xref: /linux/arch/powerpc/kernel/crash_dump.c (revision 44f57d78)
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * Routines for doing kexec-based kdump.
4  *
5  * Copyright (C) 2005, IBM Corp.
6  *
7  * Created by: Michael Ellerman
8  */
9 
10 #undef DEBUG
11 
12 #include <linux/crash_dump.h>
13 #include <linux/io.h>
14 #include <linux/memblock.h>
15 #include <asm/code-patching.h>
16 #include <asm/kdump.h>
17 #include <asm/prom.h>
18 #include <asm/firmware.h>
19 #include <linux/uaccess.h>
20 #include <asm/rtas.h>
21 
22 #ifdef DEBUG
23 #include <asm/udbg.h>
24 #define DBG(fmt...) udbg_printf(fmt)
25 #else
26 #define DBG(fmt...)
27 #endif
28 
29 #ifndef CONFIG_NONSTATIC_KERNEL
30 void __init reserve_kdump_trampoline(void)
31 {
32 	memblock_reserve(0, KDUMP_RESERVE_LIMIT);
33 }
34 
35 static void __init create_trampoline(unsigned long addr)
36 {
37 	unsigned int *p = (unsigned int *)addr;
38 
39 	/* The maximum range of a single instruction branch, is the current
40 	 * instruction's address + (32 MB - 4) bytes. For the trampoline we
41 	 * need to branch to current address + 32 MB. So we insert a nop at
42 	 * the trampoline address, then the next instruction (+ 4 bytes)
43 	 * does a branch to (32 MB - 4). The net effect is that when we
44 	 * branch to "addr" we jump to ("addr" + 32 MB). Although it requires
45 	 * two instructions it doesn't require any registers.
46 	 */
47 	patch_instruction(p, PPC_INST_NOP);
48 	patch_branch(++p, addr + PHYSICAL_START, 0);
49 }
50 
51 void __init setup_kdump_trampoline(void)
52 {
53 	unsigned long i;
54 
55 	DBG(" -> setup_kdump_trampoline()\n");
56 
57 	for (i = KDUMP_TRAMPOLINE_START; i < KDUMP_TRAMPOLINE_END; i += 8) {
58 		create_trampoline(i);
59 	}
60 
61 #ifdef CONFIG_PPC_PSERIES
62 	create_trampoline(__pa(system_reset_fwnmi) - PHYSICAL_START);
63 	create_trampoline(__pa(machine_check_fwnmi) - PHYSICAL_START);
64 #endif /* CONFIG_PPC_PSERIES */
65 
66 	DBG(" <- setup_kdump_trampoline()\n");
67 }
68 #endif /* CONFIG_NONSTATIC_KERNEL */
69 
70 static size_t copy_oldmem_vaddr(void *vaddr, char *buf, size_t csize,
71                                unsigned long offset, int userbuf)
72 {
73 	if (userbuf) {
74 		if (copy_to_user((char __user *)buf, (vaddr + offset), csize))
75 			return -EFAULT;
76 	} else
77 		memcpy(buf, (vaddr + offset), csize);
78 
79 	return csize;
80 }
81 
82 /**
83  * copy_oldmem_page - copy one page from "oldmem"
84  * @pfn: page frame number to be copied
85  * @buf: target memory address for the copy; this can be in kernel address
86  *      space or user address space (see @userbuf)
87  * @csize: number of bytes to copy
88  * @offset: offset in bytes into the page (based on pfn) to begin the copy
89  * @userbuf: if set, @buf is in user address space, use copy_to_user(),
90  *      otherwise @buf is in kernel address space, use memcpy().
91  *
92  * Copy a page from "oldmem". For this page, there is no pte mapped
93  * in the current kernel. We stitch up a pte, similar to kmap_atomic.
94  */
95 ssize_t copy_oldmem_page(unsigned long pfn, char *buf,
96 			size_t csize, unsigned long offset, int userbuf)
97 {
98 	void  *vaddr;
99 	phys_addr_t paddr;
100 
101 	if (!csize)
102 		return 0;
103 
104 	csize = min_t(size_t, csize, PAGE_SIZE);
105 	paddr = pfn << PAGE_SHIFT;
106 
107 	if (memblock_is_region_memory(paddr, csize)) {
108 		vaddr = __va(paddr);
109 		csize = copy_oldmem_vaddr(vaddr, buf, csize, offset, userbuf);
110 	} else {
111 		vaddr = ioremap_cache(paddr, PAGE_SIZE);
112 		csize = copy_oldmem_vaddr(vaddr, buf, csize, offset, userbuf);
113 		iounmap(vaddr);
114 	}
115 
116 	return csize;
117 }
118 
119 #ifdef CONFIG_PPC_RTAS
120 /*
121  * The crashkernel region will almost always overlap the RTAS region, so
122  * we have to be careful when shrinking the crashkernel region.
123  */
124 void crash_free_reserved_phys_range(unsigned long begin, unsigned long end)
125 {
126 	unsigned long addr;
127 	const __be32 *basep, *sizep;
128 	unsigned int rtas_start = 0, rtas_end = 0;
129 
130 	basep = of_get_property(rtas.dev, "linux,rtas-base", NULL);
131 	sizep = of_get_property(rtas.dev, "rtas-size", NULL);
132 
133 	if (basep && sizep) {
134 		rtas_start = be32_to_cpup(basep);
135 		rtas_end = rtas_start + be32_to_cpup(sizep);
136 	}
137 
138 	for (addr = begin; addr < end; addr += PAGE_SIZE) {
139 		/* Does this page overlap with the RTAS region? */
140 		if (addr <= rtas_end && ((addr + PAGE_SIZE) > rtas_start))
141 			continue;
142 
143 		free_reserved_page(pfn_to_page(addr >> PAGE_SHIFT));
144 	}
145 }
146 #endif
147