1Kernel driver adm1275 2===================== 3 4Supported chips: 5 6 * Analog Devices ADM1075 7 8 Prefix: 'adm1075' 9 10 Addresses scanned: - 11 12 Datasheet: www.analog.com/static/imported-files/data_sheets/ADM1075.pdf 13 14 * Analog Devices ADM1272 15 16 Prefix: 'adm1272' 17 18 Addresses scanned: - 19 20 Datasheet: www.analog.com/static/imported-files/data_sheets/ADM1272.pdf 21 22 * Analog Devices ADM1275 23 24 Prefix: 'adm1275' 25 26 Addresses scanned: - 27 28 Datasheet: www.analog.com/static/imported-files/data_sheets/ADM1275.pdf 29 30 * Analog Devices ADM1276 31 32 Prefix: 'adm1276' 33 34 Addresses scanned: - 35 36 Datasheet: www.analog.com/static/imported-files/data_sheets/ADM1276.pdf 37 38 * Analog Devices ADM1278 39 40 Prefix: 'adm1278' 41 42 Addresses scanned: - 43 44 Datasheet: www.analog.com/static/imported-files/data_sheets/ADM1278.pdf 45 46 * Analog Devices ADM1293/ADM1294 47 48 Prefix: 'adm1293', 'adm1294' 49 50 Addresses scanned: - 51 52 Datasheet: http://www.analog.com/media/en/technical-documentation/data-sheets/ADM1293_1294.pdf 53 54Author: Guenter Roeck <linux@roeck-us.net> 55 56 57Description 58----------- 59 60This driver supports hardware monitoring for Analog Devices ADM1075, ADM1272, 61ADM1275, ADM1276, ADM1278, ADM1293, and ADM1294 Hot-Swap Controller and 62Digital Power Monitors. 63 64ADM1075, ADM1272, ADM1275, ADM1276, ADM1278, ADM1293, and ADM1294 are hot-swap 65controllers that allow a circuit board to be removed from or inserted into 66a live backplane. They also feature current and voltage readback via an 67integrated 12 bit analog-to-digital converter (ADC), accessed using a 68PMBus interface. 69 70The driver is a client driver to the core PMBus driver. Please see 71Documentation/hwmon/pmbus.rst for details on PMBus client drivers. 72 73 74Usage Notes 75----------- 76 77This driver does not auto-detect devices. You will have to instantiate the 78devices explicitly. Please see Documentation/i2c/instantiating-devices.rst for 79details. 80 81The ADM1075, unlike many other PMBus devices, does not support internal voltage 82or current scaling. Reported voltages, currents, and power are raw measurements, 83and will typically have to be scaled. 84 85The shunt value in micro-ohms can be set via device tree at compile-time. Please 86refer to the Documentation/devicetree/bindings/hwmon/adm1275.txt for bindings 87if the device tree is used. 88 89Platform data support 90--------------------- 91 92The driver supports standard PMBus driver platform data. Please see 93Documentation/hwmon/pmbus.rst for details. 94 95 96Sysfs entries 97------------- 98 99The following attributes are supported. Limits are read-write, history reset 100attributes are write-only, all other attributes are read-only. 101 102======================= ======================================================= 103inX_label "vin1" or "vout1" depending on chip variant and 104 configuration. On ADM1075, ADM1293, and ADM1294, 105 vout1 reports the voltage on the VAUX pin. 106inX_input Measured voltage. 107inX_min Minimum Voltage. 108inX_max Maximum voltage. 109inX_min_alarm Voltage low alarm. 110inX_max_alarm Voltage high alarm. 111inX_highest Historical maximum voltage. 112inX_reset_history Write any value to reset history. 113 114curr1_label "iout1" 115curr1_input Measured current. 116curr1_max Maximum current. 117curr1_max_alarm Current high alarm. 118curr1_lcrit Critical minimum current. Depending on the chip 119 configuration, either curr1_lcrit or curr1_crit is 120 supported, but not both. 121curr1_lcrit_alarm Critical current low alarm. 122curr1_crit Critical maximum current. Depending on the chip 123 configuration, either curr1_lcrit or curr1_crit is 124 supported, but not both. 125curr1_crit_alarm Critical current high alarm. 126curr1_highest Historical maximum current. 127curr1_reset_history Write any value to reset history. 128 129power1_label "pin1" 130power1_input Input power. 131power1_input_lowest Lowest observed input power. ADM1293 and ADM1294 only. 132power1_input_highest Highest observed input power. 133power1_reset_history Write any value to reset history. 134 135 Power attributes are supported on ADM1075, ADM1272, 136 ADM1276, ADM1293, and ADM1294. 137 138temp1_input Chip temperature. 139temp1_max Maximum chip temperature. 140temp1_max_alarm Temperature alarm. 141temp1_crit Critical chip temperature. 142temp1_crit_alarm Critical temperature high alarm. 143temp1_highest Highest observed temperature. 144temp1_reset_history Write any value to reset history. 145 146 Temperature attributes are supported on ADM1272 and 147 ADM1278. 148======================= ======================================================= 149