xref: /linux/arch/arm/mach-s3c/pm-gpio.c (revision 2da68a77)
1 // SPDX-License-Identifier: GPL-2.0+
2 //
3 // Copyright 2008 Openmoko, Inc.
4 // Copyright 2008 Simtec Electronics
5 //	Ben Dooks <ben@simtec.co.uk>
6 //	http://armlinux.simtec.co.uk/
7 //
8 // S3C series GPIO PM code
9 
10 #include <linux/kernel.h>
11 #include <linux/device.h>
12 #include <linux/init.h>
13 #include <linux/io.h>
14 #include <linux/gpio.h>
15 
16 #include "gpio-samsung.h"
17 
18 #include "gpio-core.h"
19 #include "pm.h"
20 
21 /* PM GPIO helpers */
22 
23 #define OFFS_CON	(0x00)
24 #define OFFS_DAT	(0x04)
25 #define OFFS_UP		(0x08)
26 
27 static void samsung_gpio_pm_1bit_save(struct samsung_gpio_chip *chip)
28 {
29 	chip->pm_save[0] = __raw_readl(chip->base + OFFS_CON);
30 	chip->pm_save[1] = __raw_readl(chip->base + OFFS_DAT);
31 }
32 
33 static void samsung_gpio_pm_1bit_resume(struct samsung_gpio_chip *chip)
34 {
35 	void __iomem *base = chip->base;
36 	u32 old_gpcon = __raw_readl(base + OFFS_CON);
37 	u32 old_gpdat = __raw_readl(base + OFFS_DAT);
38 	u32 gps_gpcon = chip->pm_save[0];
39 	u32 gps_gpdat = chip->pm_save[1];
40 	u32 gpcon;
41 
42 	/* GPACON only has one bit per control / data and no PULLUPs.
43 	 * GPACON[x] = 0 => Output, 1 => SFN */
44 
45 	/* first set all SFN bits to SFN */
46 
47 	gpcon = old_gpcon | gps_gpcon;
48 	__raw_writel(gpcon, base + OFFS_CON);
49 
50 	/* now set all the other bits */
51 
52 	__raw_writel(gps_gpdat, base + OFFS_DAT);
53 	__raw_writel(gps_gpcon, base + OFFS_CON);
54 
55 	S3C_PMDBG("%s: CON %08x => %08x, DAT %08x => %08x\n",
56 		  chip->chip.label, old_gpcon, gps_gpcon, old_gpdat, gps_gpdat);
57 }
58 
59 struct samsung_gpio_pm samsung_gpio_pm_1bit = {
60 	.save	= samsung_gpio_pm_1bit_save,
61 	.resume = samsung_gpio_pm_1bit_resume,
62 };
63 
64 static void samsung_gpio_pm_2bit_save(struct samsung_gpio_chip *chip)
65 {
66 	chip->pm_save[0] = __raw_readl(chip->base + OFFS_CON);
67 	chip->pm_save[1] = __raw_readl(chip->base + OFFS_DAT);
68 	chip->pm_save[2] = __raw_readl(chip->base + OFFS_UP);
69 }
70 
71 /* Test whether the given masked+shifted bits of an GPIO configuration
72  * are one of the SFN (special function) modes. */
73 
74 static inline int is_sfn(unsigned long con)
75 {
76 	return con >= 2;
77 }
78 
79 /* Test if the given masked+shifted GPIO configuration is an input */
80 
81 static inline int is_in(unsigned long con)
82 {
83 	return con == 0;
84 }
85 
86 /* Test if the given masked+shifted GPIO configuration is an output */
87 
88 static inline int is_out(unsigned long con)
89 {
90 	return con == 1;
91 }
92 
93 /**
94  * samsung_gpio_pm_2bit_resume() - restore the given GPIO bank
95  * @chip: The chip information to resume.
96  *
97  * Restore one of the GPIO banks that was saved during suspend. This is
98  * not as simple as once thought, due to the possibility of glitches
99  * from the order that the CON and DAT registers are set in.
100  *
101  * The three states the pin can be are {IN,OUT,SFN} which gives us 9
102  * combinations of changes to check. Three of these, if the pin stays
103  * in the same configuration can be discounted. This leaves us with
104  * the following:
105  *
106  * { IN => OUT }  Change DAT first
107  * { IN => SFN }  Change CON first
108  * { OUT => SFN } Change CON first, so new data will not glitch
109  * { OUT => IN }  Change CON first, so new data will not glitch
110  * { SFN => IN }  Change CON first
111  * { SFN => OUT } Change DAT first, so new data will not glitch [1]
112  *
113  * We do not currently deal with the UP registers as these control
114  * weak resistors, so a small delay in change should not need to bring
115  * these into the calculations.
116  *
117  * [1] this assumes that writing to a pin DAT whilst in SFN will set the
118  *     state for when it is next output.
