1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2
3/dts-v1/;
4
5#include <dt-bindings/gpio/gpio.h>
6#include <dt-bindings/input/linux-event-codes.h>
7#include <dt-bindings/pinctrl/rockchip.h>
8#include "rk3566-powkiddy-rk2023.dtsi"
9
10/ {
11	model = "Powkiddy RGB10MAX3";
12	compatible = "powkiddy,rgb10max3", "rockchip,rk3566";
13};
14
15&bluetooth {
16	compatible = "realtek,rtl8723ds-bt";
17};
18
19&cru {
20	assigned-clocks = <&pmucru CLK_RTC_32K>, <&cru PLL_GPLL>,
21			  <&pmucru PLL_PPLL>, <&cru PLL_VPLL>;
22	assigned-clock-rates = <32768>, <1200000000>,
23			       <200000000>, <126400000>;
24};
25
26&dsi0 {
27	panel: panel@0 {
28		compatible = "powkiddy,rgb10max3-panel";
29		reg = <0>;
30		backlight = <&backlight>;
31		iovcc-supply = <&vcc3v3_lcd0_n>;
32		pinctrl-0 = <&lcd_rst>;
33		pinctrl-names = "default";
34		reset-gpios = <&gpio4 RK_PA0 GPIO_ACTIVE_LOW>;
35		rotation = <270>;
36		vcc-supply = <&vcc3v3_lcd0_n>;
37
38		port {
39			mipi_in_panel: endpoint {
40				remote-endpoint = <&mipi_out_panel>;
41			};
42		};
43	};
44};
45
46&green_led {
47	default-state = "on";
48	function = LED_FUNCTION_POWER;
49};
50
51&i2c0 {
52	vdd_cpu: regulator@40 {
53		compatible = "fcs,fan53555";
54		reg = <0x40>;
55		fcs,suspend-voltage-selector = <1>;
56		regulator-always-on;
57		regulator-boot-on;
58		regulator-min-microvolt = <712500>;
59		regulator-max-microvolt = <1390000>;
60		regulator-name = "vdd_cpu";
61		regulator-ramp-delay = <2300>;
62		vin-supply = <&vcc_sys>;
63		regulator-state-mem {
64			regulator-off-in-suspend;
65		};
66	};
67};
68
69&leds {
70	amber_led: led-2 {
71		color = <LED_COLOR_ID_AMBER>;
72		function = LED_FUNCTION_CHARGING;
73		max-brightness = <255>;
74		pwms = <&pwm0 0 25000 0>;
75	};
76};
77
78&pwm0 {
79	pinctrl-0 = <&pwm0m1_pins>;
80	pinctrl-names = "default";
81	status = "okay";
82};
83
84&red_led {
85	default-state = "off";
86	function = LED_FUNCTION_STATUS;
87};
88