1# SPDX-License-Identifier: GPL-2.0 2VERSION = 6 3PATCHLEVEL = 8 4SUBLEVEL = 0 5EXTRAVERSION = -rc5 6NAME = Hurr durr I'ma ninja sloth 7 8# *DOCUMENTATION* 9# To see a list of typical targets execute "make help" 10# More info can be located in ./README 11# Comments in this file are targeted only to the developer, do not 12# expect to learn how to build the kernel reading this file. 13 14ifeq ($(filter undefine,$(.FEATURES)),) 15$(error GNU Make >= 3.82 is required. Your Make version is $(MAKE_VERSION)) 16endif 17 18$(if $(filter __%, $(MAKECMDGOALS)), \ 19 $(error targets prefixed with '__' are only for internal use)) 20 21# That's our default target when none is given on the command line 22PHONY := __all 23__all: 24 25# We are using a recursive build, so we need to do a little thinking 26# to get the ordering right. 27# 28# Most importantly: sub-Makefiles should only ever modify files in 29# their own directory. If in some directory we have a dependency on 30# a file in another dir (which doesn't happen often, but it's often 31# unavoidable when linking the built-in.a targets which finally 32# turn into vmlinux), we will call a sub make in that other dir, and 33# after that we are sure that everything which is in that other dir 34# is now up to date. 35# 36# The only cases where we need to modify files which have global 37# effects are thus separated out and done before the recursive 38# descending is started. They are now explicitly listed as the 39# prepare rule. 40 41this-makefile := $(lastword $(MAKEFILE_LIST)) 42export abs_srctree := $(realpath $(dir $(this-makefile))) 43export abs_objtree := $(CURDIR) 44 45ifneq ($(sub_make_done),1) 46 47# Do not use make's built-in rules and variables 48# (this increases performance and avoids hard-to-debug behaviour) 49MAKEFLAGS += -rR 50 51# Avoid funny character set dependencies 52unexport LC_ALL 53LC_COLLATE=C 54LC_NUMERIC=C 55export LC_COLLATE LC_NUMERIC 56 57# Avoid interference with shell env settings 58unexport GREP_OPTIONS 59 60# Beautify output 61# --------------------------------------------------------------------------- 62# 63# Most of build commands in Kbuild start with "cmd_". You can optionally define 64# "quiet_cmd_*". If defined, the short log is printed. Otherwise, no log from 65# that command is printed by default. 66# 67# e.g.) 68# quiet_cmd_depmod = DEPMOD $(MODLIB) 69# cmd_depmod = $(srctree)/scripts/depmod.sh $(DEPMOD) $(KERNELRELEASE) 70# 71# A simple variant is to prefix commands with $(Q) - that's useful 72# for commands that shall be hidden in non-verbose mode. 73# 74# $(Q)$(MAKE) $(build)=scripts/basic 75# 76# If KBUILD_VERBOSE contains 1, the whole command is echoed. 77# If KBUILD_VERBOSE contains 2, the reason for rebuilding is printed. 78# 79# To put more focus on warnings, be less verbose as default 80# Use 'make V=1' to see the full commands 81 82ifeq ("$(origin V)", "command line") 83 KBUILD_VERBOSE = $(V) 84endif 85 86quiet = quiet_ 87Q = @ 88 89ifneq ($(findstring 1, $(KBUILD_VERBOSE)),) 90 quiet = 91 Q = 92endif 93 94# If the user is running make -s (silent mode), suppress echoing of 95# commands 96# make-4.0 (and later) keep single letter options in the 1st word of MAKEFLAGS. 97 98ifeq ($(filter 3.%,$(MAKE_VERSION)),) 99short-opts := $(firstword -$(MAKEFLAGS)) 100else 101short-opts := $(filter-out --%,$(MAKEFLAGS)) 102endif 103 104ifneq ($(findstring s,$(short-opts)),) 105quiet=silent_ 106override KBUILD_VERBOSE := 107endif 108 109export quiet Q KBUILD_VERBOSE 110 111# Call a source code checker (by default, "sparse") as part of the 112# C compilation. 113# 114# Use 'make C=1' to enable checking of only re-compiled files. 115# Use 'make C=2' to enable checking of *all* source files, regardless 116# of whether they are re-compiled or not. 117# 118# See the file "Documentation/dev-tools/sparse.rst" for more details, 119# including where to get the "sparse" utility. 120 121ifeq ("$(origin C)", "command line") 122 KBUILD_CHECKSRC = $(C) 123endif 124ifndef KBUILD_CHECKSRC 125 KBUILD_CHECKSRC = 0 126endif 127 128export KBUILD_CHECKSRC 129 130# Enable "clippy" (a linter) as part of the Rust compilation. 131# 132# Use 'make CLIPPY=1' to enable it. 133ifeq ("$(origin CLIPPY)", "command line") 134 KBUILD_CLIPPY := $(CLIPPY) 135endif 136 137export KBUILD_CLIPPY 138 139# Use make M=dir or set the environment variable KBUILD_EXTMOD to specify the 140# directory of external module to build. Setting M= takes precedence. 141ifeq ("$(origin M)", "command line") 142 KBUILD_EXTMOD := $(M) 143endif 144 145$(if $(word 2, $(KBUILD_EXTMOD)), \ 146 $(error building multiple external modules is not supported)) 147 148$(foreach x, % :, $(if $(findstring $x, $(KBUILD_EXTMOD)), \ 149 $(error module directory path cannot contain '$x'))) 150 151# Remove trailing slashes 152ifneq ($(filter %/, $(KBUILD_EXTMOD)),) 153KBUILD_EXTMOD := $(shell dirname $(KBUILD_EXTMOD).) 154endif 155 156export KBUILD_EXTMOD 157 158# backward compatibility 159KBUILD_EXTRA_WARN ?= $(KBUILD_ENABLE_EXTRA_GCC_CHECKS) 160 161ifeq ("$(origin W)", "command line") 162 KBUILD_EXTRA_WARN := $(W) 163endif 164 165export KBUILD_EXTRA_WARN 166 167# Kbuild will save output files in the current working directory. 168# This does not need to match to the root of the kernel source tree. 169# 170# For example, you can do this: 171# 172# cd /dir/to/store/output/files; make -f /dir/to/kernel/source/Makefile 173# 174# If you want to save output files in a different location, there are 175# two syntaxes to specify it. 176# 177# 1) O= 178# Use "make O=dir/to/store/output/files/" 179# 180# 2) Set KBUILD_OUTPUT 181# Set the environment variable KBUILD_OUTPUT to point to the output directory. 182# export KBUILD_OUTPUT=dir/to/store/output/files/; make 183# 184# The O= assignment takes precedence over the KBUILD_OUTPUT environment 185# variable. 186 187# Do we want to change the working directory? 188ifeq ("$(origin O)", "command line") 189 KBUILD_OUTPUT := $(O) 190endif 191 192ifneq ($(KBUILD_OUTPUT),) 193# $(realpath ...) gets empty if the path does not exist. Run 'mkdir -p' first. 194$(shell mkdir -p "$(KBUILD_OUTPUT)") 195# $(realpath ...) resolves symlinks 196abs_objtree := $(realpath $(KBUILD_OUTPUT)) 197$(if $(abs_objtree),,$(error failed to create output directory "$(KBUILD_OUTPUT)")) 198endif # ifneq ($(KBUILD_OUTPUT),) 199 200ifneq ($(words $(subst :, ,$(abs_srctree))), 1) 201$(error source directory cannot contain spaces or colons) 202endif 203 204ifneq ($(filter 3.%,$(MAKE_VERSION)),) 205# 'MAKEFLAGS += -rR' does not immediately become effective for GNU Make 3.x 206# We need to invoke sub-make to avoid implicit rules in the top Makefile. 207need-sub-make := 1 208# Cancel implicit rules for this Makefile. 209$(this-makefile): ; 210endif 211 212export sub_make_done := 1 213 214endif # sub_make_done 215 216ifeq ($(abs_objtree),$(CURDIR)) 217# Suppress "Entering directory ..." if we are at the final work directory. 218no-print-directory := --no-print-directory 219else 220# Recursion to show "Entering directory ..." 221need-sub-make := 1 222endif 223 224ifeq ($(filter --no-print-directory, $(MAKEFLAGS)),) 225# If --no-print-directory is unset, recurse once again to set it. 226# You may end up recursing into __sub-make twice. This is needed due to the 227# behavior change in GNU Make 4.4.1. 228need-sub-make := 1 229endif 230 231ifeq ($(need-sub-make),1) 232 233PHONY += $(MAKECMDGOALS) __sub-make 234 235$(filter-out $(this-makefile), $(MAKECMDGOALS)) __all: __sub-make 236 @: 237 238# Invoke a second make in the output directory, passing relevant variables 239__sub-make: 240 $(Q)$(MAKE) $(no-print-directory) -C $(abs_objtree) \ 241 -f $(abs_srctree)/Makefile $(MAKECMDGOALS) 242 243else # need-sub-make 244 245# We process the rest of the Makefile if this is the final invocation of make 246 247ifeq ($(abs_srctree),$(abs_objtree)) 248 # building in the source tree 249 srctree := . 250 building_out_of_srctree := 251else 252 ifeq ($(abs_srctree)/,$(dir $(abs_objtree))) 253 # building in a subdirectory of the source tree 254 srctree := .. 255 else 256 srctree := $(abs_srctree) 257 endif 258 building_out_of_srctree := 1 259endif 260 261ifneq ($(KBUILD_ABS_SRCTREE),) 262srctree := $(abs_srctree) 263endif 264 265objtree := . 266VPATH := $(srctree) 267 268export building_out_of_srctree srctree objtree VPATH 269 270# To make sure we do not include .config for any of the *config targets 271# catch them early, and hand them over to scripts/kconfig/Makefile 272# It is allowed to specify more targets when calling make, including 273# mixing *config targets and build targets. 274# For example 'make oldconfig all'. 275# Detect when mixed targets is specified, and make a second invocation 276# of make so .config is not included in this case either (for *config). 