1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 * 4 * Bluetooth HCI UART driver 5 * 6 * Copyright (C) 2000-2001 Qualcomm Incorporated 7 * Copyright (C) 2002-2003 Maxim Krasnyansky <maxk@qualcomm.com> 8 * Copyright (C) 2004-2005 Marcel Holtmann <marcel@holtmann.org> 9 */ 10 11 #include <linux/module.h> 12 13 #include <linux/kernel.h> 14 #include <linux/init.h> 15 #include <linux/types.h> 16 #include <linux/fcntl.h> 17 #include <linux/interrupt.h> 18 #include <linux/ptrace.h> 19 #include <linux/poll.h> 20 21 #include <linux/slab.h> 22 #include <linux/tty.h> 23 #include <linux/errno.h> 24 #include <linux/string.h> 25 #include <linux/signal.h> 26 #include <linux/ioctl.h> 27 #include <linux/skbuff.h> 28 #include <linux/firmware.h> 29 #include <linux/serdev.h> 30 31 #include <net/bluetooth/bluetooth.h> 32 #include <net/bluetooth/hci_core.h> 33 34 #include "btintel.h" 35 #include "btbcm.h" 36 #include "hci_uart.h" 37 38 #define VERSION "2.3" 39 40 static const struct hci_uart_proto *hup[HCI_UART_MAX_PROTO]; 41 42 int hci_uart_register_proto(const struct hci_uart_proto *p) 43 { 44 if (p->id >= HCI_UART_MAX_PROTO) 45 return -EINVAL; 46 47 if (hup[p->id]) 48 return -EEXIST; 49 50 hup[p->id] = p; 51 52 BT_INFO("HCI UART protocol %s registered", p->name); 53 54 return 0; 55 } 56 57 int hci_uart_unregister_proto(const struct hci_uart_proto *p) 58 { 59 if (p->id >= HCI_UART_MAX_PROTO) 60 return -EINVAL; 61 62 if (!hup[p->id]) 63 return -EINVAL; 64 65 hup[p->id] = NULL; 66 67 return 0; 68 } 69 70 static const struct hci_uart_proto *hci_uart_get_proto(unsigned int id) 71 { 72 if (id >= HCI_UART_MAX_PROTO) 73 return NULL; 74 75 return hup[id]; 76 } 77 78 static inline void hci_uart_tx_complete(struct hci_uart *hu, int pkt_type) 79 { 80 struct hci_dev *hdev = hu->hdev; 81 82 /* Update HCI stat counters */ 83 switch (pkt_type) { 84 case HCI_COMMAND_PKT: 85 hdev->stat.cmd_tx++; 86 break; 87 88 case HCI_ACLDATA_PKT: 89 hdev->stat.acl_tx++; 90 break; 91 92 case HCI_SCODATA_PKT: 93 hdev->stat.sco_tx++; 94 break; 95 } 96 } 97 98 static inline struct sk_buff *hci_uart_dequeue(struct hci_uart *hu) 99 { 100 struct sk_buff *skb = hu->tx_skb; 101 102 if (!skb) { 103 percpu_down_read(&hu->proto_lock); 104 105 if (test_bit(HCI_UART_PROTO_READY, &hu->flags)) 106 skb = hu->proto->dequeue(hu); 107 108 percpu_up_read(&hu->proto_lock); 109 } else { 110 hu->tx_skb = NULL; 111 } 112 113 return skb; 114 } 115 116 int hci_uart_tx_wakeup(struct hci_uart *hu) 117 { 118 /* This may be called in an IRQ context, so we can't sleep. Therefore 119 * we try to acquire the lock only, and if that fails we assume the 120 * tty is being closed because that is the only time the write lock is 121 * acquired. If, however, at some point in the future the write lock 122 * is also acquired in other situations, then this must be revisited. 