1# SPDX-License-Identifier: GPL-2.0 2VERSION = 6 3PATCHLEVEL = 0 4SUBLEVEL = 0 5EXTRAVERSION = -rc7 6NAME = Hurr durr I'ma ninja sloth 7 8# *DOCUMENTATION* 9# To see a list of typical targets execute "make help" 10# More info can be located in ./README 11# Comments in this file are targeted only to the developer, do not 12# expect to learn how to build the kernel reading this file. 13 14$(if $(filter __%, $(MAKECMDGOALS)), \ 15 $(error targets prefixed with '__' are only for internal use)) 16 17# That's our default target when none is given on the command line 18PHONY := __all 19__all: 20 21# We are using a recursive build, so we need to do a little thinking 22# to get the ordering right. 23# 24# Most importantly: sub-Makefiles should only ever modify files in 25# their own directory. If in some directory we have a dependency on 26# a file in another dir (which doesn't happen often, but it's often 27# unavoidable when linking the built-in.a targets which finally 28# turn into vmlinux), we will call a sub make in that other dir, and 29# after that we are sure that everything which is in that other dir 30# is now up to date. 31# 32# The only cases where we need to modify files which have global 33# effects are thus separated out and done before the recursive 34# descending is started. They are now explicitly listed as the 35# prepare rule. 36 37ifneq ($(sub_make_done),1) 38 39# Do not use make's built-in rules and variables 40# (this increases performance and avoids hard-to-debug behaviour) 41MAKEFLAGS += -rR 42 43# Avoid funny character set dependencies 44unexport LC_ALL 45LC_COLLATE=C 46LC_NUMERIC=C 47export LC_COLLATE LC_NUMERIC 48 49# Avoid interference with shell env settings 50unexport GREP_OPTIONS 51 52# Beautify output 53# --------------------------------------------------------------------------- 54# 55# Normally, we echo the whole command before executing it. By making 56# that echo $($(quiet)$(cmd)), we now have the possibility to set 57# $(quiet) to choose other forms of output instead, e.g. 58# 59# quiet_cmd_cc_o_c = Compiling $(RELDIR)/$@ 60# cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $< 61# 62# If $(quiet) is empty, the whole command will be printed. 63# If it is set to "quiet_", only the short version will be printed. 64# If it is set to "silent_", nothing will be printed at all, since 65# the variable $(silent_cmd_cc_o_c) doesn't exist. 66# 67# A simple variant is to prefix commands with $(Q) - that's useful 68# for commands that shall be hidden in non-verbose mode. 69# 70# $(Q)ln $@ :< 71# 72# If KBUILD_VERBOSE equals 0 then the above command will be hidden. 73# If KBUILD_VERBOSE equals 1 then the above command is displayed. 74# If KBUILD_VERBOSE equals 2 then give the reason why each target is rebuilt. 75# 76# To put more focus on warnings, be less verbose as default 77# Use 'make V=1' to see the full commands 78 79ifeq ("$(origin V)", "command line") 80 KBUILD_VERBOSE = $(V) 81endif 82ifndef KBUILD_VERBOSE 83 KBUILD_VERBOSE = 0 84endif 85 86ifeq ($(KBUILD_VERBOSE),1) 87 quiet = 88 Q = 89else 90 quiet=quiet_ 91 Q = @ 92endif 93 94# If the user is running make -s (silent mode), suppress echoing of 95# commands 96 97ifneq ($(findstring s,$(filter-out --%,$(MAKEFLAGS))),) 98 quiet=silent_ 99 KBUILD_VERBOSE = 0 100endif 101 102export quiet Q KBUILD_VERBOSE 103 104# Call a source code checker (by default, "sparse") as part of the 105# C compilation. 106# 107# Use 'make C=1' to enable checking of only re-compiled files. 108# Use 'make C=2' to enable checking of *all* source files, regardless 109# of whether they are re-compiled or not. 110# 111# See the file "Documentation/dev-tools/sparse.rst" for more details, 112# including where to get the "sparse" utility. 113 114ifeq ("$(origin C)", "command line") 115 KBUILD_CHECKSRC = $(C) 116endif 117ifndef KBUILD_CHECKSRC 118 KBUILD_CHECKSRC = 0 119endif 120 121export KBUILD_CHECKSRC 122 123# Use make M=dir or set the environment variable KBUILD_EXTMOD to specify the 124# directory of external module to build. Setting M= takes precedence. 125ifeq ("$(origin M)", "command line") 126 KBUILD_EXTMOD := $(M) 127endif 128 129$(if $(word 2, $(KBUILD_EXTMOD)), \ 130 $(error building multiple external modules is not supported)) 131 132$(foreach x, % :, $(if $(findstring $x, $(KBUILD_EXTMOD)), \ 133 $(error module directory path cannot contain '$x'))) 134 135# Remove trailing slashes 136ifneq ($(filter %/, $(KBUILD_EXTMOD)),) 137KBUILD_EXTMOD := $(shell dirname $(KBUILD_EXTMOD).) 138endif 139 140export KBUILD_EXTMOD 141 142# Kbuild will save output files in the current working directory. 143# This does not need to match to the root of the kernel source tree. 144# 145# For example, you can do this: 146# 147# cd /dir/to/store/output/files; make -f /dir/to/kernel/source/Makefile 148# 149# If you want to save output files in a different location, there are 150# two syntaxes to specify it. 151# 152# 1) O= 153# Use "make O=dir/to/store/output/files/" 154# 155# 2) Set KBUILD_OUTPUT 156# Set the environment variable KBUILD_OUTPUT to point to the output directory. 157# export KBUILD_OUTPUT=dir/to/store/output/files/; make 158# 159# The O= assignment takes precedence over the KBUILD_OUTPUT environment 160# variable. 161 162# Do we want to change the working directory? 163ifeq ("$(origin O)", "command line") 164 KBUILD_OUTPUT := $(O) 165endif 166 167ifneq ($(KBUILD_OUTPUT),) 168# Make's built-in functions such as $(abspath ...), $(realpath ...) cannot 169# expand a shell special character '~'. We use a somewhat tedious way here. 170abs_objtree := $(shell mkdir -p $(KBUILD_OUTPUT) && cd $(KBUILD_OUTPUT) && pwd) 171$(if $(abs_objtree),, \ 172 $(error failed to create output directory "$(KBUILD_OUTPUT)")) 173 174# $(realpath ...) resolves symlinks 175abs_objtree := $(realpath $(abs_objtree)) 176else 177abs_objtree := $(CURDIR) 178endif # ifneq ($(KBUILD_OUTPUT),) 179 180ifeq ($(abs_objtree),$(CURDIR)) 181# Suppress "Entering directory ..." unless we are changing the work directory. 182MAKEFLAGS += --no-print-directory 183else 184need-sub-make := 1 185endif 186 187this-makefile := $(lastword $(MAKEFILE_LIST)) 188abs_srctree := $(realpath $(dir $(this-makefile))) 189 190ifneq ($(words $(subst :, ,$(abs_srctree))), 1) 191$(error source directory cannot contain spaces or colons) 192endif 193 194ifneq ($(abs_srctree),$(abs_objtree)) 195# Look for make include files relative to root of kernel src 196# 197# --included-dir is added for backward compatibility, but you should not rely on 198# it. Please add $(srctree)/ prefix to include Makefiles in the source tree. 199MAKEFLAGS += --include-dir=$(abs_srctree) 200endif 201 202ifneq ($(filter 3.%,$(MAKE_VERSION)),) 203# 'MAKEFLAGS += -rR' does not immediately become effective for GNU Make 3.x 204# We need to invoke sub-make to avoid implicit rules in the top Makefile. 205need-sub-make := 1 206# Cancel implicit rules for this Makefile. 207$(this-makefile): ; 208endif 209 210export abs_srctree abs_objtree 211export sub_make_done := 1 212 213ifeq ($(need-sub-make),1) 214 215PHONY += $(MAKECMDGOALS) __sub-make 216 217$(filter-out $(this-makefile), $(MAKECMDGOALS)) __all: __sub-make 218 @: 219 220# Invoke a second make in the output directory, passing relevant variables 221__sub-make: 222 $(Q)$(MAKE) -C $(abs_objtree) -f $(abs_srctree)/Makefile $(MAKECMDGOALS) 223 224endif # need-sub-make 225endif # sub_make_done 226 227# We process the rest of the Makefile if this is the final invocation of make 228ifeq ($(need-sub-make),) 229 230# Do not print "Entering directory ...", 231# but we want to display it when entering to the output directory 232# so that IDEs/editors are able to understand relative filenames. 233MAKEFLAGS += --no-print-directory 234 235ifeq ($(abs_srctree),$(abs_objtree)) 236 # building in the source tree 237 srctree := . 238 building_out_of_srctree := 239else 240 ifeq ($(abs_srctree)/,$(dir $(abs_objtree))) 241 # building in a subdirectory of the source tree 242 srctree := .. 243 else 244 srctree := $(abs_srctree) 245 endif 246 building_out_of_srctree := 1 247endif 248 249ifneq ($(KBUILD_ABS_SRCTREE),) 250srctree := $(abs_srctree) 251endif 252 253objtree := . 254VPATH := $(srctree) 255 256export building_out_of_srctree srctree objtree VPATH 257 258# To make sure we do not include .config for any of the *config targets 259# catch them early, and hand them over to scripts/kconfig/Makefile 260# It is allowed to specify more targets when calling make, including 261# mixing *config targets and build targets. 262# For example 'make oldconfig all'. 263# Detect when mixed targets is specified, and make a second invocation 264# of make so .config is not included in this case either (for *config). 