1 // SPDX-License-Identifier: GPL-2.0-only 2 #include <linux/export.h> 3 #include <linux/bitops.h> 4 #include <linux/elf.h> 5 #include <linux/mm.h> 6 7 #include <linux/io.h> 8 #include <linux/sched.h> 9 #include <linux/sched/clock.h> 10 #include <linux/random.h> 11 #include <linux/topology.h> 12 #include <asm/processor.h> 13 #include <asm/apic.h> 14 #include <asm/cacheinfo.h> 15 #include <asm/cpu.h> 16 #include <asm/spec-ctrl.h> 17 #include <asm/smp.h> 18 #include <asm/numa.h> 19 #include <asm/pci-direct.h> 20 #include <asm/delay.h> 21 #include <asm/debugreg.h> 22 #include <asm/resctrl.h> 23 24 #ifdef CONFIG_X86_64 25 # include <asm/mmconfig.h> 26 #endif 27 28 #include "cpu.h" 29 30 /* 31 * nodes_per_socket: Stores the number of nodes per socket. 32 * Refer to Fam15h Models 00-0fh BKDG - CPUID Fn8000_001E_ECX 33 * Node Identifiers[10:8] 34 */ 35 static u32 nodes_per_socket = 1; 36 37 /* 38 * AMD errata checking 39 * 40 * Errata are defined as arrays of ints using the AMD_LEGACY_ERRATUM() or 41 * AMD_OSVW_ERRATUM() macros. The latter is intended for newer errata that 42 * have an OSVW id assigned, which it takes as first argument. Both take a 43 * variable number of family-specific model-stepping ranges created by 44 * AMD_MODEL_RANGE(). 45 * 46 * Example: 47 * 48 * const int amd_erratum_319[] = 49 * AMD_LEGACY_ERRATUM(AMD_MODEL_RANGE(0x10, 0x2, 0x1, 0x4, 0x2), 50 * AMD_MODEL_RANGE(0x10, 0x8, 0x0, 0x8, 0x0), 51 * AMD_MODEL_RANGE(0x10, 0x9, 0x0, 0x9, 0x0)); 52 */ 53 54 #define AMD_LEGACY_ERRATUM(...) { -1, __VA_ARGS__, 0 } 55 #define AMD_OSVW_ERRATUM(osvw_id, ...) { osvw_id, __VA_ARGS__, 0 } 56 #define AMD_MODEL_RANGE(f, m_start, s_start, m_end, s_end) \ 57 ((f << 24) | (m_start << 16) | (s_start << 12) | (m_end << 4) | (s_end)) 58 #define AMD_MODEL_RANGE_FAMILY(range) (((range) >> 24) & 0xff) 59 #define AMD_MODEL_RANGE_START(range) (((range) >> 12) & 0xfff) 60 #define AMD_MODEL_RANGE_END(range) ((range) & 0xfff) 61 62 static const int amd_erratum_400[] = 63 AMD_OSVW_ERRATUM(1, AMD_MODEL_RANGE(0xf, 0x41, 0x2, 0xff, 0xf), 64 AMD_MODEL_RANGE(0x10, 0x2, 0x1, 0xff, 0xf)); 65 66 static const int amd_erratum_383[] = 67 AMD_OSVW_ERRATUM(3, AMD_MODEL_RANGE(0x10, 0, 0, 0xff, 0xf)); 68 69 /* #1054: Instructions Retired Performance Counter May Be Inaccurate */ 70 static const int amd_erratum_1054[] = 71 AMD_LEGACY_ERRATUM(AMD_MODEL_RANGE(0x17, 0, 0, 0x2f, 0xf)); 72 73 static const int amd_zenbleed[] = 74 AMD_LEGACY_ERRATUM(AMD_MODEL_RANGE(0x17, 0x30, 0x0, 0x4f, 0xf), 75 AMD_MODEL_RANGE(0x17, 0x60, 0x0, 0x7f, 0xf), 76 AMD_MODEL_RANGE(0x17, 0x90, 0x0, 0x91, 0xf), 77 AMD_MODEL_RANGE(0x17, 0xa0, 0x0, 0xaf, 0xf)); 78 79 static const int amd_div0[] = 80 AMD_LEGACY_ERRATUM(AMD_MODEL_RANGE(0x17, 0x00, 0x0, 0x2f, 0xf), 81 AMD_MODEL_RANGE(0x17, 0x50, 0x0, 0x5f, 0xf)); 82 83 static bool cpu_has_amd_erratum(struct cpuinfo_x86 *cpu, const int *erratum) 84 { 85 int osvw_id = *erratum++; 86 u32 range; 87 u32 ms; 88 89 if (osvw_id >= 0 && osvw_id < 65536 && 90 cpu_has(cpu, X86_FEATURE_OSVW)) { 91 u64 osvw_len; 92 93 rdmsrl(MSR_AMD64_OSVW_ID_LENGTH, osvw_len); 94 if (osvw_id < osvw_len) { 95 u64 osvw_bits; 96 97 rdmsrl(MSR_AMD64_OSVW_STATUS + (osvw_id >> 6), 98 osvw_bits); 99 return osvw_bits & (1ULL << (osvw_id & 0x3f)); 100 } 101 } 102 103 /* OSVW unavailable or ID unknown, match family-model-stepping range */ 104 ms = (cpu->x86_model << 4) | cpu->x86_stepping; 105 while ((range = *erratum++)) 106 if ((cpu->x86 == AMD_MODEL_RANGE_FAMILY(range)) && 107 (ms >= AMD_MODEL_RANGE_START(range)) && 108 (ms <= AMD_MODEL_RANGE_END(range))) 109 return true; 110 111 return false; 112 } 113 114 static inline int rdmsrl_amd_safe(unsigned msr, unsigned long long *p) 115 { 116 u32 gprs[8] = { 0 }; 117 int err; 118 119 WARN_ONCE((boot_cpu_data.x86 != 0xf), 120 "%s should only be used on K8!\n", __func__); 121 122 gprs[1] = msr; 123 gprs[7] = 0x9c5a203a; 124 125 err = rdmsr_safe_regs(gprs); 126 127 *p = gprs[0] | ((u64)gprs[2] << 32); 128 129 return err; 130 } 131 132 static inline int wrmsrl_amd_safe(unsigned msr, unsigned long long val) 133 { 134 u32 gprs[8] = { 0 }; 135 136 WARN_ONCE((boot_cpu_data.x86 != 0xf), 137 "%s should only be used on K8!\n", __func__); 138 139 gprs[0] = (u32)val; 140 gprs[1] = msr; 141 gprs[2] = val >> 32; 142 gprs[7] = 0x9c5a203a; 143 144 return wrmsr_safe_regs(gprs); 145 } 146 147 /* 148 * B step AMD K6 before B 9730xxxx have hardware bugs that can cause 149 * misexecution of code under Linux. Owners of such processors should 150 * contact AMD for precise details and a CPU swap. 151 * 152 * See http://www.multimania.com/poulot/k6bug.html 153 * and section 2.6.2 of "AMD-K6 Processor Revision Guide - Model 6" 154 * (Publication # 21266 Issue Date: August 1998) 155 * 156 * The following test is erm.. interesting. AMD neglected to up 157 * the chip setting when fixing the bug but they also tweaked some 158 * performance at the same time.. 159 */ 160 161 #ifdef CONFIG_X86_32 162 extern __visible void vide(void); 163 __asm__(".text\n" 164 ".globl vide\n" 165 ".type vide, @function\n" 166 ".align 4\n" 167 "vide: ret\n"); 168 #endif 169 170 static void init_amd_k5(struct cpuinfo_x86 *c) 171 { 172 #ifdef CONFIG_X86_32 173 /* 174 * General Systems BIOSen alias the cpu frequency registers 175 * of the Elan at 0x000df000. Unfortunately, one of the Linux 176 * drivers subsequently pokes it, and changes the CPU speed. 