277 278version_h := include/generated/uapi/linux/version.h 279 280clean-targets := %clean mrproper cleandocs 281no-dot-config-targets := $(clean-targets) \ 282 cscope gtags TAGS tags help% %docs check% coccicheck \ 283 $(version_h) headers headers_% archheaders archscripts \ 284 %asm-generic kernelversion %src-pkg dt_binding_check \ 285 outputmakefile rustavailable rustfmt rustfmtcheck 286no-sync-config-targets := $(no-dot-config-targets) %install modules_sign kernelrelease \ 287 image_name 288single-targets := %.a %.i %.ko %.lds %.ll %.lst %.mod %.o %.rsi %.s %.symtypes %/ 289 290config-build := 291mixed-build := 292need-config := 1 293may-sync-config := 1 294single-build := 295 296ifneq ($(filter $(no-dot-config-targets), $(MAKECMDGOALS)),) 297 ifeq ($(filter-out $(no-dot-config-targets), $(MAKECMDGOALS)),) 298 need-config := 299 endif 300endif 301 302ifneq ($(filter $(no-sync-config-targets), $(MAKECMDGOALS)),) 303 ifeq ($(filter-out $(no-sync-config-targets), $(MAKECMDGOALS)),) 304 may-sync-config := 305 endif 306endif 307 308need-compiler := $(may-sync-config) 309 310ifneq ($(KBUILD_EXTMOD),) 311 may-sync-config := 312endif 313 314ifeq ($(KBUILD_EXTMOD),) 315 ifneq ($(filter %config,$(MAKECMDGOALS)),) 316 config-build := 1 317 ifneq ($(words $(MAKECMDGOALS)),1) 318 mixed-build := 1 319 endif 320 endif 321endif 322 323# We cannot build single targets and the others at the same time 324ifneq ($(filter $(single-targets), $(MAKECMDGOALS)),) 325 single-build := 1 326 ifneq ($(filter-out $(single-targets), $(MAKECMDGOALS)),) 327 mixed-build := 1 328 endif 329endif 330 331# For "make -j clean all", "make -j mrproper defconfig all", etc. 332ifneq ($(filter $(clean-targets),$(MAKECMDGOALS)),) 333 ifneq ($(filter-out $(clean-targets),$(MAKECMDGOALS)),) 334 mixed-build := 1 335 endif 336endif 337 338# install and modules_install need also be processed one by one 339ifneq ($(filter install,$(MAKECMDGOALS)),) 340 ifneq ($(filter modules_install,$(MAKECMDGOALS)),) 341 mixed-build := 1 342 endif 343endif 344 345ifdef mixed-build 346# =========================================================================== 347# We're called with mixed targets (*config and build targets). 348# Handle them one by one. 349 350PHONY += $(MAKECMDGOALS) __build_one_by_one 351 352$(MAKECMDGOALS): __build_one_by_one 353 @: 354 355__build_one_by_one: 356 $(Q)set -e; \ 357 for i in $(MAKECMDGOALS); do \ 358 $(MAKE) -f $(srctree)/Makefile $$i; \ 359 done 360 361else # !mixed-build 362 363include $(srctree)/scripts/Kbuild.include 364 365# Read KERNELRELEASE from include/config/kernel.release (if it exists) 366KERNELRELEASE = $(call read-file, include/config/kernel.release) 367KERNELVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION) 368export VERSION PATCHLEVEL SUBLEVEL KERNELRELEASE KERNELVERSION 369 370include $(srctree)/scripts/subarch.include 371 372# Cross compiling and selecting different set of gcc/bin-utils 373# --------------------------------------------------------------------------- 374# 375# When performing cross compilation for other architectures ARCH shall be set 376# to the target architecture. (See arch/* for the possibilities). 377# ARCH can be set during invocation of make: 378# make ARCH=arm64 379# Another way is to have ARCH set in the environment. 380# The default ARCH is the host where make is executed. 381 382# CROSS_COMPILE specify the prefix used for all executables used 383# during compilation. Only gcc and related bin-utils executables 384# are prefixed with $(CROSS_COMPILE). 385# CROSS_COMPILE can be set on the command line 386# make CROSS_COMPILE=aarch64-linux-gnu- 387# Alternatively CROSS_COMPILE can be set in the environment. 388# Default value for CROSS_COMPILE is not to prefix executables 389# Note: Some architectures assign CROSS_COMPILE in their arch/*/Makefile 390ARCH ?= $(SUBARCH) 391 392# Architecture as present in compile.h 393UTS_MACHINE := $(ARCH) 394SRCARCH := $(ARCH) 395 396# Additional ARCH settings for x86 397ifeq ($(ARCH),i386) 398 SRCARCH := x86 399endif 400ifeq ($(ARCH),x86_64) 401 SRCARCH := x86 402endif 403 404# Additional ARCH settings for sparc 405ifeq ($(ARCH),sparc32) 406 SRCARCH := sparc 407endif 408ifeq ($(ARCH),sparc64) 409 SRCARCH := sparc 410endif 411 412# Additional ARCH settings for parisc 413ifeq ($(ARCH),parisc64) 414 SRCARCH := parisc 415endif 416 417export cross_compiling := 418ifneq ($(SRCARCH),$(SUBARCH)) 419cross_compiling := 1 420endif 421 422KCONFIG_CONFIG ?= .config 423export KCONFIG_CONFIG 424 425# SHELL used by kbuild 426CONFIG_SHELL := sh 427 428HOST_LFS_CFLAGS := $(shell getconf LFS_CFLAGS 2>/dev/null) 429HOST_LFS_LDFLAGS := $(shell getconf LFS_LDFLAGS 2>/dev/null) 430HOST_LFS_LIBS := $(shell getconf LFS_LIBS 2>/dev/null) 431 432ifneq ($(LLVM),) 433ifneq ($(filter %/,$(LLVM)),) 434LLVM_PREFIX := $(LLVM) 435else ifneq ($(filter -%,$(LLVM)),) 436LLVM_SUFFIX := $(LLVM) 437endif 438 439HOSTCC = $(LLVM_PREFIX)clang$(LLVM_SUFFIX) 440HOSTCXX = $(LLVM_PREFIX)clang++$(LLVM_SUFFIX) 441else 442HOSTCC = gcc 443HOSTCXX = g++ 444endif 445HOSTRUSTC = rustc 446HOSTPKG_CONFIG = pkg-config 447 448KBUILD_USERHOSTCFLAGS := -Wall -Wmissing-prototypes -Wstrict-prototypes \ 449 -O2 -fomit-frame-pointer -std=gnu11 450KBUILD_USERCFLAGS := $(KBUILD_USERHOSTCFLAGS) $(USERCFLAGS) 451KBUILD_USERLDFLAGS := $(USERLDFLAGS) 452 453# These flags apply to all Rust code in the tree, including the kernel and 454# host programs. 455export rust_common_flags := --edition=2021 \ 456 -Zbinary_dep_depinfo=y \ 457 -Dunsafe_op_in_unsafe_fn -Drust_2018_idioms \ 458 -Dunreachable_pub -Dnon_ascii_idents \ 459 -Wmissing_docs \ 460 -Drustdoc::missing_crate_level_docs \ 461 -Dclippy::correctness -Dclippy::style \ 462 -Dclippy::suspicious -Dclippy::complexity \ 463 -Dclippy::perf \ 464 -Dclippy::let_unit_value -Dclippy::mut_mut \ 465 -Dclippy::needless_bitwise_bool \ 466 -Dclippy::needless_continue \ 467 -Dclippy::no_mangle_with_rust_abi \ 468 -Wclippy::dbg_macro 469 470KBUILD_HOSTCFLAGS := $(KBUILD_USERHOSTCFLAGS) $(HOST_LFS_CFLAGS) $(HOSTCFLAGS) 471KBUILD_HOSTCXXFLAGS := -Wall -O2 $(HOST_LFS_CFLAGS) $(HOSTCXXFLAGS) 472KBUILD_HOSTRUSTFLAGS := $(rust_common_flags) -O -Cstrip=debuginfo \ 473 -Zallow-features= $(HOSTRUSTFLAGS) 474KBUILD_HOSTLDFLAGS := $(HOST_LFS_LDFLAGS) $(HOSTLDFLAGS) 475KBUILD_HOSTLDLIBS := $(HOST_LFS_LIBS) $(HOSTLDLIBS) 476 477# Make variables (CC, etc...) 478CPP = $(CC) -E 479ifneq ($(LLVM),) 480CC = $(LLVM_PREFIX)clang$(LLVM_SUFFIX) 481LD = $(LLVM_PREFIX)ld.lld$(LLVM_SUFFIX) 482AR = $(LLVM_PREFIX)llvm-ar$(LLVM_SUFFIX) 483NM = $(LLVM_PREFIX)llvm-nm$(LLVM_SUFFIX) 484OBJCOPY = $(LLVM_PREFIX)llvm-objcopy$(LLVM_SUFFIX) 485OBJDUMP = $(LLVM_PREFIX)llvm-objdump$(LLVM_SUFFIX) 486READELF = $(LLVM_PREFIX)llvm-readelf$(LLVM_SUFFIX) 487STRIP = $(LLVM_PREFIX)llvm-strip$(LLVM_SUFFIX) 488else 489CC = $(CROSS_COMPILE)gcc 490LD = $(CROSS_COMPILE)ld 491AR = $(CROSS_COMPILE)ar 492NM = $(CROSS_COMPILE)nm 493OBJCOPY = $(CROSS_COMPILE)objcopy 494OBJDUMP = $(CROSS_COMPILE)objdump 495READELF = $(CROSS_COMPILE)readelf 496STRIP = $(CROSS_COMPILE)strip 497endif 498RUSTC = rustc 499RUSTDOC = rustdoc 500RUSTFMT = rustfmt 501CLIPPY_DRIVER = clippy-driver 502BINDGEN = bindgen 503CARGO = cargo 504PAHOLE = pahole 505RESOLVE_BTFIDS = $(objtree)/tools/bpf/resolve_btfids/resolve_btfids 506LEX = flex 507YACC = bison 508AWK = awk 509INSTALLKERNEL := installkernel 510PERL = perl 511PYTHON3 = python3 512CHECK = sparse 513BASH = bash 514KGZIP = gzip 515KBZIP2 = bzip2 516KLZOP = lzop 517LZMA = lzma 518LZ4 = lz4c 519XZ = xz 520ZSTD = zstd 521 522CHECKFLAGS := -D__linux__ -Dlinux -D__STDC__ -Dunix -D__unix__ \ 523 -Wbitwise -Wno-return-void -Wno-unknown-attribute $(CF) 524NOSTDINC_FLAGS := 525CFLAGS_MODULE = 526RUSTFLAGS_MODULE = 527AFLAGS_MODULE = 528LDFLAGS_MODULE = 529CFLAGS_KERNEL = 530RUSTFLAGS_KERNEL = 531AFLAGS_KERNEL = 532LDFLAGS_vmlinux = 533 534# Use USERINCLUDE when you must reference the UAPI directories only. 535USERINCLUDE := \ 536 -I$(srctree)/arch/$(SRCARCH)/include/uapi \ 537 -I$(objtree)/arch/$(SRCARCH)/include/generated/uapi \ 538 -I$(srctree)/include/uapi \ 539 -I$(objtree)/include/generated/uapi \ 540 -include $(srctree)/include/linux/compiler-version.h \ 541 -include $(srctree)/include/linux/kconfig.h 542 543# Use LINUXINCLUDE when you must reference the include/ directory. 544# Needed to be compatible with the O= option 545LINUXINCLUDE := \ 546 -I$(srctree)/arch/$(SRCARCH)/include \ 547 -I$(objtree)/arch/$(SRCARCH)/include/generated \ 548 $(if $(building_out_of_srctree),-I$(srctree)/include) \ 549 -I$(objtree)/include \ 550 $(USERINCLUDE) 551 552KBUILD_AFLAGS := -D__ASSEMBLY__ -fno-PIE 553 554KBUILD_CFLAGS := 555KBUILD_CFLAGS += -std=gnu11 556KBUILD_CFLAGS += -fshort-wchar 557KBUILD_CFLAGS += -funsigned-char 558KBUILD_CFLAGS += -fno-common 559KBUILD_CFLAGS += -fno-PIE 560KBUILD_CFLAGS += -fno-strict-aliasing 561 562KBUILD_CPPFLAGS := -D__KERNEL__ 563KBUILD_RUSTFLAGS := $(rust_common_flags) \ 564 --target=$(objtree)/scripts/target.json \ 565 -Cpanic=abort -Cembed-bitcode=n -Clto=n \ 566 -Cforce-unwind-tables=n -Ccodegen-units=1 \ 567 -Csymbol-mangling-version=v0 \ 568 -Crelocation-model=static \ 569 -Zfunction-sections=n \ 570 -Dclippy::float_arithmetic 571 572KBUILD_AFLAGS_KERNEL := 573KBUILD_CFLAGS_KERNEL := 574KBUILD_RUSTFLAGS_KERNEL := 575KBUILD_AFLAGS_MODULE := -DMODULE 576KBUILD_CFLAGS_MODULE := -DMODULE 577KBUILD_RUSTFLAGS_MODULE := --cfg MODULE 578KBUILD_LDFLAGS_MODULE := 579KBUILD_LDFLAGS := 580CLANG_FLAGS := 581 582ifeq ($(KBUILD_CLIPPY),1) 583 RUSTC_OR_CLIPPY_QUIET := CLIPPY 584 RUSTC_OR_CLIPPY = $(CLIPPY_DRIVER) 585else 586 RUSTC_OR_CLIPPY_QUIET := RUSTC 587 RUSTC_OR_CLIPPY = $(RUSTC) 588endif 589 590ifdef RUST_LIB_SRC 591 export RUST_LIB_SRC 592endif 593 594# Allows the usage of unstable features in stable compilers. 