1Release Date    : Thu. Jun 19, 2014 17:00:00 PST 2014 -
2			(emaild-id:megaraidlinux@lsi.com)
3			Adam Radford
4			Kashyap Desai
5			Sumit Saxena
6			Uday Lingala
7Current Version : 06.803.02.00-rc1
8Old Version     : 06.803.01.00-rc1
9    1. Fix reset_mutex leak in megasas_reset_fusion().
10    2. Remove unused variables in megasas_instance.
11    3. Fix LD/VF affiliation parsing.
12    4. Add missing initial call to megasas_get_ld_vf_affiliation().
13    5. Version and Changelog update.
14-------------------------------------------------------------------------------
15Release Date    : Mon. Mar 10, 2014 17:00:00 PST 2014 -
16			(emaild-id:megaraidlinux@lsi.com)
17			Adam Radford
18			Kashyap Desai
19			Sumit Saxena
20Current Version : 06.803.01.00-rc1
21Old Version     : 06.700.06.00-rc1
22    1. Load correct raid context timeout value for multipathing & clustering.
23    2. Fix megasas_ioc_init_fusion to use local stack variable.
24    3. Return leaked MPT frames to MPT command pool.
25    4. Add Dell PowerEdge VRTX SR-IOV VF device support.
26    5. Version and Changelog update.
27-------------------------------------------------------------------------------
28Release Date    : Sat. Aug 31, 2013 17:00:00 PST 2013 -
29			(emaild-id:megaraidlinux@lsi.com)
30			Adam Radford
31			Kashyap Desai
32			Sumit Saxena
33Current Version : 06.700.06.00-rc1
34Old Version     : 06.600.18.00-rc1
35    1. Add High Availability clustering support using shared Logical Disks.
36    2. Version and Changelog update.
37-------------------------------------------------------------------------------
38Release Date    : Wed. May 15, 2013 17:00:00 PST 2013 -
39			(emaild-id:megaraidlinux@lsi.com)
40			Adam Radford
41			Kashyap Desai
42			Sumit Saxena
43Current Version : 06.600.18.00-rc1
44Old Version     : 06.506.00.00-rc1
45    1. Return DID_ERROR for scsi io, when controller is in critical h/w error.
46    2. Fix the interrupt mask for Gen2 controller.
47    3. Update balance count in driver to be in sync of firmware.
48    4. Free event detail memory without device ID check.
49    5. Set IO request timeout value provided by OS timeout for Tape devices.
50    6. Add support for MegaRAID Fury (device ID-0x005f) 12Gb/s controllers.
51    7. Add support to display Customer branding details in syslog.
52    8. Set IoFlags to enable Fast Path for JBODs for Invader/Fury(12 Gb/s)
53    controllers.
54    9. Add support for Extended MSI-x vectors for Invader and Fury(12Gb/s
55    HBA).
56    10.Add support for Uneven Span PRL11.
57    11.Add support to differentiate between iMR and MR Firmware.
58    12.Version and Changelog update.
59-------------------------------------------------------------------------------
60Release Date    : Sat. Feb 9, 2013 17:00:00 PST 2013 -
61			(emaild-id:megaraidlinux@lsi.com)
62			Adam Radford
63Current Version : 06.506.00.00-rc1
64Old Version     : 06.504.01.00-rc1
65    1. Add 4k FastPath DIF support.
66    2. Don't load DevHandle unless FastPath enabled.
67    3. Version and Changelog update.
68-------------------------------------------------------------------------------
69Release Date    : Mon. Oct 1, 2012 17:00:00 PST 2012 -
70			(emaild-id:megaraidlinux@lsi.com)
71			Adam Radford
72Current Version : 06.504.01.00-rc1
73Old Version     : 00.00.06.18-rc1
74    1. Removed un-needed completion_lock spinlock calls.
75    2. Add module param for configurable MSI-X vector count.
76    3. Load io_request DataLength in bytes.
77    4. Add array boundary check for SystemPD.
78    5. Add SystemPD FastPath support.
79    6. Remove duplicate code.
80    7. Version, Changelog, Copyright update.
81-------------------------------------------------------------------------------
82Release Date    : Tue. Jun 17, 2012 17:00:00 PST 2012 -
83			(emaild-id:megaraidlinux@lsi.com)
84			Adam Radford/Kashyap Desai
85Current Version : 00.00.06.18-rc1
86Old Version     : 00.00.06.15-rc1
87    1. Fix Copyright dates.