177 * Workaround : Remove the unneeded alias. 178 */ 179 #define CBAR (0xfffc) /* Configuration Base Address (32-bit) */ 180 #define CBAR_ENB (0x80000000) 181 #define CBAR_KEY (0X000000CB) 182 if (c->x86_model == 9 || c->x86_model == 10) { 183 if (inl(CBAR) & CBAR_ENB) 184 outl(0 | CBAR_KEY, CBAR); 185 } 186 #endif 187 } 188 189 static void init_amd_k6(struct cpuinfo_x86 *c) 190 { 191 #ifdef CONFIG_X86_32 192 u32 l, h; 193 int mbytes = get_num_physpages() >> (20-PAGE_SHIFT); 194 195 if (c->x86_model < 6) { 196 /* Based on AMD doc 20734R - June 2000 */ 197 if (c->x86_model == 0) { 198 clear_cpu_cap(c, X86_FEATURE_APIC); 199 set_cpu_cap(c, X86_FEATURE_PGE); 200 } 201 return; 202 } 203 204 if (c->x86_model == 6 && c->x86_stepping == 1) { 205 const int K6_BUG_LOOP = 1000000; 206 int n; 207 void (*f_vide)(void); 208 u64 d, d2; 209 210 pr_info("AMD K6 stepping B detected - "); 211 212 /* 213 * It looks like AMD fixed the 2.6.2 bug and improved indirect 214 * calls at the same time. 215 */ 216 217 n = K6_BUG_LOOP; 218 f_vide = vide; 219 OPTIMIZER_HIDE_VAR(f_vide); 220 d = rdtsc(); 221 while (n--) 222 f_vide(); 223 d2 = rdtsc(); 224 d = d2-d; 225 226 if (d > 20*K6_BUG_LOOP) 227 pr_cont("system stability may be impaired when more than 32 MB are used.\n"); 228 else 229 pr_cont("probably OK (after B9730xxxx).\n"); 230 } 231 232 /* K6 with old style WHCR */ 233 if (c->x86_model < 8 || 234 (c->x86_model == 8 && c->x86_stepping < 8)) { 235 /* We can only write allocate on the low 508Mb */ 236 if (mbytes > 508) 237 mbytes = 508; 238 239 rdmsr(MSR_K6_WHCR, l, h); 240 if ((l&0x0000FFFF) == 0) { 241 unsigned long flags; 242 l = (1<<0)|((mbytes/4)<<1); 243 local_irq_save(flags); 244 wbinvd(); 245 wrmsr(MSR_K6_WHCR, l, h); 246 local_irq_restore(flags); 247 pr_info("Enabling old style K6 write allocation for %d Mb\n", 248 mbytes); 249 } 250 return; 251 } 252 253 if ((c->x86_model == 8 && c->x86_stepping > 7) || 254 c->x86_model == 9 || c->x86_model == 13) { 255 /* The more serious chips .. */ 256 257 if (mbytes > 4092) 258 mbytes = 4092; 259 260 rdmsr(MSR_K6_WHCR, l, h); 261 if ((l&0xFFFF0000) == 0) { 262 unsigned long flags; 263 l = ((mbytes>>2)<<22)|(1<<16); 264 local_irq_save(flags); 265 wbinvd(); 266 wrmsr(MSR_K6_WHCR, l, h); 267 local_irq_restore(flags); 268 pr_info("Enabling new style K6 write allocation for %d Mb\n", 269 mbytes); 270 } 271 272 return; 273 } 274 275 if (c->x86_model == 10) { 276 /* AMD Geode LX is model 10 */ 277 /* placeholder for any needed mods */ 278 return; 279 } 280 #endif 281 } 282 283 static void init_amd_k7(struct cpuinfo_x86 *c) 284 { 285 #ifdef CONFIG_X86_32 286 u32 l, h; 287 288 /* 289 * Bit 15 of Athlon specific MSR 15, needs to be 0 290 * to enable SSE on Palomino/Morgan/Barton CPU's. 291 * If the BIOS didn't enable it already, enable it here. 292 */ 293 if (c->x86_model >= 6 && c->x86_model <= 10) { 294 if (!cpu_has(c, X86_FEATURE_XMM)) { 295 pr_info("Enabling disabled K7/SSE Support.\n"); 296 msr_clear_bit(MSR_K7_HWCR, 15); 297 set_cpu_cap(c, X86_FEATURE_XMM); 298 } 299 } 300 301 /* 302 * It's been determined by AMD that Athlons since model 8 stepping 1 303 * are more robust with CLK_CTL set to 200xxxxx instead of 600xxxxx 304 * As per AMD technical note 27212 0.2 305 */ 306 if ((c->x86_model == 8 && c->x86_stepping >= 1) || (c->x86_model > 8)) { 307 rdmsr(MSR_K7_CLK_CTL, l, h); 308 if ((l & 0xfff00000) != 0x20000000) { 309 pr_info("CPU: CLK_CTL MSR was %x. Reprogramming to %x\n", 310 l, ((l & 0x000fffff)|0x20000000)); 311 wrmsr(MSR_K7_CLK_CTL, (l & 0x000fffff)|0x20000000, h); 312 } 313 } 314 315 /* calling is from identify_secondary_cpu() ? */ 316 if (!c->cpu_index) 317 return; 318 319 /* 320 * Certain Athlons might work (for various values of 'work') in SMP 321 * but they are not certified as MP capable. 