1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  * arch/powerpc/platforms/83xx/mpc832x_rdb.c
4  *
5  * Copyright (C) Freescale Semiconductor, Inc. 2007. All rights reserved.
6  *
7  * Description:
8  * MPC832x RDB board specific routines.
9  * This file is based on mpc832x_mds.c and mpc8313_rdb.c
10  * Author: Michael Barkowski <michael.barkowski@freescale.com>
11  */
12 
13 #include <linux/pci.h>
14 #include <linux/interrupt.h>
15 #include <linux/spi/spi.h>
16 #include <linux/spi/mmc_spi.h>
17 #include <linux/mmc/host.h>
18 #include <linux/of_platform.h>
19 #include <linux/fsl_devices.h>
20 
21 #include <asm/time.h>
22 #include <asm/ipic.h>
23 #include <asm/udbg.h>
24 #include <soc/fsl/qe/qe.h>
25 #include <sysdev/fsl_soc.h>
26 #include <sysdev/fsl_pci.h>
27 
28 #include "mpc83xx.h"
29 
30 #undef DEBUG
31 #ifdef DEBUG
32 #define DBG(fmt...) udbg_printf(fmt)
33 #else
34 #define DBG(fmt...)
35 #endif
36 
37 #ifdef CONFIG_QUICC_ENGINE
38 static int __init of_fsl_spi_probe(char *type, char *compatible, u32 sysclk,
39 				   struct spi_board_info *board_infos,
40 				   unsigned int num_board_infos,
41 				   void (*cs_control)(struct spi_device *dev,
42 						      bool on))
43 {
44 	struct device_node *np;
45 	unsigned int i = 0;
46 
47 	for_each_compatible_node(np, type, compatible) {
48 		int ret;
49 		unsigned int j;
50 		const void *prop;
51 		struct resource res[2];
52 		struct platform_device *pdev;
53 		struct fsl_spi_platform_data pdata = {
54 			.cs_control = cs_control,
55 		};
56 
57 		memset(res, 0, sizeof(res));
58 
59 		pdata.sysclk = sysclk;
60 
61 		prop = of_get_property(np, "reg", NULL);
62 		if (!prop)
63 			goto err;
64 		pdata.bus_num = *(u32 *)prop;
65 
66 		prop = of_get_property(np, "cell-index", NULL);
67 		if (prop)
68 			i = *(u32 *)prop;
69 
70 		prop = of_get_property(np, "mode", NULL);
71 		if (prop && !strcmp(prop, "cpu-qe"))
72 			pdata.flags = SPI_QE_CPU_MODE;
73 
74 		for (j = 0; j < num_board_infos; j++) {
75 			if (board_infos[j].bus_num == pdata.bus_num)
76 				pdata.max_chipselect++;
77 		}
78 
79 		if (!pdata.max_chipselect)
80 			continue;
81 
82 		ret = of_address_to_resource(np, 0, &res[0]);
83 		if (ret)
84 			goto err;
85 
86 		ret = of_irq_to_resource(np, 0, &res[1]);
87 		if (ret <= 0)
88 			goto err;
89 
90 		pdev = platform_device_alloc("mpc83xx_spi", i);
91 		if (!pdev)
92 			goto err;
93 
94 		ret = platform_device_add_data(pdev, &pdata, sizeof(pdata));
95 		if (ret)
96 			goto unreg;
97 
98 		ret = platform_device_add_resources(pdev, res,
99 						    ARRAY_SIZE(res));
100 		if (ret)
101 			goto unreg;
102 
103 		ret = platform_device_add(pdev);
104 		if (ret)
105 			goto unreg;
106 
107 		goto next;
108 unreg:
109 		platform_device_del(pdev);
110 err:
111 		pr_err("%pOF: registration failed\n", np);
112 next:
113 		i++;
114 	}
115 
116 	return i;
117 }
118 
119 static int __init fsl_spi_init(struct spi_board_info *board_infos,
120 			       unsigned int num_board_infos,
121 			       void (*cs_control)(struct spi_device *spi,
122 						  bool on))
123 {
124 	u32 sysclk = -1;
125 	int ret;
126 
