xref: /illumos-gate/usr/src/uts/i86pc/os/mp_machdep.c (revision 6ea3c060)

/*
 * CDDL HEADER START
 *
 * The contents of this file are subject to the terms of the
 * Common Development and Distribution License (the "License").
 * You may not use this file except in compliance with the License.
 *
 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
 * or http://www.opensolaris.org/os/licensing.
 * See the License for the specific language governing permissions
 * and limitations under the License.
 *
 * When distributing Covered Code, include this CDDL HEADER in each
 * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
 * If applicable, add the following below this CDDL HEADER, with the
 * fields enclosed by brackets "[]" replaced with your own identifying
 * information: Portions Copyright [yyyy] [name of copyright owner]
 *
 * CDDL HEADER END
 */
/*
 * Copyright (c) 1992, 2010, Oracle and/or its affiliates. All rights reserved.
 */
/*
 * Copyright (c) 2009-2010, Intel Corporation.
 * All rights reserved.
 */

#define	PSMI_1_7
#include <sys/smp_impldefs.h>
#include <sys/psm.h>
#include <sys/psm_modctl.h>
#include <sys/pit.h>
#include <sys/cmn_err.h>
#include <sys/strlog.h>
#include <sys/clock.h>
#include <sys/debug.h>
#include <sys/rtc.h>
#include <sys/x86_archext.h>
#include <sys/cpupart.h>
#include <sys/cpuvar.h>
#include <sys/cpu_event.h>
#include <sys/cmt.h>
#include <sys/cpu.h>
#include <sys/disp.h>
#include <sys/archsystm.h>
#include <sys/machsystm.h>
#include <sys/sysmacros.h>
#include <sys/memlist.h>
#include <sys/param.h>
#include <sys/promif.h>
#include <sys/cpu_pm.h>
#if defined(__xpv)
#include <sys/hypervisor.h>
#endif
#include <sys/mach_intr.h>
#include <vm/hat_i86.h>
#include <sys/kdi_machimpl.h>
#include <sys/sdt.h>
#include <sys/hpet.h>
#include <sys/sunddi.h>
#include <sys/sunndi.h>
#include <sys/cpc_pcbe.h>

#define	OFFSETOF(s, m)		(size_t)(&(((s *)0)->m))

/*
 *	Local function prototypes
 */
static int mp_disable_intr(processorid_t cpun);
static void mp_enable_intr(processorid_t cpun);
static void mach_init();
static void mach_picinit();
static int machhztomhz(uint64_t cpu_freq_hz);
static uint64_t mach_getcpufreq(void);
static void mach_fixcpufreq(void);
static int mach_clkinit(int, int *);
static void mach_smpinit(void);
static int mach_softlvl_to_vect(int ipl);
static void mach_get_platform(int owner);
static void mach_construct_info();
static int mach_translate_irq(dev_info_t *dip, int irqno);
static int mach_intr_ops(dev_info_t *, ddi_intr_handle_impl_t *,
    psm_intr_op_t, int *);
static void mach_notify_error(int level, char *errmsg);
static hrtime_t dummy_hrtime(void);
static void dummy_scalehrtime(hrtime_t *);
static uint64_t dummy_unscalehrtime(hrtime_t);
void cpu_idle(void);
static void cpu_wakeup(cpu_t *, int);
#ifndef __xpv
void cpu_idle_mwait(void);
static void cpu_wakeup_mwait(cpu_t *, int);
#endif
static int mach_cpu_create_devinfo(cpu_t *cp, dev_info_t **dipp);

/*
 *	External reference functions
 */
extern void return_instr();
extern uint64_t freq_tsc(uint32_t *);
#if defined(__i386)
extern uint64_t freq_notsc(uint32_t *);
#endif
extern void pc_gethrestime(timestruc_t *);
extern int cpuid_get_coreid(cpu_t *);
extern int cpuid_get_chipid(cpu_t *);

/*
 *	PSM functions initialization
 */
void (*psm_shutdownf)(int, int)	= (void (*)(int, int))return_instr;
void (*psm_preshutdownf)(int, int) = (void (*)(int, int))return_instr;
void (*psm_notifyf)(int)	= (void (*)(int))return_instr;
void (*psm_set_idle_cpuf)(int)	= (void (*)(int))return_instr;
void (*psm_unset_idle_cpuf)(int) = (void (*)(int))return_instr;
void (*psminitf)()		= mach_init;
void (*picinitf)() 		= return_instr;
int (*clkinitf)(int, int *) 	= (int (*)(int, int *))return_instr;
int (*ap_mlsetup)() 		= (int (*)(void))return_instr;
void (*send_dirintf)() 		= return_instr;
void (*setspl)(int)		= (void (*)(int))return_instr;
int (*addspl)(int, int, int, int) = (int (*)(int, int, int, int))return_instr;
int (*delspl)(int, int, int, int) = (int (*)(int, int, int, int))return_instr;
int (*get_pending_spl)(void)	= (int (*)(void))return_instr;
int (*addintr)(void *, int, avfunc, char *, int, caddr_t, caddr_t,
    uint64_t *, dev_info_t *) = NULL;
void (*remintr)(void *, int, avfunc, int) = NULL;
void (*kdisetsoftint)(int, struct av_softinfo *)=
	(void (*)(int, struct av_softinfo *))return_instr;
void (*setsoftint)(int, struct av_softinfo *)=
	(void (*)(int, struct av_softinfo *))return_instr;
int (*slvltovect)(int)		= (int (*)(int))return_instr;
int (*setlvl)(int, int *)	= (int (*)(int, int *))return_instr;
void (*setlvlx)(int, int)	= (void (*)(int, int))return_instr;
int (*psm_disable_intr)(int)	= mp_disable_intr;
void (*psm_enable_intr)(int)	= mp_enable_intr;
hrtime_t (*gethrtimef)(void)	= dummy_hrtime;
hrtime_t (*gethrtimeunscaledf)(void)	= dummy_hrtime;
void (*scalehrtimef)(hrtime_t *)	= dummy_scalehrtime;
uint64_t (*unscalehrtimef)(hrtime_t)	= dummy_unscalehrtime;
int (*psm_translate_irq)(dev_info_t *, int) = mach_translate_irq;
void (*gethrestimef)(timestruc_t *) = pc_gethrestime;
void (*psm_notify_error)(int, char *) = (void (*)(int, char *))NULL;
int (*psm_get_clockirq)(int) = NULL;
int (*psm_get_ipivect)(int, int) = NULL;
uchar_t (*psm_get_ioapicid)(uchar_t) = NULL;
uint32_t (*psm_get_localapicid)(uint32_t) = NULL;
uchar_t (*psm_xlate_vector_by_irq)(uchar_t) = NULL;

int (*psm_clkinit)(int) = NULL;
void (*psm_timer_reprogram)(hrtime_t) = NULL;
void (*psm_timer_enable)(void) = NULL;
void (*psm_timer_disable)(void) = NULL;
void (*psm_post_cyclic_setup)(void *arg) = NULL;
int (*psm_intr_ops)(dev_info_t *, ddi_intr_handle_impl_t *, psm_intr_op_t,
    int *) = mach_intr_ops;
int (*psm_state)(psm_state_request_t *) = (int (*)(psm_state_request_t *))
    return_instr;

void (*notify_error)(int, char *) = (void (*)(int, char *))return_instr;
void (*hrtime_tick)(void)	= return_instr;

int (*psm_cpu_create_devinfo)(cpu_t *, dev_info_t **) = mach_cpu_create_devinfo;
int (*psm_cpu_get_devinfo)(cpu_t *, dev_info_t **) = NULL;

/* global IRM pool for APIX (PSM) module */
ddi_irm_pool_t *apix_irm_pool_p = NULL;

