1What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_sensing_mode
2Date:		August 2015
3KernelVersion:	4.2.0
4Contact:	source@cogentembedded.com
5Description:
6		Program sensor type for threshold detector inputs.
7		Could be either "GND-Open" or "Supply-Open" mode. Y is a
8		threshold detector input channel. Channels 0..7, 8..15, 16..23
9		and 24..31 has common sensor types.
10
11What:		/sys/bus/iio/devices/iio:deviceX/events/in_voltageY_thresh_falling_value
12Date:		August 2015
13KernelVersion:	4.2.0
14Contact:	source@cogentembedded.com
15Description:
16		Channel Y low voltage threshold. If sensor input voltage goes lower then
17		this value then the threshold falling event is pushed.
18		Depending on in_voltageY_sensing_mode the low voltage threshold
19		is separately set for "GND-Open" and "Supply-Open" modes.
20		Channels 0..31 have common low threshold values, but could have different
21		sensing_modes.
22		The low voltage threshold range is between 2..21V.
23		Hysteresis between low and high thresholds can not be lower then 2 and
24		can not be odd.
25		If falling threshold results hysteresis to odd value then rising
26		threshold is automatically subtracted by one.
27
28What:		/sys/bus/iio/devices/iio:deviceX/events/in_voltageY_thresh_rising_value
29Date:		August 2015
30KernelVersion:	4.2.0
31Contact:	source@cogentembedded.com
32Description:
33		Channel Y high voltage threshold. If sensor input voltage goes higher then
34		this value then the threshold rising event is pushed.
35		Depending on in_voltageY_sensing_mode the high voltage threshold
36		is separately set for "GND-Open" and "Supply-Open" modes.
37		Channels 0..31 have common high threshold values, but could have different
38		sensing_modes.
39		The high voltage threshold range is between 3..22V.
40		Hysteresis between low and high thresholds can not be lower then 2 and
41		can not be odd.
42		If rising threshold results hysteresis to odd value then falling
43		threshold is automatically appended by one.
44