xref: /linux/drivers/ata/ahci_ceva.c (revision f0a559aa)
1 /*
2  * Copyright (C) 2015 Xilinx, Inc.
3  * CEVA AHCI SATA platform driver
4  *
5  * based on the AHCI SATA platform driver by Jeff Garzik and Anton Vorontsov
6  *
7  * This program is free software; you can redistribute it and/or modify it
8  * under the terms and conditions of the GNU General Public License,
9  * version 2, as published by the Free Software Foundation.
10  *
11  * This program is distributed in the hope it will be useful, but WITHOUT
12  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
13  * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
14  * more details.
15  *
16  * You should have received a copy of the GNU General Public License along with
17  * this program. If not, see <http://www.gnu.org/licenses/>.
18  */
19 
20 #include <linux/ahci_platform.h>
21 #include <linux/kernel.h>
22 #include <linux/libata.h>
23 #include <linux/module.h>
24 #include <linux/of_device.h>
25 #include <linux/platform_device.h>
26 #include "ahci.h"
27 
28 /* Vendor Specific Register Offsets */
29 #define AHCI_VEND_PCFG  0xA4
30 #define AHCI_VEND_PPCFG 0xA8
31 #define AHCI_VEND_PP2C  0xAC
32 #define AHCI_VEND_PP3C  0xB0
33 #define AHCI_VEND_PP4C  0xB4
34 #define AHCI_VEND_PP5C  0xB8
35 #define AHCI_VEND_AXICC 0xBC
36 #define AHCI_VEND_PAXIC 0xC0
37 #define AHCI_VEND_PTC   0xC8
38 
39 /* Vendor Specific Register bit definitions */
40 #define PAXIC_ADBW_BW64 0x1
41 #define PAXIC_MAWID(i)	(((i) * 2) << 4)
42 #define PAXIC_MARID(i)	(((i) * 2) << 12)
43 #define PAXIC_MARIDD(i)	((((i) * 2) + 1) << 16)
44 #define PAXIC_MAWIDD(i)	((((i) * 2) + 1) << 8)
45 #define PAXIC_OTL	(0x4 << 20)
46 
47 /* Register bit definitions for cache control */
48 #define AXICC_ARCA_VAL  (0xF << 0)
49 #define AXICC_ARCF_VAL  (0xF << 4)
50 #define AXICC_ARCH_VAL  (0xF << 8)
51 #define AXICC_ARCP_VAL  (0xF << 12)
52 #define AXICC_AWCFD_VAL (0xF << 16)
53 #define AXICC_AWCD_VAL  (0xF << 20)
54 #define AXICC_AWCF_VAL  (0xF << 24)
55 
56 #define PCFG_TPSS_VAL	(0x32 << 16)
57 #define PCFG_TPRS_VAL	(0x2 << 12)
58 #define PCFG_PAD_VAL	0x2
59 
60 #define PPCFG_TTA	0x1FFFE
61 #define PPCFG_PSSO_EN	(1 << 28)
62 #define PPCFG_PSS_EN	(1 << 29)
63 #define PPCFG_ESDF_EN	(1 << 31)
64 
65 #define PP5C_RIT	0x60216
66 #define PP5C_RCT	(0x7f0 << 20)
67 
68 #define PTC_RX_WM_VAL	0x40
69 #define PTC_RSVD	(1 << 27)
70 
71 #define PORT0_BASE	0x100
72 #define PORT1_BASE	0x180
73 
74 /* Port Control Register Bit Definitions */
75 #define PORT_SCTL_SPD_GEN3	(0x3 << 4)
76 #define PORT_SCTL_SPD_GEN2	(0x2 << 4)
77 #define PORT_SCTL_SPD_GEN1	(0x1 << 4)
78 #define PORT_SCTL_IPM		(0x3 << 8)
79 
80 #define PORT_BASE	0x100
81 #define PORT_OFFSET	0x80
82 #define NR_PORTS	2
83 #define DRV_NAME	"ahci-ceva"
84 #define CEVA_FLAG_BROKEN_GEN2	1
85 
86 static unsigned int rx_watermark = PTC_RX_WM_VAL;
87 module_param(rx_watermark, uint, 0644);
88 MODULE_PARM_DESC(rx_watermark, "RxWaterMark value (0 - 0x80)");
89 
90 struct ceva_ahci_priv {
91 	struct platform_device *ahci_pdev;
92 	/* Port Phy2Cfg Register */
93 	u32 pp2c[NR_PORTS];
94 	u32 pp3c[NR_PORTS];
95 	u32 pp4c[NR_PORTS];
96 	u32 pp5c[NR_PORTS];
97 	/* Axi Cache Control Register */
98 	u32 axicc;
99 	bool is_cci_enabled;
100 	int flags;
101 };
102 
103 static unsigned int ceva_ahci_read_id(struct ata_device *dev,
104 					struct ata_taskfile *tf, u16 *id)
105 {
106 	u32 err_mask;
107 
108 	err_mask = ata_do_dev_read_id(dev, tf, id);
109 	if (err_mask)
110 		return err_mask;
111 	/*
112 	 * Since CEVA controller does not support device sleep feature, we
113 	 * need to clear DEVSLP (bit 8) in word78 of the IDENTIFY DEVICE data.
