xref: /linux/drivers/char/ipmi/ipmi_smic_sm.c (revision 2da68a77)
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  * ipmi_smic_sm.c
4  *
5  * The state-machine driver for an IPMI SMIC driver
6  *
7  * It started as a copy of Corey Minyard's driver for the KSC interface
8  * and the kernel patch "mmcdev-patch-245" by HP
9  *
10  * modified by:	Hannes Schulz <schulz@schwaar.com>
11  *		ipmi@schwaar.com
12  *
13  *
14  * Corey Minyard's driver for the KSC interface has the following
15  * copyright notice:
16  *   Copyright 2002 MontaVista Software Inc.
17  *
18  * the kernel patch "mmcdev-patch-245" by HP has the following
19  * copyright notice:
20  * (c) Copyright 2001 Grant Grundler (c) Copyright
21  * 2001 Hewlett-Packard Company
22  */
23 
24 #define DEBUG /* So dev_dbg() is always available. */
25 
26 #include <linux/kernel.h> /* For printk. */
27 #include <linux/string.h>
28 #include <linux/module.h>
29 #include <linux/moduleparam.h>
30 #include <linux/ipmi_msgdefs.h>		/* for completion codes */
31 #include "ipmi_si_sm.h"
32 
33 /* smic_debug is a bit-field
34  *	SMIC_DEBUG_ENABLE -	turned on for now
35  *	SMIC_DEBUG_MSG -	commands and their responses
36  *	SMIC_DEBUG_STATES -	state machine
37 */
38 #define SMIC_DEBUG_STATES	4
39 #define SMIC_DEBUG_MSG		2
40 #define	SMIC_DEBUG_ENABLE	1
41 
42 static int smic_debug = 1;
43 module_param(smic_debug, int, 0644);
44 MODULE_PARM_DESC(smic_debug, "debug bitmask, 1=enable, 2=messages, 4=states");
45 
46 enum smic_states {
47 	SMIC_IDLE,
48 	SMIC_START_OP,
49 	SMIC_OP_OK,
50 	SMIC_WRITE_START,
51 	SMIC_WRITE_NEXT,
52 	SMIC_WRITE_END,
53 	SMIC_WRITE2READ,
54 	SMIC_READ_START,
55 	SMIC_READ_NEXT,
56 	SMIC_READ_END,
57 	SMIC_HOSED
58 };
59 
60 #define MAX_SMIC_READ_SIZE 80
61 #define MAX_SMIC_WRITE_SIZE 80
62 #define SMIC_MAX_ERROR_RETRIES 3
63 
64 /* Timeouts in microseconds. */
65 #define SMIC_RETRY_TIMEOUT (2*USEC_PER_SEC)
66 
67 /* SMIC Flags Register Bits */
68 #define SMIC_RX_DATA_READY	0x80
69 #define SMIC_TX_DATA_READY	0x40
70 
71 /*
72  * SMIC_SMI and SMIC_EVM_DATA_AVAIL are only used by
73  * a few systems, and then only by Systems Management
74  * Interrupts, not by the OS.  Always ignore these bits.
75  *
76  */
77 #define SMIC_SMI		0x10
78 #define SMIC_EVM_DATA_AVAIL	0x08
79 #define SMIC_SMS_DATA_AVAIL	0x04
80 #define SMIC_FLAG_BSY		0x01
81 
82 /* SMIC Error Codes */
83 #define	EC_NO_ERROR		0x00
84 #define	EC_ABORTED		0x01
85 #define	EC_ILLEGAL_CONTROL	0x02
86 #define	EC_NO_RESPONSE		0x03
87 #define	EC_ILLEGAL_COMMAND	0x04
88 #define	EC_BUFFER_FULL		0x05
89 
90 struct si_sm_data {
91 	enum smic_states state;
92 	struct si_sm_io *io;
93 	unsigned char	 write_data[MAX_SMIC_WRITE_SIZE];
94 	int		 write_pos;
95 	int		 write_count;
96 	int		 orig_write_count;
97 	unsigned char	 read_data[MAX_SMIC_READ_SIZE];
98 	int		 read_pos;
99 	int		 truncated;
100 	unsigned int	 error_retries;
101 	long		 smic_timeout;
102 };
103 
104 static unsigned int init_smic_data(struct si_sm_data *smic,
105 				   struct si_sm_io *io)
106 {