88    2. Add throttlequeuedepth module parameter.
89    3. Add resetwaittime module parameter.
90    4. Move poll_aen_lock initializer.
91-------------------------------------------------------------------------------
92Release Date    : Mon. Mar 19, 2012 17:00:00 PST 2012 -
93			(emaild-id:megaraidlinux@lsi.com)
94			Adam Radford
95Current Version : 00.00.06.15-rc1
96Old Version     : 00.00.06.14-rc1
97    1. Optimize HostMSIxVectors setting.
98    2. Add fpRead/WriteCapable, fpRead/WriteAcrossStripe checks.
99-------------------------------------------------------------------------------
100Release Date    : Fri. Jan 6, 2012 17:00:00 PST 2010 -
101			(emaild-id:megaraidlinux@lsi.com)
102			Adam Radford
103Current Version : 00.00.06.14-rc1
104Old Version     : 00.00.06.12-rc1
105    1. Fix reglockFlags for degraded raid5/6 for MR 9360/9380.
106    2. Mask off flags in ioctl path to prevent memory scribble with older
107       MegaCLI versions.
108    3. Remove poll_mode_io module parameter, sysfs node, and associated code.
109-------------------------------------------------------------------------------
110Release Date    : Wed. Oct 5, 2011 17:00:00 PST 2010 -
111			(emaild-id:megaraidlinux@lsi.com)
112			Adam Radford
113Current Version : 00.00.06.12-rc1
114Old Version     : 00.00.05.40-rc1
115    1. Continue booting immediately if FW in FAULT at driver load time.
116    2. Increase default cmds per lun to 256.
117    3. Fix mismatch in megasas_reset_fusion() mutex lock-unlock.
118    4. Remove some un-necessary code.
119    5. Clear state change interrupts for Fusion/Invader.
120    6. Clear FUSION_IN_RESET before enabling interrupts.
121    7. Add support for MegaRAID 9360/9380 12GB/s controllers.
122    8. Add multiple MSI-X vector/multiple reply queue support.
123    9. Add driver workaround for PERC5/1068 kdump kernel panic.
124-------------------------------------------------------------------------------
125Release Date    : Tue. Jul 26, 2011 17:00:00 PST 2010 -
126			(emaild-id:megaraidlinux@lsi.com)
127			Adam Radford
128Current Version : 00.00.05.40-rc1
129Old Version     : 00.00.05.38-rc1
130    1. Fix FastPath I/O to work with degraded RAID 1.
131    2. Add .change_queue_depth support.
132-------------------------------------------------------------------------------
133Release Date    : Wed. May 11, 2011 17:00:00 PST 2010 -
134			(emaild-id:megaraidlinux@lsi.com)
135			Adam Radford
136Current Version : 00.00.05.38-rc1
137Old Version     : 00.00.05.34-rc1
138    1. Remove MSI-X black list, use MFI_REG_STATE.ready.msiEnable.
139    2. Remove un-used function megasas_return_cmd_for_smid().
140    3. Check MFI_REG_STATE.fault.resetAdapter in megasas_reset_fusion().
141    4. Disable interrupts/free_irq() in megasas_shutdown().
142    5. Fix bug where AENs could be lost in probe() and resume().
143    6. Convert 6,10,12 byte CDB's to 16 byte CDB for large LBA's for FastPath
144       IO.
145    7. Add 1078 OCR support.
146-------------------------------------------------------------------------------
147Release Date    : Thu. Feb 24, 2011 17:00:00 PST 2010 -
148			(emaild-id:megaraidlinux@lsi.com)
149			Adam Radford
150Current Version : 00.00.05.34-rc1
151Old Version     : 00.00.05.29-rc1
152    1. Fix some failure gotos from megasas_probe_one(), etc.
153    2. Add missing check_and_restore_queue_depth() call in
154       complete_cmd_fusion().
155    3. Enable MSI-X before calling megasas_init_fw().
156    4. Call tasklet_schedule() even if outbound_intr_status == 0 for MFI based
157       boards in MSI-X mode.
158    5. Fix megasas_probe_one() to clear PCI_MSIX_FLAGS_ENABLE in msi control
159       register in kdump kernel.
160    6. Fix megasas_get_cmd() to only print "Command pool empty" if
161       megasas_dbg_lvl is set.
162    7. Fix megasas_build_dcdb_fusion() to not filter by TYPE_DISK.