114 	 */
115 	id[ATA_ID_FEATURE_SUPP] &= cpu_to_le16(~(1 << 8));
116 
117 	return 0;
118 }
119 
120 static struct ata_port_operations ahci_ceva_ops = {
121 	.inherits = &ahci_platform_ops,
122 	.read_id = ceva_ahci_read_id,
123 };
124 
125 static const struct ata_port_info ahci_ceva_port_info = {
126 	.flags          = AHCI_FLAG_COMMON,
127 	.pio_mask       = ATA_PIO4,
128 	.udma_mask      = ATA_UDMA6,
129 	.port_ops	= &ahci_ceva_ops,
130 };
131 
132 static void ahci_ceva_setup(struct ahci_host_priv *hpriv)
133 {
134 	void __iomem *mmio = hpriv->mmio;
135 	struct ceva_ahci_priv *cevapriv = hpriv->plat_data;
136 	u32 tmp;
137 	int i;
138 
139 	/* Set AHCI Enable */
140 	tmp = readl(mmio + HOST_CTL);
141 	tmp |= HOST_AHCI_EN;
142 	writel(tmp, mmio + HOST_CTL);
143 
144 	for (i = 0; i < NR_PORTS; i++) {
145 		/* TPSS TPRS scalars, CISE and Port Addr */
146 		tmp = PCFG_TPSS_VAL | PCFG_TPRS_VAL | (PCFG_PAD_VAL + i);
147 		writel(tmp, mmio + AHCI_VEND_PCFG);
148 
149 		/*
150 		 * AXI Data bus width to 64
151 		 * Set Mem Addr Read, Write ID for data transfers
152 		 * Set Mem Addr Read ID, Write ID for non-data transfers
153 		 * Transfer limit to 72 DWord
154 		 */
155 		tmp = PAXIC_ADBW_BW64 | PAXIC_MAWIDD(i) | PAXIC_MARIDD(i) |
156 			PAXIC_MAWID(i) | PAXIC_MARID(i) | PAXIC_OTL;
157 		writel(tmp, mmio + AHCI_VEND_PAXIC);
158 
159 		/* Set AXI cache control register if CCi is enabled */
160 		if (cevapriv->is_cci_enabled) {
161 			tmp = readl(mmio + AHCI_VEND_AXICC);
162 			tmp |= AXICC_ARCA_VAL | AXICC_ARCF_VAL |
163 				AXICC_ARCH_VAL | AXICC_ARCP_VAL |
164 				AXICC_AWCFD_VAL | AXICC_AWCD_VAL |
165 				AXICC_AWCF_VAL;
166 			writel(tmp, mmio + AHCI_VEND_AXICC);
167 		}
168 
169 		/* Port Phy Cfg register enables */
170 		tmp = PPCFG_TTA | PPCFG_PSS_EN | PPCFG_ESDF_EN;
171 		writel(tmp, mmio + AHCI_VEND_PPCFG);
172 
173 		/* Phy Control OOB timing parameters COMINIT */
174 		writel(cevapriv->pp2c[i], mmio + AHCI_VEND_PP2C);
175 
176 		/* Phy Control OOB timing parameters COMWAKE */
177 		writel(cevapriv->pp3c[i], mmio + AHCI_VEND_PP3C);
178 
179 		/* Phy Control Burst timing setting */
180 		writel(cevapriv->pp4c[i], mmio + AHCI_VEND_PP4C);
181 
182 		/* Rate Change Timer and Retry Interval Timer setting */
183 		writel(cevapriv->pp5c[i], mmio + AHCI_VEND_PP5C);
184 
185 		/* Rx Watermark setting  */
186 		tmp = rx_watermark | PTC_RSVD;
187 		writel(tmp, mmio + AHCI_VEND_PTC);
188 
189 		/* Default to Gen 3 Speed and Gen 1 if Gen2 is broken */
190 		tmp = PORT_SCTL_SPD_GEN3 | PORT_SCTL_IPM;
