xref: /linux/arch/arm64/include/asm/asm-uaccess.h (revision 6c8c1406)
1 /* SPDX-License-Identifier: GPL-2.0 */
2 #ifndef __ASM_ASM_UACCESS_H
3 #define __ASM_ASM_UACCESS_H
4 
5 #include <asm/alternative-macros.h>
6 #include <asm/asm-extable.h>
7 #include <asm/assembler.h>
8 #include <asm/kernel-pgtable.h>
9 #include <asm/mmu.h>
10 #include <asm/sysreg.h>
11 
12 /*
13  * User access enabling/disabling macros.
14  */
15 #ifdef CONFIG_ARM64_SW_TTBR0_PAN
16 	.macro	__uaccess_ttbr0_disable, tmp1
17 	mrs	\tmp1, ttbr1_el1			// swapper_pg_dir
18 	bic	\tmp1, \tmp1, #TTBR_ASID_MASK
19 	sub	\tmp1, \tmp1, #RESERVED_SWAPPER_OFFSET	// reserved_pg_dir
20 	msr	ttbr0_el1, \tmp1			// set reserved TTBR0_EL1
21 	isb
22 	add	\tmp1, \tmp1, #RESERVED_SWAPPER_OFFSET
23 	msr	ttbr1_el1, \tmp1		// set reserved ASID
24 	isb
25 	.endm
26 
27 	.macro	__uaccess_ttbr0_enable, tmp1, tmp2
28 	get_current_task \tmp1
29 	ldr	\tmp1, [\tmp1, #TSK_TI_TTBR0]	// load saved TTBR0_EL1
30 	mrs	\tmp2, ttbr1_el1
31 	extr    \tmp2, \tmp2, \tmp1, #48
32 	ror     \tmp2, \tmp2, #16
33 	msr	ttbr1_el1, \tmp2		// set the active ASID
34 	isb
35 	msr	ttbr0_el1, \tmp1		// set the non-PAN TTBR0_EL1
36 	isb
37 	.endm
38 
39 	.macro	uaccess_ttbr0_disable, tmp1, tmp2
40 alternative_if_not ARM64_HAS_PAN
41 	save_and_disable_irq \tmp2		// avoid preemption
42 	__uaccess_ttbr0_disable \tmp1
43 	restore_irq \tmp2
44 alternative_else_nop_endif
45 	.endm
46 
47 	.macro	uaccess_ttbr0_enable, tmp1, tmp2, tmp3
48 alternative_if_not ARM64_HAS_PAN
49 	save_and_disable_irq \tmp3		// avoid preemption
50 	__uaccess_ttbr0_enable \tmp1, \tmp2
51 	restore_irq \tmp3
52 alternative_else_nop_endif
53 	.endm
54 #else
55 	.macro	uaccess_ttbr0_disable, tmp1, tmp2
56 	.endm
57 
58 	.macro	uaccess_ttbr0_enable, tmp1, tmp2, tmp3
59 	.endm
60 #endif
61 
62 #define USER(l, x...)				\
63 9999:	x;					\
64 	_asm_extable_uaccess	9999b, l
65 
66 /*
67  * Generate the assembly for LDTR/STTR with exception table entries.
68  * This is complicated as there is no post-increment or pair versions of the
69  * unprivileged instructions, and USER() only works for single instructions.
70  */
71 	.macro user_ldp l, reg1, reg2, addr, post_inc
72 8888:		ldtr	\reg1, [\addr];
73 8889:		ldtr	\reg2, [\addr, #8];
74 		add	\addr, \addr, \post_inc;
75 
76 		_asm_extable_uaccess	8888b, \l;
77 		_asm_extable_uaccess	8889b, \l;
78 	.endm
79 
80 	.macro user_stp l, reg1, reg2, addr, post_inc
81 8888:		sttr	\reg1, [\addr];
82 8889:		sttr	\reg2, [\addr, #8];
83 		add	\addr, \addr, \post_inc;
84 
85 		_asm_extable_uaccess	8888b,\l;
86 		_asm_extable_uaccess	8889b,\l;
87 	.endm
88 
89 	.macro user_ldst l, inst, reg, addr, post_inc
90 8888:		\inst		\reg, [\addr];
91 		add		\addr, \addr, \post_inc;
92 
93 		_asm_extable_uaccess	8888b, \l;
94 	.endm
95 #endif
96