1// SPDX-License-Identifier: GPL-2.0 2#include <dt-bindings/interrupt-controller/irq.h> 3#include <dt-bindings/spmi/spmi.h> 4#include <dt-bindings/input/linux-event-codes.h> 5 6&spmi_bus { 7 8 pmic@0 { 9 compatible = "qcom,pm8994", "qcom,spmi-pmic"; 10 reg = <0x0 SPMI_USID>; 11 #address-cells = <1>; 12 #size-cells = <0>; 13 14 rtc@6000 { 15 compatible = "qcom,pm8941-rtc"; 16 reg = <0x6000>, <0x6100>; 17 reg-names = "rtc", "alarm"; 18 interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>; 19 }; 20 21 pon@800 { 22 compatible = "qcom,pm8916-pon"; 23 24 reg = <0x800>; 25 mode-bootloader = <0x2>; 26 mode-recovery = <0x1>; 27 28 pwrkey { 29 compatible = "qcom,pm8941-pwrkey"; 30 interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; 31 debounce = <15625>; 32 bias-pull-up; 33 linux,code = <KEY_POWER>; 34 }; 35 36 }; 37 38 pm8994_gpios: gpios@c000 { 39 compatible = "qcom,pm8994-gpio"; 40 reg = <0xc000>; 41 gpio-controller; 42 #gpio-cells = <2>; 43 interrupts = <0 0xc0 0 IRQ_TYPE_NONE>, 44 <0 0xc1 0 IRQ_TYPE_NONE>, 45 <0 0xc2 0 IRQ_TYPE_NONE>, 46 <0 0xc3 0 IRQ_TYPE_NONE>, 47 <0 0xc4 0 IRQ_TYPE_NONE>, 48 <0 0xc5 0 IRQ_TYPE_NONE>, 49 <0 0xc6 0 IRQ_TYPE_NONE>, 50 <0 0xc7 0 IRQ_TYPE_NONE>, 51 <0 0xc8 0 IRQ_TYPE_NONE>, 52 <0 0xc9 0 IRQ_TYPE_NONE>, 53 <0 0xca 0 IRQ_TYPE_NONE>, 54 <0 0xcb 0 IRQ_TYPE_NONE>, 55 <0 0xcc 0 IRQ_TYPE_NONE>, 56 <0 0xcd 0 IRQ_TYPE_NONE>, 57 <0 0xce 0 IRQ_TYPE_NONE>, 58 <0 0xcf 0 IRQ_TYPE_NONE>, 59 <0 0xd0 0 IRQ_TYPE_NONE>, 60 <0 0xd1 0 IRQ_TYPE_NONE>, 61 <0 0xd2 0 IRQ_TYPE_NONE>, 62 <0 0xd3 0 IRQ_TYPE_NONE>, 63 <0 0xd4 0 IRQ_TYPE_NONE>, 64 <0 0xd5 0 IRQ_TYPE_NONE>; 65 }; 66 67 pm8994_mpps: mpps@a000 { 68 compatible = "qcom,pm8994-mpp"; 69 reg = <0xa000>; 70 gpio-controller; 71 #gpio-cells = <2>; 72 interrupts = <0 0xa0 0 IRQ_TYPE_NONE>, 73 <0 0xa1 0 IRQ_TYPE_NONE>, 74 <0 0xa2 0 IRQ_TYPE_NONE>, 75 <0 0xa3 0 IRQ_TYPE_NONE>, 76 <0 0xa4 0 IRQ_TYPE_NONE>, 77 <0 0xa5 0 IRQ_TYPE_NONE>, 78 <0 0xa6 0 IRQ_TYPE_NONE>, 79 <0 0xa7 0 IRQ_TYPE_NONE>; 80 }; 81 }; 82 83 pmic@1 { 84 compatible = "qcom,pm8994", "qcom,spmi-pmic"; 85 reg = <0x1 SPMI_USID>; 86 #address-cells = <1>; 87 #size-cells = <0>; 88 89 pm8994_spmi_regulators: regulators { 90 compatible = "qcom,pm8994-regulators"; 91 }; 92 }; 93}; 94