265 266version_h := include/generated/uapi/linux/version.h 267 268clean-targets := %clean mrproper cleandocs 269no-dot-config-targets := $(clean-targets) \ 270 cscope gtags TAGS tags help% %docs check% coccicheck \ 271 $(version_h) headers headers_% archheaders archscripts \ 272 %asm-generic kernelversion %src-pkg dt_binding_check \ 273 outputmakefile 274# Installation targets should not require compiler. Unfortunately, vdso_install 275# is an exception where build artifacts may be updated. This must be fixed. 276no-compiler-targets := $(no-dot-config-targets) install dtbs_install \ 277 headers_install modules_install kernelrelease image_name 278no-sync-config-targets := $(no-dot-config-targets) %install kernelrelease \ 279 image_name 280single-targets := %.a %.i %.ko %.lds %.ll %.lst %.mod %.o %.s %.symtypes %/ 281 282config-build := 283mixed-build := 284need-config := 1 285need-compiler := 1 286may-sync-config := 1 287single-build := 288 289ifneq ($(filter $(no-dot-config-targets), $(MAKECMDGOALS)),) 290 ifeq ($(filter-out $(no-dot-config-targets), $(MAKECMDGOALS)),) 291 need-config := 292 endif 293endif 294 295ifneq ($(filter $(no-compiler-targets), $(MAKECMDGOALS)),) 296 ifeq ($(filter-out $(no-compiler-targets), $(MAKECMDGOALS)),) 297 need-compiler := 298 endif 299endif 300 301ifneq ($(filter $(no-sync-config-targets), $(MAKECMDGOALS)),) 302 ifeq ($(filter-out $(no-sync-config-targets), $(MAKECMDGOALS)),) 303 may-sync-config := 304 endif 305endif 306 307ifneq ($(KBUILD_EXTMOD),) 308 may-sync-config := 309endif 310 311ifeq ($(KBUILD_EXTMOD),) 312 ifneq ($(filter %config,$(MAKECMDGOALS)),) 313 config-build := 1 314 ifneq ($(words $(MAKECMDGOALS)),1) 315 mixed-build := 1 316 endif 317 endif 318endif 319 320# We cannot build single targets and the others at the same time 321ifneq ($(filter $(single-targets), $(MAKECMDGOALS)),) 322 single-build := 1 323 ifneq ($(filter-out $(single-targets), $(MAKECMDGOALS)),) 324 mixed-build := 1 325 endif 326endif 327 328# For "make -j clean all", "make -j mrproper defconfig all", etc. 329ifneq ($(filter $(clean-targets),$(MAKECMDGOALS)),) 330 ifneq ($(filter-out $(clean-targets),$(MAKECMDGOALS)),) 331 mixed-build := 1 332 endif 333endif 334 335# install and modules_install need also be processed one by one 336ifneq ($(filter install,$(MAKECMDGOALS)),) 337 ifneq ($(filter modules_install,$(MAKECMDGOALS)),) 338 mixed-build := 1 339 endif 340endif 341 342ifdef mixed-build 343# =========================================================================== 344# We're called with mixed targets (*config and build targets). 345# Handle them one by one. 346 347PHONY += $(MAKECMDGOALS) __build_one_by_one 348 349$(MAKECMDGOALS): __build_one_by_one 350 @: 351 352__build_one_by_one: 353 $(Q)set -e; \ 354 for i in $(MAKECMDGOALS); do \ 355 $(MAKE) -f $(srctree)/Makefile $$i; \ 356 done 357 358else # !mixed-build 359 360include $(srctree)/scripts/Kbuild.include 361 362# Read KERNELRELEASE from include/config/kernel.release (if it exists) 363KERNELRELEASE = $(shell cat include/config/kernel.release 2> /dev/null) 364KERNELVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION) 365export VERSION PATCHLEVEL SUBLEVEL KERNELRELEASE KERNELVERSION 366 367include $(srctree)/scripts/subarch.include 368 369# Cross compiling and selecting different set of gcc/bin-utils 370# --------------------------------------------------------------------------- 371# 372# When performing cross compilation for other architectures ARCH shall be set 373# to the target architecture. (See arch/* for the possibilities). 374# ARCH can be set during invocation of make: 375# make ARCH=ia64 376# Another way is to have ARCH set in the environment. 377# The default ARCH is the host where make is executed. 378 379# CROSS_COMPILE specify the prefix used for all executables used 380# during compilation. Only gcc and related bin-utils executables 381# are prefixed with $(CROSS_COMPILE). 382# CROSS_COMPILE can be set on the command line 383# make CROSS_COMPILE=ia64-linux- 384# Alternatively CROSS_COMPILE can be set in the environment. 385# Default value for CROSS_COMPILE is not to prefix executables 386# Note: Some architectures assign CROSS_COMPILE in their arch/*/Makefile 387ARCH ?= $(SUBARCH) 388 389# Architecture as present in compile.h 390UTS_MACHINE := $(ARCH) 391SRCARCH := $(ARCH) 392 393# Additional ARCH settings for x86 394ifeq ($(ARCH),i386) 395 SRCARCH := x86 396endif 397ifeq ($(ARCH),x86_64) 398 SRCARCH := x86 399endif 400 401# Additional ARCH settings for sparc 402ifeq ($(ARCH),sparc32) 403 SRCARCH := sparc 404endif 405ifeq ($(ARCH),sparc64) 406 SRCARCH := sparc 407endif 408 409# Additional ARCH settings for parisc 410ifeq ($(ARCH),parisc64) 411 SRCARCH := parisc 412endif 413 414export cross_compiling := 415ifneq ($(SRCARCH),$(SUBARCH)) 416cross_compiling := 1 417endif 418 419KCONFIG_CONFIG ?= .config 420export KCONFIG_CONFIG 421 422# SHELL used by kbuild 423CONFIG_SHELL := sh 424 425HOST_LFS_CFLAGS := $(shell getconf LFS_CFLAGS 2>/dev/null) 426HOST_LFS_LDFLAGS := $(shell getconf LFS_LDFLAGS 2>/dev/null) 427HOST_LFS_LIBS := $(shell getconf LFS_LIBS 2>/dev/null) 428 429ifneq ($(LLVM),) 430ifneq ($(filter %/,$(LLVM)),) 431LLVM_PREFIX := $(LLVM) 432else ifneq ($(filter -%,$(LLVM)),) 433LLVM_SUFFIX := $(LLVM) 434endif 435 436HOSTCC = $(LLVM_PREFIX)clang$(LLVM_SUFFIX) 437HOSTCXX = $(LLVM_PREFIX)clang++$(LLVM_SUFFIX) 438else 439HOSTCC = gcc 440HOSTCXX = g++ 441endif 442HOSTPKG_CONFIG = pkg-config 443 444KBUILD_USERHOSTCFLAGS := -Wall -Wmissing-prototypes -Wstrict-prototypes \ 445 -O2 -fomit-frame-pointer -std=gnu11 \ 446 -Wdeclaration-after-statement 447KBUILD_USERCFLAGS := $(KBUILD_USERHOSTCFLAGS) $(USERCFLAGS) 448KBUILD_USERLDFLAGS := $(USERLDFLAGS) 449 450KBUILD_HOSTCFLAGS := $(KBUILD_USERHOSTCFLAGS) $(HOST_LFS_CFLAGS) $(HOSTCFLAGS) 451KBUILD_HOSTCXXFLAGS := -Wall -O2 $(HOST_LFS_CFLAGS) $(HOSTCXXFLAGS) 452KBUILD_HOSTLDFLAGS := $(HOST_LFS_LDFLAGS) $(HOSTLDFLAGS) 453KBUILD_HOSTLDLIBS := $(HOST_LFS_LIBS) $(HOSTLDLIBS) 454 455# Make variables (CC, etc...) 456CPP = $(CC) -E 457ifneq ($(LLVM),) 458CC = $(LLVM_PREFIX)clang$(LLVM_SUFFIX) 459LD = $(LLVM_PREFIX)ld.lld$(LLVM_SUFFIX) 460AR = $(LLVM_PREFIX)llvm-ar$(LLVM_SUFFIX) 461NM = $(LLVM_PREFIX)llvm-nm$(LLVM_SUFFIX) 462OBJCOPY = $(LLVM_PREFIX)llvm-objcopy$(LLVM_SUFFIX) 463OBJDUMP = $(LLVM_PREFIX)llvm-objdump$(LLVM_SUFFIX) 464READELF = $(LLVM_PREFIX)llvm-readelf$(LLVM_SUFFIX) 465STRIP = $(LLVM_PREFIX)llvm-strip$(LLVM_SUFFIX) 466else 467CC = $(CROSS_COMPILE)gcc 468LD = $(CROSS_COMPILE)ld 469AR = $(CROSS_COMPILE)ar 470NM = $(CROSS_COMPILE)nm 471OBJCOPY = $(CROSS_COMPILE)objcopy 472OBJDUMP = $(CROSS_COMPILE)objdump 473READELF = $(CROSS_COMPILE)readelf 474STRIP = $(CROSS_COMPILE)strip 475endif 476PAHOLE = pahole 477RESOLVE_BTFIDS = $(objtree)/tools/bpf/resolve_btfids/resolve_btfids 478LEX = flex 479YACC = bison 480AWK = awk 481INSTALLKERNEL := installkernel 482DEPMOD = depmod 483PERL = perl 484PYTHON3 = python3 485CHECK = sparse 486BASH = bash 487KGZIP = gzip 488KBZIP2 = bzip2 489KLZOP = lzop 490LZMA = lzma 491LZ4 = lz4c 492XZ = xz 493ZSTD = zstd 494 495PAHOLE_FLAGS = $(shell PAHOLE=$(PAHOLE) $(srctree)/scripts/pahole-flags.sh) 496 497CHECKFLAGS := -D__linux__ -Dlinux -D__STDC__ -Dunix -D__unix__ \ 498 -Wbitwise -Wno-return-void -Wno-unknown-attribute $(CF) 499NOSTDINC_FLAGS := 500CFLAGS_MODULE = 501AFLAGS_MODULE = 502LDFLAGS_MODULE = 503CFLAGS_KERNEL = 504AFLAGS_KERNEL = 505LDFLAGS_vmlinux = 506 507# Use USERINCLUDE when you must reference the UAPI directories only. 508USERINCLUDE := \ 509 -I$(srctree)/arch/$(SRCARCH)/include/uapi \ 510 -I$(objtree)/arch/$(SRCARCH)/include/generated/uapi \ 511 -I$(srctree)/include/uapi \ 512 -I$(objtree)/include/generated/uapi \ 513 -include $(srctree)/include/linux/compiler-version.h \ 514 -include $(srctree)/include/linux/kconfig.h 515 516# Use LINUXINCLUDE when you must reference the include/ directory. 