119  */
120 static void samsung_gpio_pm_2bit_resume(struct samsung_gpio_chip *chip)
121 {
122 	void __iomem *base = chip->base;
123 	u32 old_gpcon = __raw_readl(base + OFFS_CON);
124 	u32 old_gpdat = __raw_readl(base + OFFS_DAT);
125 	u32 gps_gpcon = chip->pm_save[0];
126 	u32 gps_gpdat = chip->pm_save[1];
127 	u32 gpcon, old, new, mask;
128 	u32 change_mask = 0x0;
129 	int nr;
130 
131 	/* restore GPIO pull-up settings */
132 	__raw_writel(chip->pm_save[2], base + OFFS_UP);
133 
134 	/* Create a change_mask of all the items that need to have
135 	 * their CON value changed before their DAT value, so that
136 	 * we minimise the work between the two settings.
137 	 */
138 
139 	for (nr = 0, mask = 0x03; nr < 32; nr += 2, mask <<= 2) {
140 		old = (old_gpcon & mask) >> nr;
141 		new = (gps_gpcon & mask) >> nr;
142 
143 		/* If there is no change, then skip */
144 
145 		if (old == new)
146 			continue;
147 
148 		/* If both are special function, then skip */
149 
150 		if (is_sfn(old) && is_sfn(new))
151 			continue;
152 
153 		/* Change is IN => OUT, do not change now */
154 
155 		if (is_in(old) && is_out(new))
156 			continue;
157 
158 		/* Change is SFN => OUT, do not change now */
159 
160 		if (is_sfn(old) && is_out(new))
161 			continue;
162 
163 		/* We should now be at the case of IN=>SFN,
164 		 * OUT=>SFN, OUT=>IN, SFN=>IN. */
165 
166 		change_mask |= mask;
167 	}
168 
169 
170 	/* Write the new CON settings */
171 
172 	gpcon = old_gpcon & ~change_mask;
173 	gpcon |= gps_gpcon & change_mask;
174 
175 	__raw_writel(gpcon, base + OFFS_CON);
176 
177 	/* Now change any items that require DAT,CON */
178 
179 	__raw_writel(gps_gpdat, base + OFFS_DAT);
180 	__raw_writel(gps_gpcon, base + OFFS_CON);
181 
182 	S3C_PMDBG("%s: CON %08x => %08x, DAT %08x => %08x\n",
183 		  chip->chip.label, old_gpcon, gps_gpcon, old_gpdat, gps_gpdat);
184 }
185 
186 struct samsung_gpio_pm samsung_gpio_pm_2bit = {
187 	.save	= samsung_gpio_pm_2bit_save,
188 	.resume = samsung_gpio_pm_2bit_resume,
189 };
190 
191 #if defined(CONFIG_ARCH_S3C64XX)
192 static void samsung_gpio_pm_4bit_save(struct samsung_gpio_chip *chip)
193 {
194 	chip->pm_save[1] = __raw_readl(chip->base + OFFS_CON);
195 	chip->pm_save[2] = __raw_readl(chip->base + OFFS_DAT);
196 	chip->pm_save[3] = __raw_readl(chip->base + OFFS_UP);
197 
198 	if (chip->chip.ngpio > 8)
199 		chip->pm_save[0] = __raw_readl(chip->base - 4);
200 }
201 
202 static u32 samsung_gpio_pm_4bit_mask(u32 old_gpcon, u32 gps_gpcon)
203 {
204 	u32 old, new, mask;
205 	u32 change_mask = 0x0;
206 	int nr;
207 
208 	for (nr = 0, mask = 0x0f; nr < 16; nr += 4, mask <<= 4) {
209 		old = (old_gpcon & mask) >> nr;
210 		new = (gps_gpcon & mask) >> nr;
211 
212 		/* If there is no change, then skip */
213 
214 		if (old == new)
215 			continue;
216 
217 		/* If both are special function, then skip */
218 
219 		if (is_sfn(old) && is_sfn(new))
220 			continue;
221 
222 		/* Change is IN => OUT, do not change now */
223 
224 		if (is_in(old) && is_out(new))
225 			continue;
226 
227 		/* Change is SFN => OUT, do not change now */
228 
229 		if (is_sfn(old) && is_out(new))
230 			continue;
231 
232 		/* We should now be at the case of IN=>SFN,
233 		 * OUT=>SFN, OUT=>IN, SFN=>IN. */
234 
235 		change_mask |= mask;
236 	}
237 
238 	return change_mask;
239 }
240 
241 static void samsung_gpio_pm_4bit_con(struct samsung_gpio_chip *chip, int index)
242 {
243 	void __iomem *con = chip->base + (index * 4);
244 	u32 old_gpcon = __raw_readl(con);
245 	u32 gps_gpcon = chip->pm_save[index + 1];
246 	u32 gpcon, mask;
247 
248 	mask = samsung_gpio_pm_4bit_mask(old_gpcon, gps_gpcon);
249 
250 	gpcon = old_gpcon & ~mask;