163    8. Fix megasas_build_dcdb_fusion() to use io_request->LUN[1] field.
164    9. Add MR_EVT_CFG_CLEARED to megasas_aen_polling().
165    10. Fix tasklet_init() in megasas_init_fw() to use instancet->tasklet.
166    11. Fix fault state handling in megasas_transition_to_ready().
167    12. Fix max_sectors setting for IEEE SGL's.
168    13. Fix iMR OCR support to work correctly.
169-------------------------------------------------------------------------------
170Release Date    : Tues.  Dec 14, 2010 17:00:00 PST 2010 -
171			(emaild-id:megaraidlinux@lsi.com)
172			Adam Radford
173Current Version : 00.00.05.29-rc1
174Old Version     : 00.00.04.31-rc1
175    1. Rename megaraid_sas.c to megaraid_sas_base.c.
176    2. Update GPL headers.
177    3. Add MSI-X support and 'msix_disable' module parameter.
178    4. Use lowest memory bar (for SR-IOV VF support).
179    5. Add struct megasas_instance_temlate changes, and change all code to use
180       new instance entries:
181
182       irqreturn_t (*service_isr )(int irq, void *devp);
183       void (*tasklet)(unsigned long);
184       u32 (*init_adapter)(struct megasas_instance *);
185       u32 (*build_and_issue_cmd) (struct megasas_instance *,
186       struct scsi_cmnd *);
187       void (*issue_dcmd) (struct megasas_instance *instance,
188                              struct megasas_cmd *cmd);
189
190   6. Add code to support MegaRAID 9265/9285 controllers device id (0x5b).
191-------------------------------------------------------------------------------
1921 Release Date    : Thur.  May 03, 2010 09:12:45 PST 2009 -
193			(emaild-id:megaraidlinux@lsi.com)
194			Bo Yang
195
1962 Current Version : 00.00.04.31-rc1
1973 Older Version   : 00.00.04.17.1-rc1
198
1991.	Add the Online Controller Reset (OCR) to the Driver.
200	OCR is the new feature for megaraid_sas driver which
201	will allow the fw to do the chip reset which will not
202	affect the OS behavior.
203
204	To add the OCR support, driver need to do:
205		a). reset the controller chips -- Xscale and Gen2 which
206		will change the function calls and add the reset function
207		related to this two chips.
208
209		b). during the reset, driver will store the pending cmds
210		which not returned by FW to driver's pending queue.  Driver
211		will re-issue those pending cmds again to FW after the OCR
212		finished.
213
214		c). In driver's timeout routine, driver will report to
215		OS as reset. Also driver's queue routine will block the
216		cmds until the OCR finished.
217
218		d). in Driver's ISR routine, if driver get the FW state as
219		state change, FW in Failure status and FW support online controller
220		reset (OCR), driver will start to do the controller reset.
221
222		e). In driver's IOCTL routine, the application cmds will wait for the
223		OCR to finish, then issue the cmds to FW.
224
225		f). Before driver kill adapter, driver will do last chance of
226		OCR to see if driver can bring back the FW.
227
2282.	Add the support update flag to the driver to tell LSI megaraid_sas
229	application which driver will support the device update.  So application
230	will not need to do the device update after application add/del the device
231	from the system.
2323.	In driver's timeout routine, driver will do three time reset if fw is in
233	failed state.  Driver will kill adapter if can't bring back FW after the
234	this three times reset.
2354.	Add the input parameter max_sectors to 1MB support to our GEN2 controller.
236	customer can use the input parameter max_sectors to add 1MB support to GEN2
237	controller.
238
2391 Release Date    : Thur.  Oct 29, 2009 09:12:45 PST 2009 -
240			(emaild-id:megaraidlinux@lsi.com)
241			Bo Yang
242
2432 Current Version : 00.00.04.17.1-rc1
2443 Older Version   : 00.00.04.12
245
2461.	Add the pad_0 in mfi frame structure to 0 to fix the
247	context value larger than 32bit value issue.
248
2492.	Add the logic drive list to the driver.  Driver will
250	keep the logic drive list internal after driver load.
251
2523.	driver fixed the device update issue after get the AEN
253	PD delete/ADD, LD add/delete from FW.
254
2551 Release Date    : Tues.  July 28, 2009 10:12:45 PST 2009 -
256			(emaild-id:megaraidlinux@lsi.com)
257			Bo Yang
258
2592 Current Version : 00.00.04.12
2603 Older Version   : 00.00.04.10
261
2621.	Change the AEN sys PD update from scsi_scan to
263	scsi_add_device and scsi_remove_device.