322 */ 323 /* Athlon 660/661 is valid. */ 324 if ((c->x86_model == 6) && ((c->x86_stepping == 0) || 325 (c->x86_stepping == 1))) 326 return; 327 328 /* Duron 670 is valid */ 329 if ((c->x86_model == 7) && (c->x86_stepping == 0)) 330 return; 331 332 /* 333 * Athlon 662, Duron 671, and Athlon >model 7 have capability 334 * bit. It's worth noting that the A5 stepping (662) of some 335 * Athlon XP's have the MP bit set. 336 * See http://www.heise.de/newsticker/data/jow-18.10.01-000 for 337 * more. 338 */ 339 if (((c->x86_model == 6) && (c->x86_stepping >= 2)) || 340 ((c->x86_model == 7) && (c->x86_stepping >= 1)) || 341 (c->x86_model > 7)) 342 if (cpu_has(c, X86_FEATURE_MP)) 343 return; 344 345 /* If we get here, not a certified SMP capable AMD system. */ 346 347 /* 348 * Don't taint if we are running SMP kernel on a single non-MP 349 * approved Athlon 350 */ 351 WARN_ONCE(1, "WARNING: This combination of AMD" 352 " processors is not suitable for SMP.\n"); 353 add_taint(TAINT_CPU_OUT_OF_SPEC, LOCKDEP_NOW_UNRELIABLE); 354 #endif 355 } 356 357 #ifdef CONFIG_NUMA 358 /* 359 * To workaround broken NUMA config. Read the comment in 360 * srat_detect_node(). 361 */ 362 static int nearby_node(int apicid) 363 { 364 int i, node; 365 366 for (i = apicid - 1; i >= 0; i--) { 367 node = __apicid_to_node[i]; 368 if (node != NUMA_NO_NODE && node_online(node)) 369 return node; 370 } 371 for (i = apicid + 1; i < MAX_LOCAL_APIC; i++) { 372 node = __apicid_to_node[i]; 373 if (node != NUMA_NO_NODE && node_online(node)) 374 return node; 375 } 376 return first_node(node_online_map); /* Shouldn't happen */ 377 } 378 #endif 379 380 /* 381 * Fix up cpu_core_id for pre-F17h systems to be in the 382 * [0 .. cores_per_node - 1] range. Not really needed but 383 * kept so as not to break existing setups. 384 */ 385 static void legacy_fixup_core_id(struct cpuinfo_x86 *c) 386 { 387 u32 cus_per_node; 388 389 if (c->x86 >= 0x17) 390 return; 391 392 cus_per_node = c->x86_max_cores / nodes_per_socket; 393 c->cpu_core_id %= cus_per_node; 394 } 395 396 /* 397 * Fixup core topology information for 398 * (1) AMD multi-node processors 399 * Assumption: Number of cores in each internal node is the same. 400 * (2) AMD processors supporting compute units 401 */ 402 static void amd_get_topology(struct cpuinfo_x86 *c) 403 { 404 int cpu = smp_processor_id(); 405 406 /* get information required for multi-node processors */ 407 if (boot_cpu_has(X86_FEATURE_TOPOEXT)) { 408 int err; 409 u32 eax, ebx, ecx, edx; 410 411 cpuid(0x8000001e, &eax, &ebx, &ecx, &edx); 412 413 c->cpu_die_id = ecx & 0xff; 414 415 if (c->x86 == 0x15) 416 c->cu_id = ebx & 0xff; 417 418 if (c->x86 >= 0x17) { 419 c->cpu_core_id = ebx & 0xff; 420 421 if (smp_num_siblings > 1) 422 c->x86_max_cores /= smp_num_siblings; 423 } 424 425 /* 426 * In case leaf B is available, use it to derive 427 * topology information. 428 */ 429 err = detect_extended_topology(c); 430 if (!err) 431 c->x86_coreid_bits = get_count_order(c->x86_max_cores); 432 433 cacheinfo_amd_init_llc_id(c, cpu); 434 435 } else if (cpu_has(c, X86_FEATURE_NODEID_MSR)) { 436 u64 value; 437 438 rdmsrl(MSR_FAM10H_NODE_ID, value); 439 c->cpu_die_id = value & 7; 440 441 per_cpu(cpu_llc_id, cpu) = c->cpu_die_id; 442 } else 443 return; 444 445 if (nodes_per_socket > 1) { 446 set_cpu_cap(c, X86_FEATURE_AMD_DCM); 447 legacy_fixup_core_id(c); 448 } 449 } 450 451 /* 452 * On a AMD dual core setup the lower bits of the APIC id distinguish the cores. 453 * Assumes number of cores is a power of two. 454 */ 455 static void amd_detect_cmp(struct cpuinfo_x86 *c) 456 { 457 unsigned bits; 458 int cpu = smp_processor_id(); 459 460 bits = c->x86_coreid_bits; 461 /* Low order bits define the core id (index of core in socket) */ 462 c->cpu_core_id = c->initial_apicid & ((1 << bits)-1); 463 /* Convert the initial APIC ID into the socket ID */ 464 c->phys_proc_id = c->initial_apicid >> bits; 465 /* use socket ID also for last level cache */ 466 per_cpu(cpu_llc_id, cpu) = c->cpu_die_id = c->phys_proc_id; 467 } 468 469 u32 amd_get_nodes_per_socket(void) 470 { 471 return nodes_per_socket; 472 } 473 EXPORT_SYMBOL_GPL(amd_get_nodes_per_socket); 474 475 static void srat_detect_node(struct cpuinfo_x86 *c) 476 { 477 #ifdef CONFIG_NUMA 478 int cpu = smp_processor_id(); 479 int node; 480 unsigned apicid = c->apicid; 481 482 node = numa_cpu_node(cpu); 483 if (node == NUMA_NO_NODE) 484 node = get_llc_id(cpu); 485 486 /* 487 * On multi-fabric platform (e.g. Numascale NumaChip) a 488 * platform-specific handler needs to be called to fixup some 489 * IDs of the CPU. 490 */ 491 if (x86_cpuinit.fixup_cpu_id) 492 x86_cpuinit.fixup_cpu_id(c, node); 493 494 if (!node_online(node)) { 495 /* 496 * Two possibilities here: 497 * 498 * - The CPU is missing memory and no node was created. In 499 * that case try picking one from a nearby CPU. 500 * 501 * - The APIC IDs differ from the HyperTransport node IDs 502 * which the K8 northbridge parsing fills in. Assume 503 * they are all increased by a constant offset, but in 504 * the same order as the HT nodeids. If that doesn't 505 * result in a usable node fall back to the path for the 506 * previous case. 507 * 508 * This workaround operates directly on the mapping between 509 * APIC ID and NUMA node, assuming certain relationship 510 * between APIC ID, HT node ID and NUMA topology. As going 511 * through CPU mapping may alter the outcome, directly 512 * access __apicid_to_node[]. 