191 		if (cevapriv->flags & CEVA_FLAG_BROKEN_GEN2)
192 			tmp = PORT_SCTL_SPD_GEN1 | PORT_SCTL_IPM;
193 		writel(tmp, mmio + PORT_SCR_CTL + PORT_BASE + PORT_OFFSET * i);
194 	}
195 }
196 
197 static struct scsi_host_template ahci_platform_sht = {
198 	AHCI_SHT(DRV_NAME),
199 };
200 
201 static int ceva_ahci_probe(struct platform_device *pdev)
202 {
203 	struct device_node *np = pdev->dev.of_node;
204 	struct device *dev = &pdev->dev;
205 	struct ahci_host_priv *hpriv;
206 	struct ceva_ahci_priv *cevapriv;
207 	enum dev_dma_attr attr;
208 	int rc;
209 
210 	cevapriv = devm_kzalloc(dev, sizeof(*cevapriv), GFP_KERNEL);
211 	if (!cevapriv)
212 		return -ENOMEM;
213 
214 	cevapriv->ahci_pdev = pdev;
215 
216 	hpriv = ahci_platform_get_resources(pdev);
217 	if (IS_ERR(hpriv))
218 		return PTR_ERR(hpriv);
219 
220 	rc = ahci_platform_enable_resources(hpriv);
221 	if (rc)
222 		return rc;
223 
224 	if (of_property_read_bool(np, "ceva,broken-gen2"))
225 		cevapriv->flags = CEVA_FLAG_BROKEN_GEN2;
226 
227 	/* Read OOB timing value for COMINIT from device-tree */
228 	if (of_property_read_u8_array(np, "ceva,p0-cominit-params",
229 					(u8 *)&cevapriv->pp2c[0], 4) < 0) {
230 		dev_warn(dev, "ceva,p0-cominit-params property not defined\n");
231 		return -EINVAL;
232 	}
233 
234 	if (of_property_read_u8_array(np, "ceva,p1-cominit-params",
235 					(u8 *)&cevapriv->pp2c[1], 4) < 0) {
236 		dev_warn(dev, "ceva,p1-cominit-params property not defined\n");
237 		return -EINVAL;
238 	}
239 
240 	/* Read OOB timing value for COMWAKE from device-tree*/
241 	if (of_property_read_u8_array(np, "ceva,p0-comwake-params",
242 					(u8 *)&cevapriv->pp3c[0], 4) < 0) {
243 		dev_warn(dev, "ceva,p0-comwake-params property not defined\n");
244 		return -EINVAL;
245 	}
246 
247 	if (of_property_read_u8_array(np, "ceva,p1-comwake-params",
248 					(u8 *)&cevapriv->pp3c[1], 4) < 0) {
249 		dev_warn(dev, "ceva,p1-comwake-params property not defined\n");
250 		return -EINVAL;
251 	}
252 
253 	/* Read phy BURST timing value from device-tree */
254 	if (of_property_read_u8_array(np, "ceva,p0-burst-params",
255 					(u8 *)&cevapriv->pp4c[0], 4) < 0) {
256 		dev_warn(dev, "ceva,p0-burst-params property not defined\n");
257 		return -EINVAL;
258 	}
259 
260 	if (of_property_read_u8_array(np, "ceva,p1-burst-params",
261 					(u8 *)&cevapriv->pp4c[1], 4) < 0) {
262 		dev_warn(dev, "ceva,p1-burst-params property not defined\n");
263 		return -EINVAL;
264 	}
265 
266 	/* Read phy RETRY interval timing value from device-tree */
267 	if (of_property_read_u16_array(np, "ceva,p0-retry-params",