2642.	Takeoff the debug print-out in aen_polling routine.
265
2661 Release Date    : Thur.  July 02, 2009 10:12:45 PST 2009 -
267			(emaild-id:megaraidlinux@lsi.com)
268			Bo Yang
269
2702 Current Version : 00.00.04.10
2713 Older Version   : 00.00.04.08
272
2731.	Add the 3 mins timeout during the controller initialize.
2742.	Add the fix for 64bit sense date errors.
275
2761 Release Date    : Tues. May 05, 2009 10:12:45 PST 2009 -
277			(emaild-id:megaraidlinux@lsi.com)
278			Bo Yang
279
2802 Current Version : 00.00.04.08
2813 Older Version   : 00.00.04.06
282
2831.	Add the fix of pending in FW after deleted the logic drives.
2842.	Add the fix of deallocating memory after get pdlist.
285
2861 Release Date    : Tues. March 26, 2009 10:12:45 PST 2009 -
287			(emaild-id:megaraidlinux@lsi.com)
288			Bo Yang
289
2902 Current Version : 00.00.04.06
2913 Older Version   : 00.00.04.04
292
2931.	Add the fix of the driver cmd empty fix of the driver cmd empty.
2942.	Add the fix of the driver MSM AEN CMD cause the system slow.
295
2961 Release Date    : Tues. March 03, 2009 10:12:45 PST 2009 -
297			(emaild-id:megaraidlinux@lsi.com)
298			Bo Yang
299
3002 Current Version : 00.00.04.04
3013 Older Version   : 00.00.04.01
302
3031.	Add the Tape drive fix to the driver: If the command is for
304	the tape device, set the pthru timeout to the os layer timeout value.
305
3062.	Add Poll_wait mechanism to Gen-2 Linux driv.
307		In the aen handler, driver needs to wakeup poll handler similar to
308		the way it raises SIGIO.
309
3103.	Add new controller new SAS2 support to the driver.
311
3124.	Report the unconfigured PD (system PD) to OS.
313
3145.	Add the IEEE SGL support to the driver
315
3166.	Reasign the Application cmds to SAS2 controller
317
3181 Release Date    : Thur.July. 24 11:41:51 PST 2008 -
319                       (emaild-id:megaraidlinux@lsi.com)
320                       Sumant Patro
321                       Bo Yang
322
3232 Current Version : 00.00.04.01
3243 Older Version   : 00.00.03.22
325
3261. Add the new controller (0078, 0079) support to the driver
327       Those controllers are LSI's next generatation(gen2) SAS controllers.
328
3291 Release Date    : Mon.June. 23 10:12:45 PST 2008 -
330                       (emaild-id:megaraidlinux@lsi.com)
331                       Sumant Patro
332                       Bo Yang
333
3342 Current Version : 00.00.03.22
3353 Older Version   : 00.00.03.20
336
3371. Add shutdown DCMD cmd to the shutdown routine to make FW shutdown proper.
3382. Unexpected interrupt occurs in HWR Linux driver, add the dumy readl pci flush will fix this issue.
339
3401 Release Date    : Mon. March 10 11:02:31 PDT 2008 -
341			(emaild-id:megaraidlinux@lsi.com)
342			Sumant Patro
343			Bo Yang
344
3452 Current Version : 00.00.03.20-RC1
3463 Older Version   : 00.00.03.16
347
3481. Rollback the sense info implementation
349	Sense buffer ptr data type in the ioctl path is reverted back
350	to u32 * as in previous versions of driver.
351
3522. Fixed the driver frame count.
353	When Driver sent wrong frame count to firmware.  As this
354	particular command is sent to drive, FW is seeing continuous
355	chip resets and so the command will timeout.
356
3573. Add the new controller(1078DE) support to the driver
358	and Increase the max_wait to 60 from 10 in the controller
359	operational status.  With this max_wait increase, driver will
360	make sure the FW will 	finish the pending cmd for KDUMP case.
361
3621 Release Date    : Thur. Nov. 07 16:30:43 PST 2007 -
363			(emaild-id:megaraidlinux@lsi.com)
364			Sumant Patro
365			Bo Yang
366
3672 Current Version : 00.00.03.16
3683 Older Version   : 00.00.03.15
369
3701. Increased MFI_POLL_TIMEOUT_SECS to 60 seconds from 10. FW may take
371	a max of 60 seconds to respond to the INIT cmd.
