1.. _memory_hotplug:
2
3==============
4Memory hotplug
5==============
6
7Memory hotplug event notifier
8=============================
9
10Hotplugging events are sent to a notification queue.
11
12There are six types of notification defined in ``include/linux/memory.h``:
13
14MEM_GOING_ONLINE
15  Generated before new memory becomes available in order to be able to
16  prepare subsystems to handle memory. The page allocator is still unable
17  to allocate from the new memory.
18
19MEM_CANCEL_ONLINE
20  Generated if MEM_GOING_ONLINE fails.
21
22MEM_ONLINE
23  Generated when memory has successfully brought online. The callback may
24  allocate pages from the new memory.
25
26MEM_GOING_OFFLINE
27  Generated to begin the process of offlining memory. Allocations are no
28  longer possible from the memory but some of the memory to be offlined
29  is still in use. The callback can be used to free memory known to a
30  subsystem from the indicated memory block.
31
32MEM_CANCEL_OFFLINE
33  Generated if MEM_GOING_OFFLINE fails. Memory is available again from
34  the memory block that we attempted to offline.
35
36MEM_OFFLINE
37  Generated after offlining memory is complete.
38
39A callback routine can be registered by calling::
40
41  hotplug_memory_notifier(callback_func, priority)
42
43Callback functions with higher values of priority are called before callback
44functions with lower values.
45
46A callback function must have the following prototype::
47
48  int callback_func(
49    struct notifier_block *self, unsigned long action, void *arg);
50
51The first argument of the callback function (self) is a pointer to the block
52of the notifier chain that points to the callback function itself.
53The second argument (action) is one of the event types described above.
54The third argument (arg) passes a pointer of struct memory_notify::
55
56	struct memory_notify {
57		unsigned long start_pfn;
58		unsigned long nr_pages;
59		int status_change_nid_normal;
60		int status_change_nid_high;
61		int status_change_nid;
62	}
63
64- start_pfn is start_pfn of online/offline memory.
65- nr_pages is # of pages of online/offline memory.
66- status_change_nid_normal is set node id when N_NORMAL_MEMORY of nodemask
67  is (will be) set/clear, if this is -1, then nodemask status is not changed.
68- status_change_nid_high is set node id when N_HIGH_MEMORY of nodemask
69  is (will be) set/clear, if this is -1, then nodemask status is not changed.
70- status_change_nid is set node id when N_MEMORY of nodemask is (will be)
71  set/clear. It means a new(memoryless) node gets new memory by online and a
72  node loses all memory. If this is -1, then nodemask status is not changed.
73
74  If status_changed_nid* >= 0, callback should create/discard structures for the
75  node if necessary.
76
77The callback routine shall return one of the values
78NOTIFY_DONE, NOTIFY_OK, NOTIFY_BAD, NOTIFY_STOP
79defined in ``include/linux/notifier.h``
80
81NOTIFY_DONE and NOTIFY_OK have no effect on the further processing.
82
83NOTIFY_BAD is used as response to the MEM_GOING_ONLINE, MEM_GOING_OFFLINE,
84MEM_ONLINE, or MEM_OFFLINE action to cancel hotplugging. It stops
85further processing of the notification queue.
86
87NOTIFY_STOP stops further processing of the notification queue.
88
89Locking Internals
90=================
91
92When adding/removing memory that uses memory block devices (i.e. ordinary RAM),
93the device_hotplug_lock should be held to:
94
95- synchronize against online/offline requests (e.g. via sysfs). This way, memory
96  block devices can only be accessed (.online/.state attributes) by user
97  space once memory has been fully added. And when removing memory, we
98  know nobody is in critical sections.
99- synchronize against CPU hotplug and similar (e.g. relevant for ACPI and PPC)
100
101Especially, there is a possible lock inversion that is avoided using
102device_hotplug_lock when adding memory and user space tries to online that
103memory faster than expected:
104
105- device_online() will first take the device_lock(), followed by
106  mem_hotplug_lock
107- add_memory_resource() will first take the mem_hotplug_lock, followed by
108  the device_lock() (while creating the devices, during bus_add_device()).
109
110As the device is visible to user space before taking the device_lock(), this
111can result in a lock inversion.
112
113onlining/offlining of memory should be done via device_online()/
114device_offline() - to make sure it is properly synchronized to actions
115via sysfs. Holding device_hotplug_lock is advised (to e.g. protect online_type)
116
117When adding/removing/onlining/offlining memory or adding/removing
118heterogeneous/device memory, we should always hold the mem_hotplug_lock in
119write mode to serialise memory hotplug (e.g. access to global/zone
120variables).
121
122In addition, mem_hotplug_lock (in contrast to device_hotplug_lock) in read
123mode allows for a quite efficient get_online_mems/put_online_mems
124implementation, so code accessing memory can protect from that memory
125vanishing.
126