1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2/*
3 * Copyright (c) 2018 BayLibre SAS. All rights reserved.
4 */
5
6/dts-v1/;
7
8#include "meson-g12a.dtsi"
9#include <dt-bindings/gpio/meson-g12a-gpio.h>
10#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
11
12/ {
13	compatible = "radxa,zero", "amlogic,g12a";
14	model = "Radxa Zero";
15
16	aliases {
17		serial0 = &uart_AO;
18	};
19
20	chosen {
21		stdout-path = "serial0:115200n8";
22	};
23
24	memory@0 {
25		device_type = "memory";
26		reg = <0x0 0x0 0x0 0x40000000>;
27	};
28
29	cvbs-connector {
30		status = "disabled";
31		compatible = "composite-video-connector";
32
33		port {
34			cvbs_connector_in: endpoint {
35				remote-endpoint = <&cvbs_vdac_out>;
36			};
37		};
38	};
39
40	hdmi-connector {
41		compatible = "hdmi-connector";
42		type = "a";
43
44		port {
45			hdmi_connector_in: endpoint {
46				remote-endpoint = <&hdmi_tx_tmds_out>;
47			};
48		};
49	};
50
51	emmc_pwrseq: emmc-pwrseq {
52		compatible = "mmc-pwrseq-emmc";
53		reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
54	};
55
56	sdio_pwrseq: sdio-pwrseq {
57		compatible = "mmc-pwrseq-simple";
58		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
59		clocks = <&wifi32k>;
60		clock-names = "ext_clock";
61	};
62
63	ao_5v: regulator-ao_5v {
64		compatible = "regulator-fixed";
65		regulator-name = "AO_5V";
66		regulator-min-microvolt = <5000000>;
67		regulator-max-microvolt = <5000000>;
68		regulator-always-on;
69	};
70
71	vcc_1v8: regulator-vcc_1v8 {
72		compatible = "regulator-fixed";
73		regulator-name = "VCC_1V8";
74		regulator-min-microvolt = <1800000>;
75		regulator-max-microvolt = <1800000>;
76		vin-supply = <&vcc_3v3>;
77		regulator-always-on;
78	};
79
80	vcc_3v3: regulator-vcc_3v3 {
81		compatible = "regulator-fixed";
82		regulator-name = "VCC_3V3";
83		regulator-min-microvolt = <3300000>;
84		regulator-max-microvolt = <3300000>;
85		vin-supply = <&vddao_3v3>;
86		regulator-always-on;
87	};
88
89	hdmi_pw: regulator-hdmi_pw {
90		compatible = "regulator-fixed";
91		regulator-name = "HDMI_PW";
92		regulator-min-microvolt = <5000000>;
93		regulator-max-microvolt = <5000000>;
94		vin-supply = <&ao_5v>;
95		regulator-always-on;
96	};
97
98	vddao_1v8: regulator-vddao_1v8 {
99		compatible = "regulator-fixed";
100		regulator-name = "VDDAO_1V8";
101		regulator-min-microvolt = <1800000>;
102		regulator-max-microvolt = <1800000>;
103		vin-supply = <&vddao_3v3>;
104		regulator-always-on;
105	};
106
107	vddao_3v3: regulator-vddao_3v3 {
108		compatible = "regulator-fixed";
109		regulator-name = "VDDAO_3V3";
110		regulator-min-microvolt = <3300000>;
111		regulator-max-microvolt = <3300000>;
112		vin-supply = <&ao_5v>;
113		regulator-always-on;
114	};
115
116	vddcpu: regulator-vddcpu {
117		compatible = "pwm-regulator";
118
119		regulator-name = "VDDCPU";
120		regulator-min-microvolt = <721000>;
121		regulator-max-microvolt = <1022000>;
122
123		vin-supply = <&ao_5v>;
124
125		pwms = <&pwm_AO_cd 1 1250 0>;
126		pwm-dutycycle-range = <100 0>;
127
128		regulator-boot-on;
129		regulator-always-on;
130	};
131
132	sound {
133		compatible = "amlogic,axg-sound-card";
134		model = "RADXA-ZERO";
135		audio-aux-devs = <&tdmout_b>;
136		audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
137				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
138				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
139				"TDM_B Playback", "TDMOUT_B OUT";
140
141		assigned-clocks = <&clkc CLKID_MPLL2>,
142				  <&clkc CLKID_MPLL0>,
143				  <&clkc CLKID_MPLL1>;
144		assigned-clock-parents = <0>, <0>, <0>;
145		assigned-clock-rates = <294912000>,
146				       <270950400>,
147				       <393216000>;
148
149		dai-link-0 {
150			sound-dai = <&frddr_a>;
151		};
152
153		dai-link-1 {
154			sound-dai = <&frddr_b>;
155		};
156
157		dai-link-2 {
158			sound-dai = <&frddr_c>;
159		};
160
161		/* 8ch hdmi interface */
162		dai-link-3 {
163			sound-dai = <&tdmif_b>;
164			dai-format = "i2s";
165			dai-tdm-slot-tx-mask-0 = <1 1>;
166			dai-tdm-slot-tx-mask-1 = <1 1>;
167			dai-tdm-slot-tx-mask-2 = <1 1>;
168			dai-tdm-slot-tx-mask-3 = <1 1>;
169			mclk-fs = <256>;
170
171			codec {
172				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
173			};
174		};
175
176		dai-link-4 {
177			sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
178
179			codec {
180				sound-dai = <&hdmi_tx>;
181			};
182		};
183	};