372
3731 Release Date    : Fri. Sep. 07 16:30:43 PST 2007 -
374			(emaild-id:megaraidlinux@lsi.com)
375			Sumant Patro
376			Bo Yang
377
3782 Current Version : 00.00.03.15
3793 Older Version   : 00.00.03.14
380
3811. Added module parameter "poll_mode_io" to support for "polling"
382	(reduced interrupt operation).  In this mode, IO completion
383	interrupts are delayed. At the end of initiating IOs, the
384	driver schedules for cmd completion if there are pending cmds
385	to be completed.  A timer-based interrupt has also been added
386	to prevent IO completion processing from being delayed
387	indefinitely in the case that no new IOs are initiated.
388
3891 Release Date    : Fri. Sep. 07 16:30:43 PST 2007 -
390			(emaild-id:megaraidlinux@lsi.com)
391			Sumant Patro
392			Bo Yang
393
3942 Current Version : 00.00.03.14
3953 Older Version   : 00.00.03.13
396
3971. Setting the max_sectors_per_req based on max SGL supported by the
398	FW. Prior versions calculated this value from controller info
399	(max_sectors_1, max_sectors_2). For certain controllers/FW,
400	this was resulting in a value greater than max SGL supported
401	by the FW. Issue was first reported by users running LUKS+XFS
402	with megaraid_sas.  Thanks to RB for providing the logs and
403	duplication steps that helped to get to the root cause of the
404	issue.  2. Increased MFI_POLL_TIMEOUT_SECS to 60 seconds from
405	10. FW may take a max of 60 seconds to respond to the INIT
406	cmd.
407
4081 Release Date    : Fri. June. 15 16:30:43 PST 2007 -
409			(emaild-id:megaraidlinux@lsi.com)
410			Sumant Patro
411			Bo Yang
412
4132 Current Version : 00.00.03.13
4143 Older Version   : 00.00.03.12
415
4161. Added the megasas_reset_timer routine to intercept cmd timeout and throttle io.
417
418On Fri, 2007-03-16 at 16:44 -0600, James Bottomley wrote:
419It looks like megaraid_sas at least needs this to throttle its commands
420> as they begin to time out.  The code keeps the existing transport
421> template use of eh_timed_out (and allows the transport to override the
422> host if they both have this callback).
423>
424> James
425
4261 Release Date    : Sat May. 12 16:30:43 PST 2007 -
427			(emaild-id:megaraidlinux@lsi.com)
428			Sumant Patro
429			Bo Yang
430
4312 Current Version : 00.00.03.12
4323 Older Version   : 00.00.03.11
433
4341.  When MegaSAS driver receives reset call from OS, driver waits in reset
435routine for max 3 minutes for all pending command completion. Now driver will
436call completion routine every 5 seconds from the reset routine instead of
437waiting for depending on cmd completion from isr path.
438
4391 Release Date    : Mon Apr. 30 10:25:52 PST 2007 -
440			(emaild-id:megaraidlinux@lsi.com)
441			Sumant Patro
442			Bo Yang
443
4442 Current Version : 00.00.03.11
4453 Older Version   : 00.00.03.09
446
447	1. Memory Manager for IOCTL removed for 2.6 kernels.
448	   pci_alloc_consistent replaced by dma_alloc_coherent. With this
449	   change there is no need of memory manager in the driver code
450
451	On Wed, 2007-02-07 at 13:30 -0800, Andrew Morton wrote:
452	> I suspect all this horror is due to stupidity in the DMA API.
453	>
454	> pci_alloc_consistent() just goes and assumes GFP_ATOMIC, whereas
455	> the caller (megasas_mgmt_fw_ioctl) would have been perfectly happy
456	> to use GFP_KERNEL.
457	>
458	> I bet this fixes it
459
460	It does, but the DMA API was expanded to cope with this exact case, so
461	use dma_alloc_coherent() directly in the megaraid code instead.  The dev
462	is just &pci_dev->dev.
463
464	James <James.Bottomley@SteelEye.com>
465
466	3. SYNCHRONIZE_CACHE is not supported by FW and thus blocked by driver.
467	4. Hibernation support added
468	5. Performing diskdump while running IO in RHEL 4 was failing. Fixed.
