xref: /linux/drivers/clk/sunxi/clk-mod0.c (revision 2da68a77)
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  * Copyright 2013 Emilio López
4  *
5  * Emilio López <emilio@elopez.com.ar>
6  */
7 
8 #include <linux/clk.h>
9 #include <linux/clk-provider.h>
10 #include <linux/io.h>
11 #include <linux/of_address.h>
12 #include <linux/platform_device.h>
13 #include <linux/slab.h>
14 
15 #include "clk-factors.h"
16 
17 /*
18  * sun4i_a10_get_mod0_factors() - calculates m, n factors for MOD0-style clocks
19  * MOD0 rate is calculated as follows
20  * rate = (parent_rate >> p) / (m + 1);
21  */
22 
23 static void sun4i_a10_get_mod0_factors(struct factors_request *req)
24 {
25 	u8 div, calcm, calcp;
26 
27 	/* These clocks can only divide, so we will never be able to achieve
28 	 * frequencies higher than the parent frequency */
29 	if (req->rate > req->parent_rate)
30 		req->rate = req->parent_rate;
31 
32 	div = DIV_ROUND_UP(req->parent_rate, req->rate);
33 
34 	if (div < 16)
35 		calcp = 0;
36 	else if (div / 2 < 16)
37 		calcp = 1;
38 	else if (div / 4 < 16)
39 		calcp = 2;
40 	else
41 		calcp = 3;
42 
43 	calcm = DIV_ROUND_UP(div, 1 << calcp);
44 
45 	req->rate = (req->parent_rate >> calcp) / calcm;
46 	req->m = calcm - 1;
47 	req->p = calcp;
48 }
49 
50 /* user manual says "n" but it's really "p" */
51 static const struct clk_factors_config sun4i_a10_mod0_config = {
52 	.mshift = 0,
53 	.mwidth = 4,
54 	.pshift = 16,
55 	.pwidth = 2,
56 };
57 
58 static const struct factors_data sun4i_a10_mod0_data = {
59 	.enable = 31,
60 	.mux = 24,
61 	.muxmask = BIT(1) | BIT(0),
62 	.table = &sun4i_a10_mod0_config,
63 	.getter = sun4i_a10_get_mod0_factors,
64 };
65 
66 static DEFINE_SPINLOCK(sun4i_a10_mod0_lock);
67 
68 static void __init sun4i_a10_mod0_setup(struct device_node *node)
69 {
70 	void __iomem *reg;
71 
72 	reg = of_iomap(node, 0);
73 	if (!reg) {
74 		/*
75 		 * This happens with mod0 clk nodes instantiated through
76 		 * mfd, as those do not have their resources assigned at
77 		 * CLK_OF_DECLARE time yet, so do not print an error.
78 		 */
79 		return;
80 	}
81 
82 	sunxi_factors_register(node, &sun4i_a10_mod0_data,
83 			       &sun4i_a10_mod0_lock, reg);
84 }
85 CLK_OF_DECLARE_DRIVER(sun4i_a10_mod0, "allwinner,sun4i-a10-mod0-clk",
86 		      sun4i_a10_mod0_setup);
87 
88 static int sun4i_a10_mod0_clk_probe(struct platform_device *pdev)
89 {
90 	struct device_node *np = pdev->dev.of_node;
91 	void __iomem *reg;
92 
93 	if (!np)
94 		return -ENODEV;
95 
96 	reg = devm_platform_ioremap_resource(pdev, 0);
97 	if (IS_ERR(reg))
98 		return PTR_ERR(reg);
99 
100 	sunxi_factors_register(np, &sun4i_a10_mod0_data,
101 			       &sun4i_a10_mod0_lock, reg);
102 	return 0;
103 }
104 
105 static const struct of_device_id sun4i_a10_mod0_clk_dt_ids[] = {
106 	{ .compatible = "allwinner,sun4i-a10-mod0-clk" },
107 	{ /* sentinel */ }
108 };
109 
110 static struct platform_driver sun4i_a10_mod0_clk_driver = {
111 	.driver = {
112 		.name = "sun4i-a10-mod0-clk",
113 		.of_match_table = sun4i_a10_mod0_clk_dt_ids,
114 	},
115 	.probe = sun4i_a10_mod0_clk_probe,
116 };
117 builtin_platform_driver(sun4i_a10_mod0_clk_driver);
118 
119 static const struct factors_data sun9i_a80_mod0_data __initconst = {
120 	.enable = 31,
121 	.mux = 24,
122 	.muxmask = BIT(3) | BIT(2) | BIT(1) | BIT(0),
123 	.table = &sun4i_a10_mod0_config,