127 	/* SPI controller is either clocked from QE or SoC clock */
128 	sysclk = get_brgfreq();
129 	if (sysclk == -1) {
130 		sysclk = fsl_get_sys_freq();
131 		if (sysclk == -1)
132 			return -ENODEV;
133 	}
134 
135 	ret = of_fsl_spi_probe(NULL, "fsl,spi", sysclk, board_infos,
136 			       num_board_infos, cs_control);
137 	if (!ret)
138 		of_fsl_spi_probe("spi", "fsl_spi", sysclk, board_infos,
139 				 num_board_infos, cs_control);
140 
141 	return spi_register_board_info(board_infos, num_board_infos);
142 }
143 
144 static void mpc83xx_spi_cs_control(struct spi_device *spi, bool on)
145 {
146 	pr_debug("%s %d %d\n", __func__, spi->chip_select, on);
147 	par_io_data_set(3, 13, on);
148 }
149 
150 static struct mmc_spi_platform_data mpc832x_mmc_pdata = {
151 	.ocr_mask = MMC_VDD_33_34,
152 };
153 
154 static struct spi_board_info mpc832x_spi_boardinfo = {
155 	.bus_num = 0x4c0,
156 	.chip_select = 0,
157 	.max_speed_hz = 50000000,
158 	.modalias = "mmc_spi",
159 	.platform_data = &mpc832x_mmc_pdata,
160 };
161 
162 static int __init mpc832x_spi_init(void)
163 {
164 	par_io_config_pin(3,  0, 3, 0, 1, 0); /* SPI1 MOSI, I/O */
165 	par_io_config_pin(3,  1, 3, 0, 1, 0); /* SPI1 MISO, I/O */
166 	par_io_config_pin(3,  2, 3, 0, 1, 0); /* SPI1 CLK,  I/O */
167 	par_io_config_pin(3,  3, 2, 0, 1, 0); /* SPI1 SEL,  I   */
168 
169 	par_io_config_pin(3, 13, 1, 0, 0, 0); /* !SD_CS,    O */
170 	par_io_config_pin(3, 14, 2, 0, 0, 0); /* SD_INSERT, I */
171 	par_io_config_pin(3, 15, 2, 0, 0, 0); /* SD_PROTECT,I */
172 
173 	/*
174 	 * Don't bother with legacy stuff when device tree contains
175 	 * mmc-spi-slot node.
176 	 */
177 	if (of_find_compatible_node(NULL, NULL, "mmc-spi-slot"))
178 		return 0;
179 	return fsl_spi_init(&mpc832x_spi_boardinfo, 1, mpc83xx_spi_cs_control);
180 }
181 machine_device_initcall(mpc832x_rdb, mpc832x_spi_init);
182 #endif /* CONFIG_QUICC_ENGINE */
183 
184 /* ************************************************************************
185  *
186  * Setup the architecture
187  *
188  */
189 static void __init mpc832x_rdb_setup_arch(void)
190 {
191 #if defined(CONFIG_QUICC_ENGINE)
192 	struct device_node *np;
193 #endif
194 
195 	mpc83xx_setup_arch();
196 
197 #ifdef CONFIG_QUICC_ENGINE
198 	if ((np = of_find_node_by_name(NULL, "par_io")) != NULL) {
199 		par_io_init(np);
200 		of_node_put(np);
201 
202 		for_each_node_by_name(np, "ucc")
203 			par_io_of_config(np);
204 	}
205 #endif				/* CONFIG_QUICC_ENGINE */
206 }
207 
208 machine_device_initcall(mpc832x_rdb, mpc83xx_declare_of_platform_devices);
209 
210 /*
211  * Called very early, MMU is off, device-tree isn't unflattened
212  */
213 static int __init mpc832x_rdb_probe(void)
214 {
215 	return of_machine_is_compatible("MPC832xRDB");
216 }
217 
218 define_machine(mpc832x_rdb) {
219 	.name		= "MPC832x RDB",
220 	.probe		= mpc832x_rdb_probe,
221 	.setup_arch	= mpc832x_rdb_setup_arch,
222 	.init_IRQ	= mpc83xx_ipic_init_IRQ,
223 	.get_irq	= ipic_get_irq,
224 	.restart	= mpc83xx_restart,
225 	.time_init	= mpc83xx_time_init,
226 	.calibrate_decr	= generic_calibrate_decr,
227 	.progress	= udbg_progress,
228 };
229