268 					(u16 *)&cevapriv->pp5c[0], 2) < 0) {
269 		dev_warn(dev, "ceva,p0-retry-params property not defined\n");
270 		return -EINVAL;
271 	}
272 
273 	if (of_property_read_u16_array(np, "ceva,p1-retry-params",
274 					(u16 *)&cevapriv->pp5c[1], 2) < 0) {
275 		dev_warn(dev, "ceva,p1-retry-params property not defined\n");
276 		return -EINVAL;
277 	}
278 
279 	/*
280 	 * Check if CCI is enabled for SATA. The DEV_DMA_COHERENT is returned
281 	 * if CCI is enabled, so check for DEV_DMA_COHERENT.
282 	 */
283 	attr = device_get_dma_attr(dev);
284 	cevapriv->is_cci_enabled = (attr == DEV_DMA_COHERENT);
285 
286 	hpriv->plat_data = cevapriv;
287 
288 	/* CEVA specific initialization */
289 	ahci_ceva_setup(hpriv);
290 
291 	rc = ahci_platform_init_host(pdev, hpriv, &ahci_ceva_port_info,
292 					&ahci_platform_sht);
293 	if (rc)
294 		goto disable_resources;
295 
296 	return 0;
297 
298 disable_resources:
299 	ahci_platform_disable_resources(hpriv);
300 	return rc;
301 }
302 
303 static int __maybe_unused ceva_ahci_suspend(struct device *dev)
304 {
305 	return ahci_platform_suspend(dev);
306 }
307 
308 static int __maybe_unused ceva_ahci_resume(struct device *dev)
309 {
310 	struct ata_host *host = dev_get_drvdata(dev);
311 	struct ahci_host_priv *hpriv = host->private_data;
312 	int rc;
313 
314 	rc = ahci_platform_enable_resources(hpriv);
315 	if (rc)
316 		return rc;
317 
318 	/* Configure CEVA specific config before resuming HBA */
319 	ahci_ceva_setup(hpriv);
320 
321 	rc = ahci_platform_resume_host(dev);
322 	if (rc)
323 		goto disable_resources;
324 
325 	/* We resumed so update PM runtime state */
326 	pm_runtime_disable(dev);
327 	pm_runtime_set_active(dev);
328 	pm_runtime_enable(dev);
329 
330 	return 0;
331 
332 disable_resources:
333 	ahci_platform_disable_resources(hpriv);
334 
335 	return rc;
336 }
337 
338 static SIMPLE_DEV_PM_OPS(ahci_ceva_pm_ops, ceva_ahci_suspend, ceva_ahci_resume);
339 
340 static const struct of_device_id ceva_ahci_of_match[] = {
341 	{ .compatible = "ceva,ahci-1v84" },
342 	{},
343 };
344 MODULE_DEVICE_TABLE(of, ceva_ahci_of_match);
345 
346 static struct platform_driver ceva_ahci_driver = {
347 	.probe = ceva_ahci_probe,
348 	.remove = ata_platform_remove_one,
349 	.driver = {
350 		.name = DRV_NAME,
351 		.of_match_table = ceva_ahci_of_match,
352 		.pm = &ahci_ceva_pm_ops,
353 	},
354 };
355 module_platform_driver(ceva_ahci_driver);
356 
357 MODULE_DESCRIPTION("CEVA AHCI SATA platform driver");
358 MODULE_AUTHOR("Xilinx Inc.");
359 MODULE_LICENSE("GPL v2");
360