1// SPDX-License-Identifier: GPL-2.0-or-later 2/* 3 * Copyright 2013 Crystalfontz America, Inc. 4 * Free Electrons 5 */ 6 7/* 8 * The CFA-10055 is an expansion board for the CFA-10036 module and 9 * CFA-10037, thus we need to include the CFA-10037 DTS. 10 */ 11#include "imx28-cfa10037.dts" 12 13/ { 14 model = "Crystalfontz CFA-10055 Board"; 15 compatible = "crystalfontz,cfa10055", "crystalfontz,cfa10037", "crystalfontz,cfa10036", "fsl,imx28"; 16 17 spi-2 { 18 compatible = "spi-gpio"; 19 pinctrl-names = "default"; 20 pinctrl-0 = <&spi2_pins_cfa10055>; 21 status = "okay"; 22 sck-gpios = <&gpio2 16 0>; 23 mosi-gpios = <&gpio2 17 0>; 24 miso-gpios = <&gpio2 18 0>; 25 cs-gpios = <&gpio3 5 0>; 26 num-chipselects = <1>; 27 #address-cells = <1>; 28 #size-cells = <0>; 29 30 hx8357: hx8357@0 { 31 compatible = "himax,hx8357b", "himax,hx8357"; 32 reg = <0>; 33 spi-max-frequency = <100000>; 34 spi-cpol; 35 spi-cpha; 36 gpios-reset = <&gpio3 30 0>; 37 }; 38 }; 39 40 backlight { 41 compatible = "pwm-backlight"; 42 pwms = <&pwm 3 5000000>; 43 brightness-levels = <0 4 8 16 32 64 128 255>; 44 default-brightness-level = <6>; 45 }; 46}; 47 48&lcdif { 49 pinctrl-names = "default"; 50 pinctrl-0 = <&lcdif_18bit_pins_cfa10055 51 &lcdif_pins_cfa10055 52 &lcdif_pins_cfa10055_pullup>; 53 display = <&display0>; 54 status = "okay"; 55 56 display0: display0 { 57 bits-per-pixel = <32>; 58 bus-width = <18>; 59 60 display-timings { 61 native-mode = <&timing0>; 62 timing0: timing0 { 63 clock-frequency = <9216000>; 64 hactive = <320>; 65 vactive = <480>; 66 hback-porch = <2>; 67 hfront-porch = <2>; 68 vback-porch = <2>; 69 vfront-porch = <2>; 70 hsync-len = <15>; 71 vsync-len = <15>; 72 hsync-active = <0>; 73 vsync-active = <0>; 74 de-active = <1>; 75 pixelclk-active = <1>; 76 }; 77 }; 78 }; 79}; 80 81&lradc { 82 fsl,lradc-touchscreen-wires = <4>; 83 status = "okay"; 84}; 85 86&pinctrl { 87 spi2_pins_cfa10055: spi2-cfa10055@0 { 88 reg = <0>; 89 fsl,pinmux-ids = < 90 MX28_PAD_SSP2_SCK__GPIO_2_16 91 MX28_PAD_SSP2_MOSI__GPIO_2_17 92 MX28_PAD_SSP2_MISO__GPIO_2_18 93 MX28_PAD_AUART1_TX__GPIO_3_5 94 >; 95 fsl,drive-strength = <MXS_DRIVE_8mA>; 96 fsl,voltage = <MXS_VOLTAGE_HIGH>; 97 fsl,pull-up = <MXS_PULL_ENABLE>; 98 }; 99 100 lcdif_18bit_pins_cfa10055: lcdif-18bit@0 { 101 reg = <0>; 102 fsl,pinmux-ids = < 103 MX28_PAD_LCD_D00__LCD_D0 104 MX28_PAD_LCD_D01__LCD_D1 105 MX28_PAD_LCD_D02__LCD_D2 106 MX28_PAD_LCD_D03__LCD_D3 107 MX28_PAD_LCD_D04__LCD_D4 108 MX28_PAD_LCD_D05__LCD_D5 109 MX28_PAD_LCD_D06__LCD_D6 110 MX28_PAD_LCD_D07__LCD_D7 111 MX28_PAD_LCD_D08__LCD_D8 112 MX28_PAD_LCD_D09__LCD_D9 113 MX28_PAD_LCD_D10__LCD_D10 114 MX28_PAD_LCD_D11__LCD_D11 115 MX28_PAD_LCD_D12__LCD_D12 116 MX28_PAD_LCD_D13__LCD_D13 117 MX28_PAD_LCD_D14__LCD_D14 118 MX28_PAD_LCD_D15__LCD_D15 119 MX28_PAD_LCD_D16__LCD_D16 120 MX28_PAD_LCD_D17__LCD_D17 121 >; 122 fsl,drive-strength = <MXS_DRIVE_4mA>; 123 fsl,voltage = <MXS_VOLTAGE_HIGH>; 124 fsl,pull-up = <MXS_PULL_DISABLE>; 125 }; 126 127 lcdif_pins_cfa10055: lcdif-evk@0 { 128 reg = <0>; 129 fsl,pinmux-ids = < 130 MX28_PAD_LCD_RD_E__LCD_VSYNC 131 MX28_PAD_LCD_WR_RWN__LCD_HSYNC 132 MX28_PAD_LCD_RS__LCD_DOTCLK 133 MX28_PAD_LCD_CS__LCD_ENABLE 134 >; 135 fsl,drive-strength = <MXS_DRIVE_4mA>; 136 fsl,voltage = <MXS_VOLTAGE_HIGH>; 137 fsl,pull-up = <MXS_PULL_DISABLE>; 138 }; 139 140 lcdif_pins_cfa10055_pullup: lcdif-10055-pullup@0 { 141 reg = <0>; 142 fsl,pinmux-ids = < 143 MX28_PAD_LCD_RESET__GPIO_3_30 144 >; 145 fsl,drive-strength = <MXS_DRIVE_4mA>; 146 fsl,voltage = <MXS_VOLTAGE_HIGH>; 147 fsl,pull-up = <MXS_PULL_ENABLE>; 148 }; 149}; 150 151&pwm { 152 pinctrl-names = "default"; 153 pinctrl-0 = <&pwm3_pins_b>; 154 status = "okay"; 155}; 156