513 */ 514 int ht_nodeid = c->initial_apicid; 515 516 if (__apicid_to_node[ht_nodeid] != NUMA_NO_NODE) 517 node = __apicid_to_node[ht_nodeid]; 518 /* Pick a nearby node */ 519 if (!node_online(node)) 520 node = nearby_node(apicid); 521 } 522 numa_set_node(cpu, node); 523 #endif 524 } 525 526 static void early_init_amd_mc(struct cpuinfo_x86 *c) 527 { 528 #ifdef CONFIG_SMP 529 unsigned bits, ecx; 530 531 /* Multi core CPU? */ 532 if (c->extended_cpuid_level < 0x80000008) 533 return; 534 535 ecx = cpuid_ecx(0x80000008); 536 537 c->x86_max_cores = (ecx & 0xff) + 1; 538 539 /* CPU telling us the core id bits shift? */ 540 bits = (ecx >> 12) & 0xF; 541 542 /* Otherwise recompute */ 543 if (bits == 0) { 544 while ((1 << bits) < c->x86_max_cores) 545 bits++; 546 } 547 548 c->x86_coreid_bits = bits; 549 #endif 550 } 551 552 static void bsp_init_amd(struct cpuinfo_x86 *c) 553 { 554 if (cpu_has(c, X86_FEATURE_CONSTANT_TSC)) { 555 556 if (c->x86 > 0x10 || 557 (c->x86 == 0x10 && c->x86_model >= 0x2)) { 558 u64 val; 559 560 rdmsrl(MSR_K7_HWCR, val); 561 if (!(val & BIT(24))) 562 pr_warn(FW_BUG "TSC doesn't count with P0 frequency!\n"); 563 } 564 } 565 566 if (c->x86 == 0x15) { 567 unsigned long upperbit; 568 u32 cpuid, assoc; 569 570 cpuid = cpuid_edx(0x80000005); 571 assoc = cpuid >> 16 & 0xff; 572 upperbit = ((cpuid >> 24) << 10) / assoc; 573 574 va_align.mask = (upperbit - 1) & PAGE_MASK; 575 va_align.flags = ALIGN_VA_32 | ALIGN_VA_64; 576 577 /* A random value per boot for bit slice [12:upper_bit) */ 578 va_align.bits = get_random_u32() & va_align.mask; 579 } 580 581 if (cpu_has(c, X86_FEATURE_MWAITX)) 582 use_mwaitx_delay(); 583 584 if (boot_cpu_has(X86_FEATURE_TOPOEXT)) { 585 u32 ecx; 586 587 ecx = cpuid_ecx(0x8000001e); 588 __max_die_per_package = nodes_per_socket = ((ecx >> 8) & 7) + 1; 589 } else if (boot_cpu_has(X86_FEATURE_NODEID_MSR)) { 590 u64 value; 591 592 rdmsrl(MSR_FAM10H_NODE_ID, value); 593 __max_die_per_package = nodes_per_socket = ((value >> 3) & 7) + 1; 594 } 595 596 if (!boot_cpu_has(X86_FEATURE_AMD_SSBD) && 597 !boot_cpu_has(X86_FEATURE_VIRT_SSBD) && 598 c->x86 >= 0x15 && c->x86 <= 0x17) { 599 unsigned int bit; 600 601 switch (c->x86) { 602 case 0x15: bit = 54; break; 603 case 0x16: bit = 33; break; 604 case 0x17: bit = 10; break; 605 default: return; 606 } 607 /* 608 * Try to cache the base value so further operations can 609 * avoid RMW. If that faults, do not enable SSBD. 610 */ 611 if (!rdmsrl_safe(MSR_AMD64_LS_CFG, &x86_amd_ls_cfg_base)) { 612 setup_force_cpu_cap(X86_FEATURE_LS_CFG_SSBD); 613 setup_force_cpu_cap(X86_FEATURE_SSBD); 614 x86_amd_ls_cfg_ssbd_mask = 1ULL << bit; 615 } 616 } 617 618 resctrl_cpu_detect(c); 619 } 620 621 static void early_detect_mem_encrypt(struct cpuinfo_x86 *c) 622 { 623 u64 msr; 624 625 /* 626 * BIOS support is required for SME and SEV. 627 * For SME: If BIOS has enabled SME then adjust x86_phys_bits by 628 * the SME physical address space reduction value. 629 * If BIOS has not enabled SME then don't advertise the 630 * SME feature (set in scattered.c). 631 * If the kernel has not enabled SME via any means then 632 * don't advertise the SME feature. 633 * For SEV: If BIOS has not enabled SEV then don't advertise the 634 * SEV and SEV_ES feature (set in scattered.c). 635 * 636 * In all cases, since support for SME and SEV requires long mode, 637 * don't advertise the feature under CONFIG_X86_32. 638 */ 639 if (cpu_has(c, X86_FEATURE_SME) || cpu_has(c, X86_FEATURE_SEV)) { 640 /* Check if memory encryption is enabled */ 641 rdmsrl(MSR_AMD64_SYSCFG, msr); 642 if (!(msr & MSR_AMD64_SYSCFG_MEM_ENCRYPT)) 643 goto clear_all; 644 645 /* 646 * Always adjust physical address bits. Even though this 647 * will be a value above 32-bits this is still done for 648 * CONFIG_X86_32 so that accurate values are reported. 649 */ 650 c->x86_phys_bits -= (cpuid_ebx(0x8000001f) >> 6) & 0x3f; 651 652 if (IS_ENABLED(CONFIG_X86_32)) 653 goto clear_all; 654 655 if (!sme_me_mask) 656 setup_clear_cpu_cap(X86_FEATURE_SME); 657 658 rdmsrl(MSR_K7_HWCR, msr); 659 if (!