xref: /illumos-gate/usr/src/uts/sun4u/sys/machclock.h (revision 4f60987d)
1 /*
2  * CDDL HEADER START
3  *
4  * The contents of this file are subject to the terms of the
5  * Common Development and Distribution License (the "License").
6  * You may not use this file except in compliance with the License.
7  *
8  * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9  * or http://www.opensolaris.org/os/licensing.
10  * See the License for the specific language governing permissions
11  * and limitations under the License.
12  *
13  * When distributing Covered Code, include this CDDL HEADER in each
14  * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15  * If applicable, add the following below this CDDL HEADER, with the
16  * fields enclosed by brackets "[]" replaced with your own identifying
17  * information: Portions Copyright [yyyy] [name of copyright owner]
18  *
19  * CDDL HEADER END
20  */
21 /*
22  * Copyright 2009 Sun Microsystems, Inc.  All rights reserved.
23  * Use is subject to license terms.
24  */
25 
26 #ifndef _SYS_MACHCLOCK_H
27 #define	_SYS_MACHCLOCK_H
28 
29 #ifdef	__cplusplus
30 extern "C" {
31 #endif
32 
33 #ifdef _ASM
34 /*
35  * Macro to clear the NPT (non-privileged trap) bit in the %tick/%stick
36  * register.  Uses %g1-%g4.
37  */
38 #define	CLEARTICKNPT				\
39 	sethi	%hi(cpu_clearticknpt), %g1;	\
40 	jmp	%g1 + %lo(cpu_clearticknpt);	\
41 	rd	%pc, %g4
42 
43 #define	RD_TICK_NO_SUSPEND_CHECK(out, scr1)	\
44 	rdpr	%tick, out;			\
45 	sllx	out, 1, out;			\
46 	srlx	out, 1, out;
47 
48 #define	RD_TICK(out, scr1, scr2, label)		\
49 	RD_TICK_NO_SUSPEND_CHECK(out, scr1);
50 
51 #endif /* _ASM */
52 
53 #if defined(CPU_MODULE)
54 
55 /*
56  * Constants used to convert hi-res timestamps into nanoseconds
57  * (see <sys/clock.h> file for more information)
58  */
59 
60 #if defined(CHEETAH) || defined(HUMMINGBIRD) || defined(OLYMPUS_C)
61 
62 /*
63  * At least 3.9MHz, for slower %stick-based systems.
64  */
65 #define	NSEC_SHIFT	8
66 
67 #elif defined(SPITFIRE)
68 
69 /*
70  * At least 62.5 MHz, for faster %tick-based systems.
71  */
72 #define	NSEC_SHIFT	4
73 #define	VTRACE_SHIFT	4
74 
75 #else
76 #error "Compiling for CPU_MODULE but no CPU specified"
77 #endif
78 
79 /*
80  * NOTE: the macros below assume that the various time-related variables
81  * (hrestime, hrestime_adj, hres_last_tick, timedelta, nsec_scale, etc)
82  * are all stored together on a 64-byte boundary.  The primary motivation
83  * is cache performance, but we also take advantage of a convenient side
84  * effect: these variables all have the same high 22 address bits, so only
85  * one sethi is needed to access them all.
86  */
87 
88 /*
89  * GET_HRESTIME() returns the value of hrestime, hrestime_adj and the
90  * number of nanoseconds since the last clock tick ('nslt').  It also
91  * sets 'nano' to the value NANOSEC (one billion).
92  *
93  * This macro assumes that all registers are globals or outs so they can
94  * safely contain 64-bit data, and that it's safe to use the label "5:".
95  * Further, this macro calls the NATIVE_TIME_TO_NSEC_SCALE which in turn
96  * uses the labels "6:" and "7:"; labels "5:", "6:" and "7:" must not
97  * be used across invocations of this macro.
