xref: /linux/drivers/bluetooth/bt3c_cs.c (revision 44f57d78)
1 /*
2  *
3  *  Driver for the 3Com Bluetooth PCMCIA card
4  *
5  *  Copyright (C) 2001-2002  Marcel Holtmann <marcel@holtmann.org>
6  *                           Jose Orlando Pereira <jop@di.uminho.pt>
7  *
8  *
9  *  This program is free software; you can redistribute it and/or modify
10  *  it under the terms of the GNU General Public License version 2 as
11  *  published by the Free Software Foundation;
12  *
13  *  Software distributed under the License is distributed on an "AS
14  *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
15  *  implied. See the License for the specific language governing
16  *  rights and limitations under the License.
17  *
18  *  The initial developer of the original code is David A. Hinds
19  *  <dahinds@users.sourceforge.net>.  Portions created by David A. Hinds
20  *  are Copyright (C) 1999 David A. Hinds.  All Rights Reserved.
21  *
22  */
23 
24 #include <linux/module.h>
25 
26 #include <linux/kernel.h>
27 #include <linux/init.h>
28 #include <linux/slab.h>
29 #include <linux/types.h>
30 #include <linux/delay.h>
31 #include <linux/errno.h>
32 #include <linux/ptrace.h>
33 #include <linux/ioport.h>
34 #include <linux/spinlock.h>
35 #include <linux/moduleparam.h>
36 
37 #include <linux/skbuff.h>
38 #include <linux/string.h>
39 #include <linux/serial.h>
40 #include <linux/serial_reg.h>
41 #include <linux/bitops.h>
42 #include <asm/io.h>
43 
44 #include <linux/device.h>
45 #include <linux/firmware.h>
46 
47 #include <pcmcia/cistpl.h>
48 #include <pcmcia/ciscode.h>
49 #include <pcmcia/ds.h>
50 #include <pcmcia/cisreg.h>
51 
52 #include <net/bluetooth/bluetooth.h>
53 #include <net/bluetooth/hci_core.h>
54 
55 
56 
57 /* ======================== Module parameters ======================== */
58 
59 
60 MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
61 MODULE_DESCRIPTION("Bluetooth driver for the 3Com Bluetooth PCMCIA card");
62 MODULE_LICENSE("GPL");
63 MODULE_FIRMWARE("BT3CPCC.bin");
64 
65 
66 
67 /* ======================== Local structures ======================== */
68 
69 
70 struct bt3c_info {
71 	struct pcmcia_device *p_dev;
72 
73 	struct hci_dev *hdev;
74 
75 	spinlock_t lock;		/* For serializing operations */
76 
77 	struct sk_buff_head txq;
78 	unsigned long tx_state;
79 
80 	unsigned long rx_state;
81 	unsigned long rx_count;
82 	struct sk_buff *rx_skb;
83 };
84 
85 
86 static int bt3c_config(struct pcmcia_device *link);
87 static void bt3c_release(struct pcmcia_device *link);
88 
89 static void bt3c_detach(struct pcmcia_device *p_dev);
90 
91 
92 /* Transmit states  */
93 #define XMIT_SENDING  1
94 #define XMIT_WAKEUP   2
95 #define XMIT_WAITING  8
96 
97 /* Receiver states */
98 #define RECV_WAIT_PACKET_TYPE   0
99 #define RECV_WAIT_EVENT_HEADER  1
100 #define RECV_WAIT_ACL_HEADER    2
101 #define RECV_WAIT_SCO_HEADER    3
102 #define RECV_WAIT_DATA          4
103 
104 
105 
106 /* ======================== Special I/O functions ======================== */