124 	.getter = sun4i_a10_get_mod0_factors,
125 };
126 
127 static void __init sun9i_a80_mod0_setup(struct device_node *node)
128 {
129 	void __iomem *reg;
130 
131 	reg = of_io_request_and_map(node, 0, of_node_full_name(node));
132 	if (IS_ERR(reg)) {
133 		pr_err("Could not get registers for mod0-clk: %pOFn\n",
134 		       node);
135 		return;
136 	}
137 
138 	sunxi_factors_register(node, &sun9i_a80_mod0_data,
139 			       &sun4i_a10_mod0_lock, reg);
140 }
141 CLK_OF_DECLARE(sun9i_a80_mod0, "allwinner,sun9i-a80-mod0-clk", sun9i_a80_mod0_setup);
142 
143 static DEFINE_SPINLOCK(sun5i_a13_mbus_lock);
144 
145 static void __init sun5i_a13_mbus_setup(struct device_node *node)
146 {
147 	void __iomem *reg;
148 
149 	reg = of_iomap(node, 0);
150 	if (!reg) {
151 		pr_err("Could not get registers for a13-mbus-clk\n");
152 		return;
153 	}
154 
155 	/* The MBUS clocks needs to be always enabled */
156 	sunxi_factors_register_critical(node, &sun4i_a10_mod0_data,
157 					&sun5i_a13_mbus_lock, reg);
158 }
159 CLK_OF_DECLARE(sun5i_a13_mbus, "allwinner,sun5i-a13-mbus-clk", sun5i_a13_mbus_setup);
160 
161 struct mmc_phase {
162 	struct clk_hw		hw;
163 	u8			offset;
164 	void __iomem		*reg;
165 	spinlock_t		*lock;
166 };
167 
168 #define to_mmc_phase(_hw) container_of(_hw, struct mmc_phase, hw)
169 
170 static int mmc_get_phase(struct clk_hw *hw)
171 {
172 	struct clk *mmc, *mmc_parent, *clk = hw->clk;
173 	struct mmc_phase *phase = to_mmc_phase(hw);
174 	unsigned int mmc_rate, mmc_parent_rate;
175 	u16 step, mmc_div;
176 	u32 value;
177 	u8 delay;
178 
179 	value = readl(phase->reg);
180 	delay = (value >> phase->offset) & 0x3;
181 
182 	if (!delay)
183 		return 180;
184 
185 	/* Get the main MMC clock */
186 	mmc = clk_get_parent(clk);
187 	if (!mmc)
188 		return -EINVAL;
189 
190 	/* And its rate */
191 	mmc_rate = clk_get_rate(mmc);
192 	if (!mmc_rate)
193 		return -EINVAL;
194 
195 	/* Now, get the MMC parent (most likely some PLL) */
196 	mmc_parent = clk_get_parent(mmc);
197 	if (!mmc_parent)
198 		return -EINVAL;
199 
200 	/* And its rate */
201 	mmc_parent_rate = clk_get_rate(mmc_parent);
202 	if (!mmc_parent_rate)
203 		return -EINVAL;
204 
205 	/* Get MMC clock divider */
206 	mmc_div = mmc_parent_rate / mmc_rate;
207 
208 	step = DIV_ROUND_CLOSEST(360, mmc_div);
209 	return delay * step;
210 }
211 
212 static int mmc_set_phase(struct clk_hw *hw, int degrees)
213 {
214 	struct clk *mmc, *mmc_parent, *clk = hw->clk;
215 	struct mmc_phase *phase = to_mmc_phase(hw);
216 	unsigned int mmc_rate, mmc_parent_rate;
217 	unsigned long flags;
218 	u32 value;
219 	u8 delay;
220 
221 	/* Get the main MMC clock */
222 	mmc = clk_get_parent(clk);
223 	if (!mmc)
224 		return -EINVAL;
225 
226 	/* And its rate */
227 	mmc_rate = clk_get_rate(mmc);
228 	if (!mmc_rate)
229 		return -EINVAL;
230 
231 	/* Now, get the MMC parent (most likely some PLL) */
232 	mmc_parent = clk_get_parent(mmc);
233 	if (!mmc_parent)
234 		return -EINVAL;
235 
236 	/* And its rate */
237 	mmc_parent_rate = clk_get_rate(mmc_parent);
238 	if (!mmc_parent_rate)
239 		return -EINVAL;
240 
241 	if (degrees != 180) {
242 		u16 step, mmc_div;
243 
244 		/* Get MMC clock divider */
245 		mmc_div = mmc_parent_rate / mmc_rate;
246 
247 		/*
248 		 * We can only outphase the clocks by multiple of the
249 		 * PLL's period.