123 */ 124 if (!percpu_down_read_trylock(&hu->proto_lock)) 125 return 0; 126 127 if (!test_bit(HCI_UART_PROTO_READY, &hu->flags)) 128 goto no_schedule; 129 130 set_bit(HCI_UART_TX_WAKEUP, &hu->tx_state); 131 if (test_and_set_bit(HCI_UART_SENDING, &hu->tx_state)) 132 goto no_schedule; 133 134 BT_DBG(""); 135 136 schedule_work(&hu->write_work); 137 138 no_schedule: 139 percpu_up_read(&hu->proto_lock); 140 141 return 0; 142 } 143 EXPORT_SYMBOL_GPL(hci_uart_tx_wakeup); 144 145 static void hci_uart_write_work(struct work_struct *work) 146 { 147 struct hci_uart *hu = container_of(work, struct hci_uart, write_work); 148 struct tty_struct *tty = hu->tty; 149 struct hci_dev *hdev = hu->hdev; 150 struct sk_buff *skb; 151 152 /* REVISIT: should we cope with bad skbs or ->write() returning 153 * and error value ? 154 */ 155 156 restart: 157 clear_bit(HCI_UART_TX_WAKEUP, &hu->tx_state); 158 159 while ((skb = hci_uart_dequeue(hu))) { 160 int len; 161 162 set_bit(TTY_DO_WRITE_WAKEUP, &tty->flags); 163 len = tty->ops->write(tty, skb->data, skb->len); 164 hdev->stat.byte_tx += len; 165 166 skb_pull(skb, len); 167 if (skb->len) { 168 hu->tx_skb = skb; 169 break; 170 } 171 172 hci_uart_tx_complete(hu, hci_skb_pkt_type(skb)); 173 kfree_skb(skb); 174 } 175 176 clear_bit(HCI_UART_SENDING, &hu->tx_state); 177 if (test_bit(HCI_UART_TX_WAKEUP, &hu->tx_state)) 178 goto restart; 179 180 wake_up_bit(&hu->tx_state, HCI_UART_SENDING); 181 } 182 183 void hci_uart_init_work(struct work_struct *work) 184 { 185 struct hci_uart *hu = container_of(work, struct hci_uart, init_ready); 186 int err; 187 struct hci_dev *hdev; 188 189 if (!test_and_clear_bit(HCI_UART_INIT_PENDING, &hu->hdev_flags)) 190 return; 191 192 err = hci_register_dev(hu->hdev); 193 if (err < 0) { 194 BT_ERR("Can't register HCI device"); 195 clear_bit(HCI_UART_PROTO_READY, &hu->flags); 196 hu->proto->close(hu); 197 hdev = hu->hdev; 198 hu->hdev = NULL; 199 hci_free_dev(hdev); 200 return; 201 } 202 203 set_bit(HCI_UART_REGISTERED, &hu->flags); 204 } 205 206 int hci_uart_init_ready(struct hci_uart *hu) 207 { 208 if (!test_bit(HCI_UART_INIT_PENDING, &hu->hdev_flags)) 209 return -EALREADY; 210 211 schedule_work(&hu->init_ready); 212 213 return 0; 214 } 215 216 int hci_uart_wait_until_sent(struct hci_uart *hu) 217 { 218 return wait_on_bit_timeout(&hu->tx_state, HCI_UART_SENDING, 219 TASK_INTERRUPTIBLE, 220 msecs_to_jiffies(2000)); 221 } 222 223 /* ------- Interface to HCI layer ------ */ 224 /* Reset device */ 225 static int hci_uart_flush(struct hci_dev *hdev) 226 { 227 struct hci_uart *hu = hci_get_drvdata(hdev); 228 struct tty_struct *tty = hu->tty; 229 230 BT_DBG("hdev %p tty %p", hdev, tty); 231 232 if (hu->tx_skb) { 233 kfree_skb(hu->tx_skb); hu->tx_skb = NULL; 234 } 235 236 /* Flush any pending characters in the driver and