1Qualcomm Technologies EMAC Gigabit Ethernet Controller
2
3This network controller consists of two devices: a MAC and an SGMII
4internal PHY.  Each device is represented by a device tree node.  A phandle
5connects the MAC node to its corresponding internal phy node.  Another
6phandle points to the external PHY node.
7
8Required properties:
9
10MAC node:
11- compatible : Should be "qcom,fsm9900-emac".
12- reg : Offset and length of the register regions for the device
13- interrupts : Interrupt number used by this controller
14- mac-address : The 6-byte MAC address. If present, it is the default
15	MAC address.
16- internal-phy : phandle to the internal PHY node
17- phy-handle : phandle the the external PHY node
18
19Internal PHY node:
20- compatible : Should be "qcom,fsm9900-emac-sgmii" or "qcom,qdf2432-emac-sgmii".
21- reg : Offset and length of the register region(s) for the device
22- interrupts : Interrupt number used by this controller
23
24The external phy child node:
25- reg : The phy address
26
27Example:
28
29FSM9900:
30
31soc {
32	#address-cells = <1>;
33	#size-cells = <1>;
34
35	emac0: ethernet@feb20000 {
36		compatible = "qcom,fsm9900-emac";
37		reg = <0xfeb20000 0x10000>,
38		      <0xfeb36000 0x1000>;
39		interrupts = <76>;
40
41		clocks = <&gcc 0>, <&gcc 1>, <&gcc 3>, <&gcc 4>, <&gcc 5>,
42			<&gcc 6>, <&gcc 7>;
43		clock-names = "axi_clk", "cfg_ahb_clk", "high_speed_clk",
44			"mdio_clk", "tx_clk", "rx_clk", "sys_clk";
45
46		internal-phy = <&emac_sgmii>;
47
48		phy-handle = <&phy0>;
49
50		#address-cells = <1>;
51		#size-cells = <0>;
52		phy0: ethernet-phy@0 {
53			reg = <0>;
54		};
55
56		pinctrl-names = "default";
57		pinctrl-0 = <&mdio_pins_a>;
58	};
59
60	emac_sgmii: ethernet@feb38000 {
61		compatible = "qcom,fsm9900-emac-sgmii";
62		reg = <0xfeb38000 0x1000>;
63		interrupts = <80>;
64	};
65
66	tlmm: pinctrl@fd510000 {
67		compatible = "qcom,fsm9900-pinctrl";
68
69		mdio_pins_a: mdio {
70			state {
71				pins = "gpio123", "gpio124";
72				function = "mdio";
73			};
74		};
75	};
76
77
78QDF2432:
79
80soc {
81	#address-cells = <2>;
82	#size-cells = <2>;
83
84	emac0: ethernet@38800000 {
85		compatible = "qcom,fsm9900-emac";
86		reg = <0x0 0x38800000 0x0 0x10000>,
87		      <0x0 0x38816000 0x0 0x1000>;
88		interrupts = <0 256 4>;
89
90		clocks = <&gcc 0>, <&gcc 1>, <&gcc 3>, <&gcc 4>, <&gcc 5>,
91			 <&gcc 6>, <&gcc 7>;
92		clock-names = "axi_clk", "cfg_ahb_clk", "high_speed_clk",
93			"mdio_clk", "tx_clk", "rx_clk", "sys_clk";
94
95		internal-phy = <&emac_sgmii>;
96
97		phy-handle = <&phy0>;
98
99		#address-cells = <1>;
100		#size-cells = <0>;
101		phy0: ethernet-phy@4 {
102			reg = <4>;
103		};
104	};
105
106	emac_sgmii: ethernet@410400 {
107		compatible = "qcom,qdf2432-emac-sgmii";
108		reg = <0x0 0x00410400 0x0 0xc00>, /* Base address */
109		      <0x0 0x00410000 0x0 0x400>; /* Per-lane digital */
110		interrupts = <0 254 1>;
111	};
112