107 	smic->state = SMIC_IDLE;
108 	smic->io = io;
109 	smic->write_pos = 0;
110 	smic->write_count = 0;
111 	smic->orig_write_count = 0;
112 	smic->read_pos = 0;
113 	smic->error_retries = 0;
114 	smic->truncated = 0;
115 	smic->smic_timeout = SMIC_RETRY_TIMEOUT;
116 
117 	/* We use 3 bytes of I/O. */
118 	return 3;
119 }
120 
121 static int start_smic_transaction(struct si_sm_data *smic,
122 				  unsigned char *data, unsigned int size)
123 {
124 	unsigned int i;
125 
126 	if (size < 2)
127 		return IPMI_REQ_LEN_INVALID_ERR;
128 	if (size > MAX_SMIC_WRITE_SIZE)
129 		return IPMI_REQ_LEN_EXCEEDED_ERR;
130 
131 	if ((smic->state != SMIC_IDLE) && (smic->state != SMIC_HOSED)) {
132 		dev_warn(smic->io->dev,
133 			 "SMIC in invalid state %d\n", smic->state);
134 		return IPMI_NOT_IN_MY_STATE_ERR;
135 	}
136 
137 	if (smic_debug & SMIC_DEBUG_MSG) {
138 		dev_dbg(smic->io->dev, "%s -", __func__);
139 		for (i = 0; i < size; i++)
140 			pr_cont(" %02x", data[i]);
141 		pr_cont("\n");
142 	}
143 	smic->error_retries = 0;
144 	memcpy(smic->write_data, data, size);
145 	smic->write_count = size;
146 	smic->orig_write_count = size;
147 	smic->write_pos = 0;
148 	smic->read_pos = 0;
149 	smic->state = SMIC_START_OP;
150 	smic->smic_timeout = SMIC_RETRY_TIMEOUT;
151 	return 0;
152 }
153 
154 static int smic_get_result(struct si_sm_data *smic,
155 			   unsigned char *data, unsigned int length)
156 {
157 	int i;
158 
159 	if (smic_debug & SMIC_DEBUG_MSG) {
160 		dev_dbg(smic->io->dev, "smic_get result -");
161 		for (i = 0; i < smic->read_pos; i++)
162 			pr_cont(" %02x", smic->read_data[i]);
163 		pr_cont("\n");
164 	}
165 	if (length < smic->read_pos) {
166 		smic->read_pos = length;
167 		smic->truncated = 1;
168 	}
169 	memcpy(data, smic->read_data, smic->read_pos);
170 
171 	if ((length >= 3) && (smic->read_pos < 3)) {
172 		data[2] = IPMI_ERR_UNSPECIFIED;
173 		smic->read_pos = 3;
174 	}
175 	if (smic->truncated) {
176 		data[2] = IPMI_ERR_MSG_TRUNCATED;
177 		smic->truncated = 0;
178 	}
179 	return smic->read_pos;
180 }
181 
182 static inline unsigned char read_smic_flags(struct si_sm_data *smic)
183 {
184 	return smic->io->inputb(smic->io, 2);
185 }
186 
187 static inline unsigned char read_smic_status(struct si_sm_data *smic)
188 {
189 	return smic->io->inputb(smic->io, 1);
190 }
191 
192 static inline unsigned char read_smic_data(struct si_sm_data *smic)
193 {
194 	return smic->io->inputb(smic->io, 0);
195 }
196 
197 static inline void write_smic_flags(struct si_sm_data *smic,
198 				    unsigned char   flags)
199 {
200 	smic->io->outputb(smic->io, 2, flags);
201 }
202 
203 static inline void write_smic_control(struct si_sm_data *smic,
204 				      unsigned char   control)
205 {
206 	smic->io->outputb(smic->io, 1, control);
207 }
208 
209 static inline void write_si_sm_data(struct si_sm_data *smic,
210 				    unsigned char   data)
211 {
212 	smic->io->outputb(smic->io, 0, data);
213 }
214 
215 static inline void start_error_recovery(struct si_sm_data *smic, char *reason)
216 {
217 	(smic->error_retries)++;