595export RUSTC_BOOTSTRAP := 1 596 597export ARCH SRCARCH CONFIG_SHELL BASH HOSTCC KBUILD_HOSTCFLAGS CROSS_COMPILE LD CC HOSTPKG_CONFIG 598export RUSTC RUSTDOC RUSTFMT RUSTC_OR_CLIPPY_QUIET RUSTC_OR_CLIPPY BINDGEN CARGO 599export HOSTRUSTC KBUILD_HOSTRUSTFLAGS 600export CPP AR NM STRIP OBJCOPY OBJDUMP READELF PAHOLE RESOLVE_BTFIDS LEX YACC AWK INSTALLKERNEL 601export PERL PYTHON3 CHECK CHECKFLAGS MAKE UTS_MACHINE HOSTCXX 602export KGZIP KBZIP2 KLZOP LZMA LZ4 XZ ZSTD 603export KBUILD_HOSTCXXFLAGS KBUILD_HOSTLDFLAGS KBUILD_HOSTLDLIBS LDFLAGS_MODULE 604export KBUILD_USERCFLAGS KBUILD_USERLDFLAGS 605 606export KBUILD_CPPFLAGS NOSTDINC_FLAGS LINUXINCLUDE OBJCOPYFLAGS KBUILD_LDFLAGS 607export KBUILD_CFLAGS CFLAGS_KERNEL CFLAGS_MODULE 608export KBUILD_RUSTFLAGS RUSTFLAGS_KERNEL RUSTFLAGS_MODULE 609export KBUILD_AFLAGS AFLAGS_KERNEL AFLAGS_MODULE 610export KBUILD_AFLAGS_MODULE KBUILD_CFLAGS_MODULE KBUILD_RUSTFLAGS_MODULE KBUILD_LDFLAGS_MODULE 611export KBUILD_AFLAGS_KERNEL KBUILD_CFLAGS_KERNEL KBUILD_RUSTFLAGS_KERNEL 612 613# Files to ignore in find ... statements 614 615export RCS_FIND_IGNORE := \( -name SCCS -o -name BitKeeper -o -name .svn -o \ 616 -name CVS -o -name .pc -o -name .hg -o -name .git \) \ 617 -prune -o 618 619# =========================================================================== 620# Rules shared between *config targets and build targets 621 622# Basic helpers built in scripts/basic/ 623PHONY += scripts_basic 624scripts_basic: 625 $(Q)$(MAKE) $(build)=scripts/basic 626 627PHONY += outputmakefile 628ifdef building_out_of_srctree 629# Before starting out-of-tree build, make sure the source tree is clean. 630# outputmakefile generates a Makefile in the output directory, if using a 631# separate output directory. This allows convenient use of make in the 632# output directory. 633# At the same time when output Makefile generated, generate .gitignore to 634# ignore whole output directory 635 636quiet_cmd_makefile = GEN Makefile 637 cmd_makefile = { \ 638 echo "\# Automatically generated by $(srctree)/Makefile: don't edit"; \ 639 echo "include $(srctree)/Makefile"; \ 640 } > Makefile 641 642outputmakefile: 643 @if [ -f $(srctree)/.config -o \ 644 -d $(srctree)/include/config -o \ 645 -d $(srctree)/arch/$(SRCARCH)/include/generated ]; then \ 646 echo >&2 "***"; \ 647 echo >&2 "*** The source tree is not clean, please run 'make$(if $(findstring command line, $(origin ARCH)), ARCH=$(ARCH)) mrproper'"; \ 648 echo >&2 "*** in $(abs_srctree)";\ 649 echo >&2 "***"; \ 650 false; \ 651 fi 652 $(Q)ln -fsn $(srctree) source 653 $(call cmd,makefile) 654 $(Q)test -e .gitignore || \ 655 { echo "# this is build directory, ignore it"; echo "*"; } > .gitignore 656endif 657 658# The expansion should be delayed until arch/$(SRCARCH)/Makefile is included. 659# Some architectures define CROSS_COMPILE in arch/$(SRCARCH)/Makefile. 660# CC_VERSION_TEXT is referenced from Kconfig (so it needs export), 661# and from include/config/auto.conf.cmd to detect the compiler upgrade. 662CC_VERSION_TEXT = $(subst $(pound),,$(shell LC_ALL=C $(CC) --version 2>/dev/null | head -n 1)) 663 664ifneq ($(findstring clang,$(CC_VERSION_TEXT)),) 665include $(srctree)/scripts/Makefile.clang 666endif 667 668# Include this also for config targets because some architectures need 669# cc-cross-prefix to determine CROSS_COMPILE. 670ifdef need-compiler 671include $(srctree)/scripts/Makefile.compiler 672endif 673 674ifdef config-build 675# =========================================================================== 676# *config targets only - make sure prerequisites are updated, and descend 677# in scripts/kconfig to make the *config target 678 679# Read arch-specific Makefile to set KBUILD_DEFCONFIG as needed. 680# KBUILD_DEFCONFIG may point out an alternative default configuration 681# used for 'make defconfig' 682include $(srctree)/arch/$(SRCARCH)/Makefile 683export KBUILD_DEFCONFIG KBUILD_KCONFIG CC_VERSION_TEXT 684 685config: outputmakefile scripts_basic FORCE 686 $(Q)$(MAKE) $(build)=scripts/kconfig $@ 687 688%config: outputmakefile scripts_basic FORCE 689 $(Q)$(MAKE) $(build)=scripts/kconfig $@ 690 691else #!config-build 692# =========================================================================== 693# Build targets only - this includes vmlinux, arch-specific targets, clean 694# targets and others. In general all targets except *config targets. 695 696# If building an external module we do not care about the all: rule 697# but instead __all depend on modules 698PHONY += all 699ifeq ($(KBUILD_EXTMOD),) 700__all: all 701else 702__all: modules 703endif 704 705targets := 706 707# Decide whether to build built-in, modular, or both. 708# Normally, just do built-in. 709 710KBUILD_MODULES := 711KBUILD_BUILTIN := 1 712 713# If we have only "make modules", don't compile built-in objects. 714ifeq ($(MAKECMDGOALS),modules) 715 KBUILD_BUILTIN := 716endif 717 718# If we have "make <whatever> modules", compile modules 719# in addition to whatever we do anyway. 720# Just "make" or "make all" shall build modules as well 721 722ifneq ($(filter all modules nsdeps %compile_commands.json clang-%,$(MAKECMDGOALS)),) 723 KBUILD_MODULES := 1 724endif 725 726ifeq ($(MAKECMDGOALS),) 727 KBUILD_MODULES := 1 728endif 729 730export KBUILD_MODULES KBUILD_BUILTIN 731 732ifdef need-config 733include include/config/auto.conf 734endif 735 736ifeq ($(KBUILD_EXTMOD),) 737# Objects we will link into vmlinux / subdirs we need to visit 738core-y := 739drivers-y := 740libs-y := lib/ 741endif # KBUILD_EXTMOD 742 743# The all: target is the default when no target is given on the 744# command line. 745# This allow a user to issue only 'make' to build a kernel including modules 746# Defaults to vmlinux, but the arch makefile usually adds further targets 747all: vmlinux 748 749CFLAGS_GCOV := -fprofile-arcs -ftest-coverage 750ifdef CONFIG_CC_IS_GCC 751CFLAGS_GCOV += -fno-tree-loop-im 752endif 753export CFLAGS_GCOV 754 755# The arch Makefiles can override CC_FLAGS_FTRACE. We may also append it later. 756ifdef CONFIG_FUNCTION_TRACER 757 CC_FLAGS_FTRACE := -pg 758endif 759 760include $(srctree)/arch/$(SRCARCH)/Makefile 761 762ifdef need-config 763ifdef may-sync-config 764# Read in dependencies to all Kconfig* files, make sure to run syncconfig if 765# changes are detected. This should be included after arch/$(SRCARCH)/Makefile 766# because some architectures define CROSS_COMPILE there. 767include include/config/auto.conf.cmd 768 769$(KCONFIG_CONFIG): 770 @echo >&2 '***' 771 @echo >&2 '*** Configuration file "$@" not found!' 772 @echo >&2 '***' 773 @echo >&2 '*** Please run some configurator (e.g. "make oldconfig" or' 774 @echo >&2 '*** "make menuconfig" or "make xconfig").' 775 @echo >&2 '***' 776 @/bin/false 777 778# The actual configuration files used during the build are stored in 779# include/generated/ and include/config/. Update them if .config is newer than 780# include/config/auto.conf (which mirrors .config). 781# 782# This exploits the 'multi-target pattern rule' trick. 783# The syncconfig should be executed only once to make all the targets. 784# (Note: use the grouped target '&:' when we bump to GNU Make 4.3) 785# 786# Do not use $(call cmd,...) here. That would suppress prompts from syncconfig, 787# so you cannot notice that Kconfig is waiting for the user input. 788%/config/auto.conf %/config/auto.conf.cmd %/generated/autoconf.h %/generated/rustc_cfg: $(KCONFIG_CONFIG) 789 $(Q)$(kecho) " SYNC $@" 790 $(Q)$(MAKE) -f $(srctree)/Makefile syncconfig 791else # !may-sync-config 792# External modules and some install targets need include/generated/autoconf.h 793# and include/config/auto.conf but do not care if they are up-to-date. 794# Use auto.conf to trigger the test 795PHONY += include/config/auto.conf 796 797include/config/auto.conf: 798 @test -e include/generated/autoconf.h -a -e $@ || ( \ 799 echo >&2; \ 800 echo >&2 " ERROR: Kernel configuration is invalid."; \ 801 echo >&2 " include/generated/autoconf.h or $@ are missing.";\ 802 echo >&2 " Run 'make oldconfig && make prepare' on kernel src to fix it."; \ 803 echo >&2 ; \ 804 /bin/false) 805 806endif # may-sync-config 807endif # need-config 808 809KBUILD_CFLAGS += -fno-delete-null-pointer-checks 810 811ifdef CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE 812KBUILD_CFLAGS += -O2 813KBUILD_RUSTFLAGS += -Copt-level=2 814else ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE 815KBUILD_CFLAGS += -Os 816KBUILD_RUSTFLAGS += -Copt-level=s 817endif 818 819# Always set `debug-assertions` and `overflow-checks` because their default 820# depends on `opt-level` and `debug-assertions`, respectively. 