517# Needed to be compatible with the O= option 518LINUXINCLUDE := \ 519 -I$(srctree)/arch/$(SRCARCH)/include \ 520 -I$(objtree)/arch/$(SRCARCH)/include/generated \ 521 $(if $(building_out_of_srctree),-I$(srctree)/include) \ 522 -I$(objtree)/include \ 523 $(USERINCLUDE) 524 525KBUILD_AFLAGS := -D__ASSEMBLY__ -fno-PIE 526KBUILD_CFLAGS := -Wall -Wundef -Werror=strict-prototypes -Wno-trigraphs \ 527 -fno-strict-aliasing -fno-common -fshort-wchar -fno-PIE \ 528 -Werror=implicit-function-declaration -Werror=implicit-int \ 529 -Werror=return-type -Wno-format-security \ 530 -std=gnu11 531KBUILD_CPPFLAGS := -D__KERNEL__ 532KBUILD_AFLAGS_KERNEL := 533KBUILD_CFLAGS_KERNEL := 534KBUILD_AFLAGS_MODULE := -DMODULE 535KBUILD_CFLAGS_MODULE := -DMODULE 536KBUILD_LDFLAGS_MODULE := 537KBUILD_LDFLAGS := 538CLANG_FLAGS := 539 540export ARCH SRCARCH CONFIG_SHELL BASH HOSTCC KBUILD_HOSTCFLAGS CROSS_COMPILE LD CC HOSTPKG_CONFIG 541export CPP AR NM STRIP OBJCOPY OBJDUMP READELF PAHOLE RESOLVE_BTFIDS LEX YACC AWK INSTALLKERNEL 542export PERL PYTHON3 CHECK CHECKFLAGS MAKE UTS_MACHINE HOSTCXX 543export KGZIP KBZIP2 KLZOP LZMA LZ4 XZ ZSTD 544export KBUILD_HOSTCXXFLAGS KBUILD_HOSTLDFLAGS KBUILD_HOSTLDLIBS LDFLAGS_MODULE 545export KBUILD_USERCFLAGS KBUILD_USERLDFLAGS 546 547export KBUILD_CPPFLAGS NOSTDINC_FLAGS LINUXINCLUDE OBJCOPYFLAGS KBUILD_LDFLAGS 548export KBUILD_CFLAGS CFLAGS_KERNEL CFLAGS_MODULE 549export KBUILD_AFLAGS AFLAGS_KERNEL AFLAGS_MODULE 550export KBUILD_AFLAGS_MODULE KBUILD_CFLAGS_MODULE KBUILD_LDFLAGS_MODULE 551export KBUILD_AFLAGS_KERNEL KBUILD_CFLAGS_KERNEL 552export PAHOLE_FLAGS 553 554# Files to ignore in find ... statements 555 556export RCS_FIND_IGNORE := \( -name SCCS -o -name BitKeeper -o -name .svn -o \ 557 -name CVS -o -name .pc -o -name .hg -o -name .git \) \ 558 -prune -o 559export RCS_TAR_IGNORE := --exclude SCCS --exclude BitKeeper --exclude .svn \ 560 --exclude CVS --exclude .pc --exclude .hg --exclude .git 561 562# =========================================================================== 563# Rules shared between *config targets and build targets 564 565# Basic helpers built in scripts/basic/ 566PHONY += scripts_basic 567scripts_basic: 568 $(Q)$(MAKE) $(build)=scripts/basic 569 570PHONY += outputmakefile 571ifdef building_out_of_srctree 572# Before starting out-of-tree build, make sure the source tree is clean. 573# outputmakefile generates a Makefile in the output directory, if using a 574# separate output directory. This allows convenient use of make in the 575# output directory. 576# At the same time when output Makefile generated, generate .gitignore to 577# ignore whole output directory 578 579quiet_cmd_makefile = GEN Makefile 580 cmd_makefile = { \ 581 echo "\# Automatically generated by $(srctree)/Makefile: don't edit"; \ 582 echo "include $(srctree)/Makefile"; \ 583 } > Makefile 584 585outputmakefile: 586 $(Q)if [ -f $(srctree)/.config -o \ 587 -d $(srctree)/include/config -o \ 588 -d $(srctree)/arch/$(SRCARCH)/include/generated ]; then \ 589 echo >&2 "***"; \ 590 echo >&2 "*** The source tree is not clean, please run 'make$(if $(findstring command line, $(origin ARCH)), ARCH=$(ARCH)) mrproper'"; \ 591 echo >&2 "*** in $(abs_srctree)";\ 592 echo >&2 "***"; \ 593 false; \ 594 fi 595 $(Q)ln -fsn $(srctree) source 596 $(call cmd,makefile) 597 $(Q)test -e .gitignore || \ 598 { echo "# this is build directory, ignore it"; echo "*"; } > .gitignore 599endif 600 601# The expansion should be delayed until arch/$(SRCARCH)/Makefile is included. 602# Some architectures define CROSS_COMPILE in arch/$(SRCARCH)/Makefile. 603# CC_VERSION_TEXT is referenced from Kconfig (so it needs export), 604# and from include/config/auto.conf.cmd to detect the compiler upgrade. 605CC_VERSION_TEXT = $(subst $(pound),,$(shell LC_ALL=C $(CC) --version 2>/dev/null | head -n 1)) 606 607ifneq ($(findstring clang,$(CC_VERSION_TEXT)),) 608include $(srctree)/scripts/Makefile.clang 609endif 610 611# Include this also for config targets because some architectures need 612# cc-cross-prefix to determine CROSS_COMPILE. 613ifdef need-compiler 614include $(srctree)/scripts/Makefile.compiler 615endif 616 617ifdef config-build 618# =========================================================================== 619# *config targets only - make sure prerequisites are updated, and descend 620# in scripts/kconfig to make the *config target 621 622# Read arch specific Makefile to set KBUILD_DEFCONFIG as needed. 623# KBUILD_DEFCONFIG may point out an alternative default configuration 624# used for 'make defconfig' 625include $(srctree)/arch/$(SRCARCH)/Makefile 626export KBUILD_DEFCONFIG KBUILD_KCONFIG CC_VERSION_TEXT 627 628config: outputmakefile scripts_basic FORCE 629 $(Q)$(MAKE) $(build)=scripts/kconfig $@ 630 631%config: outputmakefile scripts_basic FORCE 632 $(Q)$(MAKE) $(build)=scripts/kconfig $@ 633 634else #!config-build 635# =========================================================================== 636# Build targets only - this includes vmlinux, arch specific targets, clean 637# targets and others. In general all targets except *config targets. 638 639# If building an external module we do not care about the all: rule 640# but instead __all depend on modules 641PHONY += all 642ifeq ($(KBUILD_EXTMOD),) 643__all: all 644else 645__all: modules 646endif 647 648# Decide whether to build built-in, modular, or both. 649# Normally, just do built-in. 650 651KBUILD_MODULES := 652KBUILD_BUILTIN := 1 653 654# If we have only "make modules", don't compile built-in objects. 655ifeq ($(MAKECMDGOALS),modules) 656 KBUILD_BUILTIN := 657endif 658 659# If we have "make <whatever> modules", compile modules 660# in addition to whatever we do anyway. 661# Just "make" or "make all" shall build modules as well 662 663ifneq ($(filter all modules nsdeps %compile_commands.json clang-%,$(MAKECMDGOALS)),) 664 KBUILD_MODULES := 1 665endif 666 667ifeq ($(MAKECMDGOALS),) 668 KBUILD_MODULES := 1 669endif 670 671export KBUILD_MODULES KBUILD_BUILTIN 672 673ifdef need-config 674include include/config/auto.conf 675endif 676 677ifeq ($(KBUILD_EXTMOD),) 678# Objects we will link into vmlinux / subdirs we need to visit 679core-y := 680drivers-y := 681libs-y := lib/ 682endif # KBUILD_EXTMOD 683 684# The all: target is the default when no target is given on the 685# command line. 686# This allow a user to issue only 'make' to build a kernel including modules 687# Defaults to vmlinux, but the arch makefile usually adds further targets 688all: vmlinux 689 690CFLAGS_GCOV := -fprofile-arcs -ftest-coverage 691ifdef CONFIG_CC_IS_GCC 692CFLAGS_GCOV += -fno-tree-loop-im 693endif 694export CFLAGS_GCOV 695 696# The arch Makefiles can override CC_FLAGS_FTRACE. We may also append it later. 697ifdef CONFIG_FUNCTION_TRACER 698 CC_FLAGS_FTRACE := -pg 699endif 700 701include $(srctree)/arch/$(SRCARCH)/Makefile 702 703ifdef need-config 704ifdef may-sync-config 705# Read in dependencies to all Kconfig* files, make sure to run syncconfig if 706# changes are detected. This should be included after arch/$(SRCARCH)/Makefile 707# because some architectures define CROSS_COMPILE there. 708include include/config/auto.conf.cmd 709 710$(KCONFIG_CONFIG): 711 @echo >&2 '***' 712 @echo >&2 '*** Configuration file "$@" not found!' 713 @echo >&2 '***' 714 @echo >&2 '*** Please run some configurator (e.g. "make oldconfig" or' 715 @echo >&2 '*** "make menuconfig" or "make xconfig").' 716 @echo >&2 '***' 717 @/bin/false 718 719# The actual configuration files used during the build are stored in 720# include/generated/ and include/config/. Update them if .config is newer than 721# include/config/auto.conf (which mirrors .config). 722# 723# This exploits the 'multi-target pattern rule' trick. 724# The syncconfig should be executed only once to make all the targets. 725# (Note: use the grouped target '&:' when we bump to GNU Make 4.3) 726# 727# Do not use $(call cmd,...) here. That would suppress prompts from syncconfig, 728# so you cannot notice that Kconfig is waiting for the user input. 729%/config/auto.conf %/config/auto.conf.cmd %/generated/autoconf.h: $(KCONFIG_CONFIG) 730 $(Q)$(kecho) " SYNC $@" 731 $(Q)$(MAKE) -f $(srctree)/Makefile syncconfig 732else # !may-sync-config 733# External modules and some install targets need include/generated/autoconf.h 734# and include/config/auto.conf but do not care if they are up-to-date. 735# Use auto.conf to trigger the test 736PHONY += include/config/auto.conf 737 738include/config/auto.conf: 739 $(Q)test -e include/generated/autoconf.h -a -e $@ || ( \ 740 echo >&2; \ 741 echo >&2 " ERROR: Kernel configuration is invalid."; \ 742 echo >&2 " include/generated/autoconf.h or $@ are missing.";\ 743 echo >&2 " Run 'make oldconfig && make prepare' on kernel src to fix it."; \ 744 echo >&2 ; \ 745 /bin/false) 746 747endif # may-sync-config 748endif # need-config 749 750KBUILD_CFLAGS += -fno-delete-null-pointer-checks 751KBUILD_CFLAGS += $(call cc-disable-warning,frame-address,) 752KBUILD_CFLAGS += $(call cc-disable-warning, format-truncation) 753KBUILD_CFLAGS += $(call cc-disable-warning, format-overflow) 754KBUILD_CFLAGS += $(call cc-disable-warning, address-of-packed-member) 755 756ifdef CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE 757KBUILD_CFLAGS += -O2 758else ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE 759KBUILD_CFLAGS += -Os 760endif 761 762# Tell gcc to never replace conditional load with a non-conditional one 763ifdef CONFIG_CC_IS_GCC 764# gcc-10 renamed --param=allow-store-data-races=0 to 765# -fno-allow-store-data-races. 