469
4701 Release Date    : Fri Feb. 09 14:36:28 PST 2007 -
471			(emaild-id:megaraidlinux@lsi.com)
472			Sumant Patro
473			Bo Yang
474
4752 Current Version : 00.00.03.09
4763 Older Version   : 00.00.03.08
477
478i.	Under heavy IO mid-layer prints "DRIVER_TIMEOUT" errors
479
480	The driver now waits for 10 seconds to elapse instead of 5 (as in
481	previous release) to resume IO.
482
4831 Release Date    : Mon Feb. 05 11:35:24 PST 2007 -
484			(emaild-id:megaraidlinux@lsi.com)
485			Sumant Patro
486			Bo Yang
4872 Current Version : 00.00.03.08
4883 Older Version   : 00.00.03.07
489
490i.	Under heavy IO mid-layer prints "DRIVER_TIMEOUT" errors
491
492	Fix:	The driver is now throttling IO.
493	Checks added in megasas_queue_command to know if FW is able to
494	process commands within timeout period. If number of retries
495	is 2 or greater,the driver stops sending cmd to FW temporarily. IO is
496	resumed if pending cmd count reduces to 16 or 5 seconds has elapsed
497	from the time cmds were last sent to FW.
498
499ii.	FW enables WCE bit in Mode Sense cmd for drives that are configured
500	as WriteBack. The OS may send "SYNCHRONIZE_CACHE" cmd when Logical
501	Disks are exposed with WCE=1. User is advised to enable Write Back
502	mode only when the controller has battery backup. At this time
503	Synhronize cache is not supported by the FW. Driver will short-cycle
504	the cmd and return success without sending down to FW.
505
5061 Release Date    : Sun Jan. 14 11:21:32 PDT 2007 -
507		 Sumant Patro <Sumant.Patro@lsil.com>/Bo Yang
5082 Current Version : 00.00.03.07
5093 Older Version   : 00.00.03.06
510
511i.	bios_param entry added in scsi_host_template that returns disk geometry
512	information.
513
5141 Release Date    : Fri Oct 20 11:21:32 PDT 2006 - Sumant Patro <Sumant.Patro@lsil.com>/Bo Yang
5152 Current Version : 00.00.03.06
5163 Older Version   : 00.00.03.05
517
5181. Added new memory management module to support the IOCTL memory allocation. For IOCTL we try to allocate from the memory pool created during driver initialization. If mem pool is empty then we allocate at run time.
5192. Added check in megasas_queue_command and dpc/isr routine to see if we have already declared adapter dead
520   (hw_crit_error=1). If hw_crit_error==1, now we donot accept any processing of pending cmds/accept any cmd from OS
521
5221 Release Date    : Mon Oct 02 11:21:32 PDT 2006 - Sumant Patro <Sumant.Patro@lsil.com>
5232 Current Version : 00.00.03.05
5243 Older Version   : 00.00.03.04
525
526i.	PCI_DEVICE macro used
527
528	Convert the pci_device_id-table of the megaraid_sas-driver to the PCI_DEVICE-macro, to safe some lines.
529
530		- Henrik Kretzschmar <henne@nachtwindheim.de>
531ii.	All compiler warnings removed
532iii.	megasas_ctrl_info struct reverted to 3.02 release
533iv.	Default value of megasas_dbg_lvl set to 0
534v.	Removing in megasas_exit the sysfs entry created for megasas_dbg_lvl
535vi.	In megasas_teardown_frame_pool(), cmd->frame was passed instead of
536	cmd->sense to pci_pool_free. Fixed. Bug was pointed out by
537	Eric Sesterhenn
538
5391 Release Date    : Wed Sep 13 14:22:51 PDT 2006 - Sumant Patro <Sumant.Patro@lsil.com>
5402 Current Version : 00.00.03.04
5413 Older Version   : 00.00.03.03
542
543i.	Added Reboot notify
544ii.	Reduced by 1 max cmds sent to FW from Driver to make the reply_q_sz same
545	as Max Cmds FW can support
546
5471 Release Date    : Tue Aug 22 16:33:14 PDT 2006 - Sumant Patro <Sumant.Patro@lsil.com>
5482 Current Version : 00.00.03.03
5493 Older Version   : 00.00.03.02
550
551i.	Send stop adapter to FW & Dump pending FW cmds before declaring adapter dead.