107 
108 
109 #define DATA_L   0
110 #define DATA_H   1
111 #define ADDR_L   2
112 #define ADDR_H   3
113 #define CONTROL  4
114 
115 
116 static inline void bt3c_address(unsigned int iobase, unsigned short addr)
117 {
118 	outb(addr & 0xff, iobase + ADDR_L);
119 	outb((addr >> 8) & 0xff, iobase + ADDR_H);
120 }
121 
122 
123 static inline void bt3c_put(unsigned int iobase, unsigned short value)
124 {
125 	outb(value & 0xff, iobase + DATA_L);
126 	outb((value >> 8) & 0xff, iobase + DATA_H);
127 }
128 
129 
130 static inline void bt3c_io_write(unsigned int iobase, unsigned short addr, unsigned short value)
131 {
132 	bt3c_address(iobase, addr);
133 	bt3c_put(iobase, value);
134 }
135 
136 
137 static inline unsigned short bt3c_get(unsigned int iobase)
138 {
139 	unsigned short value = inb(iobase + DATA_L);
140 
141 	value |= inb(iobase + DATA_H) << 8;
142 
143 	return value;
144 }
145 
146 
147 static inline unsigned short bt3c_read(unsigned int iobase, unsigned short addr)
148 {
149 	bt3c_address(iobase, addr);
150 
151 	return bt3c_get(iobase);
152 }
153 
154 
155 
156 /* ======================== Interrupt handling ======================== */
157 
158 
159 static int bt3c_write(unsigned int iobase, int fifo_size, __u8 *buf, int len)
160 {
161 	int actual = 0;
162 
163 	bt3c_address(iobase, 0x7080);
164 
165 	/* Fill FIFO with current frame */
166 	while (actual < len) {
167 		/* Transmit next byte */
168 		bt3c_put(iobase, buf[actual]);
169 		actual++;
170 	}
171 
172 	bt3c_io_write(iobase, 0x7005, actual);
173 
174 	return actual;
175 }
176 
177 
178 static void bt3c_write_wakeup(struct bt3c_info *info)
179 {
180 	if (!info) {
181 		BT_ERR("Unknown device");
182 		return;
183 	}
184 
185 	if (test_and_set_bit(XMIT_SENDING, &(info->tx_state)))
186 		return;
187 
188 	do {
189 		unsigned int iobase = info->p_dev->resource[0]->start;
190 		register struct sk_buff *skb;
191 		int len;
192 
193 		if (!pcmcia_dev_present(info->p_dev))
194 			break;
195 
196 		skb = skb_dequeue(&(info->txq));
197 		if (!skb) {
198 			clear_bit(XMIT_SENDING, &(info->tx_state));
199 			break;
200 		}
201 
202 		/* Send frame */
203 		len = bt3c_write(iobase, 256, skb->data, skb->len);
204 
205 		if (len != skb->len)
206 			BT_ERR("Very strange");
207 
208 		kfree_skb(skb);
209 
210 		info->hdev->stat.byte_tx += len;
211 
212 	} while (0);
213 }
214 
215 
216 static void bt3c_receive(struct bt3c_info *info)
217 {
218 	unsigned int iobase;
219 	int size = 0, avail;
220 
221 	if (!info) {
222 		BT_ERR("Unknown device");
223 		return;
224 	}
225 
226 	iobase = info->p_dev->resource[0]->start;
227 
228 	avail = bt3c_read(iobase, 0x7006);
229 
230 	bt3c_address(iobase, 0x7480);
231 	while (size < avail) {
232 		size++;
233 		info->hdev->stat.byte_rx++;
234 
235 		/* Allocate packet */
236 		if (!info->rx_skb) {
237 			info->rx_state = RECV_WAIT_PACKET_TYPE;
238 			info->rx_count = 0;
239 			info->rx_skb = bt_skb_alloc(HCI_MAX_FRAME_SIZE, GFP_ATOMIC);
240 			if (!info->rx_skb) {
