1Binding for keystone PLLs. The main PLL IP typically has a multiplier,
2a divider and a post divider. The additional PLL IPs like ARMPLL, DDRPLL
3and PAPLL are controlled by the memory mapped register where as the Main
4PLL is controlled by a PLL controller registers along with memory mapped
5registers.
6
7This binding uses the common clock binding[1].
8
9[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
10
11Required properties:
12- #clock-cells : from common clock binding; shall be set to 0.
13- compatible : shall be "ti,keystone,main-pll-clock" or "ti,keystone,pll-clock"
14- clocks : parent clock phandle
15- reg - pll control0 and pll multiplier registers
16- reg-names : control, multiplier and post-divider. The multiplier and
17		post-divider registers are applicable only for main pll clock
18- fixed-postdiv : fixed post divider value. If absent, use clkod register bits
19		for postdiv
20
21Example:
22	mainpllclk: mainpllclk@2310110 {
23		#clock-cells = <0>;
24		compatible = "ti,keystone,main-pll-clock";
25		clocks = <&refclksys>;
26		reg = <0x02620350 4>, <0x02310110 4>, <0x02310108 4>;
27		reg-names = "control", "multiplier", "post-divider";
28		fixed-postdiv = <2>;
29	};
30
31	papllclk: papllclk@2620358 {
32		#clock-cells = <0>;
33		compatible = "ti,keystone,pll-clock";
34		clocks = <&refclkpass>;
35		clock-output-names = "pa-pll-clk";
36		reg = <0x02620358 4>;
37		reg-names = "control";
38	};
39
40Required properties:
41- #clock-cells : from common clock binding; shall be set to 0.
42- compatible : shall be "ti,keystone,pll-mux-clock"
43- clocks : link phandles of parent clocks
44- reg - pll mux register
45- bit-shift : number of bits to shift the bit-mask
46- bit-mask : arbitrary bitmask for programming the mux
47
48Optional properties:
49- clock-output-names : From common clock binding.
50
51Example:
52	mainmuxclk: mainmuxclk@2310108 {
53		#clock-cells = <0>;
54		compatible = "ti,keystone,pll-mux-clock";
55		clocks = <&mainpllclk>, <&refclkmain>;
56		reg = <0x02310108 4>;
57		bit-shift = <23>;
58		bit-mask = <1>;
59		clock-output-names = "mainmuxclk";
60	};
61
62Required properties:
63- #clock-cells : from common clock binding; shall be set to 0.
64- compatible : shall be "ti,keystone,pll-divider-clock"
65- clocks : parent clock phandle
66- reg - pll mux register
67- bit-shift : number of bits to shift the bit-mask
68- bit-mask : arbitrary bitmask for programming the divider
69
70Optional properties:
71- clock-output-names : From common clock binding.
72
73Example:
74	gemtraceclk: gemtraceclk@2310120 {
75		#clock-cells = <0>;
76		compatible = "ti,keystone,pll-divider-clock";
77		clocks = <&mainmuxclk>;
78		reg = <0x02310120 4>;
79		bit-shift = <0>;
80		bit-mask = <8>;
81		clock-output-names = "gemtraceclk";
82	};
83