218 	if (smic->error_retries > SMIC_MAX_ERROR_RETRIES) {
219 		if (smic_debug & SMIC_DEBUG_ENABLE)
220 			pr_warn("ipmi_smic_drv: smic hosed: %s\n", reason);
221 		smic->state = SMIC_HOSED;
222 	} else {
223 		smic->write_count = smic->orig_write_count;
224 		smic->write_pos = 0;
225 		smic->read_pos = 0;
226 		smic->state = SMIC_START_OP;
227 		smic->smic_timeout = SMIC_RETRY_TIMEOUT;
228 	}
229 }
230 
231 static inline void write_next_byte(struct si_sm_data *smic)
232 {
233 	write_si_sm_data(smic, smic->write_data[smic->write_pos]);
234 	(smic->write_pos)++;
235 	(smic->write_count)--;
236 }
237 
238 static inline void read_next_byte(struct si_sm_data *smic)
239 {
240 	if (smic->read_pos >= MAX_SMIC_READ_SIZE) {
241 		read_smic_data(smic);
242 		smic->truncated = 1;
243 	} else {
244 		smic->read_data[smic->read_pos] = read_smic_data(smic);
245 		smic->read_pos++;
246 	}
247 }
248 
249 /*  SMIC Control/Status Code Components */
250 #define	SMIC_GET_STATUS		0x00	/* Control form's name */
251 #define	SMIC_READY		0x00	/* Status  form's name */
252 #define	SMIC_WR_START		0x01	/* Unified Control/Status names... */
253 #define	SMIC_WR_NEXT		0x02
254 #define	SMIC_WR_END		0x03
255 #define	SMIC_RD_START		0x04
256 #define	SMIC_RD_NEXT		0x05
257 #define	SMIC_RD_END		0x06
258 #define	SMIC_CODE_MASK		0x0f
259 
260 #define	SMIC_CONTROL		0x00
261 #define	SMIC_STATUS		0x80
262 #define	SMIC_CS_MASK		0x80
263 
264 #define	SMIC_SMS		0x40
265 #define	SMIC_SMM		0x60
266 #define	SMIC_STREAM_MASK	0x60
267 
268 /*  SMIC Control Codes */
269 #define	SMIC_CC_SMS_GET_STATUS	(SMIC_CONTROL|SMIC_SMS|SMIC_GET_STATUS)
270 #define	SMIC_CC_SMS_WR_START	(SMIC_CONTROL|SMIC_SMS|SMIC_WR_START)
271 #define	SMIC_CC_SMS_WR_NEXT	(SMIC_CONTROL|SMIC_SMS|SMIC_WR_NEXT)
272 #define	SMIC_CC_SMS_WR_END	(SMIC_CONTROL|SMIC_SMS|SMIC_WR_END)
273 #define	SMIC_CC_SMS_RD_START	(SMIC_CONTROL|SMIC_SMS|SMIC_RD_START)
274 #define	SMIC_CC_SMS_RD_NEXT	(SMIC_CONTROL|SMIC_SMS|SMIC_RD_NEXT)
275 #define	SMIC_CC_SMS_RD_END	(SMIC_CONTROL|SMIC_SMS|SMIC_RD_END)
276 
277 #define	SMIC_CC_SMM_GET_STATUS	(SMIC_CONTROL|SMIC_SMM|SMIC_GET_STATUS)
278 #define	SMIC_CC_SMM_WR_START	(SMIC_CONTROL|SMIC_SMM|SMIC_WR_START)
279 #define	SMIC_CC_SMM_WR_NEXT	(SMIC_CONTROL|SMIC_SMM|SMIC_WR_NEXT)
280 #define	SMIC_CC_SMM_WR_END	(SMIC_CONTROL|SMIC_SMM|SMIC_WR_END)
281 #define	SMIC_CC_SMM_RD_START	(SMIC_CONTROL|SMIC_SMM|SMIC_RD_START)
282 #define	SMIC_CC_SMM_RD_NEXT	(SMIC_CONTROL|SMIC_SMM|SMIC_RD_NEXT)
283 #define	SMIC_CC_SMM_RD_END	(SMIC_CONTROL|SMIC_SMM|SMIC_RD_END)
284 
285 /*  SMIC Status Codes */
286 #define	SMIC_SC_SMS_READY	(SMIC_STATUS|SMIC_SMS|SMIC_READY)
287 #define	SMIC_SC_SMS_WR_START	(SMIC_STATUS|SMIC_SMS|SMIC_WR_START)
288 #define	SMIC_SC_SMS_WR_NEXT	(SMIC_STATUS|SMIC_SMS|SMIC_WR_NEXT)
289 #define	SMIC_SC_SMS_WR_END	(SMIC_STATUS|SMIC_SMS|SMIC_WR_END)
290 #define	SMIC_SC_SMS_RD_START	(SMIC_STATUS|SMIC_SMS|SMIC_RD_START)
291 #define	SMIC_SC_SMS_RD_NEXT	(SMIC_STATUS|SMIC_SMS|SMIC_RD_NEXT)
292 #define	SMIC_SC_SMS_RD_END	(SMIC_STATUS|SMIC_SMS|SMIC_RD_END)