821KBUILD_RUSTFLAGS += -Cdebug-assertions=$(if $(CONFIG_RUST_DEBUG_ASSERTIONS),y,n) 822KBUILD_RUSTFLAGS += -Coverflow-checks=$(if $(CONFIG_RUST_OVERFLOW_CHECKS),y,n) 823 824# Tell gcc to never replace conditional load with a non-conditional one 825ifdef CONFIG_CC_IS_GCC 826# gcc-10 renamed --param=allow-store-data-races=0 to 827# -fno-allow-store-data-races. 828KBUILD_CFLAGS += $(call cc-option,--param=allow-store-data-races=0) 829KBUILD_CFLAGS += $(call cc-option,-fno-allow-store-data-races) 830endif 831 832ifdef CONFIG_READABLE_ASM 833# Disable optimizations that make assembler listings hard to read. 834# reorder blocks reorders the control in the function 835# ipa clone creates specialized cloned functions 836# partial inlining inlines only parts of functions 837KBUILD_CFLAGS += -fno-reorder-blocks -fno-ipa-cp-clone -fno-partial-inlining 838endif 839 840stackp-flags-y := -fno-stack-protector 841stackp-flags-$(CONFIG_STACKPROTECTOR) := -fstack-protector 842stackp-flags-$(CONFIG_STACKPROTECTOR_STRONG) := -fstack-protector-strong 843 844KBUILD_CFLAGS += $(stackp-flags-y) 845 846KBUILD_RUSTFLAGS-$(CONFIG_WERROR) += -Dwarnings 847KBUILD_RUSTFLAGS += $(KBUILD_RUSTFLAGS-y) 848 849ifdef CONFIG_FRAME_POINTER 850KBUILD_CFLAGS += -fno-omit-frame-pointer -fno-optimize-sibling-calls 851KBUILD_RUSTFLAGS += -Cforce-frame-pointers=y 852else 853# Some targets (ARM with Thumb2, for example), can't be built with frame 854# pointers. For those, we don't have FUNCTION_TRACER automatically 855# select FRAME_POINTER. However, FUNCTION_TRACER adds -pg, and this is 856# incompatible with -fomit-frame-pointer with current GCC, so we don't use 857# -fomit-frame-pointer with FUNCTION_TRACER. 858# In the Rust target specification, "frame-pointer" is set explicitly 859# to "may-omit". 860ifndef CONFIG_FUNCTION_TRACER 861KBUILD_CFLAGS += -fomit-frame-pointer 862endif 863endif 864 865# Initialize all stack variables with a 0xAA pattern. 866ifdef CONFIG_INIT_STACK_ALL_PATTERN 867KBUILD_CFLAGS += -ftrivial-auto-var-init=pattern 868endif 869 870# Initialize all stack variables with a zero value. 871ifdef CONFIG_INIT_STACK_ALL_ZERO 872KBUILD_CFLAGS += -ftrivial-auto-var-init=zero 873ifdef CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO_ENABLER 874# https://github.com/llvm/llvm-project/issues/44842 875CC_AUTO_VAR_INIT_ZERO_ENABLER := -enable-trivial-auto-var-init-zero-knowing-it-will-be-removed-from-clang 876export CC_AUTO_VAR_INIT_ZERO_ENABLER 877KBUILD_CFLAGS += $(CC_AUTO_VAR_INIT_ZERO_ENABLER) 878endif 879endif 880 881# While VLAs have been removed, GCC produces unreachable stack probes 882# for the randomize_kstack_offset feature. Disable it for all compilers. 883KBUILD_CFLAGS += $(call cc-option, -fno-stack-clash-protection) 884 885# Clear used registers at func exit (to reduce data lifetime and ROP gadgets). 886ifdef CONFIG_ZERO_CALL_USED_REGS 887KBUILD_CFLAGS += -fzero-call-used-regs=used-gpr 888endif 889 890ifdef CONFIG_FUNCTION_TRACER 891ifdef CONFIG_FTRACE_MCOUNT_USE_CC 892 CC_FLAGS_FTRACE += -mrecord-mcount 893 ifdef CONFIG_HAVE_NOP_MCOUNT 894 ifeq ($(call cc-option-yn, -mnop-mcount),y) 895 CC_FLAGS_FTRACE += -mnop-mcount 896 CC_FLAGS_USING += -DCC_USING_NOP_MCOUNT 897 endif 898 endif 899endif 900ifdef CONFIG_FTRACE_MCOUNT_USE_OBJTOOL 901 ifdef CONFIG_HAVE_OBJTOOL_NOP_MCOUNT 902 CC_FLAGS_USING += -DCC_USING_NOP_MCOUNT 903 endif 904endif 905ifdef CONFIG_FTRACE_MCOUNT_USE_RECORDMCOUNT 906 ifdef CONFIG_HAVE_C_RECORDMCOUNT 907 BUILD_C_RECORDMCOUNT := y 908 export BUILD_C_RECORDMCOUNT 909 endif 910endif 911ifdef CONFIG_HAVE_FENTRY 912 # s390-linux-gnu-gcc did not support -mfentry until gcc-9. 913 ifeq ($(call cc-option-yn, -mfentry),y) 914 CC_FLAGS_FTRACE += -mfentry 915 CC_FLAGS_USING += -DCC_USING_FENTRY 916 endif 917endif 918export CC_FLAGS_FTRACE 919KBUILD_CFLAGS += $(CC_FLAGS_FTRACE) $(CC_FLAGS_USING) 920KBUILD_AFLAGS += $(CC_FLAGS_USING) 921endif 922 923# We trigger additional mismatches with less inlining 924ifdef CONFIG_DEBUG_SECTION_MISMATCH 925KBUILD_CFLAGS += -fno-inline-functions-called-once 926endif 927 928# `rustc`'s `-Zfunction-sections` applies to data too (as of 1.59.0). 929ifdef CONFIG_LD_DEAD_CODE_DATA_ELIMINATION 930KBUILD_CFLAGS_KERNEL += -ffunction-sections -fdata-sections 931KBUILD_RUSTFLAGS_KERNEL += -Zfunction-sections=y 932LDFLAGS_vmlinux += --gc-sections 933endif 934 935ifdef CONFIG_SHADOW_CALL_STACK 936ifndef CONFIG_DYNAMIC_SCS 937CC_FLAGS_SCS := -fsanitize=shadow-call-stack 938KBUILD_CFLAGS += $(CC_FLAGS_SCS) 939endif 940export CC_FLAGS_SCS 941endif 942 943ifdef CONFIG_LTO_CLANG 944ifdef CONFIG_LTO_CLANG_THIN 945CC_FLAGS_LTO := -flto=thin -fsplit-lto-unit 946KBUILD_LDFLAGS += --thinlto-cache-dir=$(extmod_prefix).thinlto-cache 947else 948CC_FLAGS_LTO := -flto 949endif 950CC_FLAGS_LTO += -fvisibility=hidden 951 952# Limit inlining across translation units to reduce binary size 953KBUILD_LDFLAGS += -mllvm -import-instr-limit=5 954endif 955 956ifdef CONFIG_LTO 957KBUILD_CFLAGS += -fno-lto $(CC_FLAGS_LTO) 958KBUILD_AFLAGS += -fno-lto 959export CC_FLAGS_LTO 960endif 961 962ifdef CONFIG_CFI_CLANG 963CC_FLAGS_CFI := -fsanitize=kcfi 964KBUILD_CFLAGS += $(CC_FLAGS_CFI) 965export CC_FLAGS_CFI 966endif 967 968ifneq ($(CONFIG_FUNCTION_ALIGNMENT),0) 969KBUILD_CFLAGS += -falign-functions=$(CONFIG_FUNCTION_ALIGNMENT) 970endif 971 972# arch Makefile may override CC so keep this after arch Makefile is included 973NOSTDINC_FLAGS += -nostdinc 974 975# To gain proper coverage for CONFIG_UBSAN_BOUNDS and CONFIG_FORTIFY_SOURCE, 976# the kernel uses only C99 flexible arrays for dynamically sized trailing 977# arrays. Enforce this for everything that may examine structure sizes and 978# perform bounds checking. 979KBUILD_CFLAGS += $(call cc-option, -fstrict-flex-arrays=3) 980 981#Currently, disable -Wstringop-overflow for GCC 11, globally. 982KBUILD_CFLAGS-$(CONFIG_CC_NO_STRINGOP_OVERFLOW) += $(call cc-option, -Wno-stringop-overflow) 983KBUILD_CFLAGS-$(CONFIG_CC_STRINGOP_OVERFLOW) += $(call cc-option, -Wstringop-overflow) 984 985# disable invalid "can't wrap" optimizations for signed / pointers 986KBUILD_CFLAGS += -fno-strict-overflow 987 988# Make sure -fstack-check isn't enabled (like gentoo apparently did) 989KBUILD_CFLAGS += -fno-stack-check 990 991# conserve stack if available 992ifdef CONFIG_CC_IS_GCC 993KBUILD_CFLAGS += -fconserve-stack 994endif 995 996# change __FILE__ to the relative path from the srctree 997KBUILD_CPPFLAGS += $(call cc-option,-fmacro-prefix-map=$(srctree)/=) 998 999# include additional Makefiles when needed 1000include-y := scripts/Makefile.extrawarn 1001include-$(CONFIG_DEBUG_INFO) += scripts/Makefile.debug 1002include-$(CONFIG_DEBUG_INFO_BTF)+= scripts/Makefile.btf 1003include-$(CONFIG_KASAN) += scripts/Makefile.kasan 1004include-$(CONFIG_KCSAN) += scripts/Makefile.kcsan 1005include-$(CONFIG_KMSAN) += scripts/Makefile.kmsan 1006include-$(CONFIG_UBSAN) += scripts/Makefile.ubsan 1007include-$(CONFIG_KCOV) += scripts/Makefile.kcov 1008include-$(CONFIG_RANDSTRUCT) += scripts/Makefile.randstruct 1009include-$(CONFIG_GCC_PLUGINS) += scripts/Makefile.gcc-plugins 1010 1011include $(addprefix $(srctree)/, $(include-y)) 1012 1013# scripts/Makefile.gcc-plugins is intentionally included last. 1014# Do not add $(call cc-option,...) below this line. When you build the kernel 1015# from the clean source tree, the GCC plugins do not exist at this point. 1016 1017# Add user supplied CPPFLAGS, AFLAGS, CFLAGS and RUSTFLAGS as the last assignments 1018KBUILD_CPPFLAGS += $(KCPPFLAGS) 1019KBUILD_AFLAGS += $(KAFLAGS) 1020KBUILD_CFLAGS += $(KCFLAGS) 1021KBUILD_RUSTFLAGS += $(KRUSTFLAGS) 1022 1023KBUILD_LDFLAGS_MODULE += --build-id=sha1 1024LDFLAGS_vmlinux += --build-id=sha1 1025 1026KBUILD_LDFLAGS += -z noexecstack 1027ifeq ($(CONFIG_LD_IS_BFD),y) 1028KBUILD_LDFLAGS += $(call ld-option,--no-warn-rwx-segments) 1029endif 1030 1031ifeq ($(CONFIG_STRIP_ASM_SYMS),y) 1032LDFLAGS_vmlinux += -X 1033endif 1034 1035ifeq ($(CONFIG_RELR),y) 1036# ld.lld before 15 did not support -z pack-relative-relocs. 1037LDFLAGS_vmlinux += $(call ld-option,--pack-dyn-relocs=relr,-z pack-relative-relocs) 1038endif 1039 1040# We never want expected sections to be placed heuristically by the 1041# linker. All sections should be explicitly named in the linker script. 1042ifdef CONFIG_LD_ORPHAN_WARN 1043LDFLAGS_vmlinux += --orphan-handling=$(CONFIG_LD_ORPHAN_WARN_LEVEL) 1044endif 1045 1046# Align the bit size of userspace programs with the kernel 1047KBUILD_USERCFLAGS += $(filter -m32 -m64 --target=%, $(KBUILD_CFLAGS)) 1048KBUILD_USERLDFLAGS += $(filter -m32 -m64 --target=%, $(KBUILD_CFLAGS)) 1049 1050# make the checker run with the right architecture 1051CHECKFLAGS += --arch=$(ARCH) 1052 1053# insure the checker run with the right endianness 1054CHECKFLAGS += $(if $(CONFIG_CPU_BIG_ENDIAN),-mbig-endian,-mlittle-endian) 1055 1056# the checker needs the correct machine size 1057CHECKFLAGS += $(if $(CONFIG_64BIT),-m64,-m32) 1058 1059# Default kernel image to build when no specific target is given. 