discipline. */ 237 tty_ldisc_flush(tty); 238 tty_driver_flush_buffer(tty); 239 240 percpu_down_read(&hu->proto_lock); 241 242 if (test_bit(HCI_UART_PROTO_READY, &hu->flags)) 243 hu->proto->flush(hu); 244 245 percpu_up_read(&hu->proto_lock); 246 247 return 0; 248 } 249 250 /* Initialize device */ 251 static int hci_uart_open(struct hci_dev *hdev) 252 { 253 BT_DBG("%s %p", hdev->name, hdev); 254 255 /* Undo clearing this from hci_uart_close() */ 256 hdev->flush = hci_uart_flush; 257 258 return 0; 259 } 260 261 /* Close device */ 262 static int hci_uart_close(struct hci_dev *hdev) 263 { 264 BT_DBG("hdev %p", hdev); 265 266 hci_uart_flush(hdev); 267 hdev->flush = NULL; 268 return 0; 269 } 270 271 /* Send frames from HCI layer */ 272 static int hci_uart_send_frame(struct hci_dev *hdev, struct sk_buff *skb) 273 { 274 struct hci_uart *hu = hci_get_drvdata(hdev); 275 276 BT_DBG("%s: type %d len %d", hdev->name, hci_skb_pkt_type(skb), 277 skb->len); 278 279 percpu_down_read(&hu->proto_lock); 280 281 if (!test_bit(HCI_UART_PROTO_READY, &hu->flags)) { 282 percpu_up_read(&hu->proto_lock); 283 return -EUNATCH; 284 } 285 286 hu->proto->enqueue(hu, skb); 287 percpu_up_read(&hu->proto_lock); 288 289 hci_uart_tx_wakeup(hu); 290 291 return 0; 292 } 293 294 /* Check the underlying device or tty has flow control support */ 295 bool hci_uart_has_flow_control(struct hci_uart *hu) 296 { 297 /* serdev nodes check if the needed operations are present */ 298 if (hu->serdev) 299 return true; 300 301 if (hu->tty->driver->ops->tiocmget && hu->tty->driver->ops->tiocmset) 302 return true; 303 304 return false; 305 } 306 307 /* Flow control or un-flow control the device */ 308 void hci_uart_set_flow_control(struct hci_uart *hu, bool enable) 309 { 310 struct tty_struct *tty = hu->tty; 311 struct ktermios ktermios; 312 int status; 313 unsigned int set = 0; 314 unsigned int clear = 0; 315 316 if (hu->serdev) { 317 serdev_device_set_flow_control(hu->serdev, !enable); 318 serdev_device_set_rts(hu->serdev, !enable); 319 return; 320 } 321 322 if (enable) { 323 /* Disable hardware flow control */ 324 ktermios = tty->termios; 325 ktermios.c_cflag &= ~CRTSCTS; 326 status = tty_set_termios(tty, &ktermios); 327 BT_DBG("Disabling hardware flow control: %s", 328 status ? "failed" : "success"); 329 330 /* Clear RTS to prevent the device from sending */ 331 /* Most UARTs need OUT2 to enable interrupts */ 332 status = tty->driver->ops->tiocmget(tty); 333 BT_DBG("Current tiocm 0x%x", status); 334 335 set &= ~(TIOCM_OUT2 | TIOCM_RTS); 336 clear = ~set; 337 set &= TIOCM_DTR | TIOCM_RTS | TIOCM_OUT1 | 338 TIOCM_OUT2 | TIOCM_LOOP; 339 clear &= TIOCM_DTR | TIOCM_RTS | TIOCM_OUT1 | 340 TIOCM_OUT2 | TIOCM_LOOP; 341 status = tty->driver->ops->tiocmset(tty, set, clear); 342 BT_DBG("Clearing RTS: %s", status ? "failed" : "success"); 