(msr & MSR_K7_HWCR_SMMLOCK)) 660 goto clear_sev; 661 662 return; 663 664 clear_all: 665 setup_clear_cpu_cap(X86_FEATURE_SME); 666 clear_sev: 667 setup_clear_cpu_cap(X86_FEATURE_SEV); 668 setup_clear_cpu_cap(X86_FEATURE_SEV_ES); 669 } 670 } 671 672 static void early_init_amd(struct cpuinfo_x86 *c) 673 { 674 u64 value; 675 u32 dummy; 676 677 early_init_amd_mc(c); 678 679 if (c->x86 >= 0xf) 680 set_cpu_cap(c, X86_FEATURE_K8); 681 682 rdmsr_safe(MSR_AMD64_PATCH_LEVEL, &c->microcode, &dummy); 683 684 /* 685 * c->x86_power is 8000_0007 edx. Bit 8 is TSC runs at constant rate 686 * with P/T states and does not stop in deep C-states 687 */ 688 if (c->x86_power & (1 << 8)) { 689 set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC); 690 set_cpu_cap(c, X86_FEATURE_NONSTOP_TSC); 691 } 692 693 /* Bit 12 of 8000_0007 edx is accumulated power mechanism. */ 694 if (c->x86_power & BIT(12)) 695 set_cpu_cap(c, X86_FEATURE_ACC_POWER); 696 697 /* Bit 14 indicates the Runtime Average Power Limit interface. */ 698 if (c->x86_power & BIT(14)) 699 set_cpu_cap(c, X86_FEATURE_RAPL); 700 701 #ifdef CONFIG_X86_64 702 set_cpu_cap(c, X86_FEATURE_SYSCALL32); 703 #else 704 /* Set MTRR capability flag if appropriate */ 705 if (c->x86 == 5) 706 if (c->x86_model == 13 || c->x86_model == 9 || 707 (c->x86_model == 8 && c->x86_stepping >= 8)) 708 set_cpu_cap(c, X86_FEATURE_K6_MTRR); 709 #endif 710 #if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_PCI) 711 /* 712 * ApicID can always be treated as an 8-bit value for AMD APIC versions 713 * >= 0x10, but even old K8s came out of reset with version 0x10. So, we 714 * can safely set X86_FEATURE_EXTD_APICID unconditionally for families 715 * after 16h. 716 */ 717 if (boot_cpu_has(X86_FEATURE_APIC)) { 718 if (c->x86 > 0x16) 719 set_cpu_cap(c, X86_FEATURE_EXTD_APICID); 720 else if (c->x86 >= 0xf) { 721 /* check CPU config space for extended APIC ID */ 722 unsigned int val; 723 724 val = read_pci_config(0, 24, 0, 0x68); 725 if ((val >> 17 & 0x3) == 0x3) 726 set_cpu_cap(c, X86_FEATURE_EXTD_APICID); 727 } 728 } 729 #endif 730 731 /* 732 * This is only needed to tell the kernel whether to use VMCALL 733 * and VMMCALL. VMMCALL is never executed except under virt, so 734 * we can set it unconditionally. 735 */ 736 set_cpu_cap(c, X86_FEATURE_VMMCALL); 737 738 /* F16h erratum 793, CVE-2013-6885 */ 739 if (c->x86 == 0x16 && c->x86_model <= 0xf) 740 msr_set_bit(MSR_AMD64_LS_CFG, 15); 741 742 /* 743 * Check whether the machine is affected by erratum 400. This is 744 * used to select the proper idle routine and to enable the check 745 * whether the machine is affected in arch_post_acpi_init(), which 746 * sets the X86_BUG_AMD_APIC_C1E bug depending on the MSR check. 747 */ 748 if (cpu_has_amd_erratum(c, amd_erratum_400)) 749 set_cpu_bug(c, X86_BUG_AMD_E400); 750 751 early_detect_mem_encrypt(c); 752 753 /* Re-enable TopologyExtensions if switched off by BIOS */ 754 if (c->x86 == 0x15 && 755 (c->x86_model >= 0x10 && c->x86_model <= 0x6f) && 756 !cpu_has(c, X86_FEATURE_TOPOEXT)) { 757 758 if (msr_set_bit(0xc0011005, 54) > 0) { 759 rdmsrl(0xc0011005, value); 760 if (value & BIT_64(54)) { 761 set_cpu_cap(c, X86_FEATURE_TOPOEXT); 762 pr_info_once(FW_INFO "CPU: Re-enabling disabled Topology Extensions Support.\n"); 763 } 764 } 765 } 766 767 if (cpu_has(c, X86_FEATURE_TOPOEXT)) 768 smp_num_siblings = ((cpuid_ebx(0x8000001e) >> 8) & 0xff) + 1; 769 770 if (!cpu_has(c, X86_FEATURE_HYPERVISOR) && !cpu_has(c, X86_FEATURE_IBPB_BRTYPE)) { 771 if (c->x86 == 0x17 && boot_cpu_has(X86_FEATURE_AMD_IBPB)) 772 setup_force_cpu_cap(X86_FEATURE_IBPB_BRTYPE); 773 else if (c->x86 >= 0x19 && !wrmsrl_safe(MSR_IA32_PRED_CMD, PRED_CMD_SBPB)) { 774 setup_force_cpu_cap(X86_FEATURE_IBPB_BRTYPE); 775 setup_force_cpu_cap(X86_FEATURE_SBPB); 776 } 777 } 778 } 779 780 static void init_amd_k8(struct cpuinfo_x86 *c) 781 { 782 u32 level; 783 u64 value; 784 785 /* On C+ stepping K8 rep microcode works well for copy/memset */ 786 level = cpuid_eax(1); 787 if ((level >= 0x0f48 && level < 0x0f50) || level >= 0x0f58) 788 set_cpu_cap(c, X86_FEATURE_REP_GOOD); 789 790 /* 791 * Some BIOSes incorrectly force this feature, but only K8 revision D 792 * (model = 0x14) and later actually support it. 793 * (AMD Erratum #110, docId: 25759). 794 */ 795 if (c->x86_model < 0x14 && cpu_has(c, X86_FEATURE_LAHF_LM)) { 796 clear_cpu_cap(c, X86_FEATURE_LAHF_LM); 797 if (!rdmsrl_amd_safe(0xc001100d, &value)) { 798 value &= ~BIT_64(32); 799 wrmsrl_amd_safe(0xc001100d, value); 800 } 801 } 802 803 if (!c->x86_model_id[0]) 804 strcpy(c->x86_model_id, "Hammer"); 805 806 #ifdef CONFIG_SMP 807 /* 808 * Disable TLB flush filter by setting HWCR.FFDIS on K8 809 * bit 6 of msr C001_0015 810 * 811 * Errata 63 for SH-B3 steppings 812 * Errata 122 for all steppings (F+ have it disabled by default) 813 */ 814 msr_set_bit(MSR_K7_HWCR, 6); 815 #endif 816 set_cpu_bug(c, X86_BUG_SWAPGS_FENCE); 817 } 818 819 static void init_amd_gh(struct cpuinfo_x86 *c) 820 { 821 #ifdef CONFIG_MMCONF_FAM10H 822 /* do this for boot cpu */ 823 if (c == &boot_cpu_data) 824 check_enable_amd_mmconf_dmi(); 825 826 fam10h_check_enable_mmcfg(); 827 #endif 828 829 /* 830 * Disable GART TLB Walk Errors on Fam10h. We do this here because this 831 * is always needed when GART is enabled, even in a kernel which has no 832 * MCE support built in. BIOS should disable GartTlbWlk Errors already. 