1Microchip LAN78xx Gigabit Ethernet controller
2
3The LAN78XX devices are usually configured by programming their OTP or with
4an external EEPROM, but some platforms (e.g. Raspberry Pi 3 B+) have neither.
5The Device Tree properties, if present, override the OTP and EEPROM.
6
7Required properties:
8- compatible: Should be one of "usb424,7800", "usb424,7801" or "usb424,7850".
9
10The MAC address will be determined using the optional properties
11defined in ethernet.txt.
12
13Optional properties of the embedded PHY:
14- microchip,led-modes: a 0..4 element vector, with each element configuring
15  the operating mode of an LED. Omitted LEDs are turned off. Allowed values
16  are defined in "include/dt-bindings/net/microchip-lan78xx.h".
17
18Example:
19
20/* Based on the configuration for a Raspberry Pi 3 B+ */
21&usb {
22	usb-port@1 {
23		compatible = "usb424,2514";
24		reg = <1>;
25		#address-cells = <1>;
26		#size-cells = <0>;
27
28		usb-port@1 {
29			compatible = "usb424,2514";
30			reg = <1>;
31			#address-cells = <1>;
32			#size-cells = <0>;
33
34			ethernet: ethernet@1 {
35				compatible = "usb424,7800";
36				reg = <1>;
37				local-mac-address = [ 00 11 22 33 44 55 ];
38
39				mdio {
40					#address-cells = <0x1>;
41					#size-cells = <0x0>;
42					eth_phy: ethernet-phy@1 {
43						reg = <1>;
44						microchip,led-modes = <
45							LAN78XX_LINK_1000_ACTIVITY
46							LAN78XX_LINK_10_100_ACTIVITY
47						>;
48					};
49				};
50			};
51		};
52	};
53};
54