_mutex);
1236 
1237 	return (USB_SUCCESS);
1238 
1239 fail:
1240 	usb_unregister_event_cbs(dip, usb_evdata);
1241 
1242 	return (USB_FAILURE);
1243 
1244 }
1245 
1246 
1247 /*
1248  * usb_unregister_event_cbs:
1249  *	Unregister all event callbacks
1250  */
1251 /*ARGSUSED*/
1252 void
1253 usb_unregister_event_cbs(dev_info_t *dip, usb_event_t *usb_evdata)
1254 {
1255 	usba_evdata_t		*evdata;
1256 	usba_device_t		*usba_device = usba_get_usba_device(dip);
1257 
1258 	evdata = usba_get_evdata(dip);
1259 
1260 	if (evdata->ev_rm_cb_id != NULL) {
1261 		(void) ddi_remove_event_handler(evdata->ev_rm_cb_id);
1262 		evdata->ev_rm_cb_id = NULL;
1263 	}
1264 
1265 	if (evdata->ev_ins_cb_id != NULL) {
1266 		(void) ddi_remove_event_handler(evdata->ev_ins_cb_id);
1267 		evdata->ev_ins_cb_id = NULL;
1268 	}
1269 
1270 	if (evdata->ev_suspend_cb_id != NULL) {
1271 		(void) ddi_remove_event_handler(evdata->ev_suspend_cb_id);
1272 		evdata->ev_suspend_cb_id = NULL;
1273 	}
1274 
1275 	if (evdata->ev_resume_cb_id != NULL) {
1276 		(void) ddi_remove_event_handler(evdata->ev_resume_cb_id);
1277 		evdata->ev_resume_cb_id = NULL;
1278 	}
1279 
1280 	mutex_enter(&usba_device->usb_mutex);
1281 	usba_device->usb_client_flags[usba_get_ifno(dip)] &=
1282 	    ~USBA_CLIENT_FLAG_EV_CBS;
1283 	mutex_exit(&usba_device->usb_mutex);
1284 }
1285 
1286 int
1287 usb_reset_device(dev_info_t *dip, usb_dev_reset_lvl_t reset_level)
1288 {
1289 	return (usba_hubdi_reset_device(dip, reset_level));
1290 }
1291