241 				BT_ERR("Can't allocate mem for new packet");
242 				return;
243 			}
244 		}
245 
246 
247 		if (info->rx_state == RECV_WAIT_PACKET_TYPE) {
248 
249 			hci_skb_pkt_type(info->rx_skb) = inb(iobase + DATA_L);
250 			inb(iobase + DATA_H);
251 
252 			switch (hci_skb_pkt_type(info->rx_skb)) {
253 
254 			case HCI_EVENT_PKT:
255 				info->rx_state = RECV_WAIT_EVENT_HEADER;
256 				info->rx_count = HCI_EVENT_HDR_SIZE;
257 				break;
258 
259 			case HCI_ACLDATA_PKT:
260 				info->rx_state = RECV_WAIT_ACL_HEADER;
261 				info->rx_count = HCI_ACL_HDR_SIZE;
262 				break;
263 
264 			case HCI_SCODATA_PKT:
265 				info->rx_state = RECV_WAIT_SCO_HEADER;
266 				info->rx_count = HCI_SCO_HDR_SIZE;
267 				break;
268 
269 			default:
270 				/* Unknown packet */
271 				BT_ERR("Unknown HCI packet with type 0x%02x received",
272 				       hci_skb_pkt_type(info->rx_skb));
273 				info->hdev->stat.err_rx++;
274 
275 				kfree_skb(info->rx_skb);
276 				info->rx_skb = NULL;
277 				break;
278 
279 			}
280 
281 		} else {
282 
283 			__u8 x = inb(iobase + DATA_L);
284 
285 			skb_put_u8(info->rx_skb, x);
286 			inb(iobase + DATA_H);
287 			info->rx_count--;
288 
289 			if (info->rx_count == 0) {
290 
291 				int dlen;
292 				struct hci_event_hdr *eh;
293 				struct hci_acl_hdr *ah;
294 				struct hci_sco_hdr *sh;
295 
296 				switch (info->rx_state) {
297 
298 				case RECV_WAIT_EVENT_HEADER:
299 					eh = hci_event_hdr(info->rx_skb);
300 					info->rx_state = RECV_WAIT_DATA;
301 					info->rx_count = eh->plen;
302 					break;
303 
304 				case RECV_WAIT_ACL_HEADER:
305 					ah = hci_acl_hdr(info->rx_skb);
306 					dlen = __le16_to_cpu(ah->dlen);
307 					info->rx_state = RECV_WAIT_DATA;
308 					info->rx_count = dlen;
309 					break;
310 
311 				case RECV_WAIT_SCO_HEADER:
312 					sh = hci_sco_hdr(info->rx_skb);
313 					info->rx_state = RECV_WAIT_DATA;
314 					info->rx_count = sh->dlen;
315 					break;
316 
317 				case RECV_WAIT_DATA:
318 					hci_recv_frame(info->hdev, info->rx_skb);
319 					info->rx_skb = NULL;
320 					break;
321 
322 				}
323 
324 			}
325 
326 		}
327 
328 	}
329 
330 	bt3c_io_write(iobase, 0x7006, 0x0000);
331 }
332 
333 
334 static irqreturn_t bt3c_interrupt(int irq, void *dev_inst)
335 {
336 	struct bt3c_info *info = dev_inst;
337 	unsigned int iobase;
338 	int iir;
339 	irqreturn_t r = IRQ_NONE;
340 
341 	if (!info || !info->hdev)
342 		/* our irq handler is shared */
343 		return IRQ_NONE;
344 
345 	iobase = info->p_dev->resource[0]->start;
346 
347 	spin_lock(&(info->lock));
348 
349 	iir = inb(iobase + CONTROL);
350 	if (iir & 0x80) {
351 		int stat = bt3c_read(iobase, 0x7001);
352 
353 		if ((stat & 0xff) == 0x7f) {
354 			BT_ERR("Very strange (stat=0x%04x)", stat);
355 		} else if ((stat & 0xff) != 0xff) {
356 			if (stat & 0x0020) {
357 				int status = bt3c_read(iobase, 0x7002) & 0x10;
358 				bt_dev_info(info->hdev, "Antenna %s",
359 							status ? "out" : "in");
360 			}
361 			if (stat & 0x0001)
362 				bt3c_receive(info);