833 * If it doesn't, we do it here as suggested by the BKDG. 834 * 835 * Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=33012 836 */ 837 msr_set_bit(MSR_AMD64_MCx_MASK(4), 10); 838 839 /* 840 * On family 10h BIOS may not have properly enabled WC+ support, causing 841 * it to be converted to CD memtype. This may result in performance 842 * degradation for certain nested-paging guests. Prevent this conversion 843 * by clearing bit 24 in MSR_AMD64_BU_CFG2. 844 * 845 * NOTE: we want to use the _safe accessors so as not to #GP kvm 846 * guests on older kvm hosts. 847 */ 848 msr_clear_bit(MSR_AMD64_BU_CFG2, 24); 849 850 if (cpu_has_amd_erratum(c, amd_erratum_383)) 851 set_cpu_bug(c, X86_BUG_AMD_TLB_MMATCH); 852 } 853 854 static void init_amd_ln(struct cpuinfo_x86 *c) 855 { 856 /* 857 * Apply erratum 665 fix unconditionally so machines without a BIOS 858 * fix work. 859 */ 860 msr_set_bit(MSR_AMD64_DE_CFG, 31); 861 } 862 863 static bool rdrand_force; 864 865 static int __init rdrand_cmdline(char *str) 866 { 867 if (!str) 868 return -EINVAL; 869 870 if (!strcmp(str, "force")) 871 rdrand_force = true; 872 else 873 return -EINVAL; 874 875 return 0; 876 } 877 early_param("rdrand", rdrand_cmdline); 878 879 static void clear_rdrand_cpuid_bit(struct cpuinfo_x86 *c) 880 { 881 /* 882 * Saving of the MSR used to hide the RDRAND support during 883 * suspend/resume is done by arch/x86/power/cpu.c, which is 884 * dependent on CONFIG_PM_SLEEP. 885 */ 886 if (!IS_ENABLED(CONFIG_PM_SLEEP)) 887 return; 888 889 /* 890 * The self-test can clear X86_FEATURE_RDRAND, so check for 891 * RDRAND support using the CPUID function directly. 892 */ 893 if (!(cpuid_ecx(1) & BIT(30)) || rdrand_force) 894 return; 895 896 msr_clear_bit(MSR_AMD64_CPUID_FN_1, 62); 897 898 /* 899 * Verify that the CPUID change has occurred in case the kernel is 900 * running virtualized and the hypervisor doesn't support the MSR. 901 */ 902 if (cpuid_ecx(1) & BIT(30)) { 903 pr_info_once("BIOS may not properly restore RDRAND after suspend, but hypervisor does not support hiding RDRAND via CPUID.\n"); 904 return; 905 } 906 907 clear_cpu_cap(c, X86_FEATURE_RDRAND); 908 pr_info_once("BIOS may not properly restore RDRAND after suspend, hiding RDRAND via CPUID. Use rdrand=force to reenable.\n"); 909 } 910 911 static void init_amd_jg(struct cpuinfo_x86 *c) 912 { 913 /* 914 * Some BIOS implementations do not restore proper RDRAND support 915 * across suspend and resume. Check on whether to hide the RDRAND 916 * instruction support via CPUID. 917 */ 918 clear_rdrand_cpuid_bit(c); 919 } 920 921 static void init_amd_bd(struct cpuinfo_x86 *c) 922 { 923 u64 value; 924 925 /* 926 * The way access filter has a performance penalty on some workloads. 927 * Disable it on the affected CPUs. 928 */ 929 if ((c->x86_model >= 0x02) && (c->x86_model < 0x20)) { 930 if (!rdmsrl_safe(MSR_F15H_IC_CFG, &value) && !(value & 0x1E)) { 931 value |= 0x1E; 932 wrmsrl_safe(MSR_F15H_IC_CFG, value); 933 } 934 } 935 936 /* 937 * Some BIOS implementations do not restore proper RDRAND support 938 * across suspend and resume. Check on whether to hide the RDRAND 939 * instruction support via CPUID. 940 */ 941 clear_rdrand_cpuid_bit(c); 942 } 943 944 void init_spectral_chicken(struct cpuinfo_x86 *c) 945 { 946 #ifdef CONFIG_CPU_UNRET_ENTRY 947 u64 value; 948 949 /* 950 * On Zen2 we offer this chicken (bit) on the altar of Speculation. 951 * 952 * This suppresses speculation from the middle of a basic block, i.e. it 953 * suppresses non-branch predictions. 954 * 955 * We use STIBP as a heuristic to filter out Zen2 from the rest of F17H 956 */ 957 if (!cpu_has(c, X86_FEATURE_HYPERVISOR) && cpu_has(c, X86_FEATURE_AMD_STIBP)) { 958 if (!rdmsrl_safe(MSR_ZEN2_SPECTRAL_CHICKEN, &value)) { 959 value |= MSR_ZEN2_SPECTRAL_CHICKEN_BIT; 960 wrmsrl_safe(MSR_ZEN2_SPECTRAL_CHICKEN, value); 961 } 962 } 963 #endif 964 /* 965 * Work around Erratum 1386. The XSAVES instruction malfunctions in 966 * certain circumstances on Zen1/2 uarch, and not all parts have had 967 * updated microcode at the time of writing (March 2023). 968 * 969 * Affected parts all have no supervisor XSAVE states, meaning that 970 * the XSAVEC instruction (which works fine) is equivalent. 971 */ 972 clear_cpu_cap(c, X86_FEATURE_XSAVES); 973 } 974 975 static void init_amd_zn(struct cpuinfo_x86 *c) 976 { 977 set_cpu_cap(c, X86_FEATURE_ZEN); 978 979 #ifdef CONFIG_NUMA 980 node_reclaim_distance = 32; 981 #endif 982 983 /* Fix up CPUID bits, but only if not virtualised. */ 984 if (!cpu_has(c, X86_FEATURE_HYPERVISOR)) { 985 986 /* Erratum 1076: CPB feature bit not being set in CPUID. */ 987 if (!cpu_has(c, X86_FEATURE_CPB)) 988 set_cpu_cap(c, X86_FEATURE_CPB); 989 990 /* 991 * Zen3 (Fam19 model < 0x10) parts are not susceptible to 992 * Branch Type Confusion, but predate the allocation of the 993 * BTC_NO bit. 994 */ 995 if (c->x86 == 0x19 && !cpu_has(c, X86_FEATURE_BTC_NO)) 996 set_cpu_cap(c, X86_FEATURE_BTC_NO); 997 } 998 } 999 1000 static bool cpu_has_zenbleed_microcode(void) 1001 { 1002 u32 good_rev = 0; 1003 1004 switch (boot_cpu_data.x86_model) { 1005 case 0x30 ... 