184
185	wifi32k: wifi32k {
186		compatible = "pwm-clock";
187		#clock-cells = <0>;
188		clock-frequency = <32768>;
189		pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
190	};
191};
192
193&arb {
194	status = "okay";
195};
196
197&cec_AO {
198	pinctrl-0 = <&cec_ao_a_h_pins>;
199	pinctrl-names = "default";
200	status = "disabled";
201	hdmi-phandle = <&hdmi_tx>;
202};
203
204&cecb_AO {
205	pinctrl-0 = <&cec_ao_b_h_pins>;
206	pinctrl-names = "default";
207	status = "okay";
208	hdmi-phandle = <&hdmi_tx>;
209};
210
211&clkc_audio {
212	status = "okay";
213};
214
215&cpu0 {
216	cpu-supply = <&vddcpu>;
217	operating-points-v2 = <&cpu_opp_table>;
218	clocks = <&clkc CLKID_CPU_CLK>;
219	clock-latency = <50000>;
220};
221
222&cpu1 {
223	cpu-supply = <&vddcpu>;
224	operating-points-v2 = <&cpu_opp_table>;
225	clocks = <&clkc CLKID_CPU_CLK>;
226	clock-latency = <50000>;
227};
228
229&cpu2 {
230	cpu-supply = <&vddcpu>;
231	operating-points-v2 = <&cpu_opp_table>;
232	clocks = <&clkc CLKID_CPU_CLK>;
233	clock-latency = <50000>;
234};
235
236&cpu3 {
237	cpu-supply = <&vddcpu>;
238	operating-points-v2 = <&cpu_opp_table>;
239	clocks = <&clkc CLKID_CPU_CLK>;
240	clock-latency = <50000>;
241};
242
243&cvbs_vdac_port {
244	cvbs_vdac_out: endpoint {
245		remote-endpoint = <&cvbs_connector_in>;
246	};
247};
248
249&frddr_a {
250	status = "okay";
251};
252
253&frddr_b {
254	status = "okay";
255};
256
257&frddr_c {
258	status = "okay";
259};
260
261&hdmi_tx {
262	status = "okay";
263	pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
264	pinctrl-names = "default";
265	hdmi-supply = <&hdmi_pw>;
266};
267
268&hdmi_tx_tmds_port {
269	hdmi_tx_tmds_out: endpoint {
270		remote-endpoint = <&hdmi_connector_in>;
271	};
272};
273
274&ir {
275	status = "disabled";
276	pinctrl-0 = <&remote_input_ao_pins>;
277	pinctrl-names = "default";
278};
279
280&pwm_AO_cd {
281	pinctrl-0 = <&pwm_ao_d_e_pins>;
282	pinctrl-names = "default";
283	clocks = <&xtal>;
284	clock-names = "clkin1";
285	status = "okay";
286};
287
288&pwm_ef {
289	status = "okay";
290	pinctrl-0 = <&pwm_e_pins>;
291	pinctrl-names = "default";
292	clocks = <&xtal>;
293	clock-names = "clkin0";
294};
295
296&saradc {
297	status = "okay";
298	vref-supply = <&vddao_1v8>;
299};
300
301/* SDIO */
302&sd_emmc_a {
303	status = "okay";
304	pinctrl-0 = <&sdio_pins>;
305	pinctrl-1 = <&sdio_clk_gate_pins>;
306	pinctrl-names = "default", "clk-gate";
307	#address-cells = <1>;
308	#size-cells = <0>;
309
310	bus-width = <4>;
311	cap-sd-highspeed;
312	sd-uhs-sdr50;
313	max-frequency = <100000000>;
314
315	non-removable;
316	disable-wp;
317
318	/* WiFi firmware requires power to be kept while in suspend */
319	keep-power-in-suspend;
320
321	mmc-pwrseq = <&sdio_pwrseq>;
322
323	vmmc-supply = <&vddao_3v3>;
324	vqmmc-supply = <&vddao_1v8>;
325
326	brcmf: wifi@1 {
327		reg = <1>;
328		compatible = "brcm,bcm4329-fmac";
329	};
330};
331
332/* SD card */
333&sd_emmc_b {
334	status = "okay";
335	pinctrl-0 = <&sdcard_c_pins>;
336	pinctrl-1 = <&sdcard_clk_gate_c_pins>;
337	pinctrl-names = "default", "clk-gate";
338
339	bus-width = <4>;
340	cap-sd-highspeed;
341	max-frequency = <100000000>;
342	disable-wp;
343
344	cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
345	vmmc-supply = <&vddao_3v3>;
346	vqmmc-supply = <&vddao_3v3>;
347};
348
349/* eMMC */
350&sd_emmc_c {
351	status = "okay";
352	pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
353	pinctrl-1 = <&emmc_clk_gate_pins>;
354	pinctrl-names = "default", "clk-gate";
355
356	bus-width = <8>;
357	cap-mmc-highspeed;
358	mmc-ddr-1_8v;
359	mmc-hs200-1_8v;
360	max-frequency = <200000000>;
361	disable-wp;
362
363	mmc-pwrseq = <&emmc_pwrseq>;
364	vmmc-supply = <&vcc_3v3>;
365	vqmmc-supply = <&vcc_1v8>;
366};
367
368&tdmif_b {
369	status = "okay";
370};
371
372&tdmout_b {
373	status = "okay";
374};
375
376&tohdmitx {
377	status = "okay";
378};
379
380&uart_A {
381	status = "okay";
382	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
383	pinctrl-names = "default";
384	uart-has-rtscts;
385
386	bluetooth {
387		compatible = "brcm,bcm43438-bt";
388		shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
389		max-speed = <2000000>;
390		clocks = <&wifi32k>;
391		clock-names = "lpo";
392	};
393};
394
395&uart_AO {
396	status = "okay";
397	pinctrl-0 = <&uart_ao_a_pins>;
398	pinctrl-names = "default";
399};
400
401&usb {
402	status = "okay";
403};
404