1// SPDX-License-Identifier: (GPL-2.0+ OR MIT) 2/* 3 * Copyright (C) 2019 Marvell International Ltd. 4 * 5 * Device tree for the CN9132-DB board. 6 */ 7 8#include "cn9131-db.dts" 9 10/ { 11 model = "Marvell Armada CN9132-DB"; 12 compatible = "marvell,cn9132", "marvell,cn9131", "marvell,cn9130", 13 "marvell,armada-ap807-quad", "marvell,armada-ap807"; 14 15 aliases { 16 gpio5 = &cp2_gpio1; 17 gpio6 = &cp2_gpio2; 18 ethernet5 = &cp2_eth0; 19 }; 20 21 cp2_reg_usb3_vbus0: cp2_usb3_vbus@0 { 22 compatible = "regulator-fixed"; 23 regulator-name = "cp2-xhci0-vbus"; 24 regulator-min-microvolt = <5000000>; 25 regulator-max-microvolt = <5000000>; 26 enable-active-high; 27 gpio = <&cp2_gpio1 2 GPIO_ACTIVE_HIGH>; 28 }; 29 30 cp2_usb3_0_phy0: cp2_usb3_phy0 { 31 compatible = "usb-nop-xceiv"; 32 vcc-supply = <&cp2_reg_usb3_vbus0>; 33 }; 34 35 cp2_reg_usb3_vbus1: cp2_usb3_vbus@1 { 36 compatible = "regulator-fixed"; 37 regulator-name = "cp2-xhci1-vbus"; 38 regulator-min-microvolt = <5000000>; 39 regulator-max-microvolt = <5000000>; 40 enable-active-high; 41 gpio = <&cp2_gpio1 3 GPIO_ACTIVE_HIGH>; 42 }; 43 44 cp2_usb3_0_phy1: cp2_usb3_phy1 { 45 compatible = "usb-nop-xceiv"; 46 vcc-supply = <&cp2_reg_usb3_vbus1>; 47 }; 48 49 cp2_reg_sd_vccq: cp2_sd_vccq@0 { 50 compatible = "regulator-gpio"; 51 regulator-name = "cp2_sd_vcc"; 52 regulator-min-microvolt = <1800000>; 53 regulator-max-microvolt = <3300000>; 54 gpios = <&cp2_gpio2 17 GPIO_ACTIVE_HIGH>; 55 states = <1800000 0x1 3300000 0x0>; 56 }; 57 58 cp2_sfp_eth0: sfp-eth0 { 59 compatible = "sff,sfp"; 60 i2c-bus = <&cp2_sfpp0_i2c>; 61 los-gpio = <&cp2_module_expander1 11 GPIO_ACTIVE_HIGH>; 62 mod-def0-gpio = <&cp2_module_expander1 10 GPIO_ACTIVE_LOW>; 63 tx-disable-gpio = <&cp2_module_expander1 9 GPIO_ACTIVE_HIGH>; 64 tx-fault-gpio = <&cp2_module_expander1 8 GPIO_ACTIVE_HIGH>; 65 /* 66 * SFP cages are unconnected on early PCBs because of an the I2C 67 * lanes not being connected. Prevent the port for being 68 * unusable by disabling the SFP node. 69 */ 70 status = "disabled"; 71 }; 72}; 73 74/* 75 * Instantiate the second slave CP115 76 */ 77 78#define CP11X_NAME cp2 79#define CP11X_BASE f6000000 80#define CP11X_PCIEx_MEM_BASE(iface) (0xe5000000 + (iface * 0x1000000)) 81#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000 82#define CP11X_PCIE0_BASE f6600000 83#define CP11X_PCIE1_BASE f6620000 84#define CP11X_PCIE2_BASE f6640000 85 86#include "armada-cp115.dtsi" 87 88#undef CP11X_NAME 89#undef CP11X_BASE 90#undef CP11X_PCIEx_MEM_BASE 91#undef CP11X_PCIEx_MEM_SIZE 92#undef CP11X_PCIE0_BASE 93#undef CP11X_PCIE1_BASE 