251 	gpcon |= gps_gpcon & mask;
252 
253 	__raw_writel(gpcon, con);
254 }
255 
256 static void samsung_gpio_pm_4bit_resume(struct samsung_gpio_chip *chip)
257 {
258 	void __iomem *base = chip->base;
259 	u32 old_gpcon[2];
260 	u32 old_gpdat = __raw_readl(base + OFFS_DAT);
261 	u32 gps_gpdat = chip->pm_save[2];
262 
263 	/* First, modify the CON settings */
264 
265 	old_gpcon[0] = 0;
266 	old_gpcon[1] = __raw_readl(base + OFFS_CON);
267 
268 	samsung_gpio_pm_4bit_con(chip, 0);
269 	if (chip->chip.ngpio > 8) {
270 		old_gpcon[0] = __raw_readl(base - 4);
271 		samsung_gpio_pm_4bit_con(chip, -1);
272 	}
273 
274 	/* Now change the configurations that require DAT,CON */
275 
276 	__raw_writel(chip->pm_save[2], base + OFFS_DAT);
277 	__raw_writel(chip->pm_save[1], base + OFFS_CON);
278 	if (chip->chip.ngpio > 8)
279 		__raw_writel(chip->pm_save[0], base - 4);
280 
281 	__raw_writel(chip->pm_save[2], base + OFFS_DAT);
282 	__raw_writel(chip->pm_save[3], base + OFFS_UP);
283 
284 	if (chip->chip.ngpio > 8) {
285 		S3C_PMDBG("%s: CON4 %08x,%08x => %08x,%08x, DAT %08x => %08x\n",
286 			  chip->chip.label, old_gpcon[0], old_gpcon[1],
287 			  __raw_readl(base - 4),
288 			  __raw_readl(base + OFFS_CON),
289 			  old_gpdat, gps_gpdat);
290 	} else
291 		S3C_PMDBG("%s: CON4 %08x => %08x, DAT %08x => %08x\n",
292 			  chip->chip.label, old_gpcon[1],
293 			  __raw_readl(base + OFFS_CON),
294 			  old_gpdat, gps_gpdat);
295 }
296 
297 struct samsung_gpio_pm samsung_gpio_pm_4bit = {
298 	.save	= samsung_gpio_pm_4bit_save,
299 	.resume = samsung_gpio_pm_4bit_resume,
300 };
301 #endif /* CONFIG_ARCH_S3C64XX */
302 
303 /**
304  * samsung_pm_save_gpio() - save gpio chip data for suspend
305  * @ourchip: The chip for suspend.
306  */
307 static void samsung_pm_save_gpio(struct samsung_gpio_chip *ourchip)
308 {
309 	struct samsung_gpio_pm *pm = ourchip->pm;
310 
311 	if (pm == NULL || pm->save == NULL)
312 		S3C_PMDBG("%s: no pm for %s\n", __func__, ourchip->chip.label);
313 	else
314 		pm->save(ourchip);
315 }
316 
317 /**
318  * samsung_pm_save_gpios() - Save the state of the GPIO banks.
319  *
320  * For all the GPIO banks, save the state of each one ready for going
321  * into a suspend mode.
322  */
323 void samsung_pm_save_gpios(void)
324 {
325 	struct samsung_gpio_chip *ourchip;
326 	unsigned int gpio_nr;
327 
328 	for (gpio_nr = 0; gpio_nr < S3C_GPIO_END;) {
329 		ourchip = samsung_gpiolib_getchip(gpio_nr);
330 		if (!ourchip) {
331 			gpio_nr++;
332 			continue;
333 		}
334 
335 		samsung_pm_save_gpio(ourchip);
336 
337 		S3C_PMDBG("%s: save %08x,%08x,%08x,%08x\n",
338 			  ourchip->chip.label,
339 			  ourchip->pm_save[0],
340 			  ourchip->pm_save[1],
341 			  ourchip->pm_save[2],
342 			  ourchip->pm_save[3]);
343 
344 		gpio_nr += ourchip->chip.ngpio;
345 		gpio_nr += CONFIG_S3C_GPIO_SPACE;
346 	}
347 }
348 
349 /**
350  * samsung_pm_resume_gpio() - restore gpio chip data after suspend
351  * @ourchip: The suspended chip.
352  */
353 static void samsung_pm_resume_gpio(struct samsung_gpio_chip *ourchip)
354 {
355 	struct samsung_gpio_pm *pm = ourchip->pm;
356 
357 	if (pm == NULL || pm->resume == NULL)
358 		S3C_PMDBG("%s: no pm for %s\n", __func__, ourchip->chip.label);
359 	else
360 		pm->resume(ourchip);
361 }
362 
363 void samsung_pm_restore_gpios(void)
364 {
365 	struct samsung_gpio_chip *ourchip;
366 	unsigned int gpio_nr;
367 
368 	for (gpio_nr = 0; gpio_nr < S3C_GPIO_END;) {
369 		ourchip = samsung_gpiolib_getchip(gpio_nr);
370 		if (!ourchip) {
371 			gpio_nr++;
372 			continue;
373 		}
374 
375 		samsung_pm_resume_gpio(ourchip);
376 
377 		gpio_nr += ourchip->chip.ngpio;
378 		gpio_nr += CONFIG_S3C_GPIO_SPACE;
379 	}
380 }
381