1060# KBUILD_IMAGE may be overruled on the command line or 1061# set in the environment 1062# Also any assignments in arch/$(ARCH)/Makefile take precedence over 1063# this default value 1064export KBUILD_IMAGE ?= vmlinux 1065 1066# 1067# INSTALL_PATH specifies where to place the updated kernel and system map 1068# images. Default is /boot, but you can set it to other values 1069export INSTALL_PATH ?= /boot 1070 1071# 1072# INSTALL_DTBS_PATH specifies a prefix for relocations required by build roots. 1073# Like INSTALL_MOD_PATH, it isn't defined in the Makefile, but can be passed as 1074# an argument if needed. Otherwise it defaults to the kernel install path 1075# 1076export INSTALL_DTBS_PATH ?= $(INSTALL_PATH)/dtbs/$(KERNELRELEASE) 1077 1078# 1079# INSTALL_MOD_PATH specifies a prefix to MODLIB for module directory 1080# relocations required by build roots. This is not defined in the 1081# makefile but the argument can be passed to make if needed. 1082# 1083 1084MODLIB = $(INSTALL_MOD_PATH)/lib/modules/$(KERNELRELEASE) 1085export MODLIB 1086 1087PHONY += prepare0 1088 1089export extmod_prefix = $(if $(KBUILD_EXTMOD),$(KBUILD_EXTMOD)/) 1090export MODORDER := $(extmod_prefix)modules.order 1091export MODULES_NSDEPS := $(extmod_prefix)modules.nsdeps 1092 1093ifeq ($(KBUILD_EXTMOD),) 1094 1095build-dir := . 1096clean-dirs := $(sort . Documentation \ 1097 $(patsubst %/,%,$(filter %/, $(core-) \ 1098 $(drivers-) $(libs-)))) 1099 1100export ARCH_CORE := $(core-y) 1101export ARCH_LIB := $(filter %/, $(libs-y)) 1102export ARCH_DRIVERS := $(drivers-y) $(drivers-m) 1103# Externally visible symbols (used by link-vmlinux.sh) 1104 1105KBUILD_VMLINUX_OBJS := ./built-in.a 1106ifdef CONFIG_MODULES 1107KBUILD_VMLINUX_OBJS += $(patsubst %/, %/lib.a, $(filter %/, $(libs-y))) 1108KBUILD_VMLINUX_LIBS := $(filter-out %/, $(libs-y)) 1109else 1110KBUILD_VMLINUX_LIBS := $(patsubst %/,%/lib.a, $(libs-y)) 1111endif 1112 1113export KBUILD_VMLINUX_LIBS 1114export KBUILD_LDS := arch/$(SRCARCH)/kernel/vmlinux.lds 1115 1116ifdef CONFIG_TRIM_UNUSED_KSYMS 1117# For the kernel to actually contain only the needed exported symbols, 1118# we have to build modules as well to determine what those symbols are. 1119KBUILD_MODULES := 1 1120endif 1121 1122# '$(AR) mPi' needs 'T' to workaround the bug of llvm-ar <= 14 1123quiet_cmd_ar_vmlinux.a = AR $@ 1124 cmd_ar_vmlinux.a = \ 1125 rm -f $@; \ 1126 $(AR) cDPrST $@ $(KBUILD_VMLINUX_OBJS); \ 1127 $(AR) mPiT $$($(AR) t $@ | sed -n 1p) $@ $$($(AR) t $@ | grep -F -f $(srctree)/scripts/head-object-list.txt) 1128 1129targets += vmlinux.a 1130vmlinux.a: $(KBUILD_VMLINUX_OBJS) scripts/head-object-list.txt FORCE 1131 $(call if_changed,ar_vmlinux.a) 1132 1133PHONY += vmlinux_o 1134vmlinux_o: vmlinux.a $(KBUILD_VMLINUX_LIBS) 1135 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.vmlinux_o 1136 1137vmlinux.o modules.builtin.modinfo modules.builtin: vmlinux_o 1138 @: 1139 1140PHONY += vmlinux 1141# LDFLAGS_vmlinux in the top Makefile defines linker flags for the top vmlinux, 1142# not for decompressors. LDFLAGS_vmlinux in arch/*/boot/compressed/Makefile is 1143# unrelated; the decompressors just happen to have the same base name, 1144# arch/*/boot/compressed/vmlinux. 1145# Export LDFLAGS_vmlinux only to scripts/Makefile.vmlinux. 1146# 1147# _LDFLAGS_vmlinux is a workaround for the 'private export' bug: 1148# https://savannah.gnu.org/bugs/?61463 1149# For Make > 4.4, the following simple code will work: 1150# vmlinux: private export LDFLAGS_vmlinux := $(LDFLAGS_vmlinux) 1151vmlinux: private _LDFLAGS_vmlinux := $(LDFLAGS_vmlinux) 1152vmlinux: export LDFLAGS_vmlinux = $(_LDFLAGS_vmlinux) 1153vmlinux: vmlinux.o $(KBUILD_LDS) modpost 1154 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.vmlinux 1155 1156# The actual objects are generated when descending, 1157# make sure no implicit rule kicks in 1158$(sort $(KBUILD_LDS) $(KBUILD_VMLINUX_OBJS) $(KBUILD_VMLINUX_LIBS)): . ; 1159 1160ifeq ($(origin KERNELRELEASE),file) 1161filechk_kernel.release = $(srctree)/scripts/setlocalversion $(srctree) 1162else 1163filechk_kernel.release = echo $(KERNELRELEASE) 1164endif 1165 1166# Store (new) KERNELRELEASE string in include/config/kernel.release 1167include/config/kernel.release: FORCE 1168 $(call filechk,kernel.release) 1169 1170# Additional helpers built in scripts/ 1171# Carefully list dependencies so we do not try to build scripts twice 1172# in parallel 1173PHONY += scripts 1174scripts: scripts_basic scripts_dtc 1175 $(Q)$(MAKE) $(build)=$(@) 1176 1177# Things we need to do before we recursively start building the kernel 1178# or the modules are listed in "prepare". 1179# A multi level approach is used. prepareN is processed before prepareN-1. 1180# archprepare is used in arch Makefiles and when processed asm symlink, 1181# version.h and scripts_basic is processed / created. 1182 1183PHONY += prepare archprepare 1184 1185archprepare: outputmakefile archheaders archscripts scripts include/config/kernel.release \ 1186 asm-generic $(version_h) include/generated/utsrelease.h \ 1187 include/generated/compile.h include/generated/autoconf.h remove-stale-files 1188 1189prepare0: archprepare 1190 $(Q)$(MAKE) $(build)=scripts/mod 1191 $(Q)$(MAKE) $(build)=. prepare 1192 1193# All the preparing.. 1194prepare: prepare0 1195ifdef CONFIG_RUST 1196 $(Q)$(CONFIG_SHELL) $(srctree)/scripts/rust_is_available.sh 1197 $(Q)$(MAKE) $(build)=rust 1198endif 1199 1200PHONY += remove-stale-files 1201remove-stale-files: 1202 $(Q)$(srctree)/scripts/remove-stale-files 1203 1204# Support for using generic headers in asm-generic 1205asm-generic := -f $(srctree)/scripts/Makefile.asm-generic obj 1206 1207PHONY += asm-generic uapi-asm-generic 1208asm-generic: uapi-asm-generic 1209 $(Q)$(MAKE) $(asm-generic)=arch/$(SRCARCH)/include/generated/asm \ 1210 generic=include/asm-generic 1211uapi-asm-generic: 1212 $(Q)$(MAKE) $(asm-generic)=arch/$(SRCARCH)/include/generated/uapi/asm \ 1213 generic=include/uapi/asm-generic 1214 1215# Generate some files 1216# --------------------------------------------------------------------------- 1217 1218# KERNELRELEASE can change from a few different places, meaning version.h 1219# needs to be updated, so this check is forced on all builds 1220 1221uts_len := 64 1222define filechk_utsrelease.h 1223 if [ `echo -n "$(KERNELRELEASE)" | wc -c ` -gt $(uts_len) ]; then \ 1224 echo '"$(KERNELRELEASE)" exceeds $(uts_len) characters' >&2; \ 1225 exit 1; \ 1226 fi; \ 1227 echo \#define UTS_RELEASE \"$(KERNELRELEASE)\" 1228endef 1229 1230define filechk_version.h 1231 if [ $(SUBLEVEL) -gt 255 ]; then \ 1232 echo \#define LINUX_VERSION_CODE $(shell \ 1233 expr $(VERSION) \* 65536 + $(PATCHLEVEL) \* 256 + 255); \ 1234 else \ 1235 echo \#define LINUX_VERSION_CODE $(shell \ 1236 expr $(VERSION) \* 65536 + $(PATCHLEVEL) \* 256 + $(SUBLEVEL)); \ 1237 fi; \ 1238 echo '#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + \ 1239 ((c) > 255 ? 255 : (c)))'; \ 1240 echo \#define LINUX_VERSION_MAJOR $(VERSION); \ 1241 echo \#define LINUX_VERSION_PATCHLEVEL $(PATCHLEVEL); \ 1242 echo \#define LINUX_VERSION_SUBLEVEL $(SUBLEVEL) 1243endef 1244 1245$(version_h): PATCHLEVEL := $(or $(PATCHLEVEL), 0) 1246$(version_h): SUBLEVEL := $(or $(SUBLEVEL), 0) 1247$(version_h): FORCE 1248 $(call filechk,version.h) 1249 1250include/generated/utsrelease.h: include/config/kernel.release FORCE 1251 $(call filechk,utsrelease.h) 1252 1253filechk_compile.h = $(srctree)/scripts/mkcompile_h \ 1254 "$(UTS_MACHINE)" "$(CONFIG_CC_VERSION_TEXT)" "$(LD)" 1255 1256include/generated/compile.h: FORCE 1257 $(call filechk,compile.h) 1258 1259PHONY += headerdep 1260headerdep: 1261 $(Q)find $(srctree)/include/ -name '*.h' | xargs --max-args 1 \ 1262 $(srctree)/scripts/headerdep.pl -I$(srctree)/include 1263 1264# --------------------------------------------------------------------------- 1265# Kernel headers 1266 1267#Default location for installed headers 1268export INSTALL_HDR_PATH = $(objtree)/usr 1269 1270quiet_cmd_headers_install = INSTALL $(INSTALL_HDR_PATH)/include 1271 cmd_headers_install = \ 1272 mkdir -p $(INSTALL_HDR_PATH); \ 1273 rsync -mrl --include='*/' --include='*\.h' --exclude='*' \ 1274 usr/include $(INSTALL_HDR_PATH) 1275 1276PHONY += headers_install 1277headers_install: headers 1278 $(call cmd,headers_install) 1279 1280PHONY += archheaders archscripts 1281 1282hdr-inst := -f $(srctree)/scripts/Makefile.headersinst obj 1283 1284PHONY += headers 1285headers: $(version_h) scripts_unifdef uapi-asm-generic archheaders archscripts 1286 $(if $(filter um, $(SRCARCH)), $(error Headers not exportable for UML)) 1287 $(Q)$(MAKE) $(hdr-inst)=include/uapi 1288 $(Q)$(MAKE) $(hdr-inst)=arch/$(SRCARCH)/include/uapi 1289 1290ifdef CONFIG_HEADERS_INSTALL 1291prepare: headers 1292endif 1293 1294PHONY += scripts_unifdef 1295scripts_unifdef: scripts_basic 1296 $(Q)$(MAKE) $(build)=scripts scripts/unifdef 1297 1298# --------------------------------------------------------------------------- 1299# Install 1300 1301# Many distributions have the custom install script, /sbin/installkernel. 1302# If DKMS is installed, 'make install' will eventually recurse back 1303# to this Makefile to build and install external modules. 