363 			if (stat & 0x0002) {
364 				clear_bit(XMIT_SENDING, &(info->tx_state));
365 				bt3c_write_wakeup(info);
366 			}
367 
368 			bt3c_io_write(iobase, 0x7001, 0x0000);
369 
370 			outb(iir, iobase + CONTROL);
371 		}
372 		r = IRQ_HANDLED;
373 	}
374 
375 	spin_unlock(&(info->lock));
376 
377 	return r;
378 }
379 
380 
381 
382 /* ======================== HCI interface ======================== */
383 
384 
385 static int bt3c_hci_flush(struct hci_dev *hdev)
386 {
387 	struct bt3c_info *info = hci_get_drvdata(hdev);
388 
389 	/* Drop TX queue */
390 	skb_queue_purge(&(info->txq));
391 
392 	return 0;
393 }
394 
395 
396 static int bt3c_hci_open(struct hci_dev *hdev)
397 {
398 	return 0;
399 }
400 
401 
402 static int bt3c_hci_close(struct hci_dev *hdev)
403 {
404 	bt3c_hci_flush(hdev);
405 
406 	return 0;
407 }
408 
409 
410 static int bt3c_hci_send_frame(struct hci_dev *hdev, struct sk_buff *skb)
411 {
412 	struct bt3c_info *info = hci_get_drvdata(hdev);
413 	unsigned long flags;
414 
415 	switch (hci_skb_pkt_type(skb)) {
416 	case HCI_COMMAND_PKT:
417 		hdev->stat.cmd_tx++;
418 		break;
419 	case HCI_ACLDATA_PKT:
420 		hdev->stat.acl_tx++;
421 		break;
422 	case HCI_SCODATA_PKT:
423 		hdev->stat.sco_tx++;
424 		break;
425 	}
426 
427 	/* Prepend skb with frame type */
428 	memcpy(skb_push(skb, 1), &hci_skb_pkt_type(skb), 1);
429 	skb_queue_tail(&(info->txq), skb);
430 
431 	spin_lock_irqsave(&(info->lock), flags);
432 
433 	bt3c_write_wakeup(info);
434 
435 	spin_unlock_irqrestore(&(info->lock), flags);
436 
437 	return 0;
438 }
439 
440 
441 
442 /* ======================== Card services HCI interaction ======================== */
443 
444 
445 static int bt3c_load_firmware(struct bt3c_info *info,
446 			      const unsigned char *firmware,
447 			      int count)
448 {
449 	char *ptr = (char *) firmware;
450 	char b[9];
451 	unsigned int iobase, tmp, tn;
452 	unsigned long size, addr, fcs;
453 	int i, err = 0;
454 
455 	iobase = info->p_dev->resource[0]->start;
456 
457 	/* Reset */
458 	bt3c_io_write(iobase, 0x8040, 0x0404);
459 	bt3c_io_write(iobase, 0x8040, 0x0400);
460 
461 	udelay(1);
462 
463 	bt3c_io_write(iobase, 0x8040, 0x0404);
464 
465 	udelay(17);
466 
467 	/* Load */
468 	while (count) {
469 		if (ptr[0] != 'S') {
470 			BT_ERR("Bad address in firmware");
471 			err = -EFAULT;
472 			goto error;
473 		}
474 
475 		memset(b, 0, sizeof(b));
476 		memcpy(b, ptr + 2, 2);
477 		if (kstrtoul(b, 16, &size) < 0)
478 			return -EINVAL;
479 
480 		memset(b, 0, sizeof(b));
481 		memcpy(b, ptr + 4, 8);
482 		if (kstrtoul(b, 16, &addr) < 0)
483 			return -EINVAL;
484 
485 		memset(b, 0, sizeof(b));
486 		memcpy(b, ptr + (size * 2) + 2, 2);
487 		if (kstrtoul(b, 16, &fcs) < 0)
488 			return -EINVAL;
489 
490 		memset(b, 0, sizeof(b));
491 		for (tmp = 0, i = 0; i < size; i++) {
492 			memcpy(b, ptr + (i * 2) + 2, 2);
493 			if (kstrtouint(b, 16, &tn))
494 				return -EINVAL;
495 			tmp += tn;
496 		}
497 
498 		if (((tmp + fcs) & 0xff) != 0xff) {