766KBUILD_CFLAGS += $(call cc-option,--param=allow-store-data-races=0) 767KBUILD_CFLAGS += $(call cc-option,-fno-allow-store-data-races) 768endif 769 770ifdef CONFIG_READABLE_ASM 771# Disable optimizations that make assembler listings hard to read. 772# reorder blocks reorders the control in the function 773# ipa clone creates specialized cloned functions 774# partial inlining inlines only parts of functions 775KBUILD_CFLAGS += -fno-reorder-blocks -fno-ipa-cp-clone -fno-partial-inlining 776endif 777 778ifneq ($(CONFIG_FRAME_WARN),0) 779KBUILD_CFLAGS += -Wframe-larger-than=$(CONFIG_FRAME_WARN) 780endif 781 782stackp-flags-y := -fno-stack-protector 783stackp-flags-$(CONFIG_STACKPROTECTOR) := -fstack-protector 784stackp-flags-$(CONFIG_STACKPROTECTOR_STRONG) := -fstack-protector-strong 785 786KBUILD_CFLAGS += $(stackp-flags-y) 787 788KBUILD_CFLAGS-$(CONFIG_WERROR) += -Werror 789KBUILD_CFLAGS-$(CONFIG_CC_NO_ARRAY_BOUNDS) += -Wno-array-bounds 790 791ifdef CONFIG_CC_IS_CLANG 792KBUILD_CPPFLAGS += -Qunused-arguments 793# The kernel builds with '-std=gnu11' so use of GNU extensions is acceptable. 794KBUILD_CFLAGS += -Wno-gnu 795else 796 797# gcc inanely warns about local variables called 'main' 798KBUILD_CFLAGS += -Wno-main 799endif 800 801# These warnings generated too much noise in a regular build. 802# Use make W=1 to enable them (see scripts/Makefile.extrawarn) 803KBUILD_CFLAGS += $(call cc-disable-warning, unused-but-set-variable) 804KBUILD_CFLAGS += $(call cc-disable-warning, unused-const-variable) 805 806# These result in bogus false positives 807KBUILD_CFLAGS += $(call cc-disable-warning, dangling-pointer) 808 809ifdef CONFIG_FRAME_POINTER 810KBUILD_CFLAGS += -fno-omit-frame-pointer -fno-optimize-sibling-calls 811else 812# Some targets (ARM with Thumb2, for example), can't be built with frame 813# pointers. For those, we don't have FUNCTION_TRACER automatically 814# select FRAME_POINTER. However, FUNCTION_TRACER adds -pg, and this is 815# incompatible with -fomit-frame-pointer with current GCC, so we don't use 816# -fomit-frame-pointer with FUNCTION_TRACER. 817ifndef CONFIG_FUNCTION_TRACER 818KBUILD_CFLAGS += -fomit-frame-pointer 819endif 820endif 821 822# Initialize all stack variables with a 0xAA pattern. 823ifdef CONFIG_INIT_STACK_ALL_PATTERN 824KBUILD_CFLAGS += -ftrivial-auto-var-init=pattern 825endif 826 827# Initialize all stack variables with a zero value. 828ifdef CONFIG_INIT_STACK_ALL_ZERO 829KBUILD_CFLAGS += -ftrivial-auto-var-init=zero 830ifdef CONFIG_CC_IS_CLANG 831# https://bugs.llvm.org/show_bug.cgi?id=45497 832KBUILD_CFLAGS += -enable-trivial-auto-var-init-zero-knowing-it-will-be-removed-from-clang 833endif 834endif 835 836# While VLAs have been removed, GCC produces unreachable stack probes 837# for the randomize_kstack_offset feature. Disable it for all compilers. 838KBUILD_CFLAGS += $(call cc-option, -fno-stack-clash-protection) 839 840# Clear used registers at func exit (to reduce data lifetime and ROP gadgets). 841ifdef CONFIG_ZERO_CALL_USED_REGS 842KBUILD_CFLAGS += -fzero-call-used-regs=used-gpr 843endif 844 845ifdef CONFIG_FUNCTION_TRACER 846ifdef CONFIG_FTRACE_MCOUNT_USE_CC 847 CC_FLAGS_FTRACE += -mrecord-mcount 848 ifdef CONFIG_HAVE_NOP_MCOUNT 849 ifeq ($(call cc-option-yn, -mnop-mcount),y) 850 CC_FLAGS_FTRACE += -mnop-mcount 851 CC_FLAGS_USING += -DCC_USING_NOP_MCOUNT 852 endif 853 endif 854endif 855ifdef CONFIG_FTRACE_MCOUNT_USE_OBJTOOL 856 CC_FLAGS_USING += -DCC_USING_NOP_MCOUNT 857endif 858ifdef CONFIG_FTRACE_MCOUNT_USE_RECORDMCOUNT 859 ifdef CONFIG_HAVE_C_RECORDMCOUNT 860 BUILD_C_RECORDMCOUNT := y 861 export BUILD_C_RECORDMCOUNT 862 endif 863endif 864ifdef CONFIG_HAVE_FENTRY 865 # s390-linux-gnu-gcc did not support -mfentry until gcc-9. 866 ifeq ($(call cc-option-yn, -mfentry),y) 867 CC_FLAGS_FTRACE += -mfentry 868 CC_FLAGS_USING += -DCC_USING_FENTRY 869 endif 870endif 871export CC_FLAGS_FTRACE 872KBUILD_CFLAGS += $(CC_FLAGS_FTRACE) $(CC_FLAGS_USING) 873KBUILD_AFLAGS += $(CC_FLAGS_USING) 874endif 875 876# We trigger additional mismatches with less inlining 877ifdef CONFIG_DEBUG_SECTION_MISMATCH 878KBUILD_CFLAGS += -fno-inline-functions-called-once 879endif 880 881ifdef CONFIG_LD_DEAD_CODE_DATA_ELIMINATION 882KBUILD_CFLAGS_KERNEL += -ffunction-sections -fdata-sections 883LDFLAGS_vmlinux += --gc-sections 884endif 885 886ifdef CONFIG_SHADOW_CALL_STACK 887CC_FLAGS_SCS := -fsanitize=shadow-call-stack 888KBUILD_CFLAGS += $(CC_FLAGS_SCS) 889export CC_FLAGS_SCS 890endif 891 892ifdef CONFIG_LTO_CLANG 893ifdef CONFIG_LTO_CLANG_THIN 894CC_FLAGS_LTO := -flto=thin -fsplit-lto-unit 895KBUILD_LDFLAGS += --thinlto-cache-dir=$(extmod_prefix).thinlto-cache 896else 897CC_FLAGS_LTO := -flto 898endif 899CC_FLAGS_LTO += -fvisibility=hidden 900 901# Limit inlining across translation units to reduce binary size 902KBUILD_LDFLAGS += -mllvm -import-instr-limit=5 903 904# Check for frame size exceeding threshold during prolog/epilog insertion 905# when using lld < 13.0.0. 906ifneq ($(CONFIG_FRAME_WARN),0) 907ifeq ($(shell test $(CONFIG_LLD_VERSION) -lt 130000; echo $$?),0) 908KBUILD_LDFLAGS += -plugin-opt=-warn-stack-size=$(CONFIG_FRAME_WARN) 909endif 910endif 911endif 912 913ifdef CONFIG_LTO 914KBUILD_CFLAGS += -fno-lto $(CC_FLAGS_LTO) 915KBUILD_AFLAGS += -fno-lto 916export CC_FLAGS_LTO 917endif 918 919ifdef CONFIG_CFI_CLANG 920CC_FLAGS_CFI := -fsanitize=cfi \ 921 -fsanitize-cfi-cross-dso \ 922 -fno-sanitize-cfi-canonical-jump-tables \ 923 -fno-sanitize-trap=cfi \ 924 -fno-sanitize-blacklist 925 926ifdef CONFIG_CFI_PERMISSIVE 927CC_FLAGS_CFI += -fsanitize-recover=cfi 928endif 929 930# If LTO flags are filtered out, we must also filter out CFI. 931CC_FLAGS_LTO += $(CC_FLAGS_CFI) 932KBUILD_CFLAGS += $(CC_FLAGS_CFI) 933export CC_FLAGS_CFI 934endif 935 936ifdef CONFIG_DEBUG_FORCE_FUNCTION_ALIGN_64B 937KBUILD_CFLAGS += -falign-functions=64 938endif 939 940# arch Makefile may override CC so keep this after arch Makefile is included 941NOSTDINC_FLAGS += -nostdinc 942 943# warn about C99 declaration after statement 944KBUILD_CFLAGS += -Wdeclaration-after-statement 945 946# Variable Length Arrays (VLAs) should not be used anywhere in the kernel 947KBUILD_CFLAGS += -Wvla 948 949# disable pointer signed / unsigned warnings in gcc 4.0 950KBUILD_CFLAGS += -Wno-pointer-sign 951 952# In order to make sure new function cast mismatches are not introduced 953# in the kernel (to avoid tripping CFI checking), the kernel should be 954# globally built with -Wcast-function-type. 955KBUILD_CFLAGS += $(call cc-option, -Wcast-function-type) 956 957# disable stringop warnings in gcc 8+ 958KBUILD_CFLAGS += $(call cc-disable-warning, stringop-truncation) 959 960# We'll want to enable this eventually, but it's not going away for 5.7 at least 961KBUILD_CFLAGS += $(call cc-disable-warning, stringop-overflow) 962 963# Another good warning that we'll want to enable eventually 964KBUILD_CFLAGS += $(call cc-disable-warning, restrict) 965 966# Enabled with W=2, disabled by default as noisy 967ifdef CONFIG_CC_IS_GCC 968KBUILD_CFLAGS += -Wno-maybe-uninitialized 969endif 970 971# The allocators already balk at large sizes, so silence the compiler 972# warnings for bounds checks involving those possible values. While 973# -Wno-alloc-size-larger-than would normally be used here, earlier versions 974# of gcc (<9.1) weirdly don't handle the option correctly when _other_ 975# warnings are produced (?!). Using -Walloc-size-larger-than=SIZE_MAX 976# doesn't work (as it is documented to), silently resolving to "0" prior to 977# version 9.1 (and producing an error more recently). Numeric values larger 978# than PTRDIFF_MAX also don't work prior to version 9.1, which are silently 979# ignored, continuing to default to PTRDIFF_MAX. So, left with no other 980# choice, we must perform a versioned check to disable this warning. 