1304# Cancel sub_make_done so that options such as M=, V=, etc. are parsed. 1305 1306quiet_cmd_install = INSTALL $(INSTALL_PATH) 1307 cmd_install = unset sub_make_done; $(srctree)/scripts/install.sh 1308 1309# --------------------------------------------------------------------------- 1310# vDSO install 1311 1312PHONY += vdso_install 1313vdso_install: export INSTALL_FILES = $(vdso-install-y) 1314vdso_install: 1315 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.vdsoinst 1316 1317# --------------------------------------------------------------------------- 1318# Tools 1319 1320ifdef CONFIG_OBJTOOL 1321prepare: tools/objtool 1322endif 1323 1324ifdef CONFIG_BPF 1325ifdef CONFIG_DEBUG_INFO_BTF 1326prepare: tools/bpf/resolve_btfids 1327endif 1328endif 1329 1330PHONY += resolve_btfids_clean 1331 1332resolve_btfids_O = $(abspath $(objtree))/tools/bpf/resolve_btfids 1333 1334# tools/bpf/resolve_btfids directory might not exist 1335# in output directory, skip its clean in that case 1336resolve_btfids_clean: 1337ifneq ($(wildcard $(resolve_btfids_O)),) 1338 $(Q)$(MAKE) -sC $(srctree)/tools/bpf/resolve_btfids O=$(resolve_btfids_O) clean 1339endif 1340 1341# Clear a bunch of variables before executing the submake 1342ifeq ($(quiet),silent_) 1343tools_silent=s 1344endif 1345 1346tools/: FORCE 1347 $(Q)mkdir -p $(objtree)/tools 1348 $(Q)$(MAKE) LDFLAGS= MAKEFLAGS="$(tools_silent) $(filter --j% -j,$(MAKEFLAGS))" O=$(abspath $(objtree)) subdir=tools -C $(srctree)/tools/ 1349 1350tools/%: FORCE 1351 $(Q)mkdir -p $(objtree)/tools 1352 $(Q)$(MAKE) LDFLAGS= MAKEFLAGS="$(tools_silent) $(filter --j% -j,$(MAKEFLAGS))" O=$(abspath $(objtree)) subdir=tools -C $(srctree)/tools/ $* 1353 1354# --------------------------------------------------------------------------- 1355# Kernel selftest 1356 1357PHONY += kselftest 1358kselftest: headers 1359 $(Q)$(MAKE) -C $(srctree)/tools/testing/selftests run_tests 1360 1361kselftest-%: headers FORCE 1362 $(Q)$(MAKE) -C $(srctree)/tools/testing/selftests $* 1363 1364PHONY += kselftest-merge 1365kselftest-merge: 1366 $(if $(wildcard $(objtree)/.config),, $(error No .config exists, config your kernel first!)) 1367 $(Q)find $(srctree)/tools/testing/selftests -name config -o -name config.$(UTS_MACHINE) | \ 1368 xargs $(srctree)/scripts/kconfig/merge_config.sh -y -m $(objtree)/.config 1369 $(Q)$(MAKE) -f $(srctree)/Makefile olddefconfig 1370 1371# --------------------------------------------------------------------------- 1372# Devicetree files 1373 1374ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/boot/dts/),) 1375dtstree := arch/$(SRCARCH)/boot/dts 1376endif 1377 1378ifneq ($(dtstree),) 1379 1380%.dtb: dtbs_prepare 1381 $(Q)$(MAKE) $(build)=$(dtstree) $(dtstree)/$@ 1382 1383%.dtbo: dtbs_prepare 1384 $(Q)$(MAKE) $(build)=$(dtstree) $(dtstree)/$@ 1385 1386PHONY += dtbs dtbs_prepare dtbs_install dtbs_check 1387dtbs: dtbs_prepare 1388 $(Q)$(MAKE) $(build)=$(dtstree) 1389 1390# include/config/kernel.release is actually needed when installing DTBs because 1391# INSTALL_DTBS_PATH contains $(KERNELRELEASE). However, we do not want to make 1392# dtbs_install depend on it as dtbs_install may run as root. 1393dtbs_prepare: include/config/kernel.release scripts_dtc 1394 1395ifneq ($(filter dtbs_check, $(MAKECMDGOALS)),) 1396export CHECK_DTBS=y 1397endif 1398 1399ifneq ($(CHECK_DTBS),) 1400dtbs_prepare: dt_binding_check 1401endif 1402 1403dtbs_check: dtbs 1404 1405dtbs_install: 1406 $(Q)$(MAKE) $(dtbinst)=$(dtstree) dst=$(INSTALL_DTBS_PATH) 1407 1408ifdef CONFIG_OF_EARLY_FLATTREE 1409all: dtbs 1410endif 1411 1412endif 1413 1414PHONY += scripts_dtc 1415scripts_dtc: scripts_basic 1416 $(Q)$(MAKE) $(build)=scripts/dtc 1417 1418ifneq ($(filter dt_binding_check, $(MAKECMDGOALS)),) 1419export CHECK_DT_BINDING=y 1420endif 1421 1422PHONY += dt_binding_check 1423dt_binding_check: scripts_dtc 1424 $(Q)$(MAKE) $(build)=Documentation/devicetree/bindings 1425 1426PHONY += dt_compatible_check 1427dt_compatible_check: dt_binding_check 1428 $(Q)$(MAKE) $(build)=Documentation/devicetree/bindings $@ 1429 1430# --------------------------------------------------------------------------- 1431# Modules 1432 1433ifdef CONFIG_MODULES 1434 1435# By default, build modules as well 1436 1437all: modules 1438 1439# When we're building modules with modversions, we need to consider 1440# the built-in objects during the descend as well, in order to 1441# make sure the checksums are up to date before we record them. 1442ifdef CONFIG_MODVERSIONS 1443 KBUILD_BUILTIN := 1 1444endif 1445 1446# Build modules 1447# 1448 1449# *.ko are usually independent of vmlinux, but CONFIG_DEBUG_INFO_BTF_MODULES 1450# is an exception. 1451ifdef CONFIG_DEBUG_INFO_BTF_MODULES 1452KBUILD_BUILTIN := 1 1453modules: vmlinux 1454endif 1455 1456modules: modules_prepare 1457 1458# Target to prepare building external modules 1459modules_prepare: prepare 1460 $(Q)$(MAKE) $(build)=scripts scripts/module.lds 1461 1462endif # CONFIG_MODULES 1463 1464### 1465# Cleaning is done on three levels. 1466# make clean Delete most generated files 1467# Leave enough to build external modules 1468# make mrproper Delete the current configuration, and all generated files 1469# make distclean Remove editor backup files, patch leftover files and the like 1470 1471# Directories & files removed with 'make clean' 1472CLEAN_FILES += vmlinux.symvers modules-only.symvers \ 1473 modules.builtin modules.builtin.modinfo modules.nsdeps \ 1474 compile_commands.json .thinlto-cache rust/test \ 1475 rust-project.json .vmlinux.objs .vmlinux.export.c 1476 1477# Directories & files removed with 'make mrproper' 1478MRPROPER_FILES += include/config include/generated \ 1479 arch/$(SRCARCH)/include/generated .objdiff \ 1480 debian snap tar-install \ 1481 .config .config.old .version \ 1482 Module.symvers \ 1483 certs/signing_key.pem \ 1484 certs/x509.genkey \ 1485 vmlinux-gdb.py \ 1486 rpmbuild \ 1487 rust/libmacros.so 1488 1489# clean - Delete most, but leave enough to build external modules 1490# 1491clean: rm-files := $(CLEAN_FILES) 1492 1493PHONY += archclean vmlinuxclean 1494 1495vmlinuxclean: 1496 $(Q)$(CONFIG_SHELL) $(srctree)/scripts/link-vmlinux.sh clean 1497 $(Q)$(if $(ARCH_POSTLINK), $(MAKE) -f $(ARCH_POSTLINK) clean) 1498 1499clean: archclean vmlinuxclean resolve_btfids_clean 1500 1501# mrproper - Delete all generated files, including .config 1502# 1503mrproper: rm-files := $(wildcard $(MRPROPER_FILES)) 1504mrproper-dirs := $(addprefix _mrproper_,scripts) 1505 1506PHONY += $(mrproper-dirs) mrproper 1507$(mrproper-dirs): 1508 $(Q)$(MAKE) $(clean)=$(patsubst _mrproper_%,%,$@) 1509 1510mrproper: clean $(mrproper-dirs) 1511 $(call cmd,rmfiles) 1512 @find . $(RCS_FIND_IGNORE) \ 1513 \( -name '*.rmeta' \) \ 1514 -type f -print | xargs rm -f 1515 1516# distclean 1517# 1518PHONY += distclean 1519 1520distclean: mrproper 1521 @find . $(RCS_FIND_IGNORE) \ 1522 \( -name '*.orig' -o -name '*.rej' -o -name '*~' \ 1523 -o -name '*.bak' -o -name '#*#' -o -name '*%' \ 1524 -o -name 'core' -o -name tags -o -name TAGS -o -name 'cscope*' \ 1525 -o -name GPATH -o -name GRTAGS -o -name GSYMS -o -name GTAGS \) \ 1526 -type f -print | xargs rm -f 1527 1528 1529# Packaging of the kernel to various formats 1530# --------------------------------------------------------------------------- 1531 1532%src-pkg: FORCE 1533 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.package $@ 1534%pkg: include/config/kernel.release FORCE 1535 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.package $@ 1536 1537# Brief documentation of the typical targets used 1538# --------------------------------------------------------------------------- 1539 1540boards := $(wildcard $(srctree)/arch/$(SRCARCH)/configs/*_defconfig) 1541boards := $(sort $(notdir $(boards))) 1542board-dirs := $(dir $(wildcard $(srctree)/arch/$(SRCARCH)/configs/*/*_defconfig)) 1543board-dirs := $(sort $(notdir $(board-dirs:/=))) 1544 1545PHONY += help 1546help: 1547 @echo 'Cleaning targets:' 1548 @echo ' clean - Remove most generated files but keep the config and' 1549 @echo ' enough build support to build external modules' 1550 @echo ' mrproper - Remove all generated files + config + various backup files' 1551 @echo ' distclean - mrproper + remove editor backup and patch files' 1552 @echo '' 1553 @$(MAKE) -f $(srctree)/scripts/kconfig/Makefile help 1554 @echo '' 1555 @echo 'Other generic targets:' 1556 @echo ' all - Build all targets marked with [*]' 1557 @echo '* vmlinux - Build the bare kernel' 1558 @echo '* modules - Build all modules' 1559 @echo ' modules_install - Install all modules to INSTALL_MOD_PATH (default: /)' 1560 @echo ' vdso_install - Install unstripped vdso to INSTALL_MOD_PATH (default: /)' 1561 @echo ' dir/ - Build all files in dir and below' 1562 @echo ' dir/file.