343 } else { 344 /* Set RTS to allow the device to send again */ 345 status = tty->driver->ops->tiocmget(tty); 346 BT_DBG("Current tiocm 0x%x", status); 347 348 set |= (TIOCM_OUT2 | TIOCM_RTS); 349 clear = ~set; 350 set &= TIOCM_DTR | TIOCM_RTS | TIOCM_OUT1 | 351 TIOCM_OUT2 | TIOCM_LOOP; 352 clear &= TIOCM_DTR | TIOCM_RTS | TIOCM_OUT1 | 353 TIOCM_OUT2 | TIOCM_LOOP; 354 status = tty->driver->ops->tiocmset(tty, set, clear); 355 BT_DBG("Setting RTS: %s", status ? "failed" : "success"); 356 357 /* Re-enable hardware flow control */ 358 ktermios = tty->termios; 359 ktermios.c_cflag |= CRTSCTS; 360 status = tty_set_termios(tty, &ktermios); 361 BT_DBG("Enabling hardware flow control: %s", 362 status ? "failed" : "success"); 363 } 364 } 365 366 void hci_uart_set_speeds(struct hci_uart *hu, unsigned int init_speed, 367 unsigned int oper_speed) 368 { 369 hu->init_speed = init_speed; 370 hu->oper_speed = oper_speed; 371 } 372 373 void hci_uart_set_baudrate(struct hci_uart *hu, unsigned int speed) 374 { 375 struct tty_struct *tty = hu->tty; 376 struct ktermios ktermios; 377 378 ktermios = tty->termios; 379 ktermios.c_cflag &= ~CBAUD; 380 tty_termios_encode_baud_rate(&ktermios, speed, speed); 381 382 /* tty_set_termios() return not checked as it is always 0 */ 383 tty_set_termios(tty, &ktermios); 384 385 BT_DBG("%s: New tty speeds: %d/%d", hu->hdev->name, 386 tty->termios.c_ispeed, tty->termios.c_ospeed); 387 } 388 389 static int hci_uart_setup(struct hci_dev *hdev) 390 { 391 struct hci_uart *hu = hci_get_drvdata(hdev); 392 struct hci_rp_read_local_version *ver; 393 struct sk_buff *skb; 394 unsigned int speed; 395 int err; 396 397 /* Init speed if any */ 398 if (hu->init_speed) 399 speed = hu->init_speed; 400 else if (hu->proto->init_speed) 401 speed = hu->proto->init_speed; 402 else 403 speed = 0; 404 405 if (speed) 406 hci_uart_set_baudrate(hu, speed); 407 408 /* Operational speed if any */ 409 if (hu->oper_speed) 410 speed = hu->oper_speed; 411 else if (hu->proto->oper_speed) 412 speed = hu->proto->oper_speed; 413 else 414 speed = 0; 415 416 if (hu->proto->set_baudrate && speed) { 417 err = hu->proto->set_baudrate(hu, speed); 418 if (!err) 419 hci_uart_set_baudrate(hu, speed); 420 } 421 422 if (hu->proto->setup) 423 return hu->proto->setup(hu); 424 425 if (!test_bit(HCI_UART_VND_DETECT, &hu->hdev_flags)) 426 return 0; 427 428 skb = __hci_cmd_sync(hdev, HCI_OP_READ_LOCAL_VERSION, 0, NULL, 429 HCI_INIT_TIMEOUT); 430 if (IS_ERR(skb)) { 431 BT_ERR("%s: Reading local version information failed (%ld)", 432 hdev->name, PTR_ERR(skb)); 433 return 0; 434 } 435 436 if (skb->len != sizeof(*ver)) { 437 BT_ERR("%s: Event length mismatch for version information", 438 hdev->name); 439 goto done; 440 } 441 442 ver = (struct hci_rp_read_local_version *)skb->data; 443 444 switch (le16_to_cpu(ver->manufacturer)) { 445 #ifdef CONFIG_BT_HCIUART_INTEL 446 case 2: 447 hdev->set_bdaddr = btintel_set_bdaddr; 448 btintel_check_bdaddr(hdev); 449 break; 450 #endif 451 #ifdef CONFIG_BT_HCIUART_BCM 452 case 15: 453 hdev->set_bdaddr = btbcm_set_bdaddr; 454 btbcm_check_bdaddr(hdev); 455 break; 456 #endif 457 default: 458 break; 459 } 460 461 done: 462 kfree_skb(skb); 463 return 0; 464 } 465 466 /* ------ LDISC part ------ */ 467 /* hci_uart_tty_open 468 * 469 * Called when line discipline changed to HCI_UART. 470 * 471 * Arguments: 472 * tty pointer to tty info structure 473 * Return Value: 474 * 0 if success, otherwise error code 475 */ 476 static int hci_uart_tty_open(struct tty_struct *tty) 477 { 478 struct hci_uart *hu; 479 480 BT_DBG("tty %p", tty); 481 482 if (!capable(CAP_NET_ADMIN)) 483 return -EPERM; 484 485 /* Error if the tty has no write op instead of leaving an exploitable 486 * hole 487 */ 488 if (tty->ops->write == NULL) 489 return -EOPNOTSUPP; 490 491 hu = kzalloc(sizeof(struct hci_uart), GFP_KERNEL); 492 if (!hu) { 493 BT_ERR("Can't allocate control structure"); 494 return -ENFILE; 495 } 496 497 tty->disc_data = hu; 498 hu->tty = tty; 499 tty->receive_room = 65536; 500 501 /* disable alignment support by default */ 502 hu->alignment = 1; 503 hu->padding = 0; 504 505 INIT_WORK(&hu->init_ready, hci_uart_init_work); 506 INIT_WORK(&hu->write_work, hci_uart_write_work); 507 508 percpu_init_rwsem(&hu->proto_lock); 509 510 /* Flush any pending characters in the driver */ 511 tty_driver_flush_buffer(tty); 512 513 return 0; 514 } 515 516 /* hci_uart_tty_close() 517 * 518 * Called when the line discipline is changed to something 519 * else, the tty is closed, or the tty detects a hangup. 520 */ 521 static void hci_uart_tty_close(struct tty_struct *tty) 522 { 523 struct hci_uart *hu = tty->disc_data; 524 struct hci_dev *hdev; 525 526 BT_DBG("tty %p", tty); 527 528 /* Detach from the tty */ 529 tty->disc_data = NULL; 530 531 if (!hu) 532 return; 533 534 hdev = hu->hdev; 535 if (hdev) 536 hci_uart_close(hdev); 537 538 if (test_bit(HCI_UART_PROTO_READY, &hu->flags)) { 539 percpu_down_write(&hu->proto_lock); 540 clear_bit(HCI_UART_PROTO_READY, &hu->flags); 541 percpu_up_write(&hu->proto_lock); 542 543 cancel_work_sync(&hu->init_ready); 544 cancel_work_sync(&hu->write_work); 545 546 if (hdev) { 547 if (test_bit(HCI_UART_REGISTERED, &hu->flags)) 548 hci_unregister_dev(hdev); 549 hci_free_dev(hdev); 550 } 551 hu->proto->close(hu); 552 } 553 clear_bit(HCI_UART_PROTO_SET, &hu->flags); 554 555 percpu_free_rwsem(&hu->proto_lock); 556 557 kfree(hu); 558 } 559 560 /* hci_uart_tty_wakeup() 561 * 562 * Callback for transmit wakeup. Called when low level 563 * device driver can accept more send data. 564 * 565 * Arguments: tty pointer to associated tty instance data 566 * Return Value: None 567 */ 568 static void hci_uart_tty_wakeup(struct tty_struct *tty) 569 { 570 struct hci_uart *hu = tty->disc_data; 571 572 BT_DBG(""); 573 574 if (!hu) 575 return; 576 577 clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags); 578 579 if (tty != hu->tty) 580 return; 581 582 if (test_bit(HCI_UART_PROTO_READY, &hu->flags)) 583 hci_uart_tx_wakeup(hu); 584 } 585 586 /* hci_uart_tty_receive() 587 * 588 * Called by tty low level driver when receive data is 589 * available. 590 * 591 * Arguments: tty pointer to tty isntance data 592 * data pointer to received data 593 * flags pointer to flags for data 594 * count count of received data in bytes 595 * 596 * Return Value: None 597 */ 598 static void hci_uart_tty_receive(struct tty_struct *tty, const u8 *data, 599 const char *flags, int count) 600 { 601 struct hci_uart *hu = tty->disc_data; 602 603 if (!hu || tty != hu->tty) 604 return; 605 606 percpu_down_read(&hu->proto_lock); 607 608 if (!test_bit(HCI_UART_PROTO_READY, &hu->flags)) { 609 percpu_up_read(&hu->proto_lock); 610 return; 611 } 612 613 /* It does not need a lock here as it is already protected by a mutex in 614 * tty caller 615 */ 616 hu->proto->recv(hu, data, count); 617 percpu_up_read(&hu->proto_lock); 618 619 if (hu->hdev) 620 hu->hdev->stat.byte_rx += count; 621 622 tty_unthrottle(tty); 623 } 624 625 static int hci_uart_register_dev(struct hci_uart *hu) 626 { 627 struct hci_dev *hdev; 628 int err; 629 630 BT_DBG(""); 631 632 /* Initialize and register HCI device */ 633 hdev = hci_alloc_dev(); 634 if (!hdev) { 635 BT_ERR("Can't allocate HCI device"); 636 return -ENOMEM; 637 } 638 639 hu->hdev = hdev; 640 641 hdev->bus = HCI_UART; 642 hci_set_drvdata(hdev, hu); 643 644 /* Only when vendor specific setup callback is provided, consider 645 * the manufacturer information valid. This avoids filling in the 646 * value for Ericsson when nothing is specified. 647 */ 648 if (hu->proto->setup) 649 hdev->manufacturer = hu->proto->manufacturer; 650 651 hdev->open = hci_uart_open; 652 hdev->close = hci_uart_close; 653 hdev->flush = hci_uart_flush; 654 hdev->send = hci_uart_send_frame; 655 hdev->setup = hci_uart_setup; 656 SET_HCIDEV_DEV(hdev, hu->tty->dev); 657 658 if (test_bit(HCI_UART_RAW_DEVICE, &hu->hdev_flags)) 659 set_bit(HCI_QUIRK_RAW_DEVICE, &hdev->quirks); 660 661 if (test_bit(HCI_UART_EXT_CONFIG, &hu->hdev_flags)) 662 set_bit(HCI_QUIRK_EXTERNAL_CONFIG, &hdev->quirks); 663 664 if (!test_bit(HCI_UART_RESET_ON_INIT, &hu->hdev_flags)) 665 set_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks); 666 667 if (test_bit(HCI_UART_CREATE_AMP, &hu->hdev_flags)) 668 hdev->dev_type = HCI_AMP; 669 else 670 hdev->dev_type = HCI_PRIMARY; 671 672 /* Only call open() for the protocol after hdev is fully initialized as 673 * open() (or a timer/workqueue it starts) may attempt