293 
294 #define	SMIC_SC_SMM_READY	(SMIC_STATUS|SMIC_SMM|SMIC_READY)
295 #define	SMIC_SC_SMM_WR_START	(SMIC_STATUS|SMIC_SMM|SMIC_WR_START)
296 #define	SMIC_SC_SMM_WR_NEXT	(SMIC_STATUS|SMIC_SMM|SMIC_WR_NEXT)
297 #define	SMIC_SC_SMM_WR_END	(SMIC_STATUS|SMIC_SMM|SMIC_WR_END)
298 #define	SMIC_SC_SMM_RD_START	(SMIC_STATUS|SMIC_SMM|SMIC_RD_START)
299 #define	SMIC_SC_SMM_RD_NEXT	(SMIC_STATUS|SMIC_SMM|SMIC_RD_NEXT)
300 #define	SMIC_SC_SMM_RD_END	(SMIC_STATUS|SMIC_SMM|SMIC_RD_END)
301 
302 /* these are the control/status codes we actually use
303 	SMIC_CC_SMS_GET_STATUS	0x40
304 	SMIC_CC_SMS_WR_START	0x41
305 	SMIC_CC_SMS_WR_NEXT	0x42
306 	SMIC_CC_SMS_WR_END	0x43
307 	SMIC_CC_SMS_RD_START	0x44
308 	SMIC_CC_SMS_RD_NEXT	0x45
309 	SMIC_CC_SMS_RD_END	0x46
310 
311 	SMIC_SC_SMS_READY	0xC0
312 	SMIC_SC_SMS_WR_START	0xC1
313 	SMIC_SC_SMS_WR_NEXT	0xC2
314 	SMIC_SC_SMS_WR_END	0xC3
315 	SMIC_SC_SMS_RD_START	0xC4
316 	SMIC_SC_SMS_RD_NEXT	0xC5
317 	SMIC_SC_SMS_RD_END	0xC6
318 */
319 
320 static enum si_sm_result smic_event(struct si_sm_data *smic, long time)
321 {
322 	unsigned char status;
323 	unsigned char flags;
324 	unsigned char data;
325 
326 	if (smic->state == SMIC_HOSED) {
327 		init_smic_data(smic, smic->io);
328 		return SI_SM_HOSED;
329 	}
330 	if (smic->state != SMIC_IDLE) {
331 		if (smic_debug & SMIC_DEBUG_STATES)
332 			dev_dbg(smic->io->dev,
333 				"%s - smic->smic_timeout = %ld, time = %ld\n",
334 				__func__, smic->smic_timeout, time);
335 		/*
336 		 * FIXME: smic_event is sometimes called with time >
337 		 * SMIC_RETRY_TIMEOUT
338 		 */
339 		if (time < SMIC_RETRY_TIMEOUT) {
340 			smic->smic_timeout -= time;
341 			if (smic->smic_timeout < 0) {
342 				start_error_recovery(smic, "smic timed out.");
343 				return SI_SM_CALL_WITH_DELAY;
344 			}
345 		}
346 	}
347 	flags = read_smic_flags(smic);
348 	if (flags & SMIC_FLAG_BSY)
349 		return SI_SM_CALL_WITH_DELAY;
350 
351 	status = read_smic_status(smic);
352 	if (smic_debug & SMIC_DEBUG_STATES)
353 		dev_dbg(smic->io->dev,
354 			"%s - state = %d, flags = 0x%02x, status = 0x%02x\n",
355 			__func__, smic->state, flags, status);
356 
357 	switch (smic->state) {
358 	case SMIC_IDLE:
359 		/* in IDLE we check for available messages */
360 		if (flags & SMIC_SMS_DATA_AVAIL)
361 			return SI_SM_ATTN;
362 		return SI_SM_IDLE;
363 
364 	case SMIC_START_OP:
365 		/* sanity check whether smic is really idle */
366 		write_smic_control(smic, SMIC_CC_SMS_GET_STATUS);
367 		write_smic_flags(smic, flags | SMIC_FLAG_BSY);
368 		smic->state = SMIC_OP_OK;
369 		break;
370 
371 	case SMIC_OP_OK:
372 		if (status != SMIC_SC_SMS_READY) {
373 			/* this should not happen */
374 			start_error_recovery(smic,
375 					     "state = SMIC_OP_OK,"
376 					     " status != SMIC_SC_SMS_READY");
377 			return SI_SM_CALL_WITH_DELAY;
378 		}
379 		/* OK so far; smic is idle let us start ... */
380 		write_smic_control(smic, SMIC_CC_SMS_WR_START);
381 		write_next_byte(smic);
382 		write_smic_flags(smic, flags | SMIC_FLAG_BSY);
383 		smic->state = SMIC_WRITE_START;