[ois] - Build specified target only' 1563 @echo ' dir/file.ll - Build the LLVM assembly file' 1564 @echo ' (requires compiler support for LLVM assembly generation)' 1565 @echo ' dir/file.lst - Build specified mixed source/assembly target only' 1566 @echo ' (requires a recent binutils and recent build (System.map))' 1567 @echo ' dir/file.ko - Build module including final link' 1568 @echo ' modules_prepare - Set up for building external modules' 1569 @echo ' tags/TAGS - Generate tags file for editors' 1570 @echo ' cscope - Generate cscope index' 1571 @echo ' gtags - Generate GNU GLOBAL index' 1572 @echo ' kernelrelease - Output the release version string (use with make -s)' 1573 @echo ' kernelversion - Output the version stored in Makefile (use with make -s)' 1574 @echo ' image_name - Output the image name (use with make -s)' 1575 @echo ' headers_install - Install sanitised kernel headers to INSTALL_HDR_PATH'; \ 1576 echo ' (default: $(INSTALL_HDR_PATH))'; \ 1577 echo '' 1578 @echo 'Static analysers:' 1579 @echo ' checkstack - Generate a list of stack hogs and consider all functions' 1580 @echo ' with a stack size larger than MINSTACKSIZE (default: 100)' 1581 @echo ' versioncheck - Sanity check on version.h usage' 1582 @echo ' includecheck - Check for duplicate included header files' 1583 @echo ' export_report - List the usages of all exported symbols' 1584 @echo ' headerdep - Detect inclusion cycles in headers' 1585 @echo ' coccicheck - Check with Coccinelle' 1586 @echo ' clang-analyzer - Check with clang static analyzer' 1587 @echo ' clang-tidy - Check with clang-tidy' 1588 @echo '' 1589 @echo 'Tools:' 1590 @echo ' nsdeps - Generate missing symbol namespace dependencies' 1591 @echo '' 1592 @echo 'Kernel selftest:' 1593 @echo ' kselftest - Build and run kernel selftest' 1594 @echo ' Build, install, and boot kernel before' 1595 @echo ' running kselftest on it' 1596 @echo ' Run as root for full coverage' 1597 @echo ' kselftest-all - Build kernel selftest' 1598 @echo ' kselftest-install - Build and install kernel selftest' 1599 @echo ' kselftest-clean - Remove all generated kselftest files' 1600 @echo ' kselftest-merge - Merge all the config dependencies of' 1601 @echo ' kselftest to existing .config.' 1602 @echo '' 1603 @echo 'Rust targets:' 1604 @echo ' rustavailable - Checks whether the Rust toolchain is' 1605 @echo ' available and, if not, explains why.' 1606 @echo ' rustfmt - Reformat all the Rust code in the kernel' 1607 @echo ' rustfmtcheck - Checks if all the Rust code in the kernel' 1608 @echo ' is formatted, printing a diff otherwise.' 1609 @echo ' rustdoc - Generate Rust documentation' 1610 @echo ' (requires kernel .config)' 1611 @echo ' rusttest - Runs the Rust tests' 1612 @echo ' (requires kernel .config; downloads external repos)' 1613 @echo ' rust-analyzer - Generate rust-project.json rust-analyzer support file' 1614 @echo ' (requires kernel .config)' 1615 @echo ' dir/file.[os] - Build specified target only' 1616 @echo ' dir/file.rsi - Build macro expanded source, similar to C preprocessing.' 1617 @echo ' Run with RUSTFMT=n to skip reformatting if needed.' 1618 @echo ' The output is not intended to be compilable.' 1619 @echo ' dir/file.ll - Build the LLVM assembly file' 1620 @echo '' 1621 @$(if $(dtstree), \ 1622 echo 'Devicetree:'; \ 1623 echo '* dtbs - Build device tree blobs for enabled boards'; \ 1624 echo ' dtbs_install - Install dtbs to $(INSTALL_DTBS_PATH)'; \ 1625 echo ' dt_binding_check - Validate device tree binding documents'; \ 1626 echo ' dtbs_check - Validate device tree source files';\ 1627 echo '') 1628 1629 @echo 'Userspace tools targets:' 1630 @echo ' use "make tools/help"' 1631 @echo ' or "cd tools; make help"' 1632 @echo '' 1633 @echo 'Kernel packaging:' 1634 @$(MAKE) -f $(srctree)/scripts/Makefile.package help 1635 @echo '' 1636 @echo 'Documentation targets:' 1637 @$(MAKE) -f $(srctree)/Documentation/Makefile dochelp 1638 @echo '' 1639 @echo 'Architecture-specific targets ($(SRCARCH)):' 1640 @$(or $(archhelp),\ 1641 echo ' No architecture-specific help defined for $(SRCARCH)') 1642 @echo '' 1643 @$(if $(boards), \ 1644 $(foreach b, $(boards), \ 1645 printf " %-27s - Build for %s\\n" $(b) $(subst _defconfig,,$(b));) \ 1646 echo '') 1647 @$(if $(board-dirs), \ 1648 $(foreach b, $(board-dirs), \ 1649 printf " %-16s - Show %s-specific targets\\n" help-$(b) $(b);) \ 1650 printf " %-16s - Show all of the above\\n" help-boards; \ 1651 echo '') 1652 1653 @echo ' make V=n [targets] 1: verbose build' 1654 @echo ' 2: give reason for rebuild of target' 1655 @echo ' V=1 and V=2 can be combined with V=12' 1656 @echo ' make O=dir [targets] Locate all output files in "dir", including .config' 1657 @echo ' make C=1 [targets] Check re-compiled c source with $$CHECK' 1658 @echo ' (sparse by default)' 1659 @echo ' make C=2 [targets] Force check of all c source with $$CHECK' 1660 @echo ' make RECORDMCOUNT_WARN=1 [targets] Warn about ignored mcount sections' 1661 @echo ' make W=n [targets] Enable extra build checks, n=1,2,3,c,e where' 1662 @echo ' 1: warnings which may be relevant and do not occur too often' 1663 @echo ' 2: warnings which occur quite often but may still be relevant' 1664 @echo ' 3: more obscure warnings, can most likely be ignored' 1665 @echo ' c: extra checks in the configuration stage (Kconfig)' 1666 @echo ' e: warnings are being treated as errors' 1667 @echo ' Multiple levels can be combined with W=12 or W=123' 1668 @$(if $(dtstree), \ 1669 echo ' make CHECK_DTBS=1 [targets] Check all generated dtb files against schema'; \ 1670 echo ' This can be applied both to "dtbs" and to individual "foo.dtb" targets' ; \ 1671 ) 1672 @echo '' 1673 @echo 'Execute "make" or "make all" to build all targets marked with [*] ' 1674 @echo 'For further info see the ./README file' 1675 1676 1677help-board-dirs := $(addprefix help-,$(board-dirs)) 1678 1679help-boards: $(help-board-dirs) 1680 1681boards-per-dir = $(sort $(notdir $(wildcard $(srctree)/arch/$(SRCARCH)/configs/$*/*_defconfig))) 1682 1683$(help-board-dirs): help-%: 1684 @echo 'Architecture-specific targets ($(SRCARCH) $*):' 1685 @$(if $(boards-per-dir), \ 1686 $(foreach b, $(boards-per-dir), \ 1687 printf " %-24s - Build for %s\\n" $*/$(b) $(subst _defconfig,,$(b));) \ 1688 echo '') 1689 1690 1691# Documentation targets 1692# --------------------------------------------------------------------------- 1693DOC_TARGETS := xmldocs latexdocs pdfdocs htmldocs epubdocs cleandocs \ 1694 linkcheckdocs dochelp refcheckdocs texinfodocs infodocs 1695PHONY += $(DOC_TARGETS) 1696$(DOC_TARGETS): 1697 $(Q)$(MAKE) $(build)=Documentation $@ 1698 1699 1700# Rust targets 1701# --------------------------------------------------------------------------- 1702 1703# "Is Rust available?" target 1704PHONY += rustavailable 1705rustavailable: 1706 $(Q)$(CONFIG_SHELL) $(srctree)/scripts/rust_is_available.sh && echo "Rust is available!" 1707 1708# Documentation target 1709# 1710# Using the singular to avoid running afoul of `no-dot-config-targets`. 1711PHONY += rustdoc 1712rustdoc: prepare 1713 $(Q)$(MAKE) $(build)=rust $@ 1714 1715# Testing target 1716PHONY += rusttest 1717rusttest: prepare 1718 $(Q)$(MAKE) $(build)=rust $@ 1719 1720# Formatting targets 1721PHONY += rustfmt rustfmtcheck 1722 1723# We skip `rust/alloc` since we want to minimize the diff w.r.t. upstream. 1724# 1725# We match using absolute paths since `find` does not resolve them 1726# when matching, which is a problem when e.g. `srctree` is `..`. 1727# We `grep` afterwards in order to remove the directory entry itself. 1728rustfmt: 1729 $(Q)find $(abs_srctree) -type f -name '*.rs' \ 1730 -o -path $(abs_srctree)/rust/alloc -prune \ 1731 -o -path $(abs_objtree)/rust/test -prune \ 1732 | grep -Fv $(abs_srctree)/rust/alloc \ 1733 | grep -Fv $(abs_objtree)/rust/test \ 1734 | grep -Fv generated \ 1735 | xargs $(RUSTFMT) $(rustfmt_flags) 1736 1737rustfmtcheck: rustfmt_flags = --check 1738rustfmtcheck: rustfmt 1739 1740# Misc 1741# --------------------------------------------------------------------------- 1742 1743PHONY += misc-check 1744misc-check: 1745 $(Q)$(srctree)/scripts/misc-check 1746 1747all: misc-check 1748 1749PHONY += scripts_gdb 1750scripts_gdb: prepare0 1751 $(Q)$(MAKE) $(build)=scripts/gdb 1752 $(Q)ln -fsn $(abspath $(srctree)/scripts/gdb/vmlinux-gdb.py) 1753 1754ifdef CONFIG_GDB_SCRIPTS 1755all: scripts_gdb 1756endif 1757 1758else # KBUILD_EXTMOD 1759 1760filechk_kernel.release = echo $(KERNELRELEASE) 1761 1762### 1763# External module support. 1764# When building external modules the kernel used as basis is considered 1765# read-only, and no consistency checks are made and the make 1766# system is not used on the basis kernel. If updates are required 1767# in the basis kernel ordinary make commands (without M=...) must be used. 1768 1769# We are always building only modules. 1770KBUILD_BUILTIN := 1771KBUILD_MODULES := 1 1772 1773build-dir := $(KBUILD_EXTMOD) 1774 1775compile_commands.json: $(extmod_prefix)compile_commands.json 1776PHONY += compile_commands.json 1777 1778clean-dirs := $(KBUILD_EXTMOD) 1779clean: rm-files := $(KBUILD_EXTMOD)/Module.symvers $(KBUILD_EXTMOD)/modules.nsdeps \ 1780 $(KBUILD_EXTMOD)/compile_commands.json $(KBUILD_EXTMOD)/.thinlto-cache 1781 1782PHONY += prepare 1783# now expand this into a simple variable to reduce the cost of shell evaluations 1784prepare: CC_VERSION_TEXT := $(CC_VERSION_TEXT) 1785prepare: 1786 @if [ "$(CC_VERSION_TEXT)" != "$(CONFIG_CC_VERSION_TEXT)" ]; then \ 1787 echo >&2 "warning: the compiler differs from the one used to build the kernel"; \ 1788 echo >&2 " The kernel was built by: $(CONFIG_CC_VERSION_TEXT)"; \ 1789 echo >&2 " You are using: $(CC_VERSION_TEXT)"; \ 1790 fi 1791 1792PHONY += help 1793help: 1794 @echo ' Building external modules.' 