to reference it. 674 */ 675 err = hu->proto->open(hu); 676 if (err) { 677 hu->hdev = NULL; 678 hci_free_dev(hdev); 679 return err; 680 } 681 682 if (test_bit(HCI_UART_INIT_PENDING, &hu->hdev_flags)) 683 return 0; 684 685 if (hci_register_dev(hdev) < 0) { 686 BT_ERR("Can't register HCI device"); 687 hu->proto->close(hu); 688 hu->hdev = NULL; 689 hci_free_dev(hdev); 690 return -ENODEV; 691 } 692 693 set_bit(HCI_UART_REGISTERED, &hu->flags); 694 695 return 0; 696 } 697 698 static int hci_uart_set_proto(struct hci_uart *hu, int id) 699 { 700 const struct hci_uart_proto *p; 701 int err; 702 703 p = hci_uart_get_proto(id); 704 if (!p) 705 return -EPROTONOSUPPORT; 706 707 hu->proto = p; 708 709 err = hci_uart_register_dev(hu); 710 if (err) { 711 return err; 712 } 713 714 set_bit(HCI_UART_PROTO_READY, &hu->flags); 715 return 0; 716 } 717 718 static int hci_uart_set_flags(struct hci_uart *hu, unsigned long flags) 719 { 720 unsigned long valid_flags = BIT(HCI_UART_RAW_DEVICE) | 721 BIT(HCI_UART_RESET_ON_INIT) | 722 BIT(HCI_UART_CREATE_AMP) | 723 BIT(HCI_UART_INIT_PENDING) | 724 BIT(HCI_UART_EXT_CONFIG) | 725 BIT(HCI_UART_VND_DETECT); 726 727 if (flags & ~valid_flags) 728 return -EINVAL; 729 730 hu->hdev_flags = flags; 731 732 return 0; 733 } 734 735 /* hci_uart_tty_ioctl() 736 * 737 * Process IOCTL system call for the tty device. 738 * 739 * Arguments: 740 * 741 * tty pointer to tty instance data 742 * cmd IOCTL command code 743 * arg argument for IOCTL call (cmd dependent) 744 * 745 * Return Value: Command dependent 746 */ 747 static int hci_uart_tty_ioctl(struct tty_struct *tty, unsigned int cmd, 748 unsigned long arg) 749 { 750 struct hci_uart *hu = tty->disc_data; 751 int err = 0; 752 753 BT_DBG(""); 754 755 /* Verify the status of the device */ 756 if (!hu) 757 return -EBADF; 758 759 switch (cmd) { 760 case HCIUARTSETPROTO: 761 if (!test_and_set_bit(HCI_UART_PROTO_SET, &hu->flags)) { 762 err = hci_uart_set_proto(hu, arg); 763 if (err) 764 clear_bit(HCI_UART_PROTO_SET, &hu->flags); 765 } else 766 err = -EBUSY; 767 break; 768 769 case HCIUARTGETPROTO: 770 if (test_bit(HCI_UART_PROTO_SET, &hu->flags)) 771 err = hu->proto->id; 772 else 773 err = -EUNATCH; 774 break; 775 776 case HCIUARTGETDEVICE: 777 if (test_bit(HCI_UART_REGISTERED, &hu->flags)) 778 err = hu->hdev->id; 779 else 780 err = -EUNATCH; 781 break; 782 783 case HCIUARTSETFLAGS: 784 if (test_bit(HCI_UART_PROTO_SET, &hu->flags)) 785 err = -EBUSY; 786 else 787 err = hci_uart_set_flags(hu, arg); 788 break; 789 790 case HCIUARTGETFLAGS: 791 err = hu->hdev_flags; 792 break; 793 794 default: 795 err = n_tty_ioctl_helper(tty, cmd, arg); 796 break; 797 } 798 799 return err; 800 } 801 802 /* 803 * We don't provide read/write/poll interface for user space. 