1What:		/sys/bus/typec/devices/.../displayport/configuration
2Date:		July 2018
3Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
4Description:
5		Shows the current DisplayPort configuration for the connector.
6		Valid values are USB, source and sink. Source means DisplayPort
7		source, and sink means DisplayPort sink.
8
9		All supported configurations are listed as space separated list
10		with the active one wrapped in square brackets.
11
12		Source example:
13
14			USB [source] sink
15
16		The configuration can be changed by writing to the file
17
18		Note. USB configuration does not equal to Exit Mode. It is
19		separate configuration defined in VESA DisplayPort Alt Mode on
20		USB Type-C Standard. Functionally it equals to the situation
21		where the mode has been exited (to exit the mode, see
22		Documentation/ABI/testing/sysfs-bus-typec, and use file
23		/sys/bus/typec/devices/.../active).
24
25What:		/sys/bus/typec/devices/.../displayport/pin_assignment
26Date:		July 2018
27Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
28Description:
29		VESA DisplayPort Alt Mode on USB Type-C Standard defines six
30		different pin assignments for USB Type-C connector that are
31		labeled A, B, C, D, E, and F. The supported pin assignments are
32		listed as space separated list with the active one wrapped in
33		square brackets.
34
35		Example:
36
37			C [D]
38
39		Pin assignment can be changed by writing to the file. It is
40		possible to set pin assignment before configuration has been
41		set, but the assignment will not be active before the
42		connector is actually configured.
43
44		Note. As of VESA DisplayPort Alt Mode on USB Type-C Standard
45		version 1.0b, pin assignments A, B, and F are deprecated. Only
46		pin assignment D can now carry simultaneously one channel of
47		USB SuperSpeed protocol. From user perspective pin assignments C
48		and E are equal, where all channels on the connector are used
49		for carrying DisplayPort protocol (allowing higher resolutions).
50