0x3f: good_rev = 0x0830107a; break; 1006 case 0x60 ... 0x67: good_rev = 0x0860010b; break; 1007 case 0x68 ... 0x6f: good_rev = 0x08608105; break; 1008 case 0x70 ... 0x7f: good_rev = 0x08701032; break; 1009 case 0xa0 ... 0xaf: good_rev = 0x08a00008; break; 1010 1011 default: 1012 return false; 1013 break; 1014 } 1015 1016 if (boot_cpu_data.microcode < good_rev) 1017 return false; 1018 1019 return true; 1020 } 1021 1022 static void zenbleed_check(struct cpuinfo_x86 *c) 1023 { 1024 if (!cpu_has_amd_erratum(c, amd_zenbleed)) 1025 return; 1026 1027 if (cpu_has(c, X86_FEATURE_HYPERVISOR)) 1028 return; 1029 1030 if (!cpu_has(c, X86_FEATURE_AVX)) 1031 return; 1032 1033 if (!cpu_has_zenbleed_microcode()) { 1034 pr_notice_once("Zenbleed: please update your microcode for the most optimal fix\n"); 1035 msr_set_bit(MSR_AMD64_DE_CFG, MSR_AMD64_DE_CFG_ZEN2_FP_BACKUP_FIX_BIT); 1036 } else { 1037 msr_clear_bit(MSR_AMD64_DE_CFG, MSR_AMD64_DE_CFG_ZEN2_FP_BACKUP_FIX_BIT); 1038 } 1039 } 1040 1041 static void init_amd(struct cpuinfo_x86 *c) 1042 { 1043 early_init_amd(c); 1044 1045 /* 1046 * Bit 31 in normal CPUID used for nonstandard 3DNow ID; 1047 * 3DNow is IDd by bit 31 in extended CPUID (1*32+31) anyway 1048 */ 1049 clear_cpu_cap(c, 0*32+31); 1050 1051 if (c->x86 >= 0x10) 1052 set_cpu_cap(c, X86_FEATURE_REP_GOOD); 1053 1054 /* AMD FSRM also implies FSRS */ 1055 if (cpu_has(c, X86_FEATURE_FSRM)) 1056 set_cpu_cap(c, X86_FEATURE_FSRS); 1057 1058 /* get apicid instead of initial apic id from cpuid */ 1059 c->apicid = read_apic_id(); 1060 1061 /* K6s reports MCEs but don't actually have all the MSRs */ 1062 if (c->x86 < 6) 1063 clear_cpu_cap(c, X86_FEATURE_MCE); 1064 1065 switch (c->x86) { 1066 case 4: init_amd_k5(c); break; 1067 case 5: init_amd_k6(c); break; 1068 case 6: init_amd_k7(c); break; 1069 case 0xf: init_amd_k8(c); break; 1070 case 0x10: init_amd_gh(c); break; 1071 case 0x12: init_amd_ln(c); break; 1072 case 0x15: init_amd_bd(c); break; 1073 case 0x16: init_amd_jg(c); break; 1074 case 0x17: init_spectral_chicken(c); 1075 fallthrough; 1076 case 0x19: init_amd_zn(c); break; 1077 } 1078 1079 /* 1080 * Enable workaround for FXSAVE leak on CPUs 1081 * without a XSaveErPtr feature 1082 */ 1083 if ((c->x86 >= 6) && (!cpu_has(c, X86_FEATURE_XSAVEERPTR))) 1084 set_cpu_bug(c, X86_BUG_FXSAVE_LEAK); 1085 1086 cpu_detect_cache_sizes(c); 1087 1088 amd_detect_cmp(c); 1089 amd_get_topology(c); 1090 srat_detect_node(c); 1091 1092 init_amd_cacheinfo(c); 1093 1094 if (!cpu_has(c, X86_FEATURE_LFENCE_RDTSC) && cpu_has(c, X86_FEATURE_XMM2)) { 1095 /* 1096 * Use LFENCE for execution serialization. On families which 1097 * don't have that MSR, LFENCE is already serializing. 1098 * msr_set_bit() uses the safe accessors, too, even if the MSR 1099 * is not present. 1100 */ 1101 msr_set_bit(MSR_AMD64_DE_CFG, 1102 MSR_AMD64_DE_CFG_LFENCE_SERIALIZE_BIT); 1103 1104 /* A serializing LFENCE stops RDTSC speculation */ 1105 set_cpu_cap(c, X86_FEATURE_LFENCE_RDTSC); 1106 } 1107 1108 /* 1109 * Family 0x12 and above processors have APIC timer 1110 * running in deep C states. 1111 */ 1112 if (c->x86 > 0x11) 1113 set_cpu_cap(c, X86_FEATURE_ARAT); 1114 1115 /* 3DNow or LM implies PREFETCHW */ 1116 if (!cpu_has(c, X86_FEATURE_3DNOWPREFETCH)) 1117 if (cpu_has(c, X86_FEATURE_3DNOW) || cpu_has(c, X86_FEATURE_LM)) 1118 set_cpu_cap(c, X86_FEATURE_3DNOWPREFETCH); 1119 1120 /* AMD CPUs don't reset SS attributes on SYSRET, Xen does. */ 1121 if (!cpu_feature_enabled(X86_FEATURE_XENPV)) 1122 set_cpu_bug(c, X86_BUG_SYSRET_SS_ATTRS); 1123 1124 /* 1125 * Turn on the Instructions Retired free counter on machines not 1126 * susceptible to erratum #1054 "Instructions Retired Performance 1127 * Counter May Be Inaccurate". 1128 */ 1129 if (cpu_has(c, X86_FEATURE_IRPERF) && 1130 !cpu_has_amd_erratum(c, amd_erratum_1054)) 1131 msr_set_bit(MSR_K7_HWCR, MSR_K7_HWCR_IRPERF_EN_BIT); 1132 1133 check_null_seg_clears_base(c); 1134 1135 /* 1136 * Make sure EFER[AIBRSE - Automatic IBRS Enable] is set. The APs are brought up 1137 * using the trampoline code and as part of it, MSR_EFER gets prepared there in 1138 * order to be replicated onto them. Regardless, set it here again, if not set, 1139 * to protect against any future refactoring/code reorganization which might 1140 * miss setting this important bit. 1141 */ 1142 if (spectre_v2_in_eibrs_mode(spectre_v2_enabled) && 1143 cpu_has(c, X86_FEATURE_AUTOIBRS)) 1144 WARN_ON_ONCE(msr_set_bit(MSR_EFER, _EFER_AUTOIBRS)); 1145 1146 zenbleed_check(c); 1147 1148 if (cpu_has_amd_erratum(c, amd_div0)) { 1149 pr_notice_once("AMD Zen1 DIV0 bug detected. Disable SMT for full protection.