/*
 * True if the generic TSC code is our source of hrtime, rather than whatever
 * the PSM can provide.
 */
#ifdef __xpv
int tsc_gethrtime_enable = 0;
#else
int tsc_gethrtime_enable = 1;
#endif
int tsc_gethrtime_initted = 0;

/*
 * True if the hrtime implementation is "hires"; namely, better than microdata.
 */
int gethrtime_hires = 0;

/*
 * Local Static Data
 */
static struct psm_ops mach_ops;
static struct psm_ops *mach_set[4] = {&mach_ops, NULL, NULL, NULL};
static ushort_t mach_ver[4] = {0, 0, 0, 0};

/*
 * virtualization support for psm
 */
void *psm_vt_ops = NULL;
/*
 * If non-zero, idle cpus will become "halted" when there's
 * no work to do.
 */
int	idle_cpu_use_hlt = 1;

#ifndef __xpv
/*
 * If non-zero, idle cpus will use mwait if available to halt instead of hlt.
 */
int	idle_cpu_prefer_mwait = 1;
/*
 * Set to 0 to avoid MONITOR+CLFLUSH assertion.
 */
int	idle_cpu_assert_cflush_monitor = 1;

/*
 * If non-zero, idle cpus will not use power saving Deep C-States idle loop.
 */
int	idle_cpu_no_deep_c = 0;
/*
 * Non-power saving idle loop and wakeup pointers.
 * Allows user to toggle Deep Idle power saving feature on/off.
 */
void	(*non_deep_idle_cpu)() = cpu_idle;
void	(*non_deep_idle_disp_enq_thread)(cpu_t *, int);

/*
 * Object for the kernel to access the HPET.
 */
hpet_t hpet;

#endif	/* ifndef __xpv */

uint_t cp_haltset_fanout = 0;

/*ARGSUSED*/
int
pg_plat_hw_shared(cpu_t *cp, pghw_type_t hw)
{
	switch (hw) {
	case PGHW_IPIPE:
		if (is_x86_feature(x86_featureset, X86FSET_HTT)) {
			/*
			 * Hyper-threading is SMT
			 */
			return (1);
		} else {
			return (0);
		}
	case PGHW_PROCNODE:
		if (cpuid_get_procnodes_per_pkg(cp) > 1)
			return (1);
		else
			return (0);
	case PGHW_CHIP:
		if (is_x86_feature(x86_featureset, X86FSET_CMP) ||
		    is_x86_feature(x86_featureset, X86FSET_HTT))
			return (1);
		else
			return (0);
	case PGHW_CACHE:
		if (cpuid_get_ncpu_sharing_last_cache(cp) > 1)
			return (1);
		else
			return (0);
	case PGHW_POW_ACTIVE:
		if (cpupm_domain_id(cp, CPUPM_DTYPE_ACTIVE) != (id_t)-1)
			return (1);
		else
			return (0);
	case PGHW_POW_IDLE:
		if (cpupm_domain_id(cp, CPUPM_DTYPE_IDLE) != (id_t)-1)
			return (1);
		else
			return (0);
	default:
		return (0);
	}
}

/*
 * Compare two CPUs and see if they have a pghw_type_t sharing relationship
 * If pghw_type_t is an unsupported hardware type, then return -1
 */
int
pg_plat_cpus_share(cpu_t *cpu_a, cpu_t *cpu_b, pghw_type_t hw)
{
	id_t pgp_a, pgp_b;

	pgp_a = pg_plat_hw_instance_id(cpu_a, hw);
	pgp_b = pg_plat_hw_instance_id(cpu_b, hw);

	if (pgp_a == -1 || pgp_b == -1)
		return (-1);

	return (pgp_a == pgp_b);
}

/*
 * Return a physical instance identifier for known hardware sharing
 * relationships
 */
id_t
pg_plat_hw_instance_id(cpu_t *cpu, pghw_type_t hw)
{
	switch (hw) {
	case PGHW_IPIPE:
		return (cpuid_get_coreid(cpu));
	case PGHW_CACHE:
		return (cpuid_get_last_lvl_cacheid(cpu));
	case PGHW_PROCNODE:
		return (cpuid_get_procnodeid(cpu));
	case PGHW_CHIP:
		return (cpuid_get_chipid(cpu));
	case PGHW_POW_ACTIVE:
		return (cpupm_domain_id(cpu, CPUPM_DTYPE_ACTIVE));
	case PGHW_POW_IDLE:
		return (cpupm_domain_id(cpu, CPUPM_DTYPE_IDLE));
	default:
		return (-1);
	}
}

/*
 * Express preference for optimizing for sharing relationship
 * hw1 vs hw2
 */
pghw_type_t
pg_plat_hw_rank(pghw_type_t hw1, pghw_type_t hw2)
{
	int i, rank1, rank2;

	static pghw_type_t hw_hier[] = {
		PGHW_IPIPE,
		PGHW_CACHE,
		PGHW_PROCNODE,
		PGHW_CHIP,
		PGHW_POW_IDLE,
		PGHW_POW_ACTIVE,
		PGHW_NUM_COMPONENTS
	};

	for (i = 0; hw_hier[i] != PGHW_NUM_COMPONENTS; i++) {
		if (hw_hier[i] == hw1)
			rank1 = i;
		if (hw_hier[i] == hw2)
			rank2 = i;
	}

	if (rank1 > rank2)
		return (hw1);
	else
		return (hw2);
}

/*
 * Override the default CMT dispatcher policy for the specified
 * hardware sharing relationship
 */
pg_cmt_policy_t
pg_plat_cmt_policy(pghw_type_t hw)
{
	/*
	 * For shared caches, also load balance across them to
	 * maximize aggregate cache capacity
	 */
	switch (hw) {
	case PGHW_CACHE:
		return (CMT_BALANCE|CMT_AFFINITY);
	default:
		return (CMT_NO_POLICY);
	}
}

id_t
pg_plat_get_core_id(cpu_t *cpu)
{
	return ((id_t)cpuid_get_coreid(cpu));
}

void
cmp_set_nosteal_interval(void)
{
	/* Set the nosteal interval (used by disp_getbest()) to 100us */
	nosteal_nsec = 100000UL;
}

/*
 * Routine to ensure initial callers to hrtime gets 0 as return
 */
static hrtime_t
dummy_hrtime(void)
{
	return (0);
}

/* ARGSUSED */
static void
dummy_scalehrtime(hrtime_t *ticks)
{}

static uint64_t
dummy_unscalehrtime(hrtime_t nsecs)
{
	return ((uint64_t)nsecs);
}

/*
 * Supports Deep C-State power saving idle loop.
 */
void
cpu_idle_adaptive(void)
{
	(*CPU->cpu_m.mcpu_idle_cpu)();
}

/*
 * Function called by CPU idle notification framework to check whether CPU
 * has been awakened. It will be called with interrupt disabled.
 * If CPU has been awakened, call cpu_idle_exit() to notify CPU idle
 * notification framework.
 */
/*ARGSUSED*/
static void
cpu_idle_check_wakeup(void *arg)
{
	/*
	 * Toggle interrupt flag to detect pending interrupts.
	 * If interrupt happened, do_interrupt() will notify CPU idle
	 * notification framework so no need to call cpu_idle_exit() here.
	 */
	sti();
	SMT_PAUSE();
	cli();
}

/*
 * Idle the present CPU until wakened via an interrupt
 */
void
cpu_idle(void)
{
	cpu_t		*cpup = CPU;
	processorid_t	cpu_sid = cpup->cpu_seqid;
	cpupart_t	*cp = cpup->cpu_part;
	int		hset_update = 1;