94#undef CP11X_PCIE2_BASE 95 96&cp2_crypto { 97 status = "disabled"; 98}; 99 100&cp2_ethernet { 101 status = "okay"; 102}; 103 104/* SLM-1521-V2, CON9 */ 105&cp2_eth0 { 106 status = "disabled"; 107 phy-mode = "10gbase-kr"; 108 /* Generic PHY, providing serdes lanes */ 109 phys = <&cp2_comphy4 0>; 110 managed = "in-band-status"; 111 sfp = <&cp2_sfp_eth0>; 112}; 113 114&cp2_gpio1 { 115 status = "okay"; 116}; 117 118&cp2_gpio2 { 119 status = "okay"; 120}; 121 122&cp2_i2c0 { 123 clock-frequency = <100000>; 124 125 /* SLM-1521-V2 - U3 */ 126 i2c-mux@72 { 127 compatible = "nxp,pca9544"; 128 #address-cells = <1>; 129 #size-cells = <0>; 130 reg = <0x72>; 131 cp2_sfpp0_i2c: i2c@0 { 132 #address-cells = <1>; 133 #size-cells = <0>; 134 reg = <0>; 135 }; 136 137 i2c@1 { 138 #address-cells = <1>; 139 #size-cells = <0>; 140 reg = <1>; 141 /* U12 */ 142 cp2_module_expander1: pca9555@21 { 143 compatible = "nxp,pca9555"; 144 pinctrl-names = "default"; 145 gpio-controller; 146 #gpio-cells = <2>; 147 reg = <0x21>; 148 }; 149 }; 150 }; 151}; 152 153/* SLM-1521-V2, CON6 */ 154&cp2_pcie0 { 155 status = "okay"; 156 num-lanes = <2>; 157 num-viewport = <8>; 158 /* Generic PHY, providing serdes lanes */ 159 phys = <&cp2_comphy0 0 160 &cp2_comphy1 0>; 161}; 162 163/* SLM-1521-V2, CON8 */ 164&cp2_pcie2 { 165 status = "okay"; 166 num-lanes = <1>; 167 num-viewport = <8>; 168 /* Generic PHY, providing serdes lanes */ 169 phys = <&cp2_comphy5 2>; 170}; 171 172&cp2_sata0 { 173 status = "okay"; 174 175 /* SLM-1521-V2, CON4 */ 176 sata-port@0 { 177 /* Generic PHY, providing serdes lanes */ 178 phys = <&cp2_comphy2 0>; 179 }; 180}; 181 182/* CON 2 on SLM-1683 - microSD */ 183&cp2_sdhci0 { 184 status = "okay"; 185 pinctrl-names = "default"; 186 pinctrl-0 = <&cp2_sdhci_pins>; 187 bus-width = <4>; 188 cd-gpios = <&cp2_gpio2 23 GPIO_ACTIVE_LOW>; 189 vqmmc-supply = <&cp2_reg_sd_vccq>; 190}; 191 192&cp2_syscon0 { 193 cp2_pinctrl: pinctrl { 194 compatible = "marvell,cp115-standalone-pinctrl"; 195 196 cp2_i2c0_pins: cp2-i2c-pins-0 { 197 marvell,pins = "mpp37", "mpp38"; 198 marvell,function = "i2c0"; 199 }; 200 cp2_sdhci_pins: cp2-sdhi-pins-0 { 201 marvell,pins = "mpp56", "mpp57", "mpp58", 202 "mpp59", "mpp60", "mpp61"; 203 marvell,function = "sdio"; 204 }; 205 }; 206}; 207 208&cp2_usb3_0 { 209 status = "okay"; 210 usb-phy = <&cp2_usb3_0_phy0>; 211 phy-names = "usb"; 212}; 213 214/* SLM-1521-V2, CON11 */ 215&cp2_usb3_1 { 216 status = "okay"; 217 usb-phy = <&cp2_usb3_0_phy1>; 218 phy-names = "usb"; 219 /* Generic PHY, providing serdes lanes */ 220 phys = <&cp2_comphy3 1>; 221}; 222