499 			BT_ERR("Checksum error in firmware");
500 			err = -EILSEQ;
501 			goto error;
502 		}
503 
504 		if (ptr[1] == '3') {
505 			bt3c_address(iobase, addr);
506 
507 			memset(b, 0, sizeof(b));
508 			for (i = 0; i < (size - 4) / 2; i++) {
509 				memcpy(b, ptr + (i * 4) + 12, 4);
510 				if (kstrtouint(b, 16, &tmp))
511 					return -EINVAL;
512 				bt3c_put(iobase, tmp);
513 			}
514 		}
515 
516 		ptr   += (size * 2) + 6;
517 		count -= (size * 2) + 6;
518 	}
519 
520 	udelay(17);
521 
522 	/* Boot */
523 	bt3c_address(iobase, 0x3000);
524 	outb(inb(iobase + CONTROL) | 0x40, iobase + CONTROL);
525 
526 error:
527 	udelay(17);
528 
529 	/* Clear */
530 	bt3c_io_write(iobase, 0x7006, 0x0000);
531 	bt3c_io_write(iobase, 0x7005, 0x0000);
532 	bt3c_io_write(iobase, 0x7001, 0x0000);
533 
534 	return err;
535 }
536 
537 
538 static int bt3c_open(struct bt3c_info *info)
539 {
540 	const struct firmware *firmware;
541 	struct hci_dev *hdev;
542 	int err;
543 
544 	spin_lock_init(&(info->lock));
545 
546 	skb_queue_head_init(&(info->txq));
547 
548 	info->rx_state = RECV_WAIT_PACKET_TYPE;
549 	info->rx_count = 0;
550 	info->rx_skb = NULL;
551 
552 	/* Initialize HCI device */
553 	hdev = hci_alloc_dev();
554 	if (!hdev) {
555 		BT_ERR("Can't allocate HCI device");
556 		return -ENOMEM;
557 	}
558 
559 	info->hdev = hdev;
560 
561 	hdev->bus = HCI_PCCARD;
562 	hci_set_drvdata(hdev, info);
563 	SET_HCIDEV_DEV(hdev, &info->p_dev->dev);
564 
565 	hdev->open  = bt3c_hci_open;
566 	hdev->close = bt3c_hci_close;
567 	hdev->flush = bt3c_hci_flush;
568 	hdev->send  = bt3c_hci_send_frame;
569 
570 	/* Load firmware */
571 	err = request_firmware(&firmware, "BT3CPCC.bin", &info->p_dev->dev);
572 	if (err < 0) {
573 		BT_ERR("Firmware request failed");
574 		goto error;
575 	}
576 
577 	err = bt3c_load_firmware(info, firmware->data, firmware->size);
578 
579 	release_firmware(firmware);
580 
581 	if (err < 0) {
582 		BT_ERR("Firmware loading failed");
583 		goto error;
584 	}
585 
586 	/* Timeout before it is safe to send the first HCI packet */
587 	msleep(1000);
588 
589 	/* Register HCI device */
590 	err = hci_register_dev(hdev);
591 	if (err < 0) {
592 		BT_ERR("Can't register HCI device");
593 		goto error;
594 	}
595 
596 	return 0;
597 
598 error:
599 	info->hdev = NULL;
600 	hci_free_dev(hdev);
601 	return err;
602 }
603 
604 
605 static int bt3c_close(struct bt3c_info *info)
606 {
607 	struct hci_dev *hdev = info->hdev;
608 
609 	if (!hdev)
610 		return -ENODEV;
611 
612 	bt3c_hci_close(hdev);
613 
614 	hci_unregister_dev(hdev);
615 	hci_free_dev(hdev);
616 
617 	return 0;
618 }
619 
620 static int bt3c_probe(struct pcmcia_device *link)
621 {
622 	struct bt3c_info *info;
623 
624 	/* Create new info device */
625 	info = devm_kzalloc(&link->dev, sizeof(*info), GFP_KERNEL);
626 	if (!info)
627 		return -ENOMEM;
628 
629 	info->p_dev = link;
630 	link->priv = info;
631 
632 	link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_VPP |
633 		CONF_AUTO_SET_IO;