	/*
	 * If this CPU is online, and there's multiple CPUs
	 * in the system, then we should notate our halting
	 * by adding ourselves to the partition's halted CPU
	 * bitmap. This allows other CPUs to find/awaken us when
	 * work becomes available.
	 */
	if (cpup->cpu_flags & CPU_OFFLINE || ncpus == 1)
		hset_update = 0;

	/*
	 * Add ourselves to the partition's halted CPUs bitmap
	 * and set our HALTED flag, if necessary.
	 *
	 * When a thread becomes runnable, it is placed on the queue
	 * and then the halted CPU bitmap is checked to determine who
	 * (if anyone) should be awakened. We therefore need to first
	 * add ourselves to the bitmap, and and then check if there
	 * is any work available. The order is important to prevent a race
	 * that can lead to work languishing on a run queue somewhere while
	 * this CPU remains halted.
	 *
	 * Either the producing CPU will see we're halted and will awaken us,
	 * or this CPU will see the work available in disp_anywork().
	 *
	 * Note that memory barriers after updating the HALTED flag
	 * are not necessary since an atomic operation (updating the bitset)
	 * immediately follows. On x86 the atomic operation acts as a
	 * memory barrier for the update of cpu_disp_flags.
	 */
	if (hset_update) {
		cpup->cpu_disp_flags |= CPU_DISP_HALTED;
		bitset_atomic_add(&cp->cp_haltset, cpu_sid);
	}

	/*
	 * Check to make sure there's really nothing to do.
	 * Work destined for this CPU may become available after
	 * this check. We'll be notified through the clearing of our
	 * bit in the halted CPU bitmap, and a poke.
	 */
	if (disp_anywork()) {
		if (hset_update) {
			cpup->cpu_disp_flags &= ~CPU_DISP_HALTED;
			bitset_atomic_del(&cp->cp_haltset, cpu_sid);
		}
		return;
	}

	/*
	 * We're on our way to being halted.
	 *
	 * Disable interrupts now, so that we'll awaken immediately
	 * after halting if someone tries to poke us between now and
	 * the time we actually halt.
	 *
	 * We check for the presence of our bit after disabling interrupts.
	 * If it's cleared, we'll return. If the bit is cleared after
	 * we check then the poke will pop us out of the halted state.
	 *
	 * This means that the ordering of the poke and the clearing
	 * of the bit by cpu_wakeup is important.
	 * cpu_wakeup() must clear, then poke.
	 * cpu_idle() must disable interrupts, then check for the bit.
	 */
	cli();

	if (hset_update && bitset_in_set(&cp->cp_haltset, cpu_sid) == 0) {
		cpup->cpu_disp_flags &= ~CPU_DISP_HALTED;
		sti();
		return;
	}

	/*
	 * The check for anything locally runnable is here for performance
	 * and isn't needed for correctness. disp_nrunnable ought to be
	 * in our cache still, so it's inexpensive to check, and if there
	 * is anything runnable we won't have to wait for the poke.
	 */
	if (cpup->cpu_disp->disp_nrunnable != 0) {
		if (hset_update) {
			cpup->cpu_disp_flags &= ~CPU_DISP_HALTED;
			bitset_atomic_del(&cp->cp_haltset, cpu_sid);
		}
		sti();
		return;
	}

	if (cpu_idle_enter(IDLE_STATE_C1, 0,
	    cpu_idle_check_wakeup, NULL) == 0) {
		mach_cpu_idle();
		cpu_idle_exit(CPU_IDLE_CB_FLAG_IDLE);
	}

	/*
	 * We're no longer halted
	 */
	if (hset_update) {
		cpup->cpu_disp_flags &= ~CPU_DISP_HALTED;
		bitset_atomic_del(&cp->cp_haltset, cpu_sid);
	}
}


/*
 * If "cpu" is halted, then wake it up clearing its halted bit in advance.
 * Otherwise, see if other CPUs in the cpu partition are halted and need to
 * be woken up so that they can steal the thread we placed on this CPU.
 * This function is only used on MP systems.
 */
static void
cpu_wakeup(cpu_t *cpu, int bound)
{
	uint_t		cpu_found;
	processorid_t	cpu_sid;
	cpupart_t	*cp;

	cp = cpu->cpu_part;
	cpu_sid = cpu->cpu_seqid;
	if (bitset_in_set(&cp->cp_haltset, cpu_sid)) {
		/*
		 * Clear the halted bit for that CPU since it will be
		 * poked in a moment.
		 */
		bitset_atomic_del(&cp->cp_haltset, cpu_sid);
		/*
		 * We may find the current CPU present in the halted cpuset
		 * if we're in the context of an interrupt that occurred
		 * before we had a chance to clear our bit in cpu_idle().
		 * Poking ourself is obviously unnecessary, since if
		 * we're here, we're not halted.
		 */
		if (cpu != CPU)
			poke_cpu(cpu->cpu_id);
		return;
	} else {
		/*
		 * This cpu isn't halted, but it's idle or undergoing a
		 * context switch. No need to awaken anyone else.
		 */
		if (cpu->cpu_thread == cpu->cpu_idle_thread ||
		    cpu->cpu_disp_flags & CPU_DISP_DONTSTEAL)
			return;
	}

	/*
	 * No need to wake up other CPUs if this is for a bound thread.
	 */
	if (bound)
		return;

	/*
	 * The CPU specified for wakeup isn't currently halted, so check
	 * to see if there are any other halted CPUs in the partition,
	 * and if there are then awaken one.
	 */
	do {
		cpu_found = bitset_find(&cp->cp_haltset);
		if (cpu_found == (uint_t)-1)
			return;
	} while (bitset_atomic_test_and_del(&cp->cp_haltset, cpu_found) < 0);

	if (cpu_found != CPU->cpu_seqid) {
		poke_cpu(cpu_seq[cpu_found]->cpu_id);
	}
}

#ifndef __xpv
/*
 * Function called by CPU idle notification framework to check whether CPU
 * has been awakened. It will be called with interrupt disabled.
 * If CPU has been awakened, call cpu_idle_exit() to notify CPU idle
 * notification framework.
 */
static void
cpu_idle_mwait_check_wakeup(void *arg)
{
	volatile uint32_t *mcpu_mwait = (volatile uint32_t *)arg;

	ASSERT(arg != NULL);
	if (*mcpu_mwait != MWAIT_HALTED) {
		/*
		 * CPU has been awakened, notify CPU idle notification system.
		 */
		cpu_idle_exit(CPU_IDLE_CB_FLAG_IDLE);
	} else {
		/*
		 * Toggle interrupt flag to detect pending interrupts.
		 * If interrupt happened, do_interrupt() will notify CPU idle
		 * notification framework so no need to call cpu_idle_exit()
		 * here.
		 */
		sti();
		SMT_PAUSE();
		cli();
	}
}

/*
 * Idle the present CPU until awakened via touching its monitored line
 */
void
cpu_idle_mwait(void)
{
	volatile uint32_t	*mcpu_mwait = CPU->cpu_m.mcpu_mwait;
	cpu_t			*cpup = CPU;
	processorid_t		cpu_sid = cpup->cpu_seqid;
	cpupart_t		*cp = cpup->cpu_part;
	int			hset_update = 1;

	/*
	 * Set our mcpu_mwait here, so we can tell if anyone tries to
	 * wake us between now and when we call mwait.  No other cpu will
	 * attempt to set our mcpu_mwait until we add ourself to the halted
	 * CPU bitmap.
	 */
	*mcpu_mwait = MWAIT_HALTED;

	/*
	 * If this CPU is online, and there's multiple CPUs
	 * in the system, then we should note our halting
	 * by adding ourselves to the partition's halted CPU
	 * bitmap. This allows other CPUs to find/awaken us when
	 * work becomes available.
	 */
	if (cpup->cpu_flags & CPU_OFFLINE || ncpus == 1)
		hset_update = 0;