981# https://lore.kernel.org/lkml/20210824115859.187f272f@canb.auug.org.au 982KBUILD_CFLAGS-$(call gcc-min-version, 90100) += -Wno-alloc-size-larger-than 983KBUILD_CFLAGS += $(KBUILD_CFLAGS-y) $(CONFIG_CC_IMPLICIT_FALLTHROUGH) 984 985# disable invalid "can't wrap" optimizations for signed / pointers 986KBUILD_CFLAGS += -fno-strict-overflow 987 988# Make sure -fstack-check isn't enabled (like gentoo apparently did) 989KBUILD_CFLAGS += -fno-stack-check 990 991# conserve stack if available 992ifdef CONFIG_CC_IS_GCC 993KBUILD_CFLAGS += -fconserve-stack 994endif 995 996# Prohibit date/time macros, which would make the build non-deterministic 997KBUILD_CFLAGS += -Werror=date-time 998 999# enforce correct pointer usage 1000KBUILD_CFLAGS += $(call cc-option,-Werror=incompatible-pointer-types) 1001 1002# Require designated initializers for all marked structures 1003KBUILD_CFLAGS += $(call cc-option,-Werror=designated-init) 1004 1005# change __FILE__ to the relative path from the srctree 1006KBUILD_CPPFLAGS += $(call cc-option,-fmacro-prefix-map=$(srctree)/=) 1007 1008# include additional Makefiles when needed 1009include-y := scripts/Makefile.extrawarn 1010include-$(CONFIG_DEBUG_INFO) += scripts/Makefile.debug 1011include-$(CONFIG_KASAN) += scripts/Makefile.kasan 1012include-$(CONFIG_KCSAN) += scripts/Makefile.kcsan 1013include-$(CONFIG_UBSAN) += scripts/Makefile.ubsan 1014include-$(CONFIG_KCOV) += scripts/Makefile.kcov 1015include-$(CONFIG_RANDSTRUCT) += scripts/Makefile.randstruct 1016include-$(CONFIG_GCC_PLUGINS) += scripts/Makefile.gcc-plugins 1017 1018include $(addprefix $(srctree)/, $(include-y)) 1019 1020# scripts/Makefile.gcc-plugins is intentionally included last. 1021# Do not add $(call cc-option,...) below this line. When you build the kernel 1022# from the clean source tree, the GCC plugins do not exist at this point. 1023 1024# Add user supplied CPPFLAGS, AFLAGS and CFLAGS as the last assignments 1025KBUILD_CPPFLAGS += $(KCPPFLAGS) 1026KBUILD_AFLAGS += $(KAFLAGS) 1027KBUILD_CFLAGS += $(KCFLAGS) 1028 1029KBUILD_LDFLAGS_MODULE += --build-id=sha1 1030LDFLAGS_vmlinux += --build-id=sha1 1031 1032KBUILD_LDFLAGS += -z noexecstack 1033ifeq ($(CONFIG_LD_IS_BFD),y) 1034KBUILD_LDFLAGS += $(call ld-option,--no-warn-rwx-segments) 1035endif 1036 1037ifeq ($(CONFIG_STRIP_ASM_SYMS),y) 1038LDFLAGS_vmlinux += $(call ld-option, -X,) 1039endif 1040 1041ifeq ($(CONFIG_RELR),y) 1042LDFLAGS_vmlinux += --pack-dyn-relocs=relr --use-android-relr-tags 1043endif 1044 1045# We never want expected sections to be placed heuristically by the 1046# linker. All sections should be explicitly named in the linker script. 1047ifdef CONFIG_LD_ORPHAN_WARN 1048LDFLAGS_vmlinux += --orphan-handling=warn 1049endif 1050 1051# Align the bit size of userspace programs with the kernel 1052KBUILD_USERCFLAGS += $(filter -m32 -m64 --target=%, $(KBUILD_CFLAGS)) 1053KBUILD_USERLDFLAGS += $(filter -m32 -m64 --target=%, $(KBUILD_CFLAGS)) 1054 1055# make the checker run with the right architecture 1056CHECKFLAGS += --arch=$(ARCH) 1057 1058# insure the checker run with the right endianness 1059CHECKFLAGS += $(if $(CONFIG_CPU_BIG_ENDIAN),-mbig-endian,-mlittle-endian) 1060 1061# the checker needs the correct machine size 1062CHECKFLAGS += $(if $(CONFIG_64BIT),-m64,-m32) 1063 1064# Default kernel image to build when no specific target is given. 1065# KBUILD_IMAGE may be overruled on the command line or 1066# set in the environment 1067# Also any assignments in arch/$(ARCH)/Makefile take precedence over 1068# this default value 1069export KBUILD_IMAGE ?= vmlinux 1070 1071# 1072# INSTALL_PATH specifies where to place the updated kernel and system map 1073# images. Default is /boot, but you can set it to other values 1074export INSTALL_PATH ?= /boot 1075 1076# 1077# INSTALL_DTBS_PATH specifies a prefix for relocations required by build roots. 1078# Like INSTALL_MOD_PATH, it isn't defined in the Makefile, but can be passed as 1079# an argument if needed. Otherwise it defaults to the kernel install path 1080# 1081export INSTALL_DTBS_PATH ?= $(INSTALL_PATH)/dtbs/$(KERNELRELEASE) 1082 1083# 1084# INSTALL_MOD_PATH specifies a prefix to MODLIB for module directory 1085# relocations required by build roots. This is not defined in the 1086# makefile but the argument can be passed to make if needed. 1087# 1088 1089MODLIB = $(INSTALL_MOD_PATH)/lib/modules/$(KERNELRELEASE) 1090export MODLIB 1091 1092PHONY += prepare0 1093 1094export extmod_prefix = $(if $(KBUILD_EXTMOD),$(KBUILD_EXTMOD)/) 1095export MODORDER := $(extmod_prefix)modules.order 1096export MODULES_NSDEPS := $(extmod_prefix)modules.nsdeps 1097 1098ifeq ($(KBUILD_EXTMOD),) 1099 1100build-dir := . 1101clean-dirs := $(sort . Documentation \ 1102 $(patsubst %/,%,$(filter %/, $(core-) \ 1103 $(drivers-) $(libs-)))) 1104 1105export ARCH_CORE := $(core-y) 1106export ARCH_LIB := $(filter %/, $(libs-y)) 1107export ARCH_DRIVERS := $(drivers-y) $(drivers-m) 1108# Externally visible symbols (used by link-vmlinux.sh) 1109 1110KBUILD_VMLINUX_OBJS := $(head-y) ./built-in.a 1111ifdef CONFIG_MODULES 1112KBUILD_VMLINUX_OBJS += $(patsubst %/, %/lib.a, $(filter %/, $(libs-y))) 1113KBUILD_VMLINUX_LIBS := $(filter-out %/, $(libs-y)) 1114else 1115KBUILD_VMLINUX_LIBS := $(patsubst %/,%/lib.a, $(libs-y)) 1116endif 1117 1118export KBUILD_VMLINUX_OBJS KBUILD_VMLINUX_LIBS 1119export KBUILD_LDS := arch/$(SRCARCH)/kernel/vmlinux.lds 1120 1121vmlinux-deps := $(KBUILD_LDS) $(KBUILD_VMLINUX_OBJS) $(KBUILD_VMLINUX_LIBS) 1122 1123# Recurse until adjust_autoksyms.sh is satisfied 1124PHONY += autoksyms_recursive 1125ifdef CONFIG_TRIM_UNUSED_KSYMS 1126# For the kernel to actually contain only the needed exported symbols, 1127# we have to build modules as well to determine what those symbols are. 1128# (this can be evaluated only once include/config/auto.conf has been included) 1129KBUILD_MODULES := 1 1130 1131autoksyms_recursive: $(build-dir) modules.order 1132 $(Q)$(CONFIG_SHELL) $(srctree)/scripts/adjust_autoksyms.sh \ 1133 "$(MAKE) -f $(srctree)/Makefile autoksyms_recursive" 1134endif 1135 1136autoksyms_h := $(if $(CONFIG_TRIM_UNUSED_KSYMS), include/generated/autoksyms.h) 1137 1138quiet_cmd_autoksyms_h = GEN $@ 1139 cmd_autoksyms_h = mkdir -p $(dir $@); \ 1140 $(CONFIG_SHELL) $(srctree)/scripts/gen_autoksyms.sh $@ 1141 1142$(autoksyms_h): 1143 $(call cmd,autoksyms_h) 1144 1145ARCH_POSTLINK := $(wildcard $(srctree)/arch/$(SRCARCH)/Makefile.postlink) 1146 1147# Final link of vmlinux with optional arch pass after final link 1148cmd_link-vmlinux = \ 1149 $(CONFIG_SHELL) $< "$(LD)" "$(KBUILD_LDFLAGS)" "$(LDFLAGS_vmlinux)"; \ 1150 $(if $(ARCH_POSTLINK), $(MAKE) -f $(ARCH_POSTLINK) $@, true) 1151 1152vmlinux: scripts/link-vmlinux.sh autoksyms_recursive $(vmlinux-deps) FORCE 1153 +$(call if_changed_dep,link-vmlinux) 1154 1155targets := vmlinux 1156 1157# The actual objects are generated when descending, 1158# make sure no implicit rule kicks in 1159$(sort $(vmlinux-deps)): . ; 1160 1161filechk_kernel.release = \ 1162 echo "$(KERNELVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))" 1163 1164# Store (new) KERNELRELEASE string in include/config/kernel.release 1165include/config/kernel.release: FORCE 1166 $(call filechk,kernel.release) 1167 1168# Additional helpers built in scripts/ 1169# Carefully list dependencies so we do not try to build scripts twice 1170# in parallel 1171PHONY += scripts 1172scripts: scripts_basic scripts_dtc 1173 $(Q)$(MAKE) $(build)=$(@) 1174 1175# Things we need to do before we recursively start building the kernel 1176# or the modules are listed in "prepare". 1177# A multi level approach is used. prepareN is processed before prepareN-1. 1178# archprepare is used in arch Makefiles and when processed asm symlink, 1179# version.h and scripts_basic is processed / created. 1180 1181PHONY += prepare archprepare 1182 1183archprepare: outputmakefile archheaders archscripts scripts include/config/kernel.release \ 1184 asm-generic $(version_h) $(autoksyms_h) include/generated/utsrelease.h \ 1185 include/generated/compile.h include/generated/autoconf.h remove-stale-files 1186 1187prepare0: archprepare 1188 $(Q)$(MAKE) $(build)=scripts/mod 1189 $(Q)$(MAKE) $(build)=. prepare 1190 1191# All the preparing.. 1192prepare: prepare0 1193 1194PHONY += remove-stale-files 1195remove-stale-files: 1196 $(Q)$(srctree)/scripts/remove-stale-files 1197 1198# Support for using generic headers in asm-generic 1199asm-generic := -f $(srctree)/scripts/Makefile.asm-generic obj 1200 1201PHONY += asm-generic uapi-asm-generic 1202asm-generic: uapi-asm-generic 1203 $(Q)$(MAKE) $(asm-generic)=arch/$(SRCARCH)/include/generated/asm \ 1204 generic=include/asm-generic 1205uapi-asm-generic: 1206 $(Q)$(MAKE) $(asm-generic)=arch/$(SRCARCH)/include/generated/uapi/asm \ 1207 generic=include/uapi/asm-generic 1208 1209# Generate some files 1210# --------------------------------------------------------------------------- 1211 1212# KERNELRELEASE can change from a few different places, meaning version.h 1213# needs to be updated, so this check is forced on all builds 1214 1215uts_len := 64 1216define filechk_utsrelease.h 1217 if [ `echo -n "$(KERNELRELEASE)" | wc -c ` -gt $(uts_len) ]; then \ 1218 echo '"$(KERNELRELEASE)" exceeds $(uts_len) characters' >&2; \ 1219 exit 1; \ 1220 fi; \ 1221 echo \#define UTS_RELEASE \"$(KERNELRELEASE)\" 1222endef 1223 1224define filechk_version.h 1225 if [ $(SUBLEVEL) -gt 255 ]; then \ 1226 echo \#define LINUX_VERSION_CODE $(shell \ 1227 expr $(VERSION) \* 65536 + $(PATCHLEVEL) \* 256 + 255); \ 1228 else \ 1229 echo \#define LINUX_VERSION_CODE $(shell \ 1230 expr $(VERSION) \* 65536 + $(PATCHLEVEL) \* 256 + $(SUBLEVEL)); \ 1231 fi; \ 1232 echo '#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + \ 1233 ((c) > 255 ? 