634 
635 	return bt3c_config(link);
636 }
637 
638 
639 static void bt3c_detach(struct pcmcia_device *link)
640 {
641 	bt3c_release(link);
642 }
643 
644 static int bt3c_check_config(struct pcmcia_device *p_dev, void *priv_data)
645 {
646 	int *try = priv_data;
647 
648 	if (!try)
649 		p_dev->io_lines = 16;
650 
651 	if ((p_dev->resource[0]->end != 8) || (p_dev->resource[0]->start == 0))
652 		return -EINVAL;
653 
654 	p_dev->resource[0]->end = 8;
655 	p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
656 	p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
657 
658 	return pcmcia_request_io(p_dev);
659 }
660 
661 static int bt3c_check_config_notpicky(struct pcmcia_device *p_dev,
662 				      void *priv_data)
663 {
664 	static unsigned int base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 };
665 	int j;
666 
667 	if (p_dev->io_lines > 3)
668 		return -ENODEV;
669 
670 	p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
671 	p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
672 	p_dev->resource[0]->end = 8;
673 
674 	for (j = 0; j < 5; j++) {
675 		p_dev->resource[0]->start = base[j];
676 		p_dev->io_lines = base[j] ? 16 : 3;
677 		if (!pcmcia_request_io(p_dev))
678 			return 0;
679 	}
680 	return -ENODEV;
681 }
682 
683 static int bt3c_config(struct pcmcia_device *link)
684 {
685 	struct bt3c_info *info = link->priv;
686 	int i;
687 	unsigned long try;
688 
689 	/* First pass: look for a config entry that looks normal.
690 	 * Two tries: without IO aliases, then with aliases
691 	 */
692 	for (try = 0; try < 2; try++)
693 		if (!pcmcia_loop_config(link, bt3c_check_config, (void *) try))
694 			goto found_port;
695 
696 	/* Second pass: try to find an entry that isn't picky about
697 	 * its base address, then try to grab any standard serial port
698 	 * address, and finally try to get any free port.
699 	 */
700 	if (!pcmcia_loop_config(link, bt3c_check_config_notpicky, NULL))
701 		goto found_port;
702 
703 	BT_ERR("No usable port range found");
704 	goto failed;
705 
706 found_port:
707 	i = pcmcia_request_irq(link, &bt3c_interrupt);
708 	if (i != 0)
709 		goto failed;
710 
711 	i = pcmcia_enable_device(link);
712 	if (i != 0)
713 		goto failed;
714 
715 	if (bt3c_open(info) != 0)
716 		goto failed;
717 
718 	return 0;
719 
720 failed:
721 	bt3c_release(link);
722 	return -ENODEV;
723 }
724 
725 
726 static void bt3c_release(struct pcmcia_device *link)
727 {
728 	struct bt3c_info *info = link->priv;
729 
730 	bt3c_close(info);
731 
732 	pcmcia_disable_device(link);
733 }
734 
735 
736 static const struct pcmcia_device_id bt3c_ids[] = {
737 	PCMCIA_DEVICE_PROD_ID13("3COM", "Bluetooth PC Card", 0xefce0a31, 0xd4ce9b02),
738 	PCMCIA_DEVICE_NULL
739 };
740 MODULE_DEVICE_TABLE(pcmcia, bt3c_ids);
741 
742 static struct pcmcia_driver bt3c_driver = {
743 	.owner		= THIS_MODULE,
744 	.name		= "bt3c_cs",
745 	.probe		= bt3c_probe,
746 	.remove		= bt3c_detach,
747 	.id_table	= bt3c_ids,
748 };
749 module_pcmcia_driver(bt3c_driver);
750