1/*
2 * Copyright (c) 2017 MediaTek Inc.
3 * Author: YT Shen <yt.shen@mediatek.com>
4 *
5 * SPDX-License-Identifier: (GPL-2.0 OR MIT)
6 */
7
8/dts-v1/;
9#include <dt-bindings/gpio/gpio.h>
10#include "mt2712e.dtsi"
11
12/ {
13	model = "MediaTek MT2712 evaluation board";
14	compatible = "mediatek,mt2712-evb", "mediatek,mt2712";
15
16	aliases {
17		serial0 = &uart0;
18	};
19
20	memory@40000000 {
21		device_type = "memory";
22		reg = <0 0x40000000 0 0x80000000>;
23	};
24
25	chosen {
26		stdout-path = "serial0:921600n8";
27	};
28
29	cpus_fixed_vproc0: fixedregulator@0 {
30		compatible = "regulator-fixed";
31		regulator-name = "vproc_buck0";
32		regulator-min-microvolt = <1000000>;
33		regulator-max-microvolt = <1000000>;
34	};
35
36	cpus_fixed_vproc1: fixedregulator@1 {
37		compatible = "regulator-fixed";
38		regulator-name = "vproc_buck1";
39		regulator-min-microvolt = <1000000>;
40		regulator-max-microvolt = <1000000>;
41	};
42
43	extcon_usb: extcon_iddig {
44		compatible = "linux,extcon-usb-gpio";
45		id-gpio = <&pio 12 GPIO_ACTIVE_HIGH>;
46	};
47
48	extcon_usb1: extcon_iddig1 {
49		compatible = "linux,extcon-usb-gpio";
50		id-gpio = <&pio 14 GPIO_ACTIVE_HIGH>;
51	};
52
53	usb_p0_vbus: regulator@2 {
54		compatible = "regulator-fixed";
55		regulator-name = "p0_vbus";
56		regulator-min-microvolt = <5000000>;
57		regulator-max-microvolt = <5000000>;
58		gpio = <&pio 13 GPIO_ACTIVE_HIGH>;
59		enable-active-high;
60	};
61
62	usb_p1_vbus: regulator@3 {
63		compatible = "regulator-fixed";
64		regulator-name = "p1_vbus";
65		regulator-min-microvolt = <5000000>;
66		regulator-max-microvolt = <5000000>;
67		gpio = <&pio 15 GPIO_ACTIVE_HIGH>;
68		enable-active-high;
69	};
70
71	usb_p2_vbus: regulator@4 {
72		compatible = "regulator-fixed";
73		regulator-name = "p2_vbus";
74		regulator-min-microvolt = <5000000>;
75		regulator-max-microvolt = <5000000>;
76		gpio = <&pio 16 GPIO_ACTIVE_HIGH>;
77		enable-active-high;
78	};
79
80	usb_p3_vbus: regulator@5 {
81		compatible = "regulator-fixed";
82		regulator-name = "p3_vbus";
83		regulator-min-microvolt = <5000000>;
84		regulator-max-microvolt = <5000000>;
85		gpio = <&pio 17 GPIO_ACTIVE_HIGH>;
86		enable-active-high;
87		regulator-always-on;
88	};
89
90};
91
92&auxadc {
93	status = "okay";
94};
95
96&cpu0 {
97	proc-supply = <&cpus_fixed_vproc0>;
98};
99
100&cpu1 {
101	proc-supply = <&cpus_fixed_vproc0>;
102};
103
104&cpu2 {
105	proc-supply = <&cpus_fixed_vproc1>;
106};
107
108&eth {
109	phy-mode ="rgmii-rxid";
110	phy-handle = <&ethernet_phy0>;
111	mediatek,tx-delay-ps = <1530>;
112	snps,reset-gpio = <&pio 87 GPIO_ACTIVE_LOW>;
113	snps,reset-delays-us = <0 10000 10000>;
114	pinctrl-names = "default", "sleep";
115	pinctrl-0 = <&eth_default>;
116	pinctrl-1 = <&eth_sleep>;
117	status = "okay";
118
119	mdio {
120		compatible = "snps,dwmac-mdio";
121		#address-cells = <1>;
122		#size-cells = <0>;
123		ethernet_phy0: ethernet-phy@5 {
124			compatible = "ethernet-phy-id0243.0d90";