250 		 *
251 		 * Since the MMC clock in only a divider, and the
252 		 * formula to get the outphasing in degrees is deg =
253 		 * 360 * delta / period
254 		 *
255 		 * If we simplify this formula, we can see that the
256 		 * only thing that we're concerned about is the number
257 		 * of period we want to outphase our clock from, and
258 		 * the divider set by the MMC clock.
259 		 */
260 		step = DIV_ROUND_CLOSEST(360, mmc_div);
261 		delay = DIV_ROUND_CLOSEST(degrees, step);
262 	} else {
263 		delay = 0;
264 	}
265 
266 	spin_lock_irqsave(phase->lock, flags);
267 	value = readl(phase->reg);
268 	value &= ~GENMASK(phase->offset + 3, phase->offset);
269 	value |= delay << phase->offset;
270 	writel(value, phase->reg);
271 	spin_unlock_irqrestore(phase->lock, flags);
272 
273 	return 0;
274 }
275 
276 static const struct clk_ops mmc_clk_ops = {
277 	.get_phase	= mmc_get_phase,
278 	.set_phase	= mmc_set_phase,
279 };
280 
281 /*
282  * sunxi_mmc_setup - Common setup function for mmc module clocks
283  *
284  * The only difference between module clocks on different platforms is the
285  * width of the mux register bits and the valid values, which are passed in
286  * through struct factors_data. The phase clocks parts are identical.
287  */
288 static void __init sunxi_mmc_setup(struct device_node *node,
289 				   const struct factors_data *data,
290 				   spinlock_t *lock)
291 {
292 	struct clk_onecell_data *clk_data;
293 	const char *parent;
294 	void __iomem *reg;
295 	int i;
296 
297 	reg = of_io_request_and_map(node, 0, of_node_full_name(node));
298 	if (IS_ERR(reg)) {
299 		pr_err("Couldn't map the %pOFn clock registers\n", node);
300 		return;
301 	}
302 
303 	clk_data = kmalloc(sizeof(*clk_data), GFP_KERNEL);
304 	if (!clk_data)
305 		return;
306 
307 	clk_data->clks = kcalloc(3, sizeof(*clk_data->clks), GFP_KERNEL);
308 	if (!clk_data->clks)
309 		goto err_free_data;
310 
311 	clk_data->clk_num = 3;
312 	clk_data->clks[0] = sunxi_factors_register(node, data, lock, reg);
313 	if (!clk_data->clks[0])
314 		goto err_free_clks;
315 
316 	parent = __clk_get_name(clk_data->clks[0]);
317 
318 	for (i = 1; i < 3; i++) {
319 		struct clk_init_data init = {
320 			.num_parents	= 1,
321 			.parent_names	= &parent,
322 			.ops		= &mmc_clk_ops,
323 		};
324 		struct mmc_phase *phase;
325 
326 		phase = kmalloc(sizeof(*phase), GFP_KERNEL);
327 		if (!phase)
328 			continue;
329 
330 		phase->hw.init = &init;
331 		phase->reg = reg;
332 		phase->lock = lock;
333 
334 		if (i == 1)
335 			phase->offset = 8;
336 		else
337 			phase->offset = 20;
338 
339 		if (of_property_read_string_index(node, "clock-output-names",
340 						  i, &init.name))
341 			init.name = node->name;
342 
343 		clk_data->clks[i] = clk_register(NULL, &phase->hw);
344 		if (IS_ERR(clk_data->clks[i])) {
345 			kfree(phase);
346 			continue;
347 		}
348 	}
349 
350 	of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
351 
352 	return;
353 
354 err_free_clks:
355 	kfree(clk_data->clks);
356 err_free_data:
357 	kfree(clk_data);
358 }
359 
360 static DEFINE_SPINLOCK(sun4i_a10_mmc_lock);
361 
362 static void __init sun4i_a10_mmc_setup(struct device_node *node)
363 {
364 	sunxi_mmc_setup(node, &sun4i_a10_mod0_data, &sun4i_a10_mmc_lock);
365 }
366 CLK_OF_DECLARE(sun4i_a10_mmc, "allwinner,sun4i-a10-mmc-clk", sun4i_a10_mmc_setup);
367 
368 static DEFINE_SPINLOCK(sun9i_a80_mmc_lock);
369 
370 static void __init sun9i_a80_mmc_setup(struct device_node *node)
371 {
372 	sunxi_mmc_setup(node, &sun9i_a80_mod0_data, &sun9i_a80_mmc_lock);
373 }
374 CLK_OF_DECLARE(sun9i_a80_mmc, "allwinner,sun9i-a80-mmc-clk", sun9i_a80_mmc_setup);
375