	/*
	 * Add ourselves to the partition's halted CPUs bitmap
	 * and set our HALTED flag, if necessary.
	 *
	 * When a thread becomes runnable, it is placed on the queue
	 * and then the halted CPU bitmap is checked to determine who
	 * (if anyone) should be awakened. We therefore need to first
	 * add ourselves to the bitmap, and and then check if there
	 * is any work available.
	 *
	 * Note that memory barriers after updating the HALTED flag
	 * are not necessary since an atomic operation (updating the bitmap)
	 * immediately follows. On x86 the atomic operation acts as a
	 * memory barrier for the update of cpu_disp_flags.
	 */
	if (hset_update) {
		cpup->cpu_disp_flags |= CPU_DISP_HALTED;
		bitset_atomic_add(&cp->cp_haltset, cpu_sid);
	}

	/*
	 * Check to make sure there's really nothing to do.
	 * Work destined for this CPU may become available after
	 * this check. We'll be notified through the clearing of our
	 * bit in the halted CPU bitmap, and a write to our mcpu_mwait.
	 *
	 * disp_anywork() checks disp_nrunnable, so we do not have to later.
	 */
	if (disp_anywork()) {
		if (hset_update) {
			cpup->cpu_disp_flags &= ~CPU_DISP_HALTED;
			bitset_atomic_del(&cp->cp_haltset, cpu_sid);
		}
		return;
	}

	/*
	 * We're on our way to being halted.
	 * To avoid a lost wakeup, arm the monitor before checking if another
	 * cpu wrote to mcpu_mwait to wake us up.
	 */
	i86_monitor(mcpu_mwait, 0, 0);
	if (*mcpu_mwait == MWAIT_HALTED) {
		if (cpu_idle_enter(IDLE_STATE_C1, 0,
		    cpu_idle_mwait_check_wakeup, (void *)mcpu_mwait) == 0) {
			if (*mcpu_mwait == MWAIT_HALTED) {
				i86_mwait(0, 0);
			}
			cpu_idle_exit(CPU_IDLE_CB_FLAG_IDLE);
		}
	}

	/*
	 * We're no longer halted
	 */
	if (hset_update) {
		cpup->cpu_disp_flags &= ~CPU_DISP_HALTED;
		bitset_atomic_del(&cp->cp_haltset, cpu_sid);
	}
}

/*
 * If "cpu" is halted in mwait, then wake it up clearing its halted bit in
 * advance.  Otherwise, see if other CPUs in the cpu partition are halted and
 * need to be woken up so that they can steal the thread we placed on this CPU.
 * This function is only used on MP systems.
 */
static void
cpu_wakeup_mwait(cpu_t *cp, int bound)
{
	cpupart_t	*cpu_part;
	uint_t		cpu_found;
	processorid_t	cpu_sid;

	cpu_part = cp->cpu_part;
	cpu_sid = cp->cpu_seqid;

	/*
	 * Clear the halted bit for that CPU since it will be woken up
	 * in a moment.
	 */
	if (bitset_in_set(&cpu_part->cp_haltset, cpu_sid)) {
		/*
		 * Clear the halted bit for that CPU since it will be
		 * poked in a moment.
		 */
		bitset_atomic_del(&cpu_part->cp_haltset, cpu_sid);
		/*
		 * We may find the current CPU present in the halted cpuset
		 * if we're in the context of an interrupt that occurred
		 * before we had a chance to clear our bit in cpu_idle().
		 * Waking ourself is obviously unnecessary, since if
		 * we're here, we're not halted.
		 *
		 * monitor/mwait wakeup via writing to our cache line is
		 * harmless and less expensive than always checking if we
		 * are waking ourself which is an uncommon case.
		 */
		MWAIT_WAKEUP(cp);	/* write to monitored line */
		return;
	} else {
		/*
		 * This cpu isn't halted, but it's idle or undergoing a
		 * context switch. No need to awaken anyone else.
		 */
		if (cp->cpu_thread == cp->cpu_idle_thread ||
		    cp->cpu_disp_flags & CPU_DISP_DONTSTEAL)
			return;
	}

	/*
	 * No need to wake up other CPUs if the thread we just enqueued
	 * is bound.
	 */
	if (bound || ncpus == 1)
		return;

	/*
	 * See if there's any other halted CPUs. If there are, then
	 * select one, and awaken it.
	 * It's possible that after we find a CPU, somebody else
	 * will awaken it before we get the chance.
	 * In that case, look again.
	 */
	do {
		cpu_found = bitset_find(&cpu_part->cp_haltset);
		if (cpu_found == (uint_t)-1)
			return;
	} while (bitset_atomic_test_and_del(&cpu_part->cp_haltset,
	    cpu_found) < 0);

	/*
	 * Do not check if cpu_found is ourself as monitor/mwait
	 * wakeup is cheap.
	 */
	MWAIT_WAKEUP(cpu_seq[cpu_found]); /* write to monitored line */
}

#endif

void (*cpu_pause_handler)(volatile char *) = NULL;

static int
mp_disable_intr(int cpun)
{
	/*
	 * switch to the offline cpu
	 */
	affinity_set(cpun);
	/*
	 * raise ipl to just below cross call
	 */
	splx(XC_SYS_PIL - 1);
	/*
	 *	set base spl to prevent the next swtch to idle from
	 *	lowering back to ipl 0
	 */
	CPU->cpu_intr_actv |= (1 << (XC_SYS_PIL - 1));
	set_base_spl();
	affinity_clear();
	return (DDI_SUCCESS);
}

static void
mp_enable_intr(int cpun)
{
	/*
	 * switch to the online cpu
	 */
	affinity_set(cpun);
	/*
	 * clear the interrupt active mask
	 */
	CPU->cpu_intr_actv &= ~(1 << (XC_SYS_PIL - 1));
	set_base_spl();
	(void) spl0();
	affinity_clear();
}

static void
mach_get_platform(int owner)
{
	void		**srv_opsp;
	void		**clt_opsp;
	int		i;
	int		total_ops;

	/* fix up psm ops */
	srv_opsp = (void **)mach_set[0];
	clt_opsp = (void **)mach_set[owner];
	if (mach_ver[owner] == (ushort_t)PSM_INFO_VER01)
		total_ops = sizeof (struct psm_ops_ver01) /
		    sizeof (void (*)(void));
	else if (mach_ver[owner] == (ushort_t)PSM_INFO_VER01_1)
		/* no psm_notify_func */
		total_ops = OFFSETOF(struct psm_ops, psm_notify_func) /
		    sizeof (void (*)(void));
	else if (mach_ver[owner] == (ushort_t)PSM_INFO_VER01_2)
		/* no psm_timer funcs */
		total_ops = OFFSETOF(struct psm_ops, psm_timer_reprogram) /
		    sizeof (void (*)(void));
	else if (mach_ver[owner] == (ushort_t)PSM_INFO_VER01_3)
		/* no psm_preshutdown function */
		total_ops = OFFSETOF(struct psm_ops, psm_preshutdown) /
		    sizeof (void (*)(void));
	else if (mach_ver[owner] == (ushort_t)PSM_INFO_VER01_4)
		/* no psm_intr_ops function */
		total_ops = OFFSETOF(struct psm_ops, psm_intr_ops) /
		    sizeof (void (*)(void));
	else if (mach_ver[owner] == (ushort_t)PSM_INFO_VER01_5)
		/* no psm_state function */
		total_ops = OFFSETOF(struct psm_ops, psm_state) /
		    sizeof (void (*)(void));
	else if (mach_ver[owner] == (ushort_t)PSM_INFO_VER01_6)
		/* no psm_cpu_ops function */
		total_ops = OFFSETOF(struct psm_ops, psm_cpu_ops) /
		    sizeof (void (*)(void));
	else
		total_ops = sizeof (struct psm_ops) / sizeof (void (*)(void));

