1* Amazon Annapurna Labs PCIe host bridge
2
3Amazon's Annapurna Labs PCIe Host Controller is based on the Synopsys DesignWare
4PCI core. It inherits common properties defined in
5Documentation/devicetree/bindings/pci/designware-pcie.txt.
6
7Properties of the host controller node that differ from it are:
8
9- compatible:
10	Usage: required
11	Value type: <stringlist>
12	Definition: Value should contain
13			- "amazon,al-alpine-v2-pcie" for alpine_v2
14			- "amazon,al-alpine-v3-pcie" for alpine_v3
15
16- reg:
17	Usage: required
18	Value type: <prop-encoded-array>
19	Definition: Register ranges as listed in the reg-names property
20
21- reg-names:
22	Usage: required
23	Value type: <stringlist>
24	Definition: Must include the following entries
25			- "config"	PCIe ECAM space
26			- "controller"	AL proprietary registers
27			- "dbi"		Designware PCIe registers
28
29Example:
30
31	pcie-external0: pcie@fb600000 {
32		compatible = "amazon,al-alpine-v3-pcie";
33		reg = <0x0 0xfb600000 0x0 0x00100000
34		       0x0 0xfd800000 0x0 0x00010000
35		       0x0 0xfd810000 0x0 0x00001000>;
36		reg-names = "config", "controller", "dbi";
37		bus-range = <0 255>;
38		device_type = "pci";
39		#address-cells = <3>;
40		#size-cells = <2>;
41		#interrupt-cells = <1>;
42		interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
43		interrupt-map-mask = <0x00 0 0 7>;
44		interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; /* INTa */
45		ranges = <0x02000000 0x0 0xc0010000 0x0 0xc0010000 0x0 0x07ff0000>;
46	};
47