1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/mfd/st,stmfx.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: STMicroelectonics Multi-Function eXpander (STMFX) bindings
8
9description: ST Multi-Function eXpander (STMFX) is a slave controller using I2C for
10               communication with the main MCU. Its main features are GPIO expansion,
11               main MCU IDD measurement (IDD is the amount of current that flows
12               through VDD) and resistive touchscreen controller.
13
14maintainers:
15  - Amelie Delaunay <amelie.delaunay@foss.st.com>
16
17properties:
18  compatible:
19    const: st,stmfx-0300
20
21  reg:
22    enum: [ 0x42, 0x43 ]
23
24  interrupts:
25    maxItems: 1
26
27  drive-open-drain: true
28
29  vdd-supply: true
30
31  pinctrl:
32    type: object
33
34    properties:
35      compatible:
36        const: st,stmfx-0300-pinctrl
37
38      "#gpio-cells":
39        const: 2
40
41      "#interrupt-cells":
42        const: 2
43
44      gpio-controller: true
45
46      interrupt-controller: true
47
48      gpio-ranges:
49        description: if all STMFX pins[24:0] are available (no other STMFX function in use),
50                     you should use gpio-ranges = <&stmfx_pinctrl 0 0 24>;
51                     if agpio[3:0] are not available (STMFX Touchscreen function in use),
52                     you should use gpio-ranges = <&stmfx_pinctrl 0 0 16>, <&stmfx_pinctrl 20 20 4>;
53                     if agpio[7:4] are not available (STMFX IDD function in use),
54                     you should use gpio-ranges = <&stmfx_pinctrl 0 0 20>;
55        maxItems: 1
56
57    patternProperties:
58      "^[a-zA-Z]*-pins$":
59        type: object
60        additionalProperties: false
61
62        allOf:
63          - $ref: ../pinctrl/pinmux-node.yaml
64
65        properties:
66          pins: true
67          bias-disable: true
68          bias-pull-up: true
69          bias-pull-pin-default: true
70          bias-pull-down: true
71          drive-open-drain: true
72          drive-push-pull: true
73          output-high: true
74          output-low: true
75
76    additionalProperties: false
77
78    required:
79      - compatible
80      - "#gpio-cells"
81      - "#interrupt-cells"
82      - gpio-controller
83      - interrupt-controller
84      - gpio-ranges
85
86additionalProperties: false
87
88required:
89  - compatible
90  - reg
91  - interrupts
92
93examples:
94  - |
95    #include <dt-bindings/interrupt-controller/arm-gic.h>
96    i2c {
97      #address-cells = <1>;
98      #size-cells = <0>;
99      stmfx@42 {
100        compatible = "st,stmfx-0300";
101        reg = <0x42>;
102        interrupts = <8 IRQ_TYPE_EDGE_RISING>;
103        interrupt-parent = <&gpioi>;
104        vdd-supply = <&v3v3>;
105
106        stmfx_pinctrl: pinctrl {
107          compatible = "st,stmfx-0300-pinctrl";
108          #gpio-cells = <2>;
109          #interrupt-cells = <2>;
110          gpio-controller;
111          interrupt-controller;
112          gpio-ranges = <&stmfx_pinctrl 0 0 24>;
113
114          joystick_pins: joystick-pins {
115            pins = "gpio0", "gpio1", "gpio2", "gpio3", "gpio4";
116            drive-push-pull;
117            bias-pull-up;
118          };
119        };
120      };
121    };
122...
123