	/*
	 * Save the version of the PSM module, in case we need to
	 * behave differently based on version.
	 */
	mach_ver[0] = mach_ver[owner];

	for (i = 0; i < total_ops; i++)
		if (clt_opsp[i] != NULL)
			srv_opsp[i] = clt_opsp[i];
}

static void
mach_construct_info()
{
	struct psm_sw *swp;
	int	mach_cnt[PSM_OWN_OVERRIDE+1] = {0};
	int	conflict_owner = 0;

	if (psmsw->psw_forw == psmsw)
		panic("No valid PSM modules found");
	mutex_enter(&psmsw_lock);
	for (swp = psmsw->psw_forw; swp != psmsw; swp = swp->psw_forw) {
		if (!(swp->psw_flag & PSM_MOD_IDENTIFY))
			continue;
		mach_set[swp->psw_infop->p_owner] = swp->psw_infop->p_ops;
		mach_ver[swp->psw_infop->p_owner] = swp->psw_infop->p_version;
		mach_cnt[swp->psw_infop->p_owner]++;
	}
	mutex_exit(&psmsw_lock);

	mach_get_platform(PSM_OWN_SYS_DEFAULT);

	/* check to see are there any conflicts */
	if (mach_cnt[PSM_OWN_EXCLUSIVE] > 1)
		conflict_owner = PSM_OWN_EXCLUSIVE;
	if (mach_cnt[PSM_OWN_OVERRIDE] > 1)
		conflict_owner = PSM_OWN_OVERRIDE;
	if (conflict_owner) {
		/* remove all psm modules except uppc */
		cmn_err(CE_WARN,
		    "Conflicts detected on the following PSM modules:");
		mutex_enter(&psmsw_lock);
		for (swp = psmsw->psw_forw; swp != psmsw; swp = swp->psw_forw) {
			if (swp->psw_infop->p_owner == conflict_owner)
				cmn_err(CE_WARN, "%s ",
				    swp->psw_infop->p_mach_idstring);
		}
		mutex_exit(&psmsw_lock);
		cmn_err(CE_WARN,
		    "Setting the system back to SINGLE processor mode!");
		cmn_err(CE_WARN,
		    "Please edit /etc/mach to remove the invalid PSM module.");
		return;
	}

	if (mach_set[PSM_OWN_EXCLUSIVE])
		mach_get_platform(PSM_OWN_EXCLUSIVE);

	if (mach_set[PSM_OWN_OVERRIDE])
		mach_get_platform(PSM_OWN_OVERRIDE);
}

static void
mach_init()
{
	struct psm_ops  *pops;

	mach_construct_info();

	pops = mach_set[0];

	/* register the interrupt and clock initialization rotuines */
	picinitf = mach_picinit;
	clkinitf = mach_clkinit;
	psm_get_clockirq = pops->psm_get_clockirq;

	/* register the interrupt setup code */
	slvltovect = mach_softlvl_to_vect;
	addspl	= pops->psm_addspl;
	delspl	= pops->psm_delspl;

	if (pops->psm_translate_irq)
		psm_translate_irq = pops->psm_translate_irq;
	if (pops->psm_intr_ops)
		psm_intr_ops = pops->psm_intr_ops;

#if defined(PSMI_1_2) || defined(PSMI_1_3) || defined(PSMI_1_4)
	/*
	 * Time-of-day functionality now handled in TOD modules.
	 * (Warn about PSM modules that think that we're going to use
	 * their ops vectors.)
	 */
	if (pops->psm_tod_get)
		cmn_err(CE_WARN, "obsolete psm_tod_get op %p",
		    (void *)pops->psm_tod_get);

	if (pops->psm_tod_set)
		cmn_err(CE_WARN, "obsolete psm_tod_set op %p",
		    (void *)pops->psm_tod_set);
#endif

	if (pops->psm_notify_error) {
		psm_notify_error = mach_notify_error;
		notify_error = pops->psm_notify_error;
	}

	(*pops->psm_softinit)();

	/*
	 * Initialize the dispatcher's function hooks to enable CPU halting
	 * when idle.  Set both the deep-idle and non-deep-idle hooks.
	 *
	 * Assume we can use power saving deep-idle loop cpu_idle_adaptive.
	 * Platform deep-idle driver will reset our idle loop to
	 * non_deep_idle_cpu if power saving deep-idle feature is not available.
	 *
	 * Do not use monitor/mwait if idle_cpu_use_hlt is not set(spin idle)
	 * or idle_cpu_prefer_mwait is not set.
	 * Allocate monitor/mwait buffer for cpu0.
	 */
#ifndef __xpv
	non_deep_idle_disp_enq_thread = disp_enq_thread;
#endif
	if (idle_cpu_use_hlt) {
		idle_cpu = cpu_idle_adaptive;
		CPU->cpu_m.mcpu_idle_cpu = cpu_idle;
#ifndef __xpv
		if (is_x86_feature(x86_featureset, X86FSET_MWAIT) &&
		    idle_cpu_prefer_mwait) {
			CPU->cpu_m.mcpu_mwait = cpuid_mwait_alloc(CPU);
			/*
			 * Protect ourself from insane mwait size.
			 */
			if (CPU->cpu_m.mcpu_mwait == NULL) {
#ifdef DEBUG
				cmn_err(CE_NOTE, "Using hlt idle.  Cannot "
				    "handle cpu 0 mwait size.");
#endif
				idle_cpu_prefer_mwait = 0;
				CPU->cpu_m.mcpu_idle_cpu = cpu_idle;
			} else {
				CPU->cpu_m.mcpu_idle_cpu = cpu_idle_mwait;
			}
		} else {
			CPU->cpu_m.mcpu_idle_cpu = cpu_idle;
		}
		non_deep_idle_cpu = CPU->cpu_m.mcpu_idle_cpu;

		/*
		 * Disable power saving deep idle loop?
		 */
		if (idle_cpu_no_deep_c) {
			idle_cpu = non_deep_idle_cpu;
		}
#endif
	}

	mach_smpinit();
}

static void
mach_smpinit(void)
{
	struct psm_ops  *pops;
	processorid_t cpu_id;
	int cnt;
	cpuset_t cpumask;

	pops = mach_set[0];
	CPUSET_ZERO(cpumask);

	cpu_id = -1;
	cpu_id = (*pops->psm_get_next_processorid)(cpu_id);
	/*
	 * Only add boot_ncpus CPUs to mp_cpus. Other CPUs will be handled
	 * by CPU DR driver at runtime.
	 */
	for (cnt = 0; cpu_id != -1 && cnt < boot_ncpus; cnt++) {
		CPUSET_ADD(cpumask, cpu_id);
		cpu_id = (*pops->psm_get_next_processorid)(cpu_id);
	}

	mp_cpus = cpumask;

	/* MP related routines */
	ap_mlsetup = pops->psm_post_cpu_start;
	send_dirintf = pops->psm_send_ipi;

	/* optional MP related routines */
	if (pops->psm_shutdown)
		psm_shutdownf = pops->psm_shutdown;
	if (pops->psm_preshutdown)
		psm_preshutdownf = pops->psm_preshutdown;
	if (pops->psm_notify_func)
		psm_notifyf = pops->psm_notify_func;
	if (pops->psm_set_idlecpu)
		psm_set_idle_cpuf = pops->psm_set_idlecpu;
	if (pops->psm_unset_idlecpu)
		psm_unset_idle_cpuf = pops->psm_unset_idlecpu;

	psm_clkinit = pops->psm_clkinit;

	if (pops->psm_timer_reprogram)
		psm_timer_reprogram = pops->psm_timer_reprogram;

	if (pops->psm_timer_enable)
		psm_timer_enable = pops->psm_timer_enable;

	if (pops->psm_timer_disable)
		psm_timer_disable = pops->psm_timer_disable;

	if (pops->psm_post_cyclic_setup)
		psm_post_cyclic_setup = pops->psm_post_cyclic_setup;

	if (pops->psm_state)
		psm_state = pops->psm_state;