384 		break;
385 
386 	case SMIC_WRITE_START:
387 		if (status != SMIC_SC_SMS_WR_START) {
388 			start_error_recovery(smic,
389 					     "state = SMIC_WRITE_START, "
390 					     "status != SMIC_SC_SMS_WR_START");
391 			return SI_SM_CALL_WITH_DELAY;
392 		}
393 		/*
394 		 * we must not issue WR_(NEXT|END) unless
395 		 * TX_DATA_READY is set
396 		 * */
397 		if (flags & SMIC_TX_DATA_READY) {
398 			if (smic->write_count == 1) {
399 				/* last byte */
400 				write_smic_control(smic, SMIC_CC_SMS_WR_END);
401 				smic->state = SMIC_WRITE_END;
402 			} else {
403 				write_smic_control(smic, SMIC_CC_SMS_WR_NEXT);
404 				smic->state = SMIC_WRITE_NEXT;
405 			}
406 			write_next_byte(smic);
407 			write_smic_flags(smic, flags | SMIC_FLAG_BSY);
408 		} else
409 			return SI_SM_CALL_WITH_DELAY;
410 		break;
411 
412 	case SMIC_WRITE_NEXT:
413 		if (status != SMIC_SC_SMS_WR_NEXT) {
414 			start_error_recovery(smic,
415 					     "state = SMIC_WRITE_NEXT, "
416 					     "status != SMIC_SC_SMS_WR_NEXT");
417 			return SI_SM_CALL_WITH_DELAY;
418 		}
419 		/* this is the same code as in SMIC_WRITE_START */
420 		if (flags & SMIC_TX_DATA_READY) {
421 			if (smic->write_count == 1) {
422 				write_smic_control(smic, SMIC_CC_SMS_WR_END);
423 				smic->state = SMIC_WRITE_END;
424 			} else {
425 				write_smic_control(smic, SMIC_CC_SMS_WR_NEXT);
426 				smic->state = SMIC_WRITE_NEXT;
427 			}
428 			write_next_byte(smic);
429 			write_smic_flags(smic, flags | SMIC_FLAG_BSY);
430 		} else
431 			return SI_SM_CALL_WITH_DELAY;
432 		break;
433 
434 	case SMIC_WRITE_END:
435 		if (status != SMIC_SC_SMS_WR_END) {
436 			start_error_recovery(smic,
437 					     "state = SMIC_WRITE_END, "
438 					     "status != SMIC_SC_SMS_WR_END");
439 			return SI_SM_CALL_WITH_DELAY;
440 		}
441 		/* data register holds an error code */
442 		data = read_smic_data(smic);
443 		if (data != 0) {
444 			if (smic_debug & SMIC_DEBUG_ENABLE)
445 				dev_dbg(smic->io->dev,
446 					"SMIC_WRITE_END: data = %02x\n",
447 					data);
448 			start_error_recovery(smic,
449 					     "state = SMIC_WRITE_END, "
450 					     "data != SUCCESS");
451 			return SI_SM_CALL_WITH_DELAY;
452 		} else
453 			smic->state = SMIC_WRITE2READ;
454 		break;
455 
456 	case SMIC_WRITE2READ:
457 		/*
458 		 * we must wait for RX_DATA_READY to be set before we
459 		 * can continue
460 		 */
461 		if (flags & SMIC_RX_DATA_READY) {
462 			write_smic_control(smic, SMIC_CC_SMS_RD_START);
463 			write_smic_flags(smic, flags | SMIC_FLAG_BSY);
464 			smic->state = SMIC_READ_START;
465 		} else
466 			return SI_SM_CALL_WITH_DELAY;
467 		break;
468 
469 	case SMIC_READ_START:
470 		if (status != SMIC_SC_SMS_RD_START) {
471 			start_error_recovery(smic,
472 					     "state = SMIC_READ_START, "
473 					     "status != SMIC_SC_SMS_RD_START");
474 			return SI_SM_CALL_WITH_DELAY;
475 		}
476 		if (flags & SMIC_RX_DATA_READY) {
477 			read_next_byte(smic);
478 			write_smic_control(smic, SMIC_CC_SMS_RD_NEXT);
479 			write_smic_flags(smic, flags | SMIC_FLAG_BSY);