\n"); 1150 setup_force_cpu_bug(X86_BUG_DIV0); 1151 } 1152 } 1153 1154 #ifdef CONFIG_X86_32 1155 static unsigned int amd_size_cache(struct cpuinfo_x86 *c, unsigned int size) 1156 { 1157 /* AMD errata T13 (order #21922) */ 1158 if (c->x86 == 6) { 1159 /* Duron Rev A0 */ 1160 if (c->x86_model == 3 && c->x86_stepping == 0) 1161 size = 64; 1162 /* Tbird rev A1/A2 */ 1163 if (c->x86_model == 4 && 1164 (c->x86_stepping == 0 || c->x86_stepping == 1)) 1165 size = 256; 1166 } 1167 return size; 1168 } 1169 #endif 1170 1171 static void cpu_detect_tlb_amd(struct cpuinfo_x86 *c) 1172 { 1173 u32 ebx, eax, ecx, edx; 1174 u16 mask = 0xfff; 1175 1176 if (c->x86 < 0xf) 1177 return; 1178 1179 if (c->extended_cpuid_level < 0x80000006) 1180 return; 1181 1182 cpuid(0x80000006, &eax, &ebx, &ecx, &edx); 1183 1184 tlb_lld_4k[ENTRIES] = (ebx >> 16) & mask; 1185 tlb_lli_4k[ENTRIES] = ebx & mask; 1186 1187 /* 1188 * K8 doesn't have 2M/4M entries in the L2 TLB so read out the L1 TLB 1189 * characteristics from the CPUID function 0x80000005 instead. 1190 */ 1191 if (c->x86 == 0xf) { 1192 cpuid(0x80000005, &eax, &ebx, &ecx, &edx); 1193 mask = 0xff; 1194 } 1195 1196 /* Handle DTLB 2M and 4M sizes, fall back to L1 if L2 is disabled */ 1197 if (!((eax >> 16) & mask)) 1198 tlb_lld_2m[ENTRIES] = (cpuid_eax(0x80000005) >> 16) & 0xff; 1199 else 1200 tlb_lld_2m[ENTRIES] = (eax >> 16) & mask; 1201 1202 /* a 4M entry uses two 2M entries */ 1203 tlb_lld_4m[ENTRIES] = tlb_lld_2m[ENTRIES] >> 1; 1204 1205 /* Handle ITLB 2M and 4M sizes, fall back to L1 if L2 is disabled */ 1206 if (!(eax & mask)) { 1207 /* Erratum 658 */ 1208 if (c->x86 == 0x15 && c->x86_model <= 0x1f) { 1209 tlb_lli_2m[ENTRIES] = 1024; 1210 } else { 1211 cpuid(0x80000005, &eax, &ebx, &ecx, &edx); 1212 tlb_lli_2m[ENTRIES] = eax & 0xff; 1213 } 1214 } else 1215 tlb_lli_2m[ENTRIES] = eax & mask; 1216 1217 tlb_lli_4m[ENTRIES] = tlb_lli_2m[ENTRIES] >> 1; 1218 } 1219 1220 static const struct cpu_dev amd_cpu_dev = { 1221 .c_vendor = "AMD", 1222 .c_ident = { "AuthenticAMD" }, 1223 #ifdef CONFIG_X86_32 1224 .legacy_models = { 1225 { .family = 4, .model_names = 1226 { 1227 [3] = "486 DX/2", 1228 [7] = "486 DX/2-WB", 1229 [8] = "486 DX/4", 1230 [9] = "486 DX/4-WB", 1231 [14] = "Am5x86-WT", 1232 [15] = "Am5x86-WB" 1233 } 1234 }, 1235 }, 1236 .legacy_cache_size = amd_size_cache, 1237 #endif 1238 .c_early_init = early_init_amd, 1239 .c_detect_tlb = cpu_detect_tlb_amd, 1240 .c_bsp_init = bsp_init_amd, 1241 .c_init = init_amd, 1242 .c_x86_vendor = X86_VENDOR_AMD, 1243 }; 1244 1245 cpu_dev_register(amd_cpu_dev); 1246 1247 static DEFINE_PER_CPU_READ_MOSTLY(unsigned long[4], amd_dr_addr_mask); 1248 1249 static unsigned int amd_msr_dr_addr_masks[] = { 1250 MSR_F16H_DR0_ADDR_MASK, 1251 MSR_F16H_DR1_ADDR_MASK, 1252 MSR_F16H_DR1_ADDR_MASK + 1, 1253 MSR_F16H_DR1_ADDR_MASK + 2 1254 }; 1255 1256 void amd_set_dr_addr_mask(unsigned long mask, unsigned int dr) 1257 { 1258 int cpu = smp_processor_id(); 1259 1260 if (!cpu_feature_enabled(X86_FEATURE_BPEXT)) 1261 return; 1262 1263 if (WARN_ON_ONCE(dr >= ARRAY_SIZE(amd_msr_dr_addr_masks))) 1264 return; 1265 1266 if (per_cpu(amd_dr_addr_mask, cpu)[dr] == mask) 1267 return; 1268 1269 wrmsr(amd_msr_dr_addr_masks[dr], mask, 0); 1270 per_cpu(amd_dr_addr_mask, cpu)[dr] = mask; 1271 } 1272 1273 unsigned long amd_get_dr_addr_mask(unsigned int dr) 1274 { 1275 if (!cpu_feature_enabled(X86_FEATURE_BPEXT)) 1276 return 0; 1277 1278 if (WARN_ON_ONCE(dr >= ARRAY_SIZE(amd_msr_dr_addr_masks))) 1279 return 0; 1280 1281 return per_cpu(amd_dr_addr_mask[dr], smp_processor_id()); 1282 } 1283 EXPORT_SYMBOL_GPL(amd_get_dr_addr_mask); 1284 1285 u32 amd_get_highest_perf(void) 1286 { 1287 struct cpuinfo_x86 *c = &boot_cpu_data; 1288 1289 if (c->x86 == 0x17 && ((c->x86_model >= 0x30 && c->x86_model < 0x40) || 1290 (c->x86_model >= 0x70 && c->x86_model < 0x80))) 1291 return 166; 1292 1293 if (c->x86 == 0x19 && ((c->x86_model >= 0x20 && c->x86_model < 0x30) || 1294 (c->x86_model >= 0x40 && c->x86_model < 0x70))) 1295 return 166; 1296 1297 return 255; 1298 } 1299 EXPORT_SYMBOL_GPL(amd_get_highest_perf); 1300 1301 static void zenbleed_check_cpu(void *unused) 1302 { 1303 struct cpuinfo_x86 *c = &cpu_data(smp_processor_id()); 1304 1305 zenbleed_check(c); 1306 } 1307 1308 void amd_check_microcode(void) 1309 { 1310 on_each_cpu(zenbleed_check_cpu, NULL, 1); 1311 } 1312 1313 /* 1314 * Issue a DIV 0/1 insn to clear any division data from previous DIV 1315 * operations. 1316 */ 1317 void noinstr amd_clear_divider(void) 1318 { 1319 asm volatile(ALTERNATIVE("", "div %2\n\t", X86_BUG_DIV0) 1320 :: "a" (0), "d" (0), "r" (1)); 1321 } 1322 EXPORT_SYMBOL_GPL(amd_clear_divider); 1323