255 : (c)))'; \ 1234 echo \#define LINUX_VERSION_MAJOR $(VERSION); \ 1235 echo \#define LINUX_VERSION_PATCHLEVEL $(PATCHLEVEL); \ 1236 echo \#define LINUX_VERSION_SUBLEVEL $(SUBLEVEL) 1237endef 1238 1239$(version_h): PATCHLEVEL := $(or $(PATCHLEVEL), 0) 1240$(version_h): SUBLEVEL := $(or $(SUBLEVEL), 0) 1241$(version_h): FORCE 1242 $(call filechk,version.h) 1243 1244include/generated/utsrelease.h: include/config/kernel.release FORCE 1245 $(call filechk,utsrelease.h) 1246 1247filechk_compile.h = $(srctree)/scripts/mkcompile_h \ 1248 "$(UTS_MACHINE)" "$(CONFIG_CC_VERSION_TEXT)" "$(LD)" 1249 1250include/generated/compile.h: FORCE 1251 $(call filechk,compile.h) 1252 1253PHONY += headerdep 1254headerdep: 1255 $(Q)find $(srctree)/include/ -name '*.h' | xargs --max-args 1 \ 1256 $(srctree)/scripts/headerdep.pl -I$(srctree)/include 1257 1258# --------------------------------------------------------------------------- 1259# Kernel headers 1260 1261#Default location for installed headers 1262export INSTALL_HDR_PATH = $(objtree)/usr 1263 1264quiet_cmd_headers_install = INSTALL $(INSTALL_HDR_PATH)/include 1265 cmd_headers_install = \ 1266 mkdir -p $(INSTALL_HDR_PATH); \ 1267 rsync -mrl --include='*/' --include='*\.h' --exclude='*' \ 1268 usr/include $(INSTALL_HDR_PATH) 1269 1270PHONY += headers_install 1271headers_install: headers 1272 $(call cmd,headers_install) 1273 1274PHONY += archheaders archscripts 1275 1276hdr-inst := -f $(srctree)/scripts/Makefile.headersinst obj 1277 1278PHONY += headers 1279headers: $(version_h) scripts_unifdef uapi-asm-generic archheaders archscripts 1280 $(if $(filter um, $(SRCARCH)), $(error Headers not exportable for UML)) 1281 $(Q)$(MAKE) $(hdr-inst)=include/uapi 1282 $(Q)$(MAKE) $(hdr-inst)=arch/$(SRCARCH)/include/uapi 1283 1284ifdef CONFIG_HEADERS_INSTALL 1285prepare: headers 1286endif 1287 1288PHONY += scripts_unifdef 1289scripts_unifdef: scripts_basic 1290 $(Q)$(MAKE) $(build)=scripts scripts/unifdef 1291 1292# --------------------------------------------------------------------------- 1293# Install 1294 1295# Many distributions have the custom install script, /sbin/installkernel. 1296# If DKMS is installed, 'make install' will eventually recurse back 1297# to this Makefile to build and install external modules. 1298# Cancel sub_make_done so that options such as M=, V=, etc. are parsed. 1299 1300quiet_cmd_install = INSTALL $(INSTALL_PATH) 1301 cmd_install = unset sub_make_done; $(srctree)/scripts/install.sh 1302 1303# --------------------------------------------------------------------------- 1304# Tools 1305 1306ifdef CONFIG_OBJTOOL 1307prepare: tools/objtool 1308endif 1309 1310ifdef CONFIG_BPF 1311ifdef CONFIG_DEBUG_INFO_BTF 1312prepare: tools/bpf/resolve_btfids 1313endif 1314endif 1315 1316PHONY += resolve_btfids_clean 1317 1318resolve_btfids_O = $(abspath $(objtree))/tools/bpf/resolve_btfids 1319 1320# tools/bpf/resolve_btfids directory might not exist 1321# in output directory, skip its clean in that case 1322resolve_btfids_clean: 1323ifneq ($(wildcard $(resolve_btfids_O)),) 1324 $(Q)$(MAKE) -sC $(srctree)/tools/bpf/resolve_btfids O=$(resolve_btfids_O) clean 1325endif 1326 1327# Clear a bunch of variables before executing the submake 1328ifeq ($(quiet),silent_) 1329tools_silent=s 1330endif 1331 1332tools/: FORCE 1333 $(Q)mkdir -p $(objtree)/tools 1334 $(Q)$(MAKE) LDFLAGS= MAKEFLAGS="$(tools_silent) $(filter --j% -j,$(MAKEFLAGS))" O=$(abspath $(objtree)) subdir=tools -C $(srctree)/tools/ 1335 1336tools/%: FORCE 1337 $(Q)mkdir -p $(objtree)/tools 1338 $(Q)$(MAKE) LDFLAGS= MAKEFLAGS="$(tools_silent) $(filter --j% -j,$(MAKEFLAGS))" O=$(abspath $(objtree)) subdir=tools -C $(srctree)/tools/ $* 1339 1340# --------------------------------------------------------------------------- 1341# Kernel selftest 1342 1343PHONY += kselftest 1344kselftest: headers 1345 $(Q)$(MAKE) -C $(srctree)/tools/testing/selftests run_tests 1346 1347kselftest-%: headers FORCE 1348 $(Q)$(MAKE) -C $(srctree)/tools/testing/selftests $* 1349 1350PHONY += kselftest-merge 1351kselftest-merge: 1352 $(if $(wildcard $(objtree)/.config),, $(error No .config exists, config your kernel first!)) 1353 $(Q)find $(srctree)/tools/testing/selftests -name config | \ 1354 xargs $(srctree)/scripts/kconfig/merge_config.sh -m $(objtree)/.config 1355 $(Q)$(MAKE) -f $(srctree)/Makefile olddefconfig 1356 1357# --------------------------------------------------------------------------- 1358# Devicetree files 1359 1360ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/boot/dts/),) 1361dtstree := arch/$(SRCARCH)/boot/dts 1362endif 1363 1364ifneq ($(dtstree),) 1365 1366%.dtb: dtbs_prepare 1367 $(Q)$(MAKE) $(build)=$(dtstree) $(dtstree)/$@ 1368 1369%.dtbo: dtbs_prepare 1370 $(Q)$(MAKE) $(build)=$(dtstree) $(dtstree)/$@ 1371 1372PHONY += dtbs dtbs_prepare dtbs_install dtbs_check 1373dtbs: dtbs_prepare 1374 $(Q)$(MAKE) $(build)=$(dtstree) 1375 1376# include/config/kernel.release is actually needed when installing DTBs because 1377# INSTALL_DTBS_PATH contains $(KERNELRELEASE). However, we do not want to make 1378# dtbs_install depend on it as dtbs_install may run as root. 1379dtbs_prepare: include/config/kernel.release scripts_dtc 1380 1381ifneq ($(filter dtbs_check, $(MAKECMDGOALS)),) 1382export CHECK_DTBS=y 1383dtbs: dt_binding_check 1384endif 1385 1386dtbs_check: dtbs 1387 1388dtbs_install: 1389 $(Q)$(MAKE) $(dtbinst)=$(dtstree) dst=$(INSTALL_DTBS_PATH) 1390 1391ifdef CONFIG_OF_EARLY_FLATTREE 1392all: dtbs 1393endif 1394 1395endif 1396 1397PHONY += scripts_dtc 1398scripts_dtc: scripts_basic 1399 $(Q)$(MAKE) $(build)=scripts/dtc 1400 1401ifneq ($(filter dt_binding_check, $(MAKECMDGOALS)),) 1402export CHECK_DT_BINDING=y 1403endif 1404 1405PHONY += dt_binding_check 1406dt_binding_check: scripts_dtc 1407 $(Q)$(MAKE) $(build)=Documentation/devicetree/bindings 1408 1409# --------------------------------------------------------------------------- 1410# Modules 1411 1412ifdef CONFIG_MODULES 1413 1414# By default, build modules as well 1415 1416all: modules 1417 1418# When we're building modules with modversions, we need to consider 1419# the built-in objects during the descend as well, in order to 1420# make sure the checksums are up to date before we record them. 1421ifdef CONFIG_MODVERSIONS 1422 KBUILD_BUILTIN := 1 1423endif 1424 1425# Build modules 1426# 1427 1428modules: $(if $(KBUILD_BUILTIN),vmlinux) modules_prepare 1429 1430# Target to prepare building external modules 1431modules_prepare: prepare 1432 $(Q)$(MAKE) $(build)=scripts scripts/module.lds 1433 1434export modules_sign_only := 1435 1436ifeq ($(CONFIG_MODULE_SIG),y) 1437PHONY += modules_sign 1438modules_sign: modules_install 1439 @: 1440 1441# modules_sign is a subset of modules_install. 1442# 'make modules_install modules_sign' is equivalent to 'make modules_install'. 1443ifeq ($(filter modules_install,$(MAKECMDGOALS)),) 1444modules_sign_only := y 1445endif 1446endif 1447 1448modinst_pre := 1449ifneq ($(filter modules_install,$(MAKECMDGOALS)),) 1450modinst_pre := __modinst_pre 1451endif 1452 1453modules_install: $(modinst_pre) 1454PHONY += __modinst_pre 1455__modinst_pre: 1456 @rm -rf $(MODLIB)/kernel 1457 @rm -f $(MODLIB)/source 1458 @mkdir -p $(MODLIB)/kernel 1459 @ln -s $(abspath $(srctree)) $(MODLIB)/source 1460 @if [ ! $(objtree) -ef $(MODLIB)/build ]; then \ 1461 rm -f $(MODLIB)/build ; \ 1462 ln -s $(CURDIR) $(MODLIB)/build ; \ 1463 fi 1464 @sed 's:^:kernel/:' modules.order > $(MODLIB)/modules.order 1465 @cp -f modules.builtin $(MODLIB)/ 1466 @cp -f $(objtree)/modules.builtin.modinfo $(MODLIB)/ 1467 1468endif # CONFIG_MODULES 1469 1470### 1471# Cleaning is done on three levels. 