	/*
	 * Set these vectors here so they can be used by Suspend/Resume
	 * on UP machines.
	 */
	if (pops->psm_disable_intr)
		psm_disable_intr = pops->psm_disable_intr;
	if (pops->psm_enable_intr)
		psm_enable_intr  = pops->psm_enable_intr;

	/* check for multiple CPUs */
	if (cnt < 2 && plat_dr_support_cpu() == B_FALSE)
		return;

	/* check for MP platforms */
	if (pops->psm_cpu_start == NULL)
		return;

	/*
	 * Set the dispatcher hook to enable cpu "wake up"
	 * when a thread becomes runnable.
	 */
	if (idle_cpu_use_hlt) {
		disp_enq_thread = cpu_wakeup;
#ifndef __xpv
		if (is_x86_feature(x86_featureset, X86FSET_MWAIT) &&
		    idle_cpu_prefer_mwait)
			disp_enq_thread = cpu_wakeup_mwait;
		non_deep_idle_disp_enq_thread = disp_enq_thread;
#endif
	}

	psm_get_ipivect = pops->psm_get_ipivect;

	(void) add_avintr((void *)NULL, XC_HI_PIL, xc_serv, "xc_intr",
	    (*pops->psm_get_ipivect)(XC_HI_PIL, PSM_INTR_IPI_HI),
	    NULL, NULL, NULL, NULL);

	(void) (*pops->psm_get_ipivect)(XC_CPUPOKE_PIL, PSM_INTR_POKE);
}

static void
mach_picinit()
{
	struct psm_ops  *pops;

	pops = mach_set[0];

	/* register the interrupt handlers */
	setlvl = pops->psm_intr_enter;
	setlvlx = pops->psm_intr_exit;

	/* initialize the interrupt hardware */
	(*pops->psm_picinit)();

	/* set interrupt mask for current ipl */
	setspl = pops->psm_setspl;
	cli();
	setspl(CPU->cpu_pri);
}

uint_t	cpu_freq;	/* MHz */
uint64_t cpu_freq_hz;	/* measured (in hertz) */

#define	MEGA_HZ		1000000

#ifdef __xpv

int xpv_cpufreq_workaround = 1;
int xpv_cpufreq_verbose = 0;

#else	/* __xpv */

static uint64_t
mach_calchz(uint32_t pit_counter, uint64_t *processor_clks)
{
	uint64_t cpu_hz;

	if ((pit_counter == 0) || (*processor_clks == 0) ||
	    (*processor_clks > (((uint64_t)-1) / PIT_HZ)))
		return (0);

	cpu_hz = ((uint64_t)PIT_HZ * *processor_clks) / pit_counter;

	return (cpu_hz);
}

#endif	/* __xpv */

static uint64_t
mach_getcpufreq(void)
{
#if defined(__xpv)
	vcpu_time_info_t *vti = &CPU->cpu_m.mcpu_vcpu_info->time;
	uint64_t cpu_hz;

	/*
	 * During dom0 bringup, it was noted that on at least one older
	 * Intel HT machine, the hypervisor initially gives a tsc_to_system_mul
	 * value that is quite wrong (the 3.06GHz clock was reported
	 * as 4.77GHz)
	 *
	 * The curious thing is, that if you stop the kernel at entry,
	 * breakpoint here and inspect the value with kmdb, the value
	 * is correct - but if you don't stop and simply enable the
	 * printf statement (below), you can see the bad value printed
	 * here.  Almost as if something kmdb did caused the hypervisor to
	 * figure it out correctly.  And, note that the hypervisor
	 * eventually -does- figure it out correctly ... if you look at
	 * the field later in the life of dom0, it is correct.
	 *
	 * For now, on dom0, we employ a slightly cheesy workaround of
	 * using the DOM0_PHYSINFO hypercall.
	 */
	if (DOMAIN_IS_INITDOMAIN(xen_info) && xpv_cpufreq_workaround) {
		cpu_hz = 1000 * xpv_cpu_khz();
	} else {
		cpu_hz = (UINT64_C(1000000000) << 32) / vti->tsc_to_system_mul;

		if (vti->tsc_shift < 0)
			cpu_hz <<= -vti->tsc_shift;
		else
			cpu_hz >>= vti->tsc_shift;
	}

	if (xpv_cpufreq_verbose)
		printf("mach_getcpufreq: system_mul 0x%x, shift %d, "
		    "cpu_hz %" PRId64 "Hz\n",
		    vti->tsc_to_system_mul, vti->tsc_shift, cpu_hz);

	return (cpu_hz);
#else	/* __xpv */
	uint32_t pit_counter;
	uint64_t processor_clks;

	if (is_x86_feature(x86_featureset, X86FSET_TSC)) {
		/*
		 * We have a TSC. freq_tsc() knows how to measure the number
		 * of clock cycles sampled against the PIT.
		 */
		ulong_t flags = clear_int_flag();
		processor_clks = freq_tsc(&pit_counter);
		restore_int_flag(flags);
		return (mach_calchz(pit_counter, &processor_clks));
	} else if (x86_vendor == X86_VENDOR_Cyrix || x86_type == X86_TYPE_P5) {
#if defined(__amd64)
		panic("mach_getcpufreq: no TSC!");
#elif defined(__i386)
		/*
		 * We are a Cyrix based on a 6x86 core or an Intel Pentium
		 * for which freq_notsc() knows how to measure the number of
		 * elapsed clock cycles sampled against the PIT
		 */
		ulong_t flags = clear_int_flag();
		processor_clks = freq_notsc(&pit_counter);
		restore_int_flag(flags);
		return (mach_calchz(pit_counter, &processor_clks));
#endif	/* __i386 */
	}

	/* We do not know how to calculate cpu frequency for this cpu. */
	return (0);
#endif	/* __xpv */
}

/*
 * If the clock speed of a cpu is found to be reported incorrectly, do not add
 * to this array, instead improve the accuracy of the algorithm that determines
 * the clock speed of the processor or extend the implementation to support the
 * vendor as appropriate. This is here only to support adjusting the speed on
 * older slower processors that mach_fixcpufreq() would not be able to account
 * for otherwise.
 */
static int x86_cpu_freq[] = { 60, 75, 80, 90, 120, 160, 166, 175, 180, 233 };

/*
 * On fast processors the clock frequency that is measured may be off by
 * a few MHz from the value printed on the part. This is a combination of
 * the factors that for such fast parts being off by this much is within
 * the tolerances for manufacture and because of the difficulties in the
 * measurement that can lead to small error. This function uses some
 * heuristics in order to tweak the value that was measured to match what
 * is most likely printed on the part.
 *
 * Some examples:
 * 	AMD Athlon 1000 mhz measured as 998 mhz
 * 	Intel Pentium III Xeon 733 mhz measured as 731 mhz
 * 	Intel Pentium IV 1500 mhz measured as 1495mhz
 *
 * If in the future this function is no longer sufficient to correct
 * for the error in the measurement, then the algorithm used to perform
 * the measurement will have to be improved in order to increase accuracy
 * rather than adding horrible and questionable kludges here.
 *
 * This is called after the cyclics subsystem because of the potential
 * that the heuristics within may give a worse estimate of the clock
 * frequency than the value that was measured.
 */
static void
mach_fixcpufreq(void)
{
	uint32_t freq, mul, near66, delta66, near50, delta50, fixed, delta, i;

	freq = (uint32_t)cpu_freq;