552	New variable added to set dbg level.
553ii.	Disable interrupt made as fn pointer as they are different for 1068 / 1078
554iii.	Frame count optimization. Main frame can contain 2 SGE for 64 bit SGLs and
555	3 SGE for 32 bit SGL
556iv.	Tasklet added for cmd completion
557v.	If FW in operational state before firing INIT, now we send RESET Flag to FW instead of just READY. This is used to do soft reset.
558vi.	megasas_ctrl_prop structure updated (based on FW struct)
559vii.	Added print : FW now in Ready State during initialization
560
5611 Release Date    : Sun Aug 06 22:49:52 PDT 2006 - Sumant Patro <Sumant.Patro@lsil.com>
5622 Current Version : 00.00.03.02
5633 Older Version   : 00.00.03.01
564
565i.	Added FW tranistion state for Hotplug scenario
566
5671 Release Date    : Sun May 14 22:49:52 PDT 2006 - Sumant Patro <Sumant.Patro@lsil.com>
5682 Current Version : 00.00.03.01
5693 Older Version   : 00.00.02.04
570
571i.	Added support for ZCR controller.
572
573		New device id 0x413 added.
574
575ii.	Bug fix : Disable controller interrupt before firing INIT cmd to FW.
576
577		Interrupt is enabled after required initialization is over.
578		This is done to ensure that driver is ready to handle interrupts when
579		it is generated by the controller.
580
581		-Sumant Patro <Sumant.Patro@lsil.com>
582
5831 Release Date    : Wed Feb 03 14:31:44 PST 2006 - Sumant Patro <Sumant.Patro@lsil.com>
5842 Current Version : 00.00.02.04
5853 Older Version   : 00.00.02.04
586
587i.	Remove superfluous instance_lock
588
589	gets rid of the otherwise superfluous instance_lock and avoids an unsafe
590	unsynchronized access in the error handler.
591
592		- Christoph Hellwig <hch@lst.de>
593
594
5951 Release Date    : Wed Feb 03 14:31:44 PST 2006 - Sumant Patro <Sumant.Patro@lsil.com>
5962 Current Version : 00.00.02.04
5973 Older Version   : 00.00.02.04
598
599i.	Support for 1078 type (ppc IOP) controller, device id : 0x60 added.
600	During initialization, depending on the device id, the template members
601	are initialized with function pointers specific to the ppc or
602	xscale controllers.
603
604		-Sumant Patro <Sumant.Patro@lsil.com>
605
6061 Release Date    : Fri Feb 03 14:16:25 PST 2006 - Sumant Patro
607							<Sumant.Patro@lsil.com>
6082 Current Version : 00.00.02.04
6093 Older Version   : 00.00.02.02
610i.	Register 16 byte CDB capability with scsi midlayer
611
612	"This patch properly registers the 16 byte command length capability of the
613	megaraid_sas controlled hardware with the scsi midlayer. All megaraid_sas
614	hardware supports 16 byte CDB's."
615
616		-Joshua Giles <joshua_giles@dell.com>
617
6181 Release Date    : Mon Jan 23 14:09:01 PST 2006 - Sumant Patro <Sumant.Patro@lsil.com>
6192 Current Version : 00.00.02.02
6203 Older Version   : 00.00.02.01
621
622i.	New template defined to represent each family of controllers (identified by processor used).
623	The template will have definitions that will be initialised to appropriate values for a specific family of controllers. The template definition has four function pointers. During driver initialisation the function pointers will be set based on the controller family type. This change is done to support new controllers that has different processors and thus different register set.
624
625		-Sumant Patro <Sumant.Patro@lsil.com>
626
6271 Release Date    : Mon Dec 19 14:36:26 PST 2005 - Sumant Patro <Sumant.Patro@lsil.com>
6282 Current Version : 00.00.02.00-rc4
6293 Older Version   : 00.00.02.01
630
631i.	Code reorganized to remove code duplication in megasas_build_cmd.
632
633	"There's a lot of duplicate code megasas_build_cmd.  Move that out of the different codepaths and merge the reminder of megasas_build_cmd into megasas_queue_command"
634
635		- Christoph Hellwig <hch@lst.de>
636
637ii.	Defined MEGASAS_IOC_FIRMWARE32 for code paths that handles 32 bit applications in 64 bit systems.
638
639	"MEGASAS_IOC_FIRMWARE can't be redefined if CONFIG_COMPAT is set, we need to define a MEGASAS_IOC_FIRMWARE32 define so native binaries continue to work"
640
641		- Christoph Hellwig <hch@lst.de>
642