1# SPDX-License-Identifier: GPL-2.0-only
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/net/dsa/microchip,ksz.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Microchip KSZ Series Ethernet switches
8
9maintainers:
10  - Marek Vasut <marex@denx.de>
11  - Woojung Huh <Woojung.Huh@microchip.com>
12
13allOf:
14  - $ref: dsa.yaml#/$defs/ethernet-ports
15  - $ref: /schemas/spi/spi-peripheral-props.yaml#
16
17properties:
18  # See Documentation/devicetree/bindings/net/dsa/dsa.yaml for a list of additional
19  # required and optional properties.
20  compatible:
21    enum:
22      - microchip,ksz8765
23      - microchip,ksz8794
24      - microchip,ksz8795
25      - microchip,ksz8863
26      - microchip,ksz8873
27      - microchip,ksz9477
28      - microchip,ksz9897
29      - microchip,ksz9896
30      - microchip,ksz9567
31      - microchip,ksz8565
32      - microchip,ksz9893
33      - microchip,ksz9563
34      - microchip,ksz8563
35
36  reset-gpios:
37    description:
38      Should be a gpio specifier for a reset line.
39    maxItems: 1
40
41  microchip,synclko-125:
42    $ref: /schemas/types.yaml#/definitions/flag
43    description:
44      Set if the output SYNCLKO frequency should be set to 125MHz instead of 25MHz.
45
46  microchip,synclko-disable:
47    $ref: /schemas/types.yaml#/definitions/flag
48    description:
49      Set if the output SYNCLKO clock should be disabled. Do not mix with
50      microchip,synclko-125.
51
52required:
53  - compatible
54  - reg
55
56unevaluatedProperties: false
57
58examples:
59  - |
60    #include <dt-bindings/gpio/gpio.h>
61
62    // Ethernet switch connected via SPI to the host, CPU port wired to eth0:
63    eth0 {
64        fixed-link {
65            speed = <1000>;
66            full-duplex;
67        };
68    };
69
70    spi {
71        #address-cells = <1>;
72        #size-cells = <0>;
73
74        pinctrl-0 = <&pinctrl_spi_ksz>;
75        cs-gpios = <&pioC 25 0>;
76        id = <1>;
77
78        ksz9477: switch@0 {
79            compatible = "microchip,ksz9477";
80            reg = <0>;
81            reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
82
83            spi-max-frequency = <44000000>;
84
85            ethernet-ports {
86                #address-cells = <1>;
87                #size-cells = <0>;
88                port@0 {
89                    reg = <0>;
90                    label = "lan1";
91                };
92                port@1 {
93                    reg = <1>;
94                    label = "lan2";
95                };
96                port@2 {
97                    reg = <2>;
98                    label = "lan3";
99                };
100                port@3 {
101                    reg = <3>;
102                    label = "lan4";
103                };
104                port@4 {
105                    reg = <4>;
106                    label = "lan5";
107                };
108                port@5 {
109                    reg = <5>;
110                    ethernet = <&eth0>;
111                    phy-mode = "rgmii";
112
113                    fixed-link {
114                        speed = <1000>;
115                        full-duplex;
116                    };
117                };
118            };
119        };
120
121        ksz8565: switch@1 {
122            compatible = "microchip,ksz8565";
123            reg = <1>;
124
125            spi-max-frequency = <44000000>;
126
127            ethernet-ports {
128                #address-cells = <1>;
129                #size-cells = <0>;
130                port@0 {
131                    reg = <0>;
132                    label = "lan1";
133                };
134                port@1 {
135                    reg = <1>;
136                    label = "lan2";
137                };
138                port@2 {
139                    reg = <2>;
140                    label = "lan3";
141                };
142                port@3 {
143                    reg = <3>;
144                    label = "lan4";
145                };
146                port@6 {
147                    reg = <6>;
148                    ethernet = <&eth0>;
149                    phy-mode = "rgmii";
150
151                    fixed-link {
152                        speed = <1000>;
153                        full-duplex;
154                    };
155                };
156            };
157        };
158    };
159...
160