	/*
	 * Find the nearest integer multiple of 200/3 (about 66) MHz to the
	 * measured speed taking into account that the 667 MHz parts were
	 * the first to round-up.
	 */
	mul = (uint32_t)((3 * (uint64_t)freq + 100) / 200);
	near66 = (uint32_t)((200 * (uint64_t)mul + ((mul >= 10) ? 1 : 0)) / 3);
	delta66 = (near66 > freq) ? (near66 - freq) : (freq - near66);

	/* Find the nearest integer multiple of 50 MHz to the measured speed */
	mul = (freq + 25) / 50;
	near50 = mul * 50;
	delta50 = (near50 > freq) ? (near50 - freq) : (freq - near50);

	/* Find the closer of the two */
	if (delta66 < delta50) {
		fixed = near66;
		delta = delta66;
	} else {
		fixed = near50;
		delta = delta50;
	}

	if (fixed > INT_MAX)
		return;

	/*
	 * Some older parts have a core clock frequency that is not an
	 * integral multiple of 50 or 66 MHz. Check if one of the old
	 * clock frequencies is closer to the measured value than any
	 * of the integral multiples of 50 an 66, and if so set fixed
	 * and delta appropriately to represent the closest value.
	 */
	i = sizeof (x86_cpu_freq) / sizeof (int);
	while (i > 0) {
		i--;

		if (x86_cpu_freq[i] <= freq) {
			mul = freq - x86_cpu_freq[i];

			if (mul < delta) {
				fixed = x86_cpu_freq[i];
				delta = mul;
			}

			break;
		}

		mul = x86_cpu_freq[i] - freq;

		if (mul < delta) {
			fixed = x86_cpu_freq[i];
			delta = mul;
		}
	}

	/*
	 * Set a reasonable maximum for how much to correct the measured
	 * result by. This check is here to prevent the adjustment made
	 * by this function from being more harm than good. It is entirely
	 * possible that in the future parts will be made that are not
	 * integral multiples of 66 or 50 in clock frequency or that
	 * someone may overclock a part to some odd frequency. If the
	 * measured value is farther from the corrected value than
	 * allowed, then assume the corrected value is in error and use
	 * the measured value.
	 */
	if (6 < delta)
		return;

	cpu_freq = (int)fixed;
}


static int
machhztomhz(uint64_t cpu_freq_hz)
{
	uint64_t cpu_mhz;

	/* Round to nearest MHZ */
	cpu_mhz = (cpu_freq_hz + (MEGA_HZ / 2)) / MEGA_HZ;

	if (cpu_mhz > INT_MAX)
		return (0);

	return ((int)cpu_mhz);

}


static int
mach_clkinit(int preferred_mode, int *set_mode)
{
	struct psm_ops  *pops;
	int resolution;

	pops = mach_set[0];

	cpu_freq_hz = mach_getcpufreq();

	cpu_freq = machhztomhz(cpu_freq_hz);

	if (!is_x86_feature(x86_featureset, X86FSET_TSC) || (cpu_freq == 0))
		tsc_gethrtime_enable = 0;

#ifndef __xpv
	if (tsc_gethrtime_enable) {
		tsc_hrtimeinit(cpu_freq_hz);
	} else
#endif
	{
		if (pops->psm_hrtimeinit)
			(*pops->psm_hrtimeinit)();
		gethrtimef = pops->psm_gethrtime;
		gethrtimeunscaledf = gethrtimef;
		/* scalehrtimef will remain dummy */
	}

	mach_fixcpufreq();

	if (mach_ver[0] >= PSM_INFO_VER01_3) {
		if (preferred_mode == TIMER_ONESHOT) {

			resolution = (*pops->psm_clkinit)(0);
			if (resolution != 0)  {
				*set_mode = TIMER_ONESHOT;
				return (resolution);
			}
		}

		/*
		 * either periodic mode was requested or could not set to
		 * one-shot mode
		 */
		resolution = (*pops->psm_clkinit)(hz);
		/*
		 * psm should be able to do periodic, so we do not check
		 * for return value of psm_clkinit here.
		 */
		*set_mode = TIMER_PERIODIC;
		return (resolution);
	} else {
		/*
		 * PSMI interface prior to PSMI_3 does not define a return
		 * value for psm_clkinit, so the return value is ignored.
		 */
		(void) (*pops->psm_clkinit)(hz);
		*set_mode = TIMER_PERIODIC;
		return (nsec_per_tick);
	}
}


/*ARGSUSED*/
static int
mach_softlvl_to_vect(int ipl)
{
	setsoftint = av_set_softint_pending;
	kdisetsoftint = kdi_av_set_softint_pending;

	return (PSM_SV_SOFTWARE);
}

#ifdef DEBUG
/*
 * This is here to allow us to simulate cpus that refuse to start.
 */
cpuset_t cpufailset;
#endif

int
mach_cpu_start(struct cpu *cp, void *ctx)
{
	struct psm_ops *pops = mach_set[0];
	processorid_t id = cp->cpu_id;

#ifdef DEBUG
	if (CPU_IN_SET(cpufailset, id))
		return (0);
#endif
	return ((*pops->psm_cpu_start)(id, ctx));
}

int
mach_cpuid_start(processorid_t id, void *ctx)
{
	struct psm_ops *pops = mach_set[0];

#ifdef DEBUG
	if (CPU_IN_SET(cpufailset, id))
		return (0);
#endif
	return ((*pops->psm_cpu_start)(id, ctx));
}

int
mach_cpu_stop(cpu_t *cp, void *ctx)
{
	struct psm_ops *pops = mach_set[0];
	psm_cpu_request_t request;

	if (pops->psm_cpu_ops == NULL) {
		return (ENOTSUP);
	}

	ASSERT(cp->cpu_id != -1);
	request.pcr_cmd = PSM_CPU_STOP;
	request.req.cpu_stop.cpuid = cp->cpu_id;
	request.req.cpu_stop.ctx = ctx;

	return ((*pops->psm_cpu_ops)(&request));
}

int
mach_cpu_add(mach_cpu_add_arg_t *argp, processorid_t *cpuidp)
{
	int rc;
	struct psm_ops *pops = mach_set[0];
	psm_cpu_request_t request;

	if (pops->psm_cpu_ops == NULL) {
		return (ENOTSUP);
	}

	request.pcr_cmd = PSM_CPU_ADD;
	request.req.cpu_add.argp = argp;
	request.req.cpu_add.cpuid = -1;
	rc = (*pops->psm_cpu_ops)(&request);
	if (rc == 0) {
		ASSERT(request.req.cpu_add.cpuid != -1);
		*cpuidp = request.req.cpu_add.cpuid;
	}

	return (rc);
}

int
mach_cpu_remove(processorid_t cpuid)
{
	struct psm_ops *pops = mach_set[0];
	psm_cpu_request_t request;

	if (pops->psm_cpu_ops == NULL) {
		return (ENOTSUP);
	}

	request.pcr_cmd = PSM_CPU_REMOVE;
	request.req.cpu_remove.cpuid = cpuid;

	return ((*pops->psm_cpu_ops)(&request));
}

/*
 * Default handler to create device node for CPU.
 * One reference count will be held on created device node.
 */
static int
mach_cpu_create_devinfo(cpu_t *cp, dev_info_t **dipp)
{
	int rv, circ;
	dev_info_t *dip;
	static kmutex_t cpu_node_lock;
	static dev_info_t *cpu_nex_devi = NULL;