804 */ 805 static ssize_t hci_uart_tty_read(struct tty_struct *tty, struct file *file, 806 unsigned char *buf, size_t nr, 807 void **cookie, unsigned long offset) 808 { 809 return 0; 810 } 811 812 static ssize_t hci_uart_tty_write(struct tty_struct *tty, struct file *file, 813 const unsigned char *data, size_t count) 814 { 815 return 0; 816 } 817 818 static __poll_t hci_uart_tty_poll(struct tty_struct *tty, 819 struct file *filp, poll_table *wait) 820 { 821 return 0; 822 } 823 824 static struct tty_ldisc_ops hci_uart_ldisc = { 825 .owner = THIS_MODULE, 826 .num = N_HCI, 827 .name = "n_hci", 828 .open = hci_uart_tty_open, 829 .close = hci_uart_tty_close, 830 .read = hci_uart_tty_read, 831 .write = hci_uart_tty_write, 832 .ioctl = hci_uart_tty_ioctl, 833 .compat_ioctl = hci_uart_tty_ioctl, 834 .poll = hci_uart_tty_poll, 835 .receive_buf = hci_uart_tty_receive, 836 .write_wakeup = hci_uart_tty_wakeup, 837 }; 838 839 static int __init hci_uart_init(void) 840 { 841 int err; 842 843 BT_INFO("HCI UART driver ver %s", VERSION); 844 845 /* Register the tty discipline */ 846 err = tty_register_ldisc(&hci_uart_ldisc); 847 if (err) { 848 BT_ERR("HCI line discipline registration failed. (%d)", err); 849 return err; 850 } 851 852 #ifdef CONFIG_BT_HCIUART_H4 853 h4_init(); 854 #endif 855 #ifdef CONFIG_BT_HCIUART_BCSP 856 bcsp_init(); 857 #endif 858 #ifdef CONFIG_BT_HCIUART_LL 859 ll_init(); 860 #endif 861 #ifdef CONFIG_BT_HCIUART_ATH3K 862 ath_init(); 863 #endif 864 #ifdef CONFIG_BT_HCIUART_3WIRE 865 h5_init(); 866 #endif 867 #ifdef CONFIG_BT_HCIUART_INTEL 868 intel_init(); 869 #endif 870 #ifdef CONFIG_BT_HCIUART_BCM 871 bcm_init(); 872 #endif 873 #ifdef CONFIG_BT_HCIUART_QCA 874 qca_init(); 875 #endif 876 #ifdef CONFIG_BT_HCIUART_AG6XX 877 ag6xx_init(); 878 #endif 879 #ifdef CONFIG_BT_HCIUART_MRVL 880 mrvl_init(); 881 #endif 882 883 return 0; 884 } 885 886 static void __exit hci_uart_exit(void) 887 { 888 #ifdef CONFIG_BT_HCIUART_H4 889 h4_deinit(); 890 #endif 891 #ifdef CONFIG_BT_HCIUART_BCSP 892 bcsp_deinit(); 893 #endif 894 #ifdef CONFIG_BT_HCIUART_LL 895 ll_deinit(); 896 #endif 897 #ifdef CONFIG_BT_HCIUART_ATH3K 898 ath_deinit(); 899 #endif 900 #ifdef CONFIG_BT_HCIUART_3WIRE 901 h5_deinit(); 902 #endif 903 #ifdef CONFIG_BT_HCIUART_INTEL 904 intel_deinit(); 905 #endif 906 #ifdef CONFIG_BT_HCIUART_BCM 907 bcm_deinit(); 908 #endif 909 #ifdef CONFIG_BT_HCIUART_QCA 910 qca_deinit(); 911 #endif 912 #ifdef CONFIG_BT_HCIUART_AG6XX 913 ag6xx_deinit(); 914 #endif 915 #ifdef CONFIG_BT_HCIUART_MRVL 916 mrvl_deinit(); 917 #endif 918 919 tty_unregister_ldisc(&hci_uart_ldisc); 920 } 921 922 module_init(hci_uart_init); 923 module_exit(hci_uart_exit); 924 925 MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>"); 926 MODULE_DESCRIPTION("Bluetooth HCI UART driver ver " VERSION); 927 MODULE_VERSION(VERSION); 928 MODULE_LICENSE("GPL"); 929 MODULE_ALIAS_LDISC(N_HCI); 930