1# SPDX-License-Identifier: GPL-2.0
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/clock/milbeaut-clock.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Milbeaut SoCs Clock Controller Binding
8
9maintainers:
10  - Taichi Sugaya <sugaya.taichi@socionext.com>
11
12description: |
13  Milbeaut SoCs Clock controller is an integrated clock controller, which
14  generates and supplies to all modules.
15
16  This binding uses common clock bindings
17  [1] Documentation/devicetree/bindings/clock/clock-bindings.txt
18
19properties:
20  compatible:
21    oneOf:
22      - items:
23          - enum:
24              - socionext,milbeaut-m10v-ccu
25  clocks:
26    maxItems: 1
27    description: external clock
28
29  '#clock-cells':
30    const: 1
31
32required:
33  - compatible
34  - reg
35  - clocks
36  - '#clock-cells'
37
38examples:
39  # Clock controller node:
40  - |
41    m10v-clk-ctrl@1d021000 {
42        compatible = "socionext,milbeaut-m10v-clk-ccu";
43        reg = <0x1d021000 0x4000>;
44        #clock-cells = <1>;
45        clocks = <&clki40mhz>;
46    };
47
48  # Required an external clock for Clock controller node:
49  - |
50    clocks {
51        clki40mhz: clki40mhz {
52            compatible = "fixed-clock";
53            #clock-cells = <0>;
54            clock-frequency = <40000000>;
55        };
56        /* other clocks */
57    };
58
59  # The clock consumer shall specify the desired clock-output of the clock
60  # controller as below by specifying output-id in its "clk" phandle cell.
61  # 2: uart
62  # 4: 32-bit timer
63  # 7: UHS-I/II
64  - |
65    serial@1e700010 {
66        compatible = "socionext,milbeaut-usio-uart";
67        reg = <0x1e700010 0x10>;
68        interrupts = <0 141 0x4>, <0 149 0x4>;
69        interrupt-names = "rx", "tx";
70        clocks = <&clk 2>;
71    };
72
73...
74