1472# make clean Delete most generated files 1473# Leave enough to build external modules 1474# make mrproper Delete the current configuration, and all generated files 1475# make distclean Remove editor backup files, patch leftover files and the like 1476 1477# Directories & files removed with 'make clean' 1478CLEAN_FILES += include/ksym vmlinux.symvers modules-only.symvers \ 1479 modules.builtin modules.builtin.modinfo modules.nsdeps \ 1480 compile_commands.json .thinlto-cache 1481 1482# Directories & files removed with 'make mrproper' 1483MRPROPER_FILES += include/config include/generated \ 1484 arch/$(SRCARCH)/include/generated .objdiff \ 1485 debian snap tar-install \ 1486 .config .config.old .version \ 1487 Module.symvers \ 1488 certs/signing_key.pem \ 1489 certs/x509.genkey \ 1490 vmlinux-gdb.py \ 1491 *.spec 1492 1493# clean - Delete most, but leave enough to build external modules 1494# 1495clean: rm-files := $(CLEAN_FILES) 1496 1497PHONY += archclean vmlinuxclean 1498 1499vmlinuxclean: 1500 $(Q)$(CONFIG_SHELL) $(srctree)/scripts/link-vmlinux.sh clean 1501 $(Q)$(if $(ARCH_POSTLINK), $(MAKE) -f $(ARCH_POSTLINK) clean) 1502 1503clean: archclean vmlinuxclean resolve_btfids_clean 1504 1505# mrproper - Delete all generated files, including .config 1506# 1507mrproper: rm-files := $(wildcard $(MRPROPER_FILES)) 1508mrproper-dirs := $(addprefix _mrproper_,scripts) 1509 1510PHONY += $(mrproper-dirs) mrproper 1511$(mrproper-dirs): 1512 $(Q)$(MAKE) $(clean)=$(patsubst _mrproper_%,%,$@) 1513 1514mrproper: clean $(mrproper-dirs) 1515 $(call cmd,rmfiles) 1516 1517# distclean 1518# 1519PHONY += distclean 1520 1521distclean: mrproper 1522 @find . $(RCS_FIND_IGNORE) \ 1523 \( -name '*.orig' -o -name '*.rej' -o -name '*~' \ 1524 -o -name '*.bak' -o -name '#*#' -o -name '*%' \ 1525 -o -name 'core' -o -name tags -o -name TAGS -o -name 'cscope*' \ 1526 -o -name GPATH -o -name GRTAGS -o -name GSYMS -o -name GTAGS \) \ 1527 -type f -print | xargs rm -f 1528 1529 1530# Packaging of the kernel to various formats 1531# --------------------------------------------------------------------------- 1532 1533%src-pkg: FORCE 1534 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.package $@ 1535%pkg: include/config/kernel.release FORCE 1536 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.package $@ 1537 1538# Brief documentation of the typical targets used 1539# --------------------------------------------------------------------------- 1540 1541boards := $(wildcard $(srctree)/arch/$(SRCARCH)/configs/*_defconfig) 1542boards := $(sort $(notdir $(boards))) 1543board-dirs := $(dir $(wildcard $(srctree)/arch/$(SRCARCH)/configs/*/*_defconfig)) 1544board-dirs := $(sort $(notdir $(board-dirs:/=))) 1545 1546PHONY += help 1547help: 1548 @echo 'Cleaning targets:' 1549 @echo ' clean - Remove most generated files but keep the config and' 1550 @echo ' enough build support to build external modules' 1551 @echo ' mrproper - Remove all generated files + config + various backup files' 1552 @echo ' distclean - mrproper + remove editor backup and patch files' 1553 @echo '' 1554 @echo 'Configuration targets:' 1555 @$(MAKE) -f $(srctree)/scripts/kconfig/Makefile help 1556 @echo '' 1557 @echo 'Other generic targets:' 1558 @echo ' all - Build all targets marked with [*]' 1559 @echo '* vmlinux - Build the bare kernel' 1560 @echo '* modules - Build all modules' 1561 @echo ' modules_install - Install all modules to INSTALL_MOD_PATH (default: /)' 1562 @echo ' dir/ - Build all files in dir and below' 1563 @echo ' dir/file.[ois] - Build specified target only' 1564 @echo ' dir/file.ll - Build the LLVM assembly file' 1565 @echo ' (requires compiler support for LLVM assembly generation)' 1566 @echo ' dir/file.lst - Build specified mixed source/assembly target only' 1567 @echo ' (requires a recent binutils and recent build (System.map))' 1568 @echo ' dir/file.ko - Build module including final link' 1569 @echo ' modules_prepare - Set up for building external modules' 1570 @echo ' tags/TAGS - Generate tags file for editors' 1571 @echo ' cscope - Generate cscope index' 1572 @echo ' gtags - Generate GNU GLOBAL index' 1573 @echo ' kernelrelease - Output the release version string (use with make -s)' 1574 @echo ' kernelversion - Output the version stored in Makefile (use with make -s)' 1575 @echo ' image_name - Output the image name (use with make -s)' 1576 @echo ' headers_install - Install sanitised kernel headers to INSTALL_HDR_PATH'; \ 1577 echo ' (default: $(INSTALL_HDR_PATH))'; \ 1578 echo '' 1579 @echo 'Static analysers:' 1580 @echo ' checkstack - Generate a list of stack hogs' 1581 @echo ' versioncheck - Sanity check on version.h usage' 1582 @echo ' includecheck - Check for duplicate included header files' 1583 @echo ' export_report - List the usages of all exported symbols' 1584 @echo ' headerdep - Detect inclusion cycles in headers' 1585 @echo ' coccicheck - Check with Coccinelle' 1586 @echo ' clang-analyzer - Check with clang static analyzer' 1587 @echo ' clang-tidy - Check with clang-tidy' 1588 @echo '' 1589 @echo 'Tools:' 1590 @echo ' nsdeps - Generate missing symbol namespace dependencies' 1591 @echo '' 1592 @echo 'Kernel selftest:' 1593 @echo ' kselftest - Build and run kernel selftest' 1594 @echo ' Build, install, and boot kernel before' 1595 @echo ' running kselftest on it' 1596 @echo ' Run as root for full coverage' 1597 @echo ' kselftest-all - Build kernel selftest' 1598 @echo ' kselftest-install - Build and install kernel selftest' 1599 @echo ' kselftest-clean - Remove all generated kselftest files' 1600 @echo ' kselftest-merge - Merge all the config dependencies of' 1601 @echo ' kselftest to existing .config.' 1602 @echo '' 1603 @$(if $(dtstree), \ 1604 echo 'Devicetree:'; \ 1605 echo '* dtbs - Build device tree blobs for enabled boards'; \ 1606 echo ' dtbs_install - Install dtbs to $(INSTALL_DTBS_PATH)'; \ 1607 echo ' dt_binding_check - Validate device tree binding documents'; \ 1608 echo ' dtbs_check - Validate device tree source files';\ 1609 echo '') 1610 1611 @echo 'Userspace tools targets:' 1612 @echo ' use "make tools/help"' 1613 @echo ' or "cd tools; make help"' 1614 @echo '' 1615 @echo 'Kernel packaging:' 1616 @$(MAKE) -f $(srctree)/scripts/Makefile.package help 1617 @echo '' 1618 @echo 'Documentation targets:' 1619 @$(MAKE) -f $(srctree)/Documentation/Makefile dochelp 1620 @echo '' 1621 @echo 'Architecture specific targets ($(SRCARCH)):' 1622 @$(or $(archhelp),\ 1623 echo ' No architecture specific help defined for $(SRCARCH)') 1624 @echo '' 1625 @$(if $(boards), \ 1626 $(foreach b, $(boards), \ 1627 printf " %-27s - Build for %s\\n" $(b) $(subst _defconfig,,$(b));) \ 1628 echo '') 1629 @$(if $(board-dirs), \ 1630 $(foreach b, $(board-dirs), \ 1631 printf " %-16s - Show %s-specific targets\\n" help-$(b) $(b);) \ 1632 printf " %-16s - Show all of the above\\n" help-boards; \ 1633 echo '') 1634 1635 @echo ' make V=0|1 [targets] 0 => quiet build (default), 1 => verbose build' 1636 @echo ' make V=2 [targets] 2 => give reason for rebuild of target' 1637 @echo ' make O=dir [targets] Locate all output files in "dir", including .config' 1638 @echo ' make C=1 [targets] Check re-compiled c source with $$CHECK' 1639 @echo ' (sparse by default)' 1640 @echo ' make C=2 [targets] Force check of all c source with $$CHECK' 1641 @echo ' make RECORDMCOUNT_WARN=1 [targets] Warn about ignored mcount sections' 1642 @echo ' make W=n [targets] Enable extra build checks, n=1,2,3 where' 1643 @echo ' 1: warnings which may be relevant and do not occur too often' 1644 @echo ' 2: warnings which occur quite often but may still be relevant' 1645 @echo ' 3: more obscure warnings, can most likely be ignored' 1646 @echo ' e: warnings are being treated as errors' 1647 @echo ' Multiple levels can be combined with W=12 or W=123' 1648 @echo '' 1649 @echo 'Execute "make" or "make all" to build all targets marked with [*] ' 1650 @echo 'For further info see the ./README file' 1651 1652 1653help-board-dirs := $(addprefix help-,$(board-dirs)) 1654 1655help-boards: $(help-board-dirs) 1656 1657boards-per-dir = $(sort $(notdir $(wildcard $(srctree)/arch/$(SRCARCH)/configs/$*/*_defconfig))) 1658 1659$(help-board-dirs): help-%: 1660 @echo 'Architecture specific targets ($(SRCARCH) $*):' 1661 @$(if $(boards-per-dir), \ 1662 $(foreach b, $(boards-per-dir), \ 1663 printf " %-24s - Build for %s\\n" $*/$(b) $(subst _defconfig,,$(b));) \ 1664 echo '') 1665 1666 1667# Documentation targets 1668# --------------------------------------------------------------------------- 1669DOC_TARGETS := xmldocs latexdocs pdfdocs htmldocs epubdocs cleandocs \ 1670 linkcheckdocs dochelp refcheckdocs 1671PHONY += $(DOC_TARGETS) 1672$(DOC_TARGETS): 1673 $(Q)$(MAKE) $(build)=Documentation $@ 1674 1675# Misc 1676# --------------------------------------------------------------------------- 1677 1678PHONY += scripts_gdb 1679scripts_gdb: prepare0 1680 $(Q)$(MAKE) $(build)=scripts/gdb 1681 $(Q)ln -fsn $(abspath $(srctree)/scripts/gdb/vmlinux-gdb.py) 1682 1683ifdef CONFIG_GDB_SCRIPTS 1684all: scripts_gdb 1685endif 1686 1687else # KBUILD_EXTMOD 1688 1689### 1690# External module support. 