1J-Core Advanced Interrupt Controller
2
3Required properties:
4
5- compatible: Should be "jcore,aic1" for the (obsolete) first-generation aic
6  with 8 interrupt lines with programmable priorities, or "jcore,aic2" for
7  the "aic2" core with 64 interrupts.
8
9- reg: Memory region(s) for configuration. For SMP, there should be one
10  region per cpu, indexed by the sequential, zero-based hardware cpu
11  number.
12
13- interrupt-controller: Identifies the node as an interrupt controller
14
15- #interrupt-cells: Specifies the number of cells needed to encode an
16  interrupt source. The value shall be 1.
17
18
19Example:
20
21aic: interrupt-controller@200 {
22	compatible = "jcore,aic2";
23	reg = < 0x200 0x30 0x500 0x30 >;
24	interrupt-controller;
25	#interrupt-cells = <1>;
26};
27