	ASSERT(cp != NULL);
	ASSERT(dipp != NULL);
	*dipp = NULL;

	if (cpu_nex_devi == NULL) {
		mutex_enter(&cpu_node_lock);
		/* First check whether cpus exists. */
		cpu_nex_devi = ddi_find_devinfo("cpus", -1, 0);
		/* Create cpus if it doesn't exist. */
		if (cpu_nex_devi == NULL) {
			ndi_devi_enter(ddi_root_node(), &circ);
			rv = ndi_devi_alloc(ddi_root_node(), "cpus",
			    (pnode_t)DEVI_SID_NODEID, &dip);
			if (rv != NDI_SUCCESS) {
				mutex_exit(&cpu_node_lock);
				cmn_err(CE_CONT,
				    "?failed to create cpu nexus device.\n");
				return (PSM_FAILURE);
			}
			ASSERT(dip != NULL);
			(void) ndi_devi_online(dip, 0);
			ndi_devi_exit(ddi_root_node(), circ);
			cpu_nex_devi = dip;
		}
		mutex_exit(&cpu_node_lock);
	}

	/*
	 * create a child node for cpu identified as 'cpu_id'
	 */
	ndi_devi_enter(cpu_nex_devi, &circ);
	dip = ddi_add_child(cpu_nex_devi, "cpu", DEVI_SID_NODEID, -1);
	if (dip == NULL) {
		cmn_err(CE_CONT,
		    "?failed to create device node for cpu%d.\n", cp->cpu_id);
		rv = PSM_FAILURE;
	} else {
		*dipp = dip;
		(void) ndi_hold_devi(dip);
		rv = PSM_SUCCESS;
	}
	ndi_devi_exit(cpu_nex_devi, circ);

	return (rv);
}

/*
 * Create cpu device node in device tree and online it.
 * Return created dip with reference count held if requested.
 */
int
mach_cpu_create_device_node(struct cpu *cp, dev_info_t **dipp)
{
	int rv;
	dev_info_t *dip = NULL;

	ASSERT(psm_cpu_create_devinfo != NULL);
	rv = psm_cpu_create_devinfo(cp, &dip);
	if (rv == PSM_SUCCESS) {
		cpuid_set_cpu_properties(dip, cp->cpu_id, cp->cpu_m.mcpu_cpi);
		/* Recursively attach driver for parent nexus device. */
		if (i_ddi_attach_node_hierarchy(ddi_get_parent(dip)) ==
		    DDI_SUCCESS) {
			/* Configure cpu itself and descendants. */
			(void) ndi_devi_online(dip,
			    NDI_ONLINE_ATTACH | NDI_CONFIG);
		}
		if (dipp != NULL) {
			*dipp = dip;
		} else {
			(void) ndi_rele_devi(dip);
		}
	}

	return (rv);
}

/*
 * The dipp contains one of following values on return:
 * - NULL if no device node found
 * - pointer to device node if found
 */
int
mach_cpu_get_device_node(struct cpu *cp, dev_info_t **dipp)
{
	*dipp = NULL;
	if (psm_cpu_get_devinfo != NULL) {
		if (psm_cpu_get_devinfo(cp, dipp) == PSM_SUCCESS) {
			return (PSM_SUCCESS);
		}
	}

	return (PSM_FAILURE);
}

/*ARGSUSED*/
static int
mach_translate_irq(dev_info_t *dip, int irqno)
{
	return (irqno);	/* default to NO translation */
}

static void
mach_notify_error(int level, char *errmsg)
{
	/*
	 * SL_FATAL is pass in once panicstr is set, deliver it
	 * as CE_PANIC.  Also, translate SL_ codes back to CE_
	 * codes for the psmi handler
	 */
	if (level & SL_FATAL)
		(*notify_error)(CE_PANIC, errmsg);
	else if (level & SL_WARN)
		(*notify_error)(CE_WARN, errmsg);
	else if (level & SL_NOTE)
		(*notify_error)(CE_NOTE, errmsg);
	else if (level & SL_CONSOLE)
		(*notify_error)(CE_CONT, errmsg);
}

/*
 * It provides the default basic intr_ops interface for the new DDI
 * interrupt framework if the PSM doesn't have one.
 *
 * Input:
 * dip     - pointer to the dev_info structure of the requested device
 * hdlp    - pointer to the internal interrupt handle structure for the
 *	     requested interrupt
 * intr_op - opcode for this call
 * result  - pointer to the integer that will hold the result to be
 *	     passed back if return value is PSM_SUCCESS
 *
 * Output:
 * return value is either PSM_SUCCESS or PSM_FAILURE
 */
static int
mach_intr_ops(dev_info_t *dip, ddi_intr_handle_impl_t *hdlp,
    psm_intr_op_t intr_op, int *result)
{
	struct intrspec *ispec;

	switch (intr_op) {
	case PSM_INTR_OP_CHECK_MSI:
		*result = hdlp->ih_type & ~(DDI_INTR_TYPE_MSI |
		    DDI_INTR_TYPE_MSIX);
		break;
	case PSM_INTR_OP_ALLOC_VECTORS:
		if (hdlp->ih_type == DDI_INTR_TYPE_FIXED)
			*result = 1;
		else
			*result = 0;
		break;
	case PSM_INTR_OP_FREE_VECTORS:
		break;
	case PSM_INTR_OP_NAVAIL_VECTORS:
		if (hdlp->ih_type == DDI_INTR_TYPE_FIXED)
			*result = 1;
		else
			*result = 0;
		break;
	case PSM_INTR_OP_XLATE_VECTOR:
		ispec = ((ihdl_plat_t *)hdlp->ih_private)->ip_ispecp;
		*result = psm_translate_irq(dip, ispec->intrspec_vec);
		break;
	case PSM_INTR_OP_GET_CAP:
		*result = 0;
		break;
	case PSM_INTR_OP_GET_PENDING:
	case PSM_INTR_OP_CLEAR_MASK:
	case PSM_INTR_OP_SET_MASK:
	case PSM_INTR_OP_GET_SHARED:
	case PSM_INTR_OP_SET_PRI:
	case PSM_INTR_OP_SET_CAP:
	case PSM_INTR_OP_SET_CPU:
	case PSM_INTR_OP_GET_INTR:
	default:
		return (PSM_FAILURE);
	}
	return (PSM_SUCCESS);
}
/*
 * Return 1 if CMT load balancing policies should be
 * implemented across instances of the specified hardware
 * sharing relationship.
 */
int
pg_cmt_load_bal_hw(pghw_type_t hw)
{
	if (hw == PGHW_IPIPE ||
	    hw == PGHW_FPU ||
	    hw == PGHW_PROCNODE ||
	    hw == PGHW_CHIP)
		return (1);
	else
		return (0);
}
/*
 * Return 1 if thread affinity polices should be implemented
 * for instances of the specifed hardware sharing relationship.
 */
int
pg_cmt_affinity_hw(pghw_type_t hw)
{
	if (hw == PGHW_CACHE)
		return (1);
	else
		return (0);
}

/*
 * Return number of counter events requested to measure hardware capacity and
 * utilization and setup CPC requests for specified CPU as needed
 *
 * May return 0 when platform or processor specific code knows that no CPC
 * events should be programmed on this CPU or -1 when platform or processor
 * specific code doesn't know which counter events are best to use and common
 * code should decide for itself
 */
int
/* LINTED E_FUNC_ARG_UNUSED */
cu_plat_cpc_init(cpu_t *cp, kcpc_request_list_t *reqs, int nreqs)
{
	const char	*impl_name;

	/*
	 * Return error if pcbe_ops not set
	 */
	if (pcbe_ops == NULL)
		return (-1);

	/*
	 * Return that no CPC events should be programmed on hyperthreaded
	 * Pentium 4 and return error for all other x86 processors to tell
	 * common code to decide what counter events to program on those CPUs
	 * for measuring hardware capacity and utilization
	 */
	impl_name = pcbe_ops->pcbe_impl_name();
	if (impl_name != NULL && strcmp(impl_name, PCBE_IMPL_NAME_P4HT) == 0)
		return (0);
	else
		return (-1);
}