1691# When building external modules the kernel used as basis is considered 1692# read-only, and no consistency checks are made and the make 1693# system is not used on the basis kernel. If updates are required 1694# in the basis kernel ordinary make commands (without M=...) must be used. 1695 1696# We are always building only modules. 1697KBUILD_BUILTIN := 1698KBUILD_MODULES := 1 1699 1700build-dir := $(KBUILD_EXTMOD) 1701 1702compile_commands.json: $(extmod_prefix)compile_commands.json 1703PHONY += compile_commands.json 1704 1705clean-dirs := $(KBUILD_EXTMOD) 1706clean: rm-files := $(KBUILD_EXTMOD)/Module.symvers $(KBUILD_EXTMOD)/modules.nsdeps \ 1707 $(KBUILD_EXTMOD)/compile_commands.json $(KBUILD_EXTMOD)/.thinlto-cache 1708 1709PHONY += prepare 1710# now expand this into a simple variable to reduce the cost of shell evaluations 1711prepare: CC_VERSION_TEXT := $(CC_VERSION_TEXT) 1712prepare: 1713 @if [ "$(CC_VERSION_TEXT)" != "$(CONFIG_CC_VERSION_TEXT)" ]; then \ 1714 echo >&2 "warning: the compiler differs from the one used to build the kernel"; \ 1715 echo >&2 " The kernel was built by: $(CONFIG_CC_VERSION_TEXT)"; \ 1716 echo >&2 " You are using: $(CC_VERSION_TEXT)"; \ 1717 fi 1718 1719PHONY += help 1720help: 1721 @echo ' Building external modules.' 1722 @echo ' Syntax: make -C path/to/kernel/src M=$$PWD target' 1723 @echo '' 1724 @echo ' modules - default target, build the module(s)' 1725 @echo ' modules_install - install the module' 1726 @echo ' clean - remove generated files in module directory only' 1727 @echo '' 1728 1729endif # KBUILD_EXTMOD 1730 1731# --------------------------------------------------------------------------- 1732# Modules 1733 1734PHONY += modules modules_install modules_prepare 1735 1736ifdef CONFIG_MODULES 1737 1738$(MODORDER): $(build-dir) 1739 @: 1740 1741modules: modules_check 1742 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost 1743 1744PHONY += modules_check 1745modules_check: $(MODORDER) 1746 $(Q)$(CONFIG_SHELL) $(srctree)/scripts/modules-check.sh $< 1747 1748quiet_cmd_depmod = DEPMOD $(MODLIB) 1749 cmd_depmod = $(CONFIG_SHELL) $(srctree)/scripts/depmod.sh $(DEPMOD) \ 1750 $(KERNELRELEASE) 1751 1752modules_install: 1753 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modinst 1754 $(call cmd,depmod) 1755 1756else # CONFIG_MODULES 1757 1758# Modules not configured 1759# --------------------------------------------------------------------------- 1760 1761modules modules_install: 1762 @echo >&2 '***' 1763 @echo >&2 '*** The present kernel configuration has modules disabled.' 1764 @echo >&2 '*** To use the module feature, please run "make menuconfig" etc.' 1765 @echo >&2 '*** to enable CONFIG_MODULES.' 1766 @echo >&2 '***' 1767 @exit 1 1768 1769KBUILD_MODULES := 1770 1771endif # CONFIG_MODULES 1772 1773# Single targets 1774# --------------------------------------------------------------------------- 1775# To build individual files in subdirectories, you can do like this: 1776# 1777# make foo/bar/baz.s 1778# 1779# The supported suffixes for single-target are listed in 'single-targets' 1780# 1781# To build only under specific subdirectories, you can do like this: 1782# 1783# make foo/bar/baz/ 1784 1785ifdef single-build 1786 1787# .ko is special because modpost is needed 1788single-ko := $(sort $(filter %.ko, $(MAKECMDGOALS))) 1789single-no-ko := $(filter-out $(single-ko), $(MAKECMDGOALS)) \ 1790 $(foreach x, o mod, $(patsubst %.ko, %.$x, $(single-ko))) 1791 1792$(single-ko): single_modpost 1793 @: 1794$(single-no-ko): $(build-dir) 1795 @: 1796 1797# Remove MODORDER when done because it is not the real one. 1798PHONY += single_modpost 1799single_modpost: $(single-no-ko) modules_prepare 1800 $(Q){ $(foreach m, $(single-ko), echo $(extmod_prefix)$m;) } > $(MODORDER) 1801 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost 1802 $(Q)rm -f $(MODORDER) 1803 1804single-goals := $(addprefix $(build-dir)/, $(single-no-ko)) 1805 1806endif 1807 1808# Preset locale variables to speed up the build process. Limit locale 1809# tweaks to this spot to avoid wrong language settings when running 1810# make menuconfig etc. 1811# Error messages still appears in the original language 1812PHONY += $(build-dir) 1813$(build-dir): prepare 1814 $(Q)$(MAKE) $(build)=$@ need-builtin=1 need-modorder=1 $(single-goals) 1815 1816clean-dirs := $(addprefix _clean_, $(clean-dirs)) 1817PHONY += $(clean-dirs) clean 1818$(clean-dirs): 1819 $(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@) 1820 1821clean: $(clean-dirs) 1822 $(call cmd,rmfiles) 1823 @find $(or $(KBUILD_EXTMOD), .) $(RCS_FIND_IGNORE) \ 1824 \( -name '*.[aios]' -o -name '*.ko' -o -name '.*.cmd' \ 1825 -o -name '*.ko.*' \ 1826 -o -name '*.dtb' -o -name '*.dtbo' -o -name '*.dtb.S' -o -name '*.dt.yaml' \ 1827 -o -name '*.dwo' -o -name '*.lst' \ 1828 -o -name '*.su' -o -name '*.mod' -o -name '*.usyms' \ 1829 -o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \ 1830 -o -name '*.lex.c' -o -name '*.tab.[ch]' \ 1831 -o -name '*.asn1.[ch]' \ 1832 -o -name '*.symtypes' -o -name 'modules.order' \ 1833 -o -name '.tmp_*' \ 1834 -o -name '*.c.[012]*.*' \ 1835 -o -name '*.ll' \ 1836 -o -name '*.gcno' \ 1837 -o -name '*.*.symversions' \) -type f -print | xargs rm -f 1838 1839# Generate tags for editors 1840# --------------------------------------------------------------------------- 1841quiet_cmd_tags = GEN $@ 1842 cmd_tags = $(BASH) $(srctree)/scripts/tags.sh $@ 1843 1844tags TAGS cscope gtags: FORCE 1845 $(call cmd,tags) 1846 1847# Script to generate missing namespace dependencies 1848# --------------------------------------------------------------------------- 1849 1850PHONY += nsdeps 1851nsdeps: export KBUILD_NSDEPS=1 1852nsdeps: modules 1853 $(Q)$(CONFIG_SHELL) $(srctree)/scripts/nsdeps 1854 1855# Clang Tooling 1856# --------------------------------------------------------------------------- 1857 1858quiet_cmd_gen_compile_commands = GEN $@ 1859 cmd_gen_compile_commands = $(PYTHON3) $< -a $(AR) -o $@ $(filter-out $<, $(real-prereqs)) 1860 1861$(extmod_prefix)compile_commands.json: scripts/clang-tools/gen_compile_commands.py \ 1862 $(if $(KBUILD_EXTMOD),,$(KBUILD_VMLINUX_OBJS) $(KBUILD_VMLINUX_LIBS)) \ 1863 $(if $(CONFIG_MODULES), $(MODORDER)) FORCE 1864 $(call if_changed,gen_compile_commands) 1865 1866targets += $(extmod_prefix)compile_commands.json 1867 1868PHONY += clang-tidy clang-analyzer 1869 1870ifdef CONFIG_CC_IS_CLANG 1871quiet_cmd_clang_tools = CHECK $< 1872 cmd_clang_tools = $(PYTHON3) $(srctree)/scripts/clang-tools/run-clang-tools.py $@ $< 1873 1874clang-tidy clang-analyzer: $(extmod_prefix)compile_commands.json 1875 $(call cmd,clang_tools) 1876else 1877clang-tidy clang-analyzer: 1878 @echo "$@ requires CC=clang" >&2 1879 @false 1880endif 1881 1882# Scripts to check various things for consistency 1883# --------------------------------------------------------------------------- 1884 1885PHONY += includecheck versioncheck coccicheck export_report 1886 1887includecheck: 1888 find $(srctree)/* $(RCS_FIND_IGNORE) \ 1889 -name '*.[hcS]' -type f -print | sort \ 1890 | xargs $(PERL) -w $(srctree)/scripts/checkincludes.pl 1891 1892versioncheck: 1893 find $(srctree)/* $(RCS_FIND_IGNORE) \ 1894 -name '*.[hcS]' -type f -print | sort \ 1895 | xargs $(PERL) -w $(srctree)/scripts/checkversion.pl 1896 1897coccicheck: 1898 $(Q)$(BASH) $(srctree)/scripts/$@ 1899 1900export_report: 1901 $(PERL) $(srctree)/scripts/export_report.pl 1902 1903PHONY += checkstack kernelrelease kernelversion image_name 1904 1905# UML needs a little special treatment here. It wants to use the host 1906# toolchain, so needs $(SUBARCH) passed to checkstack.pl. Everyone 1907# else wants $(ARCH), including people doing cross-builds, which means 1908# that $(SUBARCH) doesn't work here. 1909ifeq ($(ARCH), um) 1910CHECKSTACK_ARCH := $(SUBARCH) 1911else 1912CHECKSTACK_ARCH := $(ARCH) 1913endif 1914checkstack: 1915 $(OBJDUMP) -d vmlinux $$(find . -name '*.ko') | \ 1916 $(PERL) $(srctree)/scripts/checkstack.pl $(CHECKSTACK_ARCH) 1917 1918kernelrelease: 1919 @echo "$(KERNELVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))" 1920 1921kernelversion: 1922 @echo $(KERNELVERSION) 1923 1924image_name: 1925 @echo $(KBUILD_IMAGE) 1926 1927quiet_cmd_rmfiles = $(if $(wildcard $(rm-files)),CLEAN $(wildcard $(rm-files))) 1928 cmd_rmfiles = rm -rf $(rm-files) 1929 1930# read saved command lines for existing targets 1931existing-targets := $(wildcard $(sort $(targets))) 1932 1933-include $(foreach f,$(existing-targets),$(dir $(f)).$(notdir $(f)).cmd) 1934 1935endif # config-build 1936endif # mixed-build 1937endif # need-sub-make 1938 1939PHONY += FORCE 1940FORCE: 1941 1942# Declare the contents of the PHONY variable as phony. We keep that 1943# information in a variable so we can use it in if_changed and friends. 1944.PHONY: $(PHONY) 1945