1795 @echo ' Syntax: make -C path/to/kernel/src M=$$PWD target' 1796 @echo '' 1797 @echo ' modules - default target, build the module(s)' 1798 @echo ' modules_install - install the module' 1799 @echo ' clean - remove generated files in module directory only' 1800 @echo ' rust-analyzer - generate rust-project.json rust-analyzer support file' 1801 @echo '' 1802 1803ifndef CONFIG_MODULES 1804modules modules_install: __external_modules_error 1805__external_modules_error: 1806 @echo >&2 '***' 1807 @echo >&2 '*** The present kernel disabled CONFIG_MODULES.' 1808 @echo >&2 '*** You cannot build or install external modules.' 1809 @echo >&2 '***' 1810 @false 1811endif 1812 1813endif # KBUILD_EXTMOD 1814 1815# --------------------------------------------------------------------------- 1816# Modules 1817 1818PHONY += modules modules_install modules_sign modules_prepare 1819 1820modules_install: 1821 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modinst \ 1822 sign-only=$(if $(filter modules_install,$(MAKECMDGOALS)),,y) 1823 1824ifeq ($(CONFIG_MODULE_SIG),y) 1825# modules_sign is a subset of modules_install. 1826# 'make modules_install modules_sign' is equivalent to 'make modules_install'. 1827modules_sign: modules_install 1828 @: 1829else 1830modules_sign: 1831 @echo >&2 '***' 1832 @echo >&2 '*** CONFIG_MODULE_SIG is disabled. You cannot sign modules.' 1833 @echo >&2 '***' 1834 @false 1835endif 1836 1837ifdef CONFIG_MODULES 1838 1839$(MODORDER): $(build-dir) 1840 @: 1841 1842# KBUILD_MODPOST_NOFINAL can be set to skip the final link of modules. 1843# This is solely useful to speed up test compiles. 1844modules: modpost 1845ifneq ($(KBUILD_MODPOST_NOFINAL),1) 1846 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modfinal 1847endif 1848 1849PHONY += modules_check 1850modules_check: $(MODORDER) 1851 $(Q)$(CONFIG_SHELL) $(srctree)/scripts/modules-check.sh $< 1852 1853else # CONFIG_MODULES 1854 1855modules: 1856 @: 1857 1858KBUILD_MODULES := 1859 1860endif # CONFIG_MODULES 1861 1862PHONY += modpost 1863modpost: $(if $(single-build),, $(if $(KBUILD_BUILTIN), vmlinux.o)) \ 1864 $(if $(KBUILD_MODULES), modules_check) 1865 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost 1866 1867# Single targets 1868# --------------------------------------------------------------------------- 1869# To build individual files in subdirectories, you can do like this: 1870# 1871# make foo/bar/baz.s 1872# 1873# The supported suffixes for single-target are listed in 'single-targets' 1874# 1875# To build only under specific subdirectories, you can do like this: 1876# 1877# make foo/bar/baz/ 1878 1879ifdef single-build 1880 1881# .ko is special because modpost is needed 1882single-ko := $(sort $(filter %.ko, $(MAKECMDGOALS))) 1883single-no-ko := $(filter-out $(single-ko), $(MAKECMDGOALS)) \ 1884 $(foreach x, o mod, $(patsubst %.ko, %.$x, $(single-ko))) 1885 1886$(single-ko): single_modules 1887 @: 1888$(single-no-ko): $(build-dir) 1889 @: 1890 1891# Remove MODORDER when done because it is not the real one. 1892PHONY += single_modules 1893single_modules: $(single-no-ko) modules_prepare 1894 $(Q){ $(foreach m, $(single-ko), echo $(extmod_prefix)$(m:%.ko=%.o);) } > $(MODORDER) 1895 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost 1896ifneq ($(KBUILD_MODPOST_NOFINAL),1) 1897 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modfinal 1898endif 1899 $(Q)rm -f $(MODORDER) 1900 1901single-goals := $(addprefix $(build-dir)/, $(single-no-ko)) 1902 1903KBUILD_MODULES := 1 1904 1905endif 1906 1907# Preset locale variables to speed up the build process. Limit locale 1908# tweaks to this spot to avoid wrong language settings when running 1909# make menuconfig etc. 1910# Error messages still appears in the original language 1911PHONY += $(build-dir) 1912$(build-dir): prepare 1913 $(Q)$(MAKE) $(build)=$@ need-builtin=1 need-modorder=1 $(single-goals) 1914 1915clean-dirs := $(addprefix _clean_, $(clean-dirs)) 1916PHONY += $(clean-dirs) clean 1917$(clean-dirs): 1918 $(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@) 1919 1920clean: $(clean-dirs) 1921 $(call cmd,rmfiles) 1922 @find $(or $(KBUILD_EXTMOD), .) $(RCS_FIND_IGNORE) \ 1923 \( -name '*.[aios]' -o -name '*.rsi' -o -name '*.ko' -o -name '.*.cmd' \ 1924 -o -name '*.ko.*' \ 1925 -o -name '*.dtb' -o -name '*.dtbo' \ 1926 -o -name '*.dtb.S' -o -name '*.dtbo.S' \ 1927 -o -name '*.dt.yaml' \ 1928 -o -name '*.dwo' -o -name '*.lst' \ 1929 -o -name '*.su' -o -name '*.mod' \ 1930 -o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \ 1931 -o -name '*.lex.c' -o -name '*.tab.[ch]' \ 1932 -o -name '*.asn1.[ch]' \ 1933 -o -name '*.symtypes' -o -name 'modules.order' \ 1934 -o -name '*.c.[012]*.*' \ 1935 -o -name '*.ll' \ 1936 -o -name '*.gcno' \ 1937 -o -name '*.*.symversions' \) -type f -print \ 1938 -o -name '.tmp_*' -print \ 1939 | xargs rm -rf 1940 1941# Generate tags for editors 1942# --------------------------------------------------------------------------- 1943quiet_cmd_tags = GEN $@ 1944 cmd_tags = $(BASH) $(srctree)/scripts/tags.sh $@ 1945 1946tags TAGS cscope gtags: FORCE 1947 $(call cmd,tags) 1948 1949# IDE support targets 1950PHONY += rust-analyzer 1951rust-analyzer: 1952 $(Q)$(MAKE) $(build)=rust $@ 1953 1954# Script to generate missing namespace dependencies 1955# --------------------------------------------------------------------------- 1956 1957PHONY += nsdeps 1958nsdeps: export KBUILD_NSDEPS=1 1959nsdeps: modules 1960 $(Q)$(CONFIG_SHELL) $(srctree)/scripts/nsdeps 1961 1962# Clang Tooling 1963# --------------------------------------------------------------------------- 1964 1965quiet_cmd_gen_compile_commands = GEN $@ 1966 cmd_gen_compile_commands = $(PYTHON3) $< -a $(AR) -o $@ $(filter-out $<, $(real-prereqs)) 1967 1968$(extmod_prefix)compile_commands.json: scripts/clang-tools/gen_compile_commands.py \ 1969 $(if $(KBUILD_EXTMOD),, vmlinux.a $(KBUILD_VMLINUX_LIBS)) \ 1970 $(if $(CONFIG_MODULES), $(MODORDER)) FORCE 1971 $(call if_changed,gen_compile_commands) 1972 1973targets += $(extmod_prefix)compile_commands.json 1974 1975PHONY += clang-tidy clang-analyzer 1976 1977ifdef CONFIG_CC_IS_CLANG 1978quiet_cmd_clang_tools = CHECK $< 1979 cmd_clang_tools = $(PYTHON3) $(srctree)/scripts/clang-tools/run-clang-tools.py $@ $< 1980 1981clang-tidy clang-analyzer: $(extmod_prefix)compile_commands.json 1982 $(call cmd,clang_tools) 1983else 1984clang-tidy clang-analyzer: 1985 @echo "$@ requires CC=clang" >&2 1986 @false 1987endif 1988 1989# Scripts to check various things for consistency 1990# --------------------------------------------------------------------------- 1991 1992PHONY += includecheck versioncheck coccicheck export_report 1993 1994includecheck: 1995 find $(srctree)/* $(RCS_FIND_IGNORE) \ 1996 -name '*.[hcS]' -type f -print | sort \ 1997 | xargs $(PERL) -w $(srctree)/scripts/checkincludes.pl 1998 1999versioncheck: 2000 find $(srctree)/* $(RCS_FIND_IGNORE) \ 2001 -name '*.[hcS]' -type f -print | sort \ 2002 | xargs $(PERL) -w $(srctree)/scripts/checkversion.pl 2003 2004coccicheck: 2005 $(Q)$(BASH) $(srctree)/scripts/$@ 2006 2007export_report: 2008 $(PERL) $(srctree)/scripts/export_report.pl 2009 2010PHONY += checkstack kernelrelease kernelversion image_name 2011 2012# UML needs a little special treatment here. It wants to use the host 2013# toolchain, so needs $(SUBARCH) passed to checkstack.pl. Everyone 2014# else wants $(ARCH), including people doing cross-builds, which means 2015# that $(SUBARCH) doesn't work here. 2016ifeq ($(ARCH), um) 2017CHECKSTACK_ARCH := $(SUBARCH) 2018else 2019CHECKSTACK_ARCH := $(ARCH) 2020endif 2021MINSTACKSIZE ?= 100 2022checkstack: 2023 $(OBJDUMP) -d vmlinux $$(find . -name '*.ko') | \ 2024 $(PERL) $(srctree)/scripts/checkstack.pl $(CHECKSTACK_ARCH) $(MINSTACKSIZE) 2025 2026kernelrelease: 2027 @$(filechk_kernel.release) 2028 2029kernelversion: 2030 @echo $(KERNELVERSION) 2031 2032image_name: 2033 @echo $(KBUILD_IMAGE) 2034 2035PHONY += run-command 2036run-command: 2037 $(Q)$(KBUILD_RUN_COMMAND) 2038 2039quiet_cmd_rmfiles = $(if $(wildcard $(rm-files)),CLEAN $(wildcard $(rm-files))) 2040 cmd_rmfiles = rm -rf $(rm-files) 2041 2042# read saved command lines for existing targets 2043existing-targets := $(wildcard $(sort $(targets))) 2044 2045-include $(foreach f,$(existing-targets),$(dir $(f)).$(notdir $(f)).cmd) 2046 2047endif # config-build 2048endif # mixed-build 2049endif # need-sub-make 2050 2051PHONY += FORCE 2052FORCE: 2053 2054# Declare the contents of the PHONY variable as phony. We keep that 2055# information in a variable so we can use it in if_changed and friends. 2056.PHONY: $(PHONY) 2057