480 			smic->state = SMIC_READ_NEXT;
481 		} else
482 			return SI_SM_CALL_WITH_DELAY;
483 		break;
484 
485 	case SMIC_READ_NEXT:
486 		switch (status) {
487 		/*
488 		 * smic tells us that this is the last byte to be read
489 		 * --> clean up
490 		 */
491 		case SMIC_SC_SMS_RD_END:
492 			read_next_byte(smic);
493 			write_smic_control(smic, SMIC_CC_SMS_RD_END);
494 			write_smic_flags(smic, flags | SMIC_FLAG_BSY);
495 			smic->state = SMIC_READ_END;
496 			break;
497 		case SMIC_SC_SMS_RD_NEXT:
498 			if (flags & SMIC_RX_DATA_READY) {
499 				read_next_byte(smic);
500 				write_smic_control(smic, SMIC_CC_SMS_RD_NEXT);
501 				write_smic_flags(smic, flags | SMIC_FLAG_BSY);
502 				smic->state = SMIC_READ_NEXT;
503 			} else
504 				return SI_SM_CALL_WITH_DELAY;
505 			break;
506 		default:
507 			start_error_recovery(
508 				smic,
509 				"state = SMIC_READ_NEXT, "
510 				"status != SMIC_SC_SMS_RD_(NEXT|END)");
511 			return SI_SM_CALL_WITH_DELAY;
512 		}
513 		break;
514 
515 	case SMIC_READ_END:
516 		if (status != SMIC_SC_SMS_READY) {
517 			start_error_recovery(smic,
518 					     "state = SMIC_READ_END, "
519 					     "status != SMIC_SC_SMS_READY");
520 			return SI_SM_CALL_WITH_DELAY;
521 		}
522 		data = read_smic_data(smic);
523 		/* data register holds an error code */
524 		if (data != 0) {
525 			if (smic_debug & SMIC_DEBUG_ENABLE)
526 				dev_dbg(smic->io->dev,
527 					"SMIC_READ_END: data = %02x\n",
528 					data);
529 			start_error_recovery(smic,
530 					     "state = SMIC_READ_END, "
531 					     "data != SUCCESS");
532 			return SI_SM_CALL_WITH_DELAY;
533 		} else {
534 			smic->state = SMIC_IDLE;
535 			return SI_SM_TRANSACTION_COMPLETE;
536 		}
537 
538 	case SMIC_HOSED:
539 		init_smic_data(smic, smic->io);
540 		return SI_SM_HOSED;
541 
542 	default:
543 		if (smic_debug & SMIC_DEBUG_ENABLE) {
544 			dev_dbg(smic->io->dev,
545 				"smic->state = %d\n", smic->state);
546 			start_error_recovery(smic, "state = UNKNOWN");
547 			return SI_SM_CALL_WITH_DELAY;
548 		}
549 	}
550 	smic->smic_timeout = SMIC_RETRY_TIMEOUT;
551 	return SI_SM_CALL_WITHOUT_DELAY;
552 }
553 
554 static int smic_detect(struct si_sm_data *smic)
555 {
556 	/*
557 	 * It's impossible for the SMIC fnags register to be all 1's,
558 	 * (assuming a properly functioning, self-initialized BMC)
559 	 * but that's what you get from reading a bogus address, so we
560 	 * test that first.
561 	 */
562 	if (read_smic_flags(smic) == 0xff)
563 		return 1;
564 
565 	return 0;
566 }
567 
568 static void smic_cleanup(struct si_sm_data *kcs)
569 {
570 }
571 
572 static int smic_size(void)
573 {
574 	return sizeof(struct si_sm_data);
575 }
576 
577 const struct si_sm_handlers smic_smi_handlers = {
578 	.init_data         = init_smic_data,
579 	.start_transaction = start_smic_transaction,
580 	.get_result        = smic_get_result,
581 	.event             = smic_event,
582 	.detect            = smic_detect,
583 	.cleanup           = smic_cleanup,
584 	.size              = smic_size,
585 };
586