125			reg = <0x5>;
126		};
127	};
128};
129
130&pio {
131	eth_default: eth_default {
132		tx_pins {
133			pinmux = <MT2712_PIN_71_GBE_TXD3__FUNC_GBE_TXD3>,
134				 <MT2712_PIN_72_GBE_TXD2__FUNC_GBE_TXD2>,
135				 <MT2712_PIN_73_GBE_TXD1__FUNC_GBE_TXD1>,
136				 <MT2712_PIN_74_GBE_TXD0__FUNC_GBE_TXD0>,
137				 <MT2712_PIN_75_GBE_TXC__FUNC_GBE_TXC>,
138				 <MT2712_PIN_76_GBE_TXEN__FUNC_GBE_TXEN>;
139			drive-strength = <MTK_DRIVE_8mA>;
140		};
141		rx_pins {
142			pinmux = <MT2712_PIN_78_GBE_RXD3__FUNC_GBE_RXD3>,
143				 <MT2712_PIN_79_GBE_RXD2__FUNC_GBE_RXD2>,
144				 <MT2712_PIN_80_GBE_RXD1__FUNC_GBE_RXD1>,
145				 <MT2712_PIN_81_GBE_RXD0__FUNC_GBE_RXD0>,
146				 <MT2712_PIN_82_GBE_RXDV__FUNC_GBE_RXDV>,
147				 <MT2712_PIN_84_GBE_RXC__FUNC_GBE_RXC>;
148			input-enable;
149		};
150		mdio_pins {
151			pinmux = <MT2712_PIN_85_GBE_MDC__FUNC_GBE_MDC>,
152				 <MT2712_PIN_86_GBE_MDIO__FUNC_GBE_MDIO>;
153			drive-strength = <MTK_DRIVE_8mA>;
154			input-enable;
155		};
156	};
157
158	eth_sleep: eth_sleep {
159		tx_pins {
160			pinmux = <MT2712_PIN_71_GBE_TXD3__FUNC_GPIO71>,
161				 <MT2712_PIN_72_GBE_TXD2__FUNC_GPIO72>,
162				 <MT2712_PIN_73_GBE_TXD1__FUNC_GPIO73>,
163				 <MT2712_PIN_74_GBE_TXD0__FUNC_GPIO74>,
164				 <MT2712_PIN_75_GBE_TXC__FUNC_GPIO75>,
165				 <MT2712_PIN_76_GBE_TXEN__FUNC_GPIO76>;
166		};
167		rx_pins {
168			pinmux = <MT2712_PIN_78_GBE_RXD3__FUNC_GPIO78>,
169				 <MT2712_PIN_79_GBE_RXD2__FUNC_GPIO79>,
170				 <MT2712_PIN_80_GBE_RXD1__FUNC_GPIO80>,
171				 <MT2712_PIN_81_GBE_RXD0__FUNC_GPIO81>,
172				 <MT2712_PIN_82_GBE_RXDV__FUNC_GPIO82>,
173				 <MT2712_PIN_84_GBE_RXC__FUNC_GPIO84>;
174			input-disable;
175		};
176		mdio_pins {
177			pinmux = <MT2712_PIN_85_GBE_MDC__FUNC_GPIO85>,
178				 <MT2712_PIN_86_GBE_MDIO__FUNC_GPIO86>;
179			input-disable;
180			bias-disable;
181		};
182	};
183
184	usb0_id_pins_float: usb0_iddig {
185		pins_iddig {
186			pinmux = <MT2712_PIN_12_IDDIG_P0__FUNC_IDDIG_A>;
187			bias-pull-up;
188		};
189	};
190
191	usb1_id_pins_float: usb1_iddig {
192		pins_iddig {
193			pinmux = <MT2712_PIN_14_IDDIG_P1__FUNC_IDDIG_B>;
194			bias-pull-up;
195		};
196	};
197};
198
199&ssusb {
200	vbus-supply = <&usb_p0_vbus>;
201	extcon = <&extcon_usb>;
202	dr_mode = "otg";
203	wakeup-source;
204	mediatek,u3p-dis-msk = <0x1>;
205	//enable-manual-drd;
206	//maximum-speed = "full-speed";
207	pinctrl-names = "default";
208	pinctrl-0 = <&usb0_id_pins_float>;
209	status = "okay";
210};
211
212&ssusb1 {
213	vbus-supply = <&usb_p1_vbus>;
214	extcon = <&extcon_usb1>;
215	dr_mode = "otg";
216	//mediatek,u3p-dis-msk = <0x1>;
217	enable-manual-drd;
218	wakeup-source;
219	//maximum-speed = "full-speed";
220	pinctrl-names = "default";
221	pinctrl-0 = <&usb1_id_pins_float>;
222	status = "okay";
223};
224
225&uart0 {
226	status = "okay";
227};
228
229&usb_host0 {
230	vbus-supply = <&usb_p2_vbus>;
231	status = "okay";
232};
233
234&usb_host1 {
235	status = "okay";
236};
237