98  */
99 #define	GET_HRESTIME(hrestsec, hrestnsec, adj, nslt, nano, scr, hrlock, \
100     gnt1, gnt2) \
101 5:	sethi	%hi(hres_lock), scr;					\
102 	lduw	[scr + %lo(hres_lock)], hrlock;	/* load clock lock */	\
103 	lduw	[scr + %lo(nsec_scale)], nano;	/* tick-to-ns factor */	\
104 	andn	hrlock, 1, hrlock;  	/* see comments above! */	\
105 	ldx	[scr + %lo(hres_last_tick)], nslt;			\
106 	ldn	[scr + %lo(hrestime)], hrestsec; /* load hrestime.sec */\
107 	add	scr, %lo(hrestime), hrestnsec;				\
108 	ldn	[hrestnsec + CLONGSIZE], hrestnsec;			\
109 	GET_NATIVE_TIME(adj, gnt1, gnt2);	/* get current %tick */	\
110 	subcc	adj, nslt, nslt; /* nslt = ticks since last clockint */	\
111 	movneg	%xcc, %g0, nslt; /* ignore neg delta from tick skew */	\
112 	ldx	[scr + %lo(hrestime_adj)], adj; /* load hrestime_adj */	\
113 	/* membar #LoadLoad; (see comment (2) above) */			\
114 	lduw	[scr + %lo(hres_lock)], scr; /* load clock lock */	\
115 	NATIVE_TIME_TO_NSEC_SCALE(nslt, nano, gnt1, NSEC_SHIFT);	\
116 	sethi	%hi(NANOSEC), nano;					\
117 	xor	hrlock, scr, scr;					\
118 /* CSTYLED */ 								\
119 	brnz,pn	scr, 5b;						\
120 	or	nano, %lo(NANOSEC), nano;
121 
122 /*
123  * Similar to above, but returns current gethrtime() value in 'base'.
124  */
125 #define	GET_HRTIME(base, now, nslt, scale, scr, hrlock, gnt1, gnt2)	\
126 5:	sethi	%hi(hres_lock), scr;					\
127 	lduw	[scr + %lo(hres_lock)], hrlock;	/* load clock lock */	\
128 	lduw	[scr + %lo(nsec_scale)], scale;	/* tick-to-ns factor */	\
129 	andn	hrlock, 1, hrlock;  	/* see comments above! */	\
130 	ldx	[scr + %lo(hres_last_tick)], nslt;			\
131 	ldx	[scr + %lo(hrtime_base)], base;	/* load hrtime_base */	\
132 	GET_NATIVE_TIME(now, gnt1, gnt2);	/* get current %tick */	\
133 	subcc	now, nslt, nslt; /* nslt = ticks since last clockint */	\
134 	movneg	%xcc, %g0, nslt; /* ignore neg delta from tick skew */	\
135 	/* membar #LoadLoad; (see comment (2) above) */			\
136 	ld	[scr + %lo(hres_lock)], scr; /* load clock lock */	\
137 	NATIVE_TIME_TO_NSEC_SCALE(nslt, scale, gnt1, NSEC_SHIFT);	\
138 	xor	hrlock, scr, scr;					\
139 /* CSTYLED */ 								\
140 	brnz,pn	scr, 5b;						\
141 	add	base, nslt, base;
142 
143 #endif /* CPU_MODULE */
144 
145 #ifndef _ASM
146 
147 #ifdef	_KERNEL
148 
149 /*
150  * Hardware watchdog variables and knobs
151  */
152 
153 #define	CLK_WATCHDOG_DEFAULT	10	/* 10 seconds */
154 
155 extern int	watchdog_enable;
156 extern int	watchdog_available;
157 extern int	watchdog_activated;
158 extern uint_t	watchdog_timeout_seconds;
159 
160 /*
161  * tod module name and operations
162  */
163 struct tod_ops {
164 	timestruc_t	(*tod_get)(void);
165 	void		(*tod_set)(timestruc_t);
166 	uint_t		(*tod_set_watchdog_timer)(uint_t);
167 	uint_t		(*tod_clear_watchdog_timer)(void);
168 	void		(*tod_set_power_alarm)(timestruc_t);
169 	void		(*tod_clear_power_alarm)(void);
170 	uint64_t	(*tod_get_cpufrequency)(void);
171 };
172 
173 extern struct tod_ops	tod_ops;
174 extern char		*tod_module_name;
175 
176 /*
177  * These defines allow common code to use TOD functions independant
178  * of hardware platform.
179  */
180 #define	TODOP_GET(top)		((top).tod_get())
181 #define	TODOP_SET(top, ts)	((top).tod_set(ts))
182 #define	TODOP_SETWD(top, nsec)	((top).tod_set_watchdog_timer(nsec))
183 #define	TODOP_CLRWD(top)	((top).tod_clear_watchdog_timer())
184 #define	TODOP_SETWAKE(top, ts)	((top).tod_set_power_alarm(ts))
185 #define	TODOP_CLRWAKE(top)	((top).tod_clear_power_alarm())
186 
187 #endif	/* _KERNEL */
188 
189 #endif	/* _ASM */
190 
191 #ifdef	__cplusplus
192 }